Re-installing an application does not work

I want to re-install an application to an individual machine by going to the machine and delete the registry key at
SOFTWARE\Microsoft\Windows\CurrentVersion\Group Policy\AppMgmt\REGISTRY ID. Then I reboot the machine. After the machine comes back online, I still do not see the application to be installed although on event viewers it says the installation begins
and then the installation ends and also I do see the registry id (to be assoicated to the installation) is put back at SOFTWARE\Microsoft\Windows\CurrentVersion\Group
Policy\AppMgmt\registry id. I am confused. Can someone give some clue where I can look into this issue?
Thank you very much!!!!!

Hi,
Based on your description, we utilized group policy to install an application for a machine. However, we couldn't see the application even the Event Viewer says that it did install. If I misunderstand you, please don't hesitate to let us know.
Before going further, we need to make sure that the application was assigned to the machine. Regarding how to assign applications to computers via group policy, the following article can be referred to for double check.
How to use Group Policy to remotely install software in Windows Server 2008 and in Windows Server 2003
http://support.microsoft.com/kb/816102/en-us
If the issue persists, please run command gpresult/h c:\gpreport.html
with admin privilege to collect group policy result to check the issue.
Best regards,
Frank Shen

Similar Messages

Application does not work properly when I press a CommanButton

Hi all, I am having a problem with weblogic 10.3.5.
It turns out that an application built with JDeveloper 11.1.5, I test it, and everything goes well in the JDeveloper integrated Weblogic.
But when deploy in a standalone weblogic 10.3.5 server, the application does not work properly when I press a CommanButton to go to another page search (the property "action" is set correctly) , but nothing happens, stays in the same home page. Similarly when a commanButton link to run a task-flow, It do not work , however in the JDeveloper integrated Weblogic it runs correctly.
How I can solve these problems?
Thanks.

Thanks Frank for help us, but when I writing this comment we are doing at home. So, we going to test the page in a stand alone weblogic server 10.3.5. We wrote the URL as :
" http://<our ip>:7001/myApp/faces/index.jspx "
this application contains a report desing and compiled with iReport 4.5.1 ( last version in the moment ), we can see the report when I press a commanButton without any problem.
But now, we need try your suggestions in the office, and give you more information about it . Thanks for the moment.
In the Afternoon we gonna give you more information about it .

HT201412 my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

Here you go:
http://support.apple.com/kb/ts1559

Application does not work on firefox 3.5

If the application is not working in mozilla firefox 3.5 then we are not able to test it in any other browser through this tool.
What should be the fix for this issue

Hi Shilpa,
Can you please provide more details about your configuration and the symptoms of what is not working for you?
What OS are you using?
What version of Flash Player do you have installed? (You can find out here: http://kb2.adobe.com/cps/155/tn_15507.html )
Are you using Firebug and the BrowserLab for Firebug add-on, or are you just using BrowserLab standalone?
Does BrowserLab work in any other browser for you such as IE or Safari?
What are the exact steps you are taking and what do you see that you say BrowserLab is not working for you?
Mark

Install acrobatx mavericks does not work

after a clean install of mavericks, the installation of acrobat x from cs6 does not work. Indesign, photoshop and Illustrater where installed.
The error Code:
Exit Code: 6 Please see specific errors below for troubleshooting. For example, ERROR: DW006 ... - 0 fatal error(s), 4 error(s) Payload: Acrobat Professional 10.0.0.0 {AC76BA86-1033-F400-7760-000000000005}ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer Adobe Acrobat X Pro Installer.pkg failed with exit code: 1 Payload: Acrobat X Pro 10.0.0.0 {E1C48031-9366-427F-AC04-535CEDAAD995} ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer AcrobatUpd1011.pkg failed with exit code: 1
can someone help my?

I was tryin the things on this Lnk, they did not help.
I did an deinstalation of the creative suit cs6.
When reinstalling again, it did not install acrobat x.
The Log file was pointing to a P7 file, which could not be created.
The last lines of the log file:
1/31/2014 17:00:00.298 [INFO] Deployment.ProgressCommand Received Exit message from DE
1/31/2014 17:00:00.309 [INFO] ProvisioningNativeAppletBase Setting EULA for locale - de_DE
1/31/2014 17:00:00.314 [INFO] Deployment.DeploymentFinishCommand Sidecar file /Users/werner/Library/Application Support/Adobe/TrialSettings-Creative_Suite_6_Design_Standard.xml does not exist
1/31/2014 17:00:00.315 [WARN] Deployment.DeploymentFinishCommand Could not process sidecar file
1/31/2014 17:00:00.315 [INFO] Deployment.DeploymentFinishCommand Activation call was not made. DEExitCode:6 ModeIsTrial:false SIFAvailable:true RegisterLater:true UserProfile:true SupressActivation:false
It seems to be a problem of activation, but for the rest of the creative suite (ps, id, il) everything was ok.
any Idea, which can help me? Thanks

BLOB download from report region in translated application does not work

We created an application (APEX 3.1.2) with a base language dutch (300) and a translated application en-uk (3001). The problem is that in the translated application downloading BLOB's from a report region does not work and results in an error (page cannot be found).
The query source for the region is:
select naam
, dbms_lob.getlength(bestand)
, mimetype
from bos_documentatie
The column 'dbms_lob.getlength(filename)' is defined as a 'BLOB Download Format Mask' with the following setting:
DOWNLOAD:BOS_DOCUMENTATIE:BESTAND:NAAM::MIMETYPE:FILENAME:::attachment:Open
The URL's to the BLOB documents are different between the dutch and en-uk application:
dutch:
http://nldvnr01ux002:7792/pls/xvapexd/apex_util.get_blob?s=4260101889649158&a=300&c=12455124581749125&p=1001&k1=Application Multi Language.doc&k2=&ck=A24A5EA6903C5A9603B86D30F128F4DE&rt=CR
en-uk:
http://nldvnr01ux002:7792/pls/xvapexd/apex_util.get_blob?s=4260101889649158&a=300&c=12455124581749125.3001&p=1001&k1=Application Multi Language.doc&k2=&ck=7FF0C64FDD48A4D7A6892CFB2B6BCA57&rt=CR
As you can see the c parameter for the en-uk version has a '.3001' at the end, the internal ID of the translated application. I don't know if this can be the cause of the problem?

Hi Peter,
Thanks for the suggestion. However we have a lot of APEX applications build in that same APEX version (one development database) and upgrading now to a higher APEX version would mean we would have to re-test all our applications and upgrade all our test and production environments, just for this bug. And, maybe the higher APEX version may not solve our problem.
Thanks and regards,
Patrick

Start-mdbs-with-application does not work

Hi,
We have a cluster with two managed servers and a JMS server on a migratable target on WLS 10.3.2. We have some MDBs within an EAR module deployed on the cluster. When the managed servers are restarted, WLS produces the following warning:
<The Message-Driven EJB: LogReceiver is unable to connect to the JMS destination: jms/loggingQueue. The Error was:
javax.naming.NameNotFoundException: Unable to resolve 'jms.loggingQueue'. Resolved 'jms'; remaining name 'loggingQueue'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at weblogic.jms.common.CDS$2.run(CDS.java:222)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.jms.common.CDS.getDDMembershipInformation(CDS.java:216)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.createMDManagers(MessageDrivenBeanInfoImpl.java:1295)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.activate(MessageDrivenBeanInfoImpl.java:1092)
at weblogic.ejb.container.deployer.EJBDeployer.activate(EJBDeployer.java:1324)
at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:480)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:415)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:75)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:67)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:54)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
We have configured a System module with a ConnectionFactory on a default targetting and a Queue deployed on the JMS Server. The jndi names for the ConnectionFactory and the Queue have been properly configured.
Apparently, the container tries to bind the MDBs with their relative destination, but is unable to proceed due to the cluster jndi not having been loaded yet. According to the documentation, we could manage to avoid this early binding by specifying
<wls:start-mdbs-with-application>true</wls:start-mdbs-with-application>
in weblogic-application.xml. I tried (also using false, because the documentation is not that clear in this aspect), but without any result. Is there a reason why we cannot manage to have the mdbs connecting later with their destination?
Also, we got a warning message in the deployment page, claming that the MDBs in the server that is not hosting the JMS server are not connected to their destination. They stuck on state "initializing". While, if we manually resume the connection, via console, the state turns to "Connected". Are these issues correlated somehow?
Any help will be very much appreciated.
Thanks in advance,
- Francesco.

Hi Francesco,
From the link below (i.e. Oracle link for WLS-11g) it states that
“Set to false to defer message processing until after WebLogic Server opens its listen port.”
Search for: start-mdbs-with-application
Link-1 http://download.oracle.com/docs/cd/E15523_01/web.1111/e15493/summary.htm
*# Conclusion:*
This means that “false” should have resolved your issue but it is not so this might be a bug. Similar bug was seen in WLS-9.2 version which was fixed in WLS-9.2 Mp-1 version check out the link below.
Search for: CR293982 or CR299012
Link-2 http://download.oracle.com/docs/cd/E13222_01/wls/docs92/issues/known_resolved.html
However if it was fixed in WLS 9.2 Mp-1 then the same issue is most probably taken care in WLS 10.x.x version also.
*# Suggestion:*
- Try to set “start-mdbs-with-application” as “true” and check if that works for you.
This is because if you read the “Link-1″ carefully it states that “With default setting of true”, however when you check the “Default” column it shows “false”. Hence cant say which one is default. It might be document bug as well. However you have tried it so you can skip this suggestion.
*# How to solve this issue:*
1) Create a simple test case to prove that “start-mdbs-with-application” when set as “false” does not work.
2) Open a ticket with Oracle and provide all the details with the test case and let them do their job.
Hope this information helps.
Regards,
Ravish Mody

Lync 2013 - Silent install via .msp does not work

The thread listed below is marked as "answered" and indeed the answer given is correct and should work. . . but recently it seems to have stopped working for many.
(EDIT: Site will not allow me to post the link I was planning to post, "until it verifies my account." So, I can only refer you to the thread named "Lync 2013 Client - Silent Installation")
Specifically, it should be possible to do a silent install of Lync 2013 by following the instructions given in the link above to use setup.exe /admin and create an .msp to put in the "updates" folder for the silent install.
The problem is, recently (September 2014-ish) this appears to have stopped working. The thread quoted above has several people replying, all during September 2014, that this method does not work. I am among them. Lync 2013 runs through
the setup, but only Office Tools ever appears as installed in the Start menu. However, if you go to Control Panel, Uninstall Programs, and look for Lync 2013, it is listed there. You can then tell it to "repair" the Lync installation,
and it reinstalls properly. This, of course, defeats the whole purpose of trying to do a silent install, however.
Since it appears that the .msp silent install method used to work, but now does not -- what changed? And what kind of workaround can be used?

Hi,
Did the Lync Package to be the latest version from Microsoft Website?
As the issue have been met by several users, you can feedback the issue on the link below:
http://blogs.technet.com/b/lync/archive/2012/11/01/lync-app-feedback-you-asked-and-here-it-is.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

I have adobe reader installed but it does not work

I have adobe reader installed but it does not work

What is your operating system? Reader version?
What does "not work" mean?

After Installing Lion, Ical does not work. I cannot print, I cannot add an event, etc. How do I reinstall?

Since installing Lion OS, iCal does not work. I cannot add an event, print calendar, etc. How do i reinstall?

You can use Lion Recovery
Before you do that, go to ~/Library/Preferences
Move the com.apple.iCal.plist file from the Preferences folder to the Trash.
Restart your Mac.
See if you can print or add an event now.

My DotNet application does not work after installing Framework 4.0 on My client PC

HI
I created application in Visual 2010 therefore I need framework 4.0 to work my application on client PC but it is still not working.
I have few forms in my application.
Form contact has controls Textbox, labels, button on it. (This form works fine absolutely )
Form Invoice has DatagridView, textbox, label,button . (This form is NOT working at all, give me an error)
Any bright suggestion will help me to NOT install whole carp of visual studio 2010 on my client pc and also save Space.
Thank you in advance

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

LabVIEW Report Generation Toolkit in the application does not work

I have LabVIEW7.1 and LabVIEW Report Generation Toolkit for Microsoft Office 1.0.1, which was updated after installed. I made a VI in LabVIEW7.1 enviroment using the Report Generation Toolkit and it works very well. After the VI was build an application.exe and installed even in the same PC, the Report Generation Toolkit didn't work. Excel that should pops-up does not do anything.
the office i used is office xp. would you like to help me?
thank you very much.
Jing

When you build the application, you have to include as "Dynamic vi" in Source file tab the vi:
_Word Dynamic VIs.vi. from _wordsub.llb
_Excel Dynamic vis.vi from -Excelsub.llb
in the following library
...\National Instruments\LabVIEW 7.1\vi.lib\addons\_office\"
Refer to the following discussion thread
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=50650000000800000053460000&ECategory=LabVIEW.LabVIEW+General

Email Setup Application Does Not Work After Update

I seem to be having the same problem as others with the email setup application.
When I updated my Blackberry to the new OS6, I went to my email setup and it said "looking for updates"
It finds a new update from my already installed email setup app 6.0.0 to the new 6.11.0419.0755.
When I click "download" it says replace existing version? I click "yes"
The it says: "com.rim.bis.client" contains a different version of module "net_rim_bis_client" which is also used by email setup application. If you proceed, "email setup application" may cease to function properly. proceed?
If I click "yes proceed" it crashes my blackberry and it will not reboot and I have to do a complete hard reboot, wipe the device and reload everything from my backup on blackberry desktop.
If I click "no" not to proceed, I cannot open the email setup application.
I have tried downgrading to version 5 of the OS, I have rebooted with a battery pull, crashed my blackberry twice and spent hours reloading all my applications and systems. I am at the end of my rope, and I don't know what else to do?!
If there was a way to turn off the automatic search for updates on my device under the setup and email settings, i think I would be able to set it up in the older version 6.0.0
HELP.

yep same problem here
i had this problem and got a replacement handset.
i have had to do an update and got the same issue yet again.
The funny thing is, is when i got my new handset i had to run the email setup application and it worked fine.
now its failed and i have to boot in safe mode and wipe etc.
Will someone sort this out???!! O2, Blackberry whoever. Shambles!

Flash Player has downloaded/installed, but still does not work

This is a relatively new problem for my computer, but from what i have read, is a common problem so I know it is not my computer. Out of the blue, click on a video and all i see is a black screen. No adobe logo saying i needed to update or download in order to watch video. So i unistalled, rebooted and reinstalled..nothing. I uninstalled/installed with zip..nothing. Everything that is enabled is enabled..nothing. Reset IE...nothing. Downloaded Mozilla..nothing. I am currently running windows xp, IE 8 (32 bit) and all security software are disabled. The crazy part is that when i check the file for flash player, it does not show any bites in file. I know there should be bites in there because i checked on a computer with working flash player and it shows 6.00 mb. So somewhere from the installation, the file is lost. i have tried pretty much all suggestions, dating back from '09 and really really need some advice.

ok..flash player x is listed. always has been. i don't understand the whole "no files" bit cuz the computer that i am using show 6.00mb in files. unless it is outdated? this computer is brand new, custom made as of last month to my specs, so i can't see how adobe would be outdated. Mozilla shows in my add/remove files, but that flash player plugin is nowhere to be found. in fact, this is all the adobe files i see in order:
Adobe AIR
Adobe Download Manager
Adobe Flash Player10 Active X
Adobe Flash Reader X
Adobe Shockwave Player 11.5
i am really not liking mozilla, however...upon clicking a video, it is telling me i need to update to newer version of adobe. When i click on dl, it gives me a window to save as a binary file. it will not download and all security/firewall are off. Shockwave has always been enabled. pretty much anything you posted to do in past threads..i have done. its driving me crazy
i can bring up other websites, just cannot watch videos and was stuck on that redirect to adobe forum..will try the forum again.

IPod Remote application does not work with Ethernet

I can control iTunes on my MacMini from the Remote application on my iPod Touch only if the Mini is connected to the router by WiFi, but not if it connected by Ethernet cable. Unfortunately, I need to connect the MacMini to the router by Ethernet (because of another problem), but this is preventing me using the Remote application.
The wireless access point is an Airport Express connected to the router by Ethernet cable. The iPod Touch communicates with the Airport Express.
The Remote application cannot find my iTunes music library. However it can connect to the MacMini using "ssh". When I select "Add Library" on the remote, the iPod does not show up in iTunes on the Mini. I have tried turning off the firewall in the MacMini but this does not help. However, if I connect the MacMini by WiFi instead of Ethernet cable, it works fine.
My router has a firewall between the Internet and the LAN, but not between the LAN ports. I also cannot see any settings on the Airport Express that might block this connection.
Any help would be appreciated.

similar (unresolved?) issue here https://discussions.apple.com/message/9480306#9480306

Re-installing an application does not work

Similar Messages

Maybe you are looking for