Re installed leopard instead of snow leopard!

Help! I needed to change my mac book password and re-installed the OLD OSX dvd instead of snow leopard what can i do as I have no view of all my files etc...!!

Ally4749,
when you’d reïnstalled Leopard rather than changing your password, did you wipe clean your internal disk in that process? Try opening a Terminal window, then run the following command there:
ls -l /Users
Please include in your reply the full output from that command.

Similar Messages

Re-installing Leopard after installing Snow Leopard?

I recently installed Snow Leopard, but want to re-install Leopard instead without losing all of my current data (Applications, folders...aka everything) - is this possible?

First, note that above I said: "final step is to do an erase and install of Sno." Where I said Sno, I meant Leo.
You can do your reinstall of Leo more simply than I mentioned before. What I was am trying to do is to give you the best chance of moving back to Leo successfully without having to reinstall your apps. What I was going to tell you about is complex.
To avoid the complexity, here is what I recommend. Make the Sno clone I mentioned before for safety and to have easy access to your data for future drag and drop. Now, just do an erase and install of Leo on your internal drive; reinstall your apps by hand; and drag and drop you data into the appropriate folders on your new install.
If you don't want to reinstall your apps by hand, then I'd recommend that you go the more complex route I started describing. I am hoping that you don't have so many apps that you won't choose the more complex procedure. I apologize for the confusion I probably have created. Just let me know which way you would prefer to proceed.

Mountain Lion won't install on 10.7.4. Suggestion from Apple is to completely erase harddisk and install Leopard Snow Leopard Mountain Lion. Is there no other way to install Mountain Lion

Mountain Lion won't install on 10.7.4. Suggestion from Apple is to completely erase the harddisk and install Leopard > Snow Leopard > Mountain Lion.
Is there no other way to install Mountain Lion?

I tried and failed for several hours to install Mountain Lion, and was repeatedly getting the "Recovery System" cannot be created error. I tried all the tricks: resizing the drive partition, booting from an external boot drive, all to no avail. After reading other users struggling with the same issue, I had determined it to be a boot camp drive error. However, I didn't want to have to erase and begin anew when I came upon a possible solution. I had long ago renamed my boot camp drive with a "." (".windows" for me) in order to avoid having the partition show up on my desktop. So, I boot into windows and renamed the c: drive without the "." ("windows"), and reboot into os x. The install then went off without a hitch. I hope this will be helpful for others struggling with this issue that may have renamed their boot camp drives in a similar manner.

Install Leopard with boot camp on snow leopard.

I upgraded to Snow Leopard and have a piece of line 6 hardware that is not compatible. Updated drivers are taking forever to come out and I need to use this hardware. I'm wondering if it would be possible to use boot camp to install leopard from the installation disk included with my macbook so that I can boot to it to use the line 6 device.
Any help would be appreciated.

The easiest way is to use Disk Utility in the Utilities folder to create a 2 partition set up. Disk Utility will be able to do this without erasing your existing information.
- Select your volume the one with the disk size at the top
- Click on Partition
- Change the Volume Scheme to 2 partitions
- Answer any messages and such
I am sorry since I have mine partitioned with BootCamp for my Windows 7 partition, I am unable to describe all of the steps as BootCamp locks me out of performing the rest of the steps.

When I am re-installing the Mac OSX snow leopard onto an older Mac I run into the window that says select the disk where you want to install Mac OSX but nothing is there to select

I am trying to re-install the Mac OSX snow leopard onto an older I mac with a new hard drive. I run into the "select the disk "where you want to install Mac OSX but there is nothing in the window to select. Any advice?

After you install a new hard drive, you need to boot to another drive to initialize it to MAC OS Extended (journaled) format and create the partition(s) on the drive. You do this using Disk Utility. Otherwise, the mac operating install process doesn't see a formatted disk to install to.

Install Leopard on an External Drive on a Snow Leopard Mac Book Pro

Hi
I have a MBP 17/CTO 2.66GHz i7, which came installed with Snow Leopard.
I've used boot camp to install Windows 7.
I've attempted to install Leopard 10.5.4 on an external drive.
The steps I've taken:
1 - Connected my WD Passport on the Firewire Port
2 - Partitioned the drive. The first partition is 100GB, Mac OS/X Extended (journal) and I've selected the GUID Partition Scheme
3 - Inserted the Mac OS/X Leopard DVD, and followed the instructions to restart
4 - On restart I have three options. Mac OS, Windows and Install Mac OS\X
5 - I select Install Mac OS\X.
6 - The disc spins for a few moments and then the laptop freezes
Beware of the following issue:
1 - On restart more often than not, the DISC will spin and then the laptop will freeze.
2 - To overcome this, restarting pressing the ALT (option) Key.
3 - You should see your boot options. If you do not see "Install Mac OS\X", then eject and reinsert the disc.
The question maybe why would I want to have an Leopard Installation when I have Snow Leopard. The software I develop has thrown up a number of differences between Leopard and Snow Leopard, hence I need both OS's to support my software.
I mentioned this to the Apple Store before I purchased my machine. They put me through to a senior technician at Apple Care, who told me it would be possible to have the set up I am after; and to contact Apple Care if I ran into any difficulties.
After I received my laptop and ran into the problems I described above I contacted Apple Care, only to be told by a senior technician that it should be possible to install Leopard on an external drive, but Apple Care cannot provide any support or assistance.
I really do like the laptop and would much rather not return the laptop; but I really do need the setup described.
Anyway I have tried a number of different approaches:
1 - Having no partitions (so just the single partition)
2 - Trying all three Partition Schemes:
- GUILD Partition Table
- Apple Partition Map
- Master Boot Record
All resulting in the same problem.
I can confirm the external drive does appear as bootable in disc info.
My guess is one of the following is preventing the install:
1 - It is simply not possible to install an earlier version of Mac OS\X than 10.6 on the laptop I have, even if I tried to install on an external drive. This restriction is built into some hardware confirguration. So even if I wiped the internal hard drive or added a new partition to the internal hard drive, I would not be able to install 10.5.4. I say this may be a reason as the second technician told me the CPU has built into it a process which prevents installing older versions of Mac OS/X, but that it should NOT restrict installation on an external harddrive.
2 - When trying to install Mac OS/X, a search is carried out for an external drive which has the correct format. For some reason it may be that this search is not finding my external drive?
I'm a little stuck here and quite disapointed that the support promised by Apple Care for assistance in setting this up, is now not forth coming.
Any help or suggestions would be appreciated, as ideally I would prefer to keep and not return the laptop, it's a beautiful piece of machinery.
Cheers
Parmy

The mystery continues...
I have an older MBP (2.33 GHz Intel Core Duo) which came installed with Tiger. I can confirm I purchased a genuine copy of Leopard (10.5.4) from the Apple Store and it’s not an OEM version. I installed 10.5.4 without a hitch on my old MBP internal drive. It is the only OS installed on my old MBP.
Using my older MBP (which through software updates is now running 10.5.7), I managed to install 10.5.4 onto my external HD (WD My Passport Studio – 640GB FireWire 800).
However; on the final restart, the screen remained grey and 10.5.4 did not boot from the external drive.
I restarted the machine holding down the ALT (option) key, and only two options appeared, Macintosh HD and the Install DVD. I selected the Macintosh HD and opened System Preferences.
In System Preferences --> Startup Disk, I discovered the partition on my external HD which contains 10.5.4. I selected this partition and selected restart.
On restart my MBP displayed a grey screen, and the blue light on my hard drive flashed slowly. I left this for an hour, however; the OS did not start and the screen remained grey.
I then plugged my external HD into my new MBP which I started holding down the ALT key.
To my surprise I found 3 boot options (Macintosh HD, Windows and Leopard). Leopard being the partition on my external drive, which now has 10.5.4 installed.
I selected Leopard, but sadly after 30 minutes, the OS failed to boot.
Although this deviates slightly from this post, I fail to understand the problem here:
1 – Why can’t I boot 10.5.4 on an external drive, from my old MBP? Surely this is not because my old MBP is now running 10.5.7?
2 – Why can I see 10.5.4 as a boot option on my new MBP but not on my old MBP when I start the MBP holding down the ALT key?
I doubt there is a problem with my external drive, as it seems to read, write, etc... in all normal cases.
Whilst it definitely appears that I won’t be able to boot 10.5.4 on an external drive from my new MBP, I should be able to at least boot it from my old MBP, which would give me the option of installing Snow Leopard and Windows on the internal drive of my old MBP.
Apologies for keeping this post going, but I hope by getting to the bottom of this, it will help other Mac users as well.
I’ve run out of ideas of things to try, so I will give Apple Care another call in the morning, and will report back.
Any suggestions of other things I can try?
Cheers

I have tiger (10.4.11), and I would like to upgrade to snow leopard(10.6). Do I need to install leopard(10.5) first?

Do i need to install leopard first? I was planning to but snow leopard off of amazon.

The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list.
If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0

I can't install Mac OS X Snow Leopard on my Mac mini!

Hi,
I have a Mac mini 2007, with OS X 10.5.8
I want to install Mac OS X Snow Leopard, but i can't. I erased the hard drive with the installation disc of leopard and then i tried boot snow leopard. After a few seconds it said: "You can't install on this computer. What can i do?
My Mac mini's details:
Model Name:          Mac mini
Model Identifier:          Macmini2,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          1.83 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          2 MB
Memory:          1 GB
Bus Speed:          667 MHz
Boot ROM Version:          MM21.009A.B00
SMC Version (system):          1.19f2
Please help!

Where did you obtain the Snow Leopard DVD? If it is aDVD from another computer, it will not work. You will need the retail version of the DVD as shown below.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

PLEASE HELP ME - I am not very tech savy and I thought I hadn't installed Mac OS X Snow leopard .After I installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me ;-(

I am not very tech savy & I thought I hadn't installed Mac OS X Snow leopard .After I installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me

krystiefrommorayfield wrote:
I am not very tech savy & I thought I hadn't installed Mac OS X Snow leopard .After I
installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me
You connect your iPhone to iTunes through the Sync Process...
See Here
Syncing with iTunes
From Here
http://www.apple.com/support/iphone/syncing/
http://www.apple.com/support/iphone/

Installing both Lion and Snow Leopard on my Macbook Air?

Hey guys please help me out here. I upgraded to Mac OS X Lion the past week and while happy with the overall update, I have 1 big issue. I have a few PowerPC exclusive apps and since Lion dropped the PowerPC support, I am stranded with non working apps. So I need to create a partition and install Snow Leopard on my Mac.
So a couple of questions....
1) Do I need to install Leopard first and then Snow Leopard or can I directly install Snow Leopard on my Machine? I had bought Snow Leopard for 30$ and I am pretty sure at that time it asked for Leopard OS. I just want to run the apps, so if I have to go through the long route, then I'd prefer staying on Leopard.
2) How much space should I allocate to the partition? The App which I want to run just takes about 1 GB of HDD space, so I am guessing 10GB will be enough for the thing or should I allocate more cause I don't wanna starve the mac from any virtual memory issue. The main reason I am asking is cause I have the 1st gen Air which only has a 80GB Drive and I really don't have much to spare, so please suggest accordingly.
Please help me out here. And no there is no Intel Version of the App as it's been discontinued.

Thanks for replying. I don't understand the last point. Why would I have to reinstall Lion back since I just want to use 2 partitions with 2 OS. Woudn't it give me an option at Booting if I keep CMD key pressed to boot from 2 drives like it did with Windows bootcamp partition?
Quiet frankly, I just need to install the application for a week and then I plan to delete the entire partition, so I won't be extensively using it, so I guess allocating around 15GB would be sufficient. But this whole installing Lion back thing would be really annoying since I have already installed quiet a few apps and even my iPhone is now syncd with Lion... So don't want to go through the entire procedure of relocating my music and stuff again.

Need help removing Snow Leopard and Installing Leopard

Snow Leopard was a waste of time and money. Time I could have used for much more productive work.
How can I remove snow leopard and reinstall leopard. I have the installation disc for Leopard. Can I simply install it over the top of snow leopard?
That would solve my problem for one machine (the iMac) but how do I go back to leopard if I don't have the disk? I suppose there is dmg somewhere but I haven't looked so I apologize in advance if the answer is obvious.

Insert leopard install disk-select install.
It will wipe the drive and install Leopard-all data will be gone.
You must have a legitimate, legal copy of leopard.
If you backed up the leopard dvd, you would have to burn it or figure a way to do a network install.

How to install leopard from a DMG file instead of DVD

How to install leopard from a DMG file instead of DVD, When i open this file, click restart, NOTHING happened!!!!!!

Use Disk Utility to restore the DMG to a blank partition, then use the Startup Disk preferences pane to reboot from that partition. Why not just install from the DVD, though?

How can I format an HD with System 10.4 and install Leopard Snow?

How can I format an HD with System 10.4 and install Leopard Snow?

You need to partion the hard drive using Disk Utility. On one partition install 10.4. On the other 10.6. As a note I trust you are doing this on a MBP and not a PPC Mac because 10.6 won't install.

How can i install mac os x snow leopard on Lion?

You cannot. Either you erase the drive on which you installed Lion then reinstall Snow Leopard or you create another partition on the drive and install Snow Leopard on that partition so you can dual boot.
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

How can I install Mac OS X Snow Leopard on Mac OS X Tiger?

Hello. Can someone tell me how I can install Mac OS X Snow Leopard on Mac OS X Tiger? I have the disk, but when I open the installer, I get a message saying that Snow Leopard could not be installed on my computer and it could only be installed on a Intel-Based Mac. This is a PowerPC Mac, so that makes sense.
So, I'm trying to ask how to make my Mac an Intel-Based Mac so I could install Snow Leopard. Or if I can't do that, I need to know how to install Snow Leopard some other way. Please help.

Just an FYI, the Mac App Store was introduced with Mac OS X 10.6.6. However the rest of what you say is accurate.
10.6.8 is required if you want to upgrade certain Macs beyond 10.7.5 without having to reformat the drive you are installing the operating system on and without having to install some version of 10.7 first.
One can actually install 10.7 or later if you maintain an original copy of the full installer of the operating system in question for your personal use without having to have the prerequisite operating system installed, if the hardware supported it. But that's a discussion for another forum.
For HFTaylor,
Consider buying a used or refurbished Mac with an Intel CPU depending on your needs. Read this tip about the migration of data from PowerPC to Intel before proceeding:
https://discussions.apple.com/docs/DOC-2295
and see this tip about used and refurbished Macs*:
http://www.macmaps.com/usedrefurbished.html
* Links to my pages may give me compensation.

Re installed leopard instead of snow leopard!

Similar Messages

Maybe you are looking for