Re-install PE from PC to MacBook (my PC crashed)?

HELP! My PC crashed and I got a MacBook Pro in its place.
Can I re-install my PE onto my MacBook without having to buy another PE??

Yes, that's a good point, John Waller. Calif431, my post was for PSE 9 and up. For older versions you would need to buy it again. (Adobe theoretically has a crossgrade, but since you would have to pay the upgrade price for PSE 11, it's not worth it--cheaper just to buy PSE 11 someplace else.)

Similar Messages

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

How to install software from imac to macbook pro

how to install software from imac to macbook pro

Are you using one of the newer iMac's with no DVD drive? If so, you can either get an external CD/DVD drive (any make - doesn't have to be Apple) or, if you have another Mac on the same network that has a CD/DVD drive you may be able to do it by turning on 'DVD or CD Sharing' on that Mac (System Preferences>Sharing). Hopefully you'll see the disk on the Mac without the DVD drive and be able to install from there.

How do I install iWork from my old MacBook on my new iMac?

I bought a multi license iWork cd back in 2009 and I want to install it on my new iMac. Is there any way to install it without using the remote disk option? Thanks!

Assuming you have one of the new models without an optical drive, you can either use remote disk from your older MacBook or buy a DVD player to attach to the new iMac...not a bad option if you are planning to burn DVDs.
You could also try to create a USB flash drive copy of the iWork disk and use that for the installation.

Installing pages from iPhone to macbook air...

I bought Pages on my iPhone and I want install this app to my new macbook air now for free. Is it possible install this app for free to macbook air? Thanks.

No they are 2 separate purchases for 2 separate OSes.
One for iOS bought from the iTunes store and,
One for Mac OSX bought from the Mac App Store.
They can then be used on as many of your iGadgets, or Macs using the same Apple I.D. and OS.
Peter

How do I install software from disk on Macbook Air?

I have an external CD player but the Macbook Air doesn't seem to recognise it. So how do I get my software from disk onto my Macbook?

I did not get the "This document is not recognised do you want to choose an application to open it with" error message. It's just that it is not recognizing any content at all on the CD in Finder. I have used this external CD drive before with this Macbook. I also tried to open the docs through Word and it again showed that a CD was in "Devices" as a "Remote Disc" but does not recognize any of the docs on the CD.

How do install Leopard from intel to ppc by Firewire?

Can anyone tell me how to install Leopard from my intel macbook to my older ppc? When I try to install from firewire it says that the drive is going to GUID and non-bootable. My DVD drive on the PPC isn't good enough for the Leopard DVD. Any suggestions are appreciated.

I'm not commenting on whether the type of Mac is compatible with the Leopard install.
I'll offer suggestion for the firewire install. The objective is to take the Leopard DVD and transfer in some way to a firewire drive to be able to boot a PPC Mac and complete a Leopard install to the PPC Mac.
How? Take a firewire external drive and partition it in two. One for your data and the other (7.2 gigs) max, for the ability to restore the Leopard DVD to that smaller partition. Once restored you'll be able to boot(using system startup control panel) and install Leopard to a PPC Mac.
The rule to follow is to use APM ie Apple Partition Map to boot PPC Macs. GUID mapping is for intel Macs. You use options within Disk Utility ti select which way to go. You cannot have both on one firewire hard drive. I use two firewire hard drives: one APM and the other GUID.
How to setup the small partition? Connect firewire drive to your PPC Mac. Open disk utility. Create your two partitions(remember when you do this the drive is formatted and all data is gone, so backup first). Remember to use option and select APM, although on a PPC Mac it should be by default and ditto if on an intel Mac for GUID. Once the partitioning is complete, select Restore and while using the left hand column(just read the instruction in the disk utility window) and assuming you now have the Leopard DVD on the desktop , drag the install OSX section from the left hand column to "source" and then drag the Leopard small partition from the left hand column to "destination." Wait 20 minutes and you are completed. Now you can boot from the firewire drive and install Leopard to a PPC Mac.

My Mid-2011 Macbook Air becomes extremely hot when installing apps from the Mac App Store and when deleting apps

My Mid-2011 Macbook Air 13-inch (OSX 10.8.1 Mountain Lion) becomes hot to the touch when trying to delete large documents, watching videos after waking it from sleep-mode and when installing applications from the Mac App Store. This has also been happening with OSX Lion before I upgraded it to Mountain Lion.

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
What needed to be done the day that you set up the new Mac was go into the Mac App Store (MAS), sign into your iTunes/MAS Apple ID, go to the Purchases pane and Accept the iLife apps that would have been there in a special section. That would have sent you Mac's unique identifier code to Apple's servers and verified that this Mac was eligible for the bundled iLife suite and then registered these apps into your MAS account.
You might try going to ~/Library/Caches/com.apple.appstore/adoption.plist, delete the adption plist, restart the Mac and then go to the Purchaes pane and see if you can Accept the apps into your account.

Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I

Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I need direction on how to reinstall -- HELP?

Hi bodegakc,
If you have the serial number then please use the below mentioned link to download the product you are looking for .
CS5.5
Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
You can also use creative cloud cleaner tool before installing.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Thanks
Nikhil Gupta

Installed apps from Macbook Pro Tiger disk to a Powerbook G4

I bought a used powerbook G4 that came with Tiger installed, but no tiger disk included in the sale (so i'll have to buy my own copy of it if i want to reinstall anything). Everything on the machine worked perfect... until one day.... okay here's the dumb thing i did: My friend has a new Macbook Pro (with Intel) and i hoped i could install programs from his Tiger disk that i didn't have on my computer (like Garage Band). So i put in his Tiger disk that came with his Macbook Pro (even though someone had advised me that it wouldn't work on a G4!) and in it i found a package of optional applications. I couldn't find and select Garage Band separately on the disk so i decided to just install all optional apps from that package. I figured my computer wouldn't let me even start all this if the Tiger disk was incompatible with my G4. Well, it did proceed along and I watched as it installed a bunch of standard programs i already had on my computer. But oh well i figured it wouldn't hurt anything to reinstall apps like that. Then, I just couldn't find a way to list and select individual programs to install, so i just gave up on the whole idea of getting my friend's Garage Band.
The next day some of my apps were acting funny. Had problems with Mail, Safari and Itunes. Fortunately, doing an update online fixed mail and safari. But itunes continues to not act right and it's always crashing and i have to force quit. Also my netzero software has become corrupted 2 times since the messing with the Macbook Pro tiger disk, and i've had to reinstall the ISP software. If i buy my own Tiger disk for G4 then i can reinstall itunes completely and hopefully that would solve it's problems. But i'm worried that when i messed with the Intel tiger disk i may have put some code on my hard disk that's harmful and useless to a G4 and could cause further problems down the road.
So my question is: Has anyone heard of this happening before and what would be the best thing for me to do? And i hope that if i must reinstall the whole OSX tiger, that i can use the "archive and install" mode so i won't lose any 3rd party software on my powerbook.
Thankyou for reading.
powerbook G4 Mac OS X (10.4.7) 10.4.6 installed then updated to 10.4.7

I would not advise an Archive and Install because it will preserve components of the old system such as your users folder (unless you opt not to do that) which may contain items that are now not compatible. Archive and Install also keeps applications that now are incompatible.
I would recommend the following:
1. Boot from your Tiger DVD. After the installer loads select your language and click on the Continue button, then select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
After formatting has completed quit DU and return to the installer. Now proceed with OS X installation.

Hello everyone! i have a new macbook pro and i want to download aperture. my app store says it is already installed (on my old macbook pro). how do i install aperture from the app store in this instance please?

hello everyone! i have a new macbook pro and i want to download aperture. my app store says it is already installed (on my old macbook pro). how do i install aperture from the app store in this instance please?

Are yoy sure that Apeture is not in the Applications folder of the new system? If it is move it to the trash and the App Store will let you download Aperture from it.
You will need to make sure you use the same Apple ID you used to purchase it in the past.
regards

Is it possible to install windows 7 on my macbook from a removable hard drive using boot camp? How would I do this?

Is it possible to install windows 7 on my macbook from a removable hard drive using boot camp?
How would I do this?

If you have Lion installed, and run Boot Camp, it will create the boot flash for you, just followe the tutorial on screen. As far as I remember, this was not possible prior to Lion.

I need to install cc on my new MacBook and remove it from my old MacBook. What is the best way of doing this?

Well, as above really. Should I just install again? Or do I export from my old MacBook?

Don't try exporting it. Adobe software needs to be installed.
On the new MacBook, sign in to creative.adobe.com with your Adobe ID, download the Cloud app then install your apps.
You can leave it installed and activated on the old MacBook since you're entitled to 2 simultaneous activations.
Or you can deactivate on the old MacBook. Launch any Cloud app and click Help > Sign Out. That will deactivate the entire suite.

Is it possible to remove my hard drive from the Macbook and install it in a new Macbook Pro?

I currently have a 2009 Macbook and am wanting to upgrade to a new Macbook Pro. I have upgraded my hard drive in the macbook to a 500gb and have a duel boot with Windows 7 installed with Boot Camp along with other software that I do not want to lose. Is it possible to remove my hard drive from the Macbook and install it in a new Macbook Pro?

A much better solution is to hook your two Mac together and the first time you start the new Mac and it asks if you wish to recover data from another Mac, answer yes. This will invoke Setup Assitant which will do the job for you but intelligently.
I know because I just used Setup Assitant. It worked like a charm.
Allan

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install, just installed and it greyed out.

Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti....

Re-install PE from PC to MacBook (my PC crashed)?

Similar Messages

Maybe you are looking for