Re-installation of Siebel gateway and server

Hi All,
Our development server on Windows 2003 server was down due to Windows OS corrupt issues.
The only option left with us now is to re-install Windows as well as Siebel 8 gateway&Server.
Our database is located on a separate instance, it is working fine.
I could not take the latest back up of our repository using DB Config utility / repository export utilities of Siebel.
My question is, can we simply reinstall the Siebel instance as the repository is anyways available in DB.
1) Is there any other precaution needs to be taken in my case. I can use the same TNS service name to connect the new instance to the DB right?
Please suggest, if I need to take any other actions.
Regards

Please make sure to take the backup of siebns.dat file and the configuration files (siebel.cfg, fins.cfg etc).
Thanks
Venkat

Similar Messages

  • C028 unable to connect to siebel gateway name server while enterprise installation

    Dear All,
    I am getting this error while setting up an enterprise in the gateway server.The configuration wizard is failing with the error
    "C028 unable to connect to siebel gateway name server"
    Kindly request to assist, the server needs to be delivered on priority
    I checked the gateway..cfg this seems to be fine and the gateway server is up and running.
    The name server log says the following,but the username and password of sadmin is same as configured in DB
    2021 2014-09-04 15:14:20 0000-00-00 00:00:00 +0100 00000000 001 003f 0001 09 GtwyNS 19368 1081086784 /data/siebel/sia811/gtwysrvr/log/NameSrvr.log 8.1.1 [21111] ENU
    DBCLog DBCLogError 1 0000000254084ba8:0 2014-09-04 15:14:20 ㈵″㐴8쾈䃬쯌䀔꼄ࢂ쯌䀔쾨䃬ȁ䀇꼄ࢂ,
    GenericLog GenericError 1 0000000254084ba8:0 2014-09-04 15:14:20 (secmgr.cpp (2679) err=4597538 sys=0) SBL-SEC-10018: ㈵″㐴8쾈䃬쯌䀔꼄ࢂ쯌䀔쾨䃬ȁ䀇꼄ࢂ,
    GenericLog GenericError 1 0000000254084ba8:0 2014-09-04 15:14:20 (secmgr.cpp (2735) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    GenericLog GenericError 1 0000000254084ba8:0 2014-09-04 15:14:20 (client.cpp (309) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    SisnTcpIp SisnSockError 1 0000000254084ba8:0 2014-09-04 15:14:20 1089268624: [TCPIP-server] recv() failed for sd=-1 (err=9 | Bad file descriptor)
    SisnTcpIp SisnSockError 1 0000000254084ba8:0 2014-09-04 15:14:20 1089268624: [TCPIP-server] send() failed for sd=-1 (err=9 | Bad file descriptor)
    DBCLog DBCLogError 1 0000000354084ba8:0 2014-09-04 15:14:20 ㈵″㐴8
    GenericLog GenericError 1 0000000354084ba8:0 2014-09-04 15:14:20 (secmgr.cpp (2679) err=4597538 sys=0) SBL-SEC-10018: ㈵″㐴8
    GenericLog GenericError 1 0000000354084ba8:0 2014-09-04 15:14:20 (secmgr.cpp (2735) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    GenericLog GenericError 1 0000000354084ba8:0 2014-09-04 15:14:20 (client.cpp (309) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    SisnTcpIp SisnSockError 1 0000000354084ba8:0 2014-09-04 15:14:20 1104309136: [TCPIP-server] recv() failed for sd=-1 (err=9 | Bad file descriptor)
    SisnTcpIp SisnSockError 1 0000000354084ba8:0 2014-09-04 15:14:20 1104309136: [TCPIP-server] send() failed for sd=-1 (err=9 | Bad file descriptor)
    DBCLog DBCLogError 1 0000000454084ba8:0 2014-09-04 15:14:31 ㈵″㐴8
    GenericLog GenericError 1 0000000454084ba8:0 2014-09-04 15:14:31 (secmgr.cpp (2679) err=4597538 sys=0) SBL-SEC-10018: ㈵″㐴8
    GenericLog GenericError 1 0000000454084ba8:0 2014-09-04 15:14:31 (secmgr.cpp (2735) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    GenericLog GenericError 1 0000000454084ba8:0 2014-09-04 15:14:31 (client.cpp (309) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    SisnTcpIp SisnSockError 1 0000000454084ba8:0 2014-09-04 15:14:31 1104309136: [TCPIP-server] recv() failed for sd=-1 (err=9 | Bad file descriptor)
    SisnTcpIp SisnSockError 1 0000000454084ba8:0 2014-09-04 15:14:31 1104309136: [TCPIP-server] send() failed for sd=-1 (err=9 | Bad file descriptor)
    Please let me know what else can be checked.Kindly request all to assist me because this server needs to be delivered asap.Let me know if more details is required. Please assist.I checked multiple possibilities even re configuring the gateway server :-( :-( 
    Regards,
    Pramodh

    Hi,
    i have the same problem, i want to use different schemas on db, i have the schema siebel/sadmin and other schema siebelA/sadminA, i'm installing siebel on linux redhat 6.5, and when i'm on Siebel Server Configuration and i write the user and passw sadminA/sadminA i get the error c028 C028 unable to connect to siebel gateway name server, i made the test by sqlplus using sadminA/sadminA and is ok, i made the test configuring to the schema siebel/sadmin and pass, i need to change some for siebel can work with another schema? i'm new here and i dont know if is correct to write my question here.
    Thanks in advance
    I add my gateway.cfg
    [InfraNameServer]
    EnableAuditTrail = FALSE
    [InfraSecMgr]
    SecAdptName = DBSecAdpt
    SecAdptMode = DB
    [DBSecAdpt]
    DBSecAdpt_SecAdptDllName = sscfsadb
    DataSourceName = ServerDataSrc
    DBSecAdpt_PropagateChange = TRUE
    [DataSources]
    ServerDataSrc            = Server
    LDAPSecAdpt              = LDAP
    [ServerDataSrc]
    Docked                   = TRUE
    ConnectString            = DemoEnt_DSN
    TableOwner               = SIEBELA
    DLL                      = sscdo90
    SqlStyle                 = OracleCBO
    MaxCachedCursors         = 16
    MaxCachedDataSets        = 16
    ReverseFillThreshold     = 100
    FileSystem               = /u01/app/siebel81/gtwysrvr/fs
    GatewayAddress           = awsdemo:2320
    EnterpriseServer         = DemoEnt
    CurrentSQLID             = %SQLID%
    MaxCursorSize            = -1
    PrefetchSize             = -1
    ChartServer              = localhost:8001
    ChartImageFormat         = png
    [LDAPSecAdpt]
    SecAdptDllName              = sscfldap
    ServerName                  = $(FQDNName)
    Port                        = $(Port)
    BaseDN                      = $(BaseDN)
    SharedCredentialsDN         = $(SharedCredentialsDN)
    UsernameAttributeType       = $(UsernameAttributeType)
    PasswordAttributeType       = $(PasswordAttributeType)
    CredentialsAttributeType    = $(CredentialsAttributeType)
    RolesAttributeType          = $(RolesAttributeType)
    SslDatabase                 = $(SslDatabase)
    ApplicationUser             = $(ApplicationUser)
    ApplicationPassword         = $(ApplicationPassword)
    HashDBPwd                   = $(HashDBPwd)
    PropagateChange             = $(PropagateChange)
    CRC                         = $(CRC)
    SingleSignOn                = $(SingleSignOn)
    TrustToken                  = $(TrustToken)
    UseAdapterUsername          = $(UseAdapterUsername)
    SiebelUsernameAttributeType = $(SiebelUsernameAttributeType)

  • Unable to connect siebel gateway name server during configuration enterprise server

    Hi,
    when I try to configure Siebel enterpise after entering the port of the gateway server name I get the following error: "Unable to connect gateway server name".
    I perform the following steps:
    1) Configuration Gateway Server Name
         Entered port TCP/IP = 2320
         Enable automaticaly start server gateway name server
         Show pop up "Configuration siebel succesful"
    2) Configuration Enterprise Server
         Entered name account authentication gateway server name = SADMIN
         Entered passoword account authentication gateway server name = SADMIN
         Entered name host gateway server name = VDIMTNSIEBEL01 (name my machine)
         Entered port TCP/IP gateway server name = 2320
         show pop up error : "Unable to connect gatawey server name"
    I can not find the log file in order to understand the issue.
    When I try to connect to the gateway from the browser with the url
    vdimtnsiebel01:2320 I get this screen mode:
    ???@??????? ?????????? ????????QÈ  ??? ??????????? ??? ??? ? ?h????
    and writes this log in the file "C:\siebel\8.1.1.0.0\ses\gtwysrvr\log\NameSrvr.log
    SisnapiLayerLog Error 1 0000001151c810a0:0 2013-06-25 10:11:27   4980: [SISNAPI]: Rx msg len=0 peer=VDIMTNSIEBEL01.ISCVDI.LOCAL avail=325 Hello expected session=13
    474554202F66617669636F6E2E69636F
    20485454502F312E310D0A486F73743A
    207664696D746E73696562656C30313A
    323332300D0A557365722D4167656E74
    3A204D6F7A696C6C612F352E30202857
    696E646F7773204E5420362E313B2057
    4F5736343B2072763A32312E30292047
    65636B6F2F3230313030313031204669

    Hi,
    Please clarify me the following.
    You specified the login name as 'SADMIN'. Is this the login id, that you used for your Operating System? "Entered name account authentication gateway server name" expects you to enter the NT login, not the DB login.
    You may also expected to specify your network name, if your login id is specific to a network. e.g Oracle\Rajkumar assuming that Oracle is your network and Rajkumar is the user name.
    You may not expected to have the DSN created, as Gateway may not be interested in knowing which DB you are connected to. And you neither enter the 'DB name' anywhere in the 'Gateway Server Configuration', if my understanding is right.
    Please confirm.
    Below pages are for reference (not directly relevant to your question):
    http://docs.oracle.com/cd/B40099_02/books/SiebInstWIN/SiebInstCOM_Prep18.html
    Bookshelf v8.0: Requirements for Siebel Gateway Name Server Installation and Configuration
    Thanks.
    Regards,
    Rajkumar Raju

  • Configuring Siebel Gateway Name Server on Linux 64 bit OS

    Hello Siebel Experts,
    I am currently installing Siebel 8.1.1.11 on a Linux 64-bit machine. After successfully completing the installation steps, I am proceeding with the configuring the server and its components.
    I am starting with the configuration of Siebel Gateway Name Server as per the instructions mentioned on the url:
    Bookshelf v8.1/8.2: Configuring the Siebel Enterprise
    I completed steps 1 and 2 and started executing step 3: Start the Siebel Enterprise Configuration Wizard.
    I provided all the necessary information till the summary information is displayed.
    However when I click next, it immediately gives an error.
    >>Siebel Configuration Wizard fails with error. Please check the log files for details.
    I searched for the log file in $SIEBEL_ROOT/cfgtoollogs/cfg/config_<date-time>.log
    However there is no error information in this log file. It contains just INFO, SECTION, STEP or ATTRIBUTE mappings/values.
    I could not find any .err file in this directory. Can you please let us know how to identify the error and debug this issue?
    Thanks in advance.
    Regards,
    Sadath

    Hi
    Thanks for your inputs.
    I have executed the said command and captured the output in the below file:
    https://docs.google.com/file/d/0By7-5z2zbQo9MUd5ek1mdTh1SU9yUzlZRzc2eDlFZFNrczR3
    I also executed env command and following is the output:
    [telkom@ucm1 bin]$ ./evt
    Running checks defined in file [evt.ini]. Please wait..
    ▒1990, 2006, Oracle. All rights reserved. The Programs (which include both the software and documentation) contain proprietary information; they are provided under a license agreement containing restrictions on use and disclosure and are also protected by copyright, patent, and other intellectual and industrial property laws. Reverse engineering, disassembly, or decompilation of the Programs, except to the extent required to obtain interoperability with other independently created software or as specified by law, is prohibited.
    Environment Verification Summary Report for [ucm1.cx.dev.telkom.co.id]
    Report Run by [telkom] on [Thu Jul 17 12:30:12 2014]
    Installed Version [NOT DETECTED] Installed Build [NOT DETECTED]
    Running a [8.1.1.9] version validation with [VAN] flavor
    Total Checks  : 4
    Checks Passed : 1
    Checks Failed : 3 (0 critical failures, 3 warnings)
    Checks Skipped: 0
    Critical Failures:
    Complete list of checks:
    Environment Settings
    The highest Operating System that we have certified is 2.6.32-100.37.1.el6 - the current version you are running is 3.8.13-35.1.2.el6uek.x86_64
    The current value of SIEBEL_OSD_LATCH is not defined
    The current value of SIEBEL_OSD_NLATCH  is not defined
    Environment variable SIEBEL_MEMORY_ALLOCATOR has correctly not been defined
    This exe file was created with the evaluation version of Perl2Exe.
    For more information visit http://www.indigostar.com
    (The full version does not display this message with a 2 second delay.)
    [telkom@ucm1 bin]$
    Thanks,
    Sadath

  • Siebel Gateway Name Server Configuration Wizard returns "Execution failed"

    Hi,
    I am installing Siebel 8.1.1.1 on Linux platform and now having problem while trying to configure Siebel Gateway Name Server.
    Steps done:
    1) DB instance prepared
    2) Created Siebel installation image
    3) Installed Siebel server and configured Gateway name server (the wizard started automatically as part of the installation). Skip configuration of Enterprise and SWSE Logical profile
    4) Ran DB Configuration Wizard for the primary language - successfully. Import repository-add language - successfully.
    5) Trying to Wizard "Configure Enterprise" - failed with "Execution failed"
    Here I thought that probably Gateway Nameserver was not configured and decided to remove the Gateway and create it from scratch.
    Unfortunately this time the Gateway configuration failed. Also with message"Execution failed"
    Here are the errors I got in the log files sw_cfg_util*.log
    <EF><BB><BF>2021 2012-01-25 16:14:56 2012-01-25 16:14:56 +0200 00000002 001 003f 0001 09 sw_cfg_util 17234 -1215752512 /OraSSO_tstcol/siebapp/server/siebsrvr/log/sw_cfg_util.log 8.1.1 [21111] ENU
    GenericLog GenericError 1 000000024f204352:0 2012-01-25 16:14:56 (svrconfig.cpp (2465) err=3023557 sys=0) SBL-CSO-08901: The required arguments are not specified.
    GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:56 Executing step: CreateGateway
    GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Step CreateGateway: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%srvrcfg with cmdline -u nouser -p nopassword -r %%SiebelRoot%% -g %%SiebelRoot%%%%OSDirSeparator%%sys%%OSDirSeparator%%siebns.dat::NSFILE: -r %%SiebelRoot%% -a gateway -l %%PrimaryLanguage%% -i %%SiebelRoot%%%%OSDirSeparator%%admin%%OSDirSeparator%%gtwydefs.dat
    GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Failed during Execution, err: 5500044
    Does anybody know what is the reason?
    Searching in Metalink and Google were fruitless..
    Thank you in advance.

    Just in case anybody bumps in this thread:
    The problem in my case was solved according with Oracle Note "Delete and create the "Siebel Server" via Configuration Wizard on Linux, it failed. [ID 880562.1]"
    Applies to:
    +Siebel CRM - Version: 8.1.1 SIA [21111] and later   [Release: V8 and later ]+
    Linux x86
    Symptoms
    Delete the "Siebel Server" once and then create a new "Siebel Server" via Siebel Server Configuration Wizard on Linux, it failed with message "Execution Failed".
    The error on sw_cfg_util_xx.log is as follows,
    GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:33 Executing step: AddSrvrRegistryEntry
    GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Step AddSrvrRegistryEntry: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl with cmdline -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%%
    GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Failed during Execution, err: 5500044
    Reproduce steps:
    - confirm that siebel server was created before, and is stopping.
    - create sh env and enter the following command to remove the Siebel Server.
    +$ cd $(SiebelServerRoot)+
    +$ . ./cfgenv.sh+
    +$ cd $(SiebelServerRoot)/bin+
    +$ ./ssincfgw+
    - select "3 - Remove Existing Configuration".
    - complete the configuration wizard.
    - enter the following command to create the Siebel Server.
    +$ cd $(SiebelServerRoot)+
    +$ . ./cfgenv.sh+
    +$ cd $(SiebelServerRoot)/bin+
    +$ ./ssincfgw+
    - select "1 - Create New Configuration".
    - continue inputs to finish and execute the configration.
    +==> you'll find "Execution Failed".+
    Cause
    AddSrvrRegistryEntry section shown in the log is the command for registering the Windows Service, and it is no need to execute on Linux env. However, it is executed and it failied.
    Solution
    You can do either of follows,
    +(1) Uninstall and Install the Siebel Server again.+
    +(2) The section to execute the Windows registeration command is specified on $(SiebelServerRoot)/admin/common.scm, line 2475-2477.+
    +[Step]+
    Name = AddSrvrRegistryEntry
    Type = RunProg %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl ' -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%% '
    So, delete the AddSrvrRegistryEntry section from common.scm, and execute Configuration Wizard again.
    Edited by: mmango on Jan 31, 2012 12:21 AM

  • CO28: Unable to connect to Siebel Gateway Name Server

    Hello.
    I'm trying to install Siebel on a WinXP machine to familiarize myself with the Case Management module from Siebel. I have tried many times, installing and uninstalling software. I keep getting this error message when configuring a new Enterprise. "CO28: Unable to connect to Siebel Gateway Name Server".
    I've shortened the hostname and removed dashes as prescribed in Siebel Bookshelf.
    I've always made sure the ODBC System DSN is working and authenticating correclty.
    Netstat shows gtwyns listening on 0.0.0.0:2320
    What am I missing?????

    Here's the log contents from sw_cfg_util.log:
    2021 2009-05-21 12:52:03 0000-00-00 00:00:00 -0700 00000000 001 003f 0001 09 sw_cfg_util 2992 1704 C:\sba8123\siebsrvr\log\sw_cfg_util.log 8.1.1 [21112] ENU
    GenericLog     GenericError     1     000000024a150bb0:0     2009-05-21 12:52:03     Error in transferring input values ,num of arrays incorrect 0, expected : 1
    GenericLog     GenericError     1     000000024a150bb0:0     2009-05-21 12:52:03     TransferInputsToValues returned error:3611539 to SetControlValues
    GenericLog     GenericError     1     0000031a4a150e34:0     2009-05-21 12:52:28     NSS - ErrCode 4597527 SysErr 0
    GenericLog     GenericError     1     0000031b4a150e34:0     2009-05-21 12:52:29     NSS - ErrCode 4597527 SysErr 0
    GenericLog     GenericError     1     0000031b4a150e34:0     2009-05-21 12:52:29     Validation failed : C028: Unable to connect to the Siebel Gateway Name Server 嗭粑୩୩୩୩୩୩୩
    GenericLog     GenericError     1     0000031b4a150e34:0     2009-05-21 12:52:29     ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server 嗭粑୩୩୩୩୩୩୩
    GenericLog     GenericError     1     0000031b4a150e34:0     2009-05-21 13:18:49     Error in transferring input values ,num of arrays incorrect 0, expected : 1
    GenericLog     GenericError     1     0000031b4a150e34:0     2009-05-21 13:18:49     TransferInputsToValues returned error:3611539 to SetControlValues
    GenericLog     GenericError     1     0000031c4a150e34:0     2009-05-21 13:18:52     NSS - ErrCode 4597527 SysErr 0
    GenericLog     GenericError     1     0000031c4a150e34:0     2009-05-21 13:18:52     Validation failed : C028: Unable to connect to the Siebel Gateway Name Server 嗭粑୩୩୩୩୩୩୩
    GenericLog     GenericError     1     0000031c4a150e34:0     2009-05-21 13:18:52     ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server 嗭粑୩୩୩୩୩୩୩

  • Siebel Gateway Name Server configuration error

    Hi,
    I installed Siebel 8.1.1.10 in Oracle Enterprise Linux 5.9. And use following command lines to configure Siebel Gateway Name Server.
    /opt/siebel/8.1.1.0.0/ses/gtwysrvr/cfgenv.sh
    /opt/siebel/8.1.1.0.0/ses/config/config.sh -mode enterprise
    After some steps, the Configuration Wizard prompted 'Siebel Configuration Wizard failed with error. Please see the log files for details'.

    You can try to use locate and search for: *.log
    Tips For Linux - How to find files in Linux using 'locate'

  • C028:unable to connect to siebel gateway name server

    Hi Siebel Guru,
    I am facing issue with C028:unable to connect to siebel gateway name server when i configuring a new enterprise for gateway name server.
    please help me out to sole this issue ASAP.
    Regards
    Prabhat

    HI
    I configured my gateway server with default port 2320.
    and my gateway server up and running mode.
    my port also listening.
    netstat -na | grep 2320
    tcp 0 0 0.0.0.0:2320 0.0.0.0:* LIST EN
    -bash-3.1$ list_ns
    started at Thu May 21 01:00:39 2009, pid: 5834, autostart: no
    -bash-3.1$ start_ns
    service is already running
    started at Thu May 21 01:00:39 2009, pid: 5834, autostart: no

  • Unable to connect to siebel gateway name server .

    unable to connect to siebel gateway name server .
    erro log:
    [TCPIP-client] failed to resolve hostname: siebel82 (err=852198 | Internal: gethostbyname_r ()failed with error. (%sysError))
    //1
    commonutil ValidateSiebelGateway sadmin password 192.168.0.82:2320 // return true
    commonutil ValidateSiebelGateway sadmin password siebel82:2320 // return false
    commonutil ValidateSiebelGateway sadmin password siebel82.cc:2320 // return false
    //2
    [oracle@siebel82]$ ping siebel82
    PING siebel82.cc (192.168.0.82) 56(84) bytes of data.
    64 bytes from siebel82.cc (192.168.0.82): icmp_seq=1 ttl=64 time=0.038 ms
    64 bytes from siebel82.cc (192.168.0.82): icmp_seq=2 ttl=64 time=0.050 ms
    //3
    [oracle@siebel82]$
    ping siebel82.cc
    PING siebel82.cc (192.168.0.82) 56(84) bytes of data.
    64 bytes from siebel82.cc (192.168.0.82): icmp_seq=1 ttl=64 time=0.036 ms
    64 bytes from siebel82.cc (192.168.0.82): icmp_seq=2 ttl=64 time=0.050 ms
    //4
    [oracle@siebel82]$ nslookup siebel82.cc
    Server:          192.168.0.82
    Address:     192.168.0.82#53
    Name:     siebel82.cc
    Address: 192.168.0.82
    //5
    [oracle@siebel82]$ nslookup siebel82.cc
    Server:          192.168.0.82
    Address:     192.168.0.82#53
    Name:     siebel82.cc
    Address: 192.168.0.82
    //6
    [oracle@siebel82 bin]$ uname -a
    Linux siebel82.cc 2.6.32-100.34.1.el6uek.x86_64 #1 SMP Wed May 25 17:46:45 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
    //7
    Installed Top-level Products (2):
    Siebel Enterprise Server 8.2.2.0.0
    Siebel Enterprise Server - enu 8.2.2.0.0
    Thank you for any tips.

    check the connect string in eapps.cfg

  • C028: Unable to connect to Siebel Gateway Name Server during Siebel Server

    Hi,
    I'm getting above error during Siebel Server Configuration when I run the Configuration Wizard
    C028: Unable to connect to Siebel Gateway Name
    Gateway name Server is up and running on same machine, Database Server is up and running on other machine and Application server machine can make connection to database machine through Oracle database client all Oracle net configuration entries are properly added in the Client TNSNAMES.ora file, the Siebenv.sh contain all necessary entries including ORACLE_HOME, bin path and lib32 path along with proper Oracle_sid entry and also I'm giving proper gateway name server credentials i.e of sadmin.
    Here are the logs of the gateway name server
    File Name:= NameSrvr.log
    DBCLog DBCLogError 1 000000114dc910be:0 2011-05-10 18:26:32 523 80
    GenericLog GenericError 1 000000114dc910be:0 2011-05-10 18:26:32 (secmgr.cpp (2679) err=4597538 sys=0) SBL-SEC-10018: 523 80
    GenericLog GenericError 1 000000114dc910be:0 2011-05-10 18:26:32 (secmgr.cpp (2735) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    GenericLog GenericError 1 000000114dc910be:0 2011-05-10 18:26:32 (client.cpp (309) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    SisnTcpIp SisnSockError 1 000000114dc910be:0 2011-05-10 18:26:32 530: [TCPIP-server] recv() failed for sd=-1 (err=9 | Bad file number)
    SisnTcpIp SisnSockError 1 000000114dc910be:0 2011-05-10 18:26:32 530: [TCPIP-server] send() failed for sd=-1 (err=9 | Bad file number)
    File Name:- nameserver_audit.log
    Timestamp Record Type Host Name ProcId Client Name User Name Key Name Value
    2011-05-10 17:09:16 FailedLogin Siebelmachine 958544 java SADMIN
    Kindly help me in identifying where I'm making the mistake as I've configured all necessary thing needed for Allpication Server Configuration upto best of my knowledge. Your help will be highly Appriciated.
    Regards,
    Abbasi

    Abbasi,
    This error message can be related with Doc ID 751784.1, here is the workaround suggested:
    1. Stop all Siebel Enteprise components (Gateway/Siebel Server/Web Server)
    2. Copy SIEBEL_ROOT/siebsrvr/IVSE.LIC to SIEBEL_ROOT/gtwysrvr/
    3. Restart the Siebel Enterprise components
    4. Use srvrmgr to confirm a connection to the Gateway Name Server can be made without error e.g.
    srvrmgr /g gateway1 /e enterprise1 /u sadmin /p sadmin
    If successful a message such as "Connected to 1 server(s) out of a total of 1 server(s) in the enterprise" will be displayed.
    Hope it helps.
    Wilson

  • Unable to connect to Gateway Name Server while config Siebel Server

    I installed Siebel 8.1.1.11.0 on RHEL 32-bit. I did configuration as following.
    Install 32-bit Oracle Client and config TNS.
    Install and config Gateway and Enterprise.
    Install Siebel Database.
    Use stop_ns, start_ns and list_ns to restart and ensure Gateway running.
    Run CreateSiebSrvrEnvScript to generate Env file.
    Modify /siebel/8.1.1.11.0/ses/siebsrvr/siebenv.sh. Change ODBCINI=/siebel/8.1.1.11.0/ses/gtwysrvr/sys/.odbc.ini.
    Source siebenv.sh.
    export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/home/oracle/product/11.2.0/client_1/lib
    Config Siebel Server. While enter info of Gateway, enter SADMIN as account, rhel (configed in /etc/sysconfig) as host name and port = 2320. Then it prompt "Unable to connect to the Siebel Gateway Name Server".
    Any step missing to config it?
    Thanks

    The siebenv.sh file located in the Gateway directory from a 8.1.1.11 installation doesn't have the enviromentt variable SIEBEL_UNIXUNICODE_DB, which i do have in the siebenv.sh from my 8.1.1.0 installation. Add the following line to the siebenv.sh located in the gateway directory (/siebel/8.1.1.11.0/ses/gtwysrvr in my installation):
    SIEBEL_UNIXUNICODE_DB=ORACLE; export SIEBEL_UNIXUNICODE_DB
    Be sure that this variable is set BEFORE you start the gateway and everything should work.
    PS- You also need the Oracle enviroment varibles set before you start the gateway. ORACLE_HOME should be pointing to your 32bit client.
    Cheers!

  • C028: Unable to connect to siebel gatway name server"

    Hi,
    We are using Oracle enterprise linux 6.3 version OS for siebel 8.1.1.7 siebel installation on oracle database.
    I have installed the siebel gateway name server, but while installing enterise, it is erroring out during the gateway name server authentication.
    Points ot note. checked all the below options
    1. db connectivity is working fine wt SADMIN/SADMIN user. able to conect using sqlplus
    2. able to ping the gateway port using netstat.
    3. the oracle client is a 32 bit client.
    Also there is gateway.cfg file missing from gtwysrvr/bin. but the gateway service is up and running and the process is pointing to the gateway.cfg in the bin file. .
    Please suggest.
    Thanks,
    Vinod.

    Vinod,
    Check if Doc ID 1391312.1 on support.oracle.com is helpful.
    Thanks,
    Wilson

  • Windows Deployment Services PXE Installation of Windows 10 Preview and Server vNext Technical Preview Failed

    The automated answer file associated with Windows 10 Enterprise Technical Preview x64 (9481) and the Windows Server Technical Preview x64 (9841) seem to be incompatible. No problem adding both wim files to WDS, this completes without issue.
    When trying to install both the Server vNext Technical Preview and Windows 10 Enterprise Technical Preview Via Network Installation (PXE) both encounter errors. The Server PXE Installation wont even commence after choosing the vNext Operating system installation,
    and choosing the Windows 10 operating system encounters a "answer configuration error" towards the end (maybe the generalization pass?). 
    Anyone have a work around for configuring the answer file? or maybe a more positive experience?

    We're playing around with Windows 10 TP and Server vNext also. For Windows 10 TP i got PXE based deployment running with unattend.xml from Windows 8.1. But i still did not get Server vNext deployment working. 
    I would also be happy if there's somebody out who has an idea on that topic. 

  • Publish RD Gateway and Web Access with One-Time Password (OTP) / Two-factor Authentication WITHOUT ISA/TMG server

    Hi everybody,
    I've been struggeling with this problem for a few weeks now and can't find a way to solve it.
    We have an RD farm (Server 2012) which consists of two Remote Desktop Servers with Connection Broker and Web Access.
    I've recently published a new server, containing RD Gateway and Web Access in our perimeter network.
    Now we've got restrictions that OTP/2FA must be used for the external deployment and we've decided to go for a solution from Gemalto.
    The "program" is called IDConfim and the server is called SA Server (Strong Authentication).
    Also it's important that NO ISA/TMG server is supposed to be used, the OTP/2FA is supposed to work seamless with the Web Access/Gateway.
    After hours discuss we came to a point were their NPS agent setup would be the only way to accomplish our goals.
    The setup is supposed to be like this:
    LAN:
    1 DC (2008 R2)
    RD Farm (2012)
    1 SA Server (2012)
    DMZ:
    RD Gateway/Web Access (2012)
    Were Gateway and Web Access should forward the authentications with NPS to the NPS agent on the SA server.
    When you print your AD account to authenticate you add the 6 digits of OTP which you recieve from you mobile app.
    Initially this seems to work, the Gateway forwards the request to the remote NPS server, BUT only if you write the correct AD password
    (without the OTP extension).
    If you write the correct AD password the authentication is forwarded to out SA Servern and it's beeing rejeced because the password doesn't
    contain the correct OTP extension.
    The problem comes here.
    When you write you AD password along with the OTP extension you get a Windows Security error in the eventlog (On thw Gateway server) like this:
    An account failed to log on.
    Subject:
    Security ID: NULL SID
    Account Name: -
    Account Domain: -
    Logon ID: 0x0
    Logon Type: 3
    Account For Which Logon Failed:
    Security ID: NULL SID
    Account Name: user
    Account Domain: domain
    Failure Information:
    Failure Reason: Unknown username or password.
    Status: 0xc000006d
    Sub Status: 0x0
    Process Information:
    Caller Process ID: 0x0
    Caller Process Name: -
    Network Information:
    Workstation Name: server
    Source Network Address: 192.168.x.x
    Source Port: 63003
    Detailed Authentication Information:
    Logon Process: NtLmSsp
    Authentication Package: NTLM
    Transited Services: -
    Package Name (NTLM only): -
    Key Length: 0
    This event is generated when a logon request fails. It is generated on the computer where access was attempted.
    The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
    The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
    The Process Information fields indicate which account and process on the system requested the logon.
    The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
    The authentication information fields provide detailed information about this specific logon request.
    - Transited services indicate which intermediate services have participated in this logon request.
    - Package name indicates which sub-protocol was used among the NTLM protocols.
    - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
    What i can see it's a NTLM error, but hey?! aren't we supposed to forward all authentication handeling to the remote NPS server?
    The problem is that no matter what i try the above problem stays there.
    Is it not possible to just forward ALL authentication handeling to a remote server?
    The only solution I've found to get it working someday in the future is this:
    "Remote Desktop Pluggable Authentication and Authorization", which is supposed to be introduced in 2012 R2.
    Also this link describes it:
    http://archive.msdn.microsoft.com/Release/ProjectReleases.aspx?ProjectName=rdsdev&ReleaseId=3745
    Please, bring me some answers before my head explodes! :)
    PS, long question = maybe some errors, ask me if something is unclear.

    Hi,
    Based on our experience, if the NTLM error occurs, please check the password.
    Regards,
    Mike
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Setting up gateway and firewall in OS X Server 10.3?

    Hi all,
    I have a G4 tower with two working ethernet cards in it that I would like to configure as a gateway and firewall. It has OS X Server 10.3 on it. I have easily found the firewall configuration in the Server Admin intrerface, but I can find nothing about configuring the server to act as a gateway. The only information I have found that is pertinent is related to the Gateway Setup Assistant that comes with OS X Server 10.4, which doesn't exaclty help me. Does anyone have any documentation on configuring OS X Server 10.3 to be a gateway? Thanks.

    Actually, I may have marked this as answered too quickly...
    So I followed the guide at the back of the getting started manual, and set everything up as follows:
    - PCI ethernet card is set up as the connection to the outside world. It is plugged into a switch which connects to a wall jack. In Network under System Preferences, it is set up as the first internet conection to try. It has a static IP address, and is set up to use the organization's DNS servers. It is NOT plugged into the upstream port, but is instead in port #9. The light on the router is on.
    - Built-in wireless is set up to be the internal connection. It is plugged into the upstream slot on anouther switch. It has a static IP address, and is set up to use the organization's DNS servers. The light on the router is on, so it appears there is a connection.
    - A different computer is plugged into the second switch, which a static IP address and to use the organization's DNS servers.
    So basically, unlike in the scenario in the manual, I am not using the OS X Server for DNS, DHCP or NAT services. That should, if anything, simplify it.
    The firewall service is started, and is set to allow all traffic in and out, no problems. Nice and simple to start.
    The server has an okay connection to the outside world via the PCI ethernet card. I can ping other machines and load web pages. I cannot, however, access the machine connected to the router which is connected to the built-in ethernet. Likewise, that machine has no access to either the OS X Server or the outsideworld.
    How does OS X Server decide which ethernet card is to be connected to the outside world, and which is for the internal firewall? Is the confusion possible because I'm connected to two routers?

Maybe you are looking for

  • How to Insert Multiple Icons in a Canvas?

    Hi All I am new to MIDlets so I need some initial help related to UI generation in MIDlets. I have to Insert multiple Icons in a canvas. These Icon should behave like button i.e. all Icon must have key-pressed event separately(i.e. when any particula

  • ATV2 CANNOT REMEMBER WIFI !!! WIFI KEEP DROPPING

    I am using the Dlink 655 Router and when connected for serval minutes the wifi dropped(The apple TV is not connected to the Internet) Then it wont reconnect it again!!! Sometimes when the ATV2 Standby and I wake up by remote, the Wifi wont automatica

  • Forgot username and password for data

    I inherited an iPad 2 from my mom, and she is no longer reachable.  I'm trying to change the data plan into my own name and CC, but I can't log in to change it.  Is there anyway to completely reset the iPad 2 data plan so that I can set up the data p

  • How can you tell your iPod t generation

    I Need to know how to tell which generation my iPod touch is. It only says 8GB

  • IMAQ ImageToArr​ay.vi in installati​on of VDM2011

    Hi, I am trying to use a firewire camera (Dragonfly2 DR2), with a custom VI that uses sub vi's like "IMAQ ImageToArray.vi" and "IMAQ1394Snap.vi". I installed VDM2011, thinking this would contain the vi's I'm looking for. This proved not to be the cas