Re-installation procedures for: Microsoft Visual C Runtime launching Editor and/ or APSE-10
What procedures are involved in accomplishing the re-installation of the file(s) and App?
See if steps mentioned here Microsoft Visual C++ Runtime Error launching Editor | Windows are helpful?
~Surendra
Similar Messages
-
Need fix for Microsoft Visual C++ Runtime Library Runtime Error
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:C:/Program/Serato/ScratchLIVE/ScratchLIVE.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
I'm using 32 bit version of Vista and an external drive.
I have also posted on the software manufacturer sight as well
http://www.scratchlive.net/forum/discussion/?discussion_id=103045#1320814
Any help anyone can give me is appreciatedHi,
Mostly, this kinds of error can be caused by two factors:
1.Runtime components of Visual C++ Libraries are missing.
2.Software problem.
If the issue is caused by #1, you can reinstall the Runtime components of Visual C++ Libraries to resolve the problem.
Microsoft Visual C++ 2008 Redistributable Package (x86)
http://www.microsoft.com/downloads/details.aspx?familyid=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en
If the issue still persists after installing above package, the issue should be a software problem. I suggest you take a clean boot check whether it is a software conflict issue. If not, it is still recommended to address the problem with manufacturer support. Thank you for your understanding.
For your convenience:
Clean Boot
=============================
1. Click Start, type "MSCONFIG" (without the quotations) in the Search Bar and Press "Enter" to start the System Configuration Utility.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
4. Restart the computer and test the issue.
Note: Clean Boot is a troubleshooting step. If some programs have been disabled, we can re-enable them later. If you see the System Configuration Utility, check the box of "Don't show this message" and then click "OK".
Please monitor the system in the Clean Boot environment. If the problem does not occur, it indicates that the problem is related to one application or service we have disabled. You may use the MSCONFIG tool again to re-enable the disabled item one by one to find out the culprit.
Hope it helps.
-
Need fix for microsoft visual C++ runtime library error
everytime i want to open windows explorer, there will be a pop up saying"this application has requested runtime to terminate it in an unusual way. please contact the application's support team for more information."
then when i press OK, it will have another pop up saying to windows explorer has stopped working. then i have to choose to restart the program or check online for a solution and restart the program.
either way, the problem is still there.
Can someone please give me a solution.Seems like you are not alone with this problem. Here is what I found in the very first Google run on top of search:
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/windows-explorer-crashes-continually-on-windows-7/70c333ba-0cd3-4308-96ce-e81931d123e3
https://social.technet.microsoft.com/Forums/windows/en-US/d6d0c748-b4be-4a0d-87aa-3d5306fa4e86/this-application-has-requested-the-runtime-to-terminate-it-in-an-unusual-way-please-contact-the?forum=w7itprogeneral
http://www.howtogeek.com/forum/topic/this-application-has-requested-the-runtime-to-terminate-it-in-an-unusual-way
HTH
Milos -
Runtime Error - Microsoft Visual C++ Runtime Library
Each time I login to my Windows Server 2012 machine, after few minutes I keep getting the Runtime Error, even if I close the dialog box, it keeps repeating for 3-4 times.
Below is the error description
Runtime Error!
Program: C:\Windows\system32\wbem\wmiprvse.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
Can somebody help on this?
Thanks,
VishwanathHi Vishwanath,
Based on my research, this issue could be caused by missing or corrupt system files, please try to run the "sfc /scannow" without the quotes in cmd to fix it.
If this can not work, please also check this forum to fix:
Need fix for Microsoft Visual C++ Runtime Library Runtime
Error
Best Regards,
Anna -
Runtime error is coming after a few minutes of CMS software turned on. But software is running OK.
why it is coming and how can we resolve this issue?
Thank you in advance
Regards
arun avHi,
Mostly, this kinds of error can be caused by two factors:
Runtime components of Visual C++ Libraries are missing.
Offending application.
You can reinstall the Runtime components of Visual C++ Libraries to resolve the problem if it is caused by missing Libraries.
For more information and solution about Microsoft Visual C++ Runtime Library Runtime Error, refer to answer of this thread.
https://social.technet.microsoft.com/Forums/windows/en-US/b5d10db8-2980-4fe6-81e0-f232eab4037a/need-fix-for-microsoft-visual-c-runtime-library-runtime-error?forum=itprovistaapps
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
During iTunes installation, when it comes to installation phase "Registering iTunes automation server"... I am getting following error message:
"Microsoft visual C++ runtime Library"...
"Runtime Error! Program: C:\program files (x86)\iTunes\iTunes.exe"
"R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."
My system is Windows 7 Enterprise - Service Pack1Check the user tip below.
https://discussions.apple.com/docs/DOC-6562 -
Microsoft Visual C++ runtime error when building installer
I'm trying to build an installer for a very simple VI I've created in 8.2. Before the build is complete I get a Microsoft Visual C++ runtime error message pointing towards the labview.exe file. I've already tried re-installing LabVIEW and deleting older versions of the LabVIEW Runtime engines with no luck. I recently upgraded my system from LabVIEW 6.1 and I'm using Windows XP. Any suggestions?
Thanks.
LabVIEW 2012 - Windows 7
CLADI included waveform storage, runtime engine 8.2, ni-visa-runtime and ni-serial3.1. I tried to create a setup.exe by installer on an other pc. But it's completely the same behavior afterwards. I attached the error message. This message appears after I choose the path and continue the setup. It's the question which file is meaning.
I tried to create a setup.exe by installer without any additional.
The strange thing is it was unsuccessful with following message. Maybe this will be helpful to find the problem.
CDK_Item_OnDoProperties.vi.ProxyCaller >> CDK_Item_OnDoProperties.vi >> CDK_InstallerConfiguration_Editor.vi >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_BuildDevPart.vi >> NI_MDF.lvlib:MDFBuildDevPart_Open.vi
Attachments:
missing file message.JPG 15 KB -
photoshop elements 10 won't start. Message is. 'Runtime error. Application has requested the runtime to terminate in an unusual way. Please contact support team for more information' 'microsoft Visual C Runtime Library. How do I fix this or can I just uninstal and then re-instal (without losing my spare licence that I want to use elsewhere) It is a PC not a Mac
See if anything here helps:
Troubleshoot C++ runtime errors | Adobe products | Windows -
Hello,
I just tried to install the new file CRforVS_13_0_9.exe on a Windows 7 Ultimate machine.
I have Visual Studio 2013 and wanted Crystal Reports to be fully integrated with it.
By the way, I had already uninstalled CRforVS_13_0_8.exe before I attempted the installation of CRforVS_13_0_9.exe.
However, the installation failed with the following error message...
"The installation failed prematurely." The error dialog box with a full error message is attached.
It may be significant to note that even after what looks like a failed installation, that "SAP Crystal Reports, version for Microsoft Visual Studio" (ver. 13.0.9.1312) does show up in the Programs and Features Control Panel).
Any help/advice would be greatly appreciated. Please advise.
Tom DaveyThis used to be quite common on WIN XP and Vista and it was an MS issue. Googling I found the following that may help:
Fast and easy Windows Error Code 2753 resolution
Error 2753 Preventing Uninstall/Reinstall - Microsoft Community
Windows Installer Error Messages (Windows)
For now, this is the only report of the error with SP 9, so it will be good to check if the above helps.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
Microsoft Visual C++ Runtime Library Runtime Error! Program: C:\Program Files (x86)\iTunes\iTunes.exe R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program Files (x86)...
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
OKClick here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't normally affect its library, but that should be backed up anyway.
(99146) -
ITunes is blocked for a Microsoft Visual C Runtime LIbrary error R6034
Updating the new version of iTunes it has been blocked from a Microsoft Visual C++ Runtime Library Runtime error! Program C:\Program Files (x86)\iTunes\iTunes Helper.exe.
I've cancelled the previous version of iTunes and laod the new one but the message blocks the Upload and iTunes doesn't work
Few day ago I received also some warnings about the iTunes Library that was full
Spomeone knows how to solve the problem?
Thanks@RAcuna1
It's better to consult Apple support
http://www.apple.com/in/support/
The problem maybe due to corrupt package from their download.
Regards,
Barry Wang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Labview 8.6 Microsoft Visual C++ Runtime error while installing
I am installing Labview 8.6 on my laptop which is having Windows Vista Home premium edition.
When the installation begins an error occurs (after the acceptance of licence step in the installation procedure) with the title on the error window "Microsoft Visual C ++ Runtime Library " and displays the program set up path with these statements " This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
I am unable to install it on my laptop. Can anybody please help me.
Thank youhi
broadly the error could be because of two reasons:
1. Runtime Engine exe file is corrupt in the CD you are using to install LabVIEW.
Solution: Download LabVIEW Runtime Engine 8.6 from http://joule.ni.com/nidu/cds/view/p/id/1101/lang/en
2. There's some problem with the windows installation in your PC.
Solution: you know reinstall windows
But before trying to reinstall, make sure you installed the msi.dll using "Regsvr32 (system folder path)\msi.dll" . I'm sure you did.
thanx
Ravi -
Update for Microsoft Visual C++ 2012 Update on Windows 7
I received the Update for Microsoft Visual C++ 2012 Update 4 Redistributable Package (KB3032622). The installation failed. Here are the details
Installation date: 2/10/2015 8:35 PM
Installation status: Failed
Error details: Code FF
Update type: Important
If you use Visual Studio 2012 RTM product to build C++ apps and use certain functionality from the C++ Standard Template Library in your projects, then you might run into a runtime failure similar to the following:
"The procedure entry point_ crtCreateSymbolicLinkW could not be located in the dynamic link library MSVCR110.dll"
This was caused due to certain missing function exports in the runtime DLL msvcr110.dll that shipped with VS2012 RTM. This problem was eventually fixed in Visual Studio 2012 Update 4. This article
ensures that the correct runtime DLLs are provided to all users who had previously installed the faulty DLLs from Visual Studio 2012 RTM
More information:
http://go.microsoft.com/fwlink/?LinkID=525548
Help and Support:
http://support.microsoft.com
I tried to run the update troubleshooter, but it did not help. I tried Microsoft Fixit50123, but that did not solve the problem either.
Little Old ProfHi Little Old Prof,
I’ve noticed that similar case occurs on this 2/10/2015 update (KB3032622) in some environments. But still a small number.
And we suggest you run the Windows Update Troubleshooter first and check if there is something need to fix.
After that please recheck if this update still in your list of updates to be applied.
Open the Windows Update troubleshooter
http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-8
And again, we would appreciate it if you could send us right cbs log file for our reference. Turns out the CBS log you sent to us was ending at 19:01 2/10/2015 and your error occurred at 20:35 2/10/2015.
Regards
D. Wu -
HOW CAN I FIX Microsoft Visual c runtime library R6034
HOW CAN I FIX Microsoft Visual c runtime library R6034
Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Getting Microsoft Visual C++ Runtime Library error while launching Dashboard 4.0
Hi All,
I just installed BO Dashboard 4.0 on my Windows system successfully and when I tried to launch Dashboard icon (which is at desktop), it gave me error message :"Microsoft Visual C++ Runtime Library: RunTime Error! Program :C:\....This application has requested the Runtime to terminate it in an unusual way. please contact the application's support team for more information."Hi Renu,
Please see Note 1676695 - Assertion Failed Exception for shared_ptr.hpp when installing .NET runtimes for Business Objects 4.0
This can happen if you do not have the VS 2005 C++ Runtimes installed.
Download the VS 2005 C++ runtimes (http://www.microsoft.com/download/en/details.aspx?id=3387) and install, then run the .NET runtimes installer again.
Login with administrator in the system and perform the below activity.
Re Install the Microsoft Visual Studio
Check the latest patch available from the SAP Market Place www.service.sap.com/swdc
Re Install the Dashboards.
Or below thread
BO Dashboard 4.0 SP02 or SP04(W/ FP03)
Thanks,
Daya
Maybe you are looking for
-
IPod not recognized in iTunes or MAC
Sometimes I will get the file icon with an exclamation point and sometimes my iPod will just freeze. It will not show up on my desktop or in iTunes. I have tried to reset my iPod but my computer, once connected to my iPod w/ a USB, will not even reco
-
I cannot download PDF documents. I get an error message; i.e., The document "1-15_HowtoSellWithoutSalesy.pdf" could not be exported as "1-15_HowtoSellWithoutSalesy.pdf". This is a recent event since I installed the newer version of Adobe. Any thought
-
How do I get the "Show Page Source" feature back?
-
Question about random signal loss
I have the latest 802.11n AirPort Extreme Simul. Dual Band. I replaced my older Extreme with this one because it would randomly just kick me off of whatever I was doing, be it playing Xbox or using the net on my iMac or MBP. The light would stay gree
-
I have the following in an execute script. It creates an XML quite nicely. However, I need it to retrieve the data for comparison versus creating an XML. Is there an easy way to convert what I have so this can be accomplished? I need to compare the c