Re-installing Creative Alchemy does not seem to work?

Hi,
I could really need some help regarding the Creative Alchemy install on Windows7 BETA 64bit!
I did successfully install the latest Auzentech Prelude driver package over at Auzen, along with the latest Creative Alchemy without any issue (had to be launched in Vista RTM compability mode, that's all)
But those RC8 drivers from Auzentech didn't prove to be that good on Win7 BETA to say the least, then I stumble upon this X-Fi Support Pack by Daniel_K (thanks once again mate!) and before installing that I did of course un-install all that followed with the Auzentech Prelude RC8 driver package, including the Alchemy applications, along with DTS, Dolby Li've, Audio Console etc..After that I ran Dri've Sweeper to make sure all was gone!
The X-Fi Support Package installed without any issues at all, and finally the drivers are working!
But now Alchemy suddenly refuse to install? Neither the older Alchemy version over at Auzen nor the latest one from Creative will install?
I just get this error 6003:.
" Setup has experienced an error.
Please do the following:
- Close any running programs
- Empty your temporary folder
- Check you Internet connection (Internet-based Setups)
Then try to run the Setup again
?Error Code: -6003 "
Have any of you stumbled upon this issue before? How on earth can I resolve it's
I tried to completely un-install the X-FI Support Pack, ran Dri'veSweeper and made sure everything that had to do with both Auzentech and Creative got wiped from my computer, I ran CCleaner and it's regcleaner, I ran disk cleanup etc.. But still the same error?
Do I really have to re-install the entire operati've system to make Creative Alchemy install once more?
There has to be some reason for this error? Is there something hidden on my computer blocking the install or something? Do any of you have this problem if you try to un-install and then re-install Alchemy?

RamGuy wrote:
Hi,
I could really need some help regarding the Creative Alchemy install on Windows7 BETA 64bit!
I did successfully install the latest Auzentech Prelude driver package over at Auzen, along with the latest Creative Alchemy without any issue (had to be launched in Vista RTM compability mode, that's all)
But those RC8 drivers from Auzentech didn't prove to be that good on Win7 BETA to say the least, then I stumble upon this X-Fi Support Pack by Daniel_K (thanks once again mate!) and before installing that I did of course un-install all that followed with the Auzentech Prelude RC8 driver package, including the Alchemy applications, along with DTS, Dolby Li've, Audio Console etc..After that I ran Dri've Sweeper to make sure all was gone!
The X-Fi Support Package installed without any issues at all, and finally the drivers are working!
But now Alchemy suddenly refuse to install? Neither the older Alchemy version over at Auzen nor the latest one from Creative will install?
I just get this error 6003:.
" Setup has experienced an error.
Please do the following:
- Close any running programs
- Empty your temporary folder
- Check you Internet connection (Internet-based Setups)
Then try to run the Setup again
?Error Code: -6003 "
Have any of you stumbled upon this issue before? How on earth can I resolve it's
I tried to completely un-install the X-FI Support Pack, ran Dri'veSweeper and made sure everything that had to do with both Auzentech and Creative got wiped from my computer, I ran CCleaner and it's regcleaner, I ran disk cleanup etc.. But still the same error?
Do I really have to re-install the entire operati've system to make Creative Alchemy install once more?
There has to be some reason for this error? Is there something hidden on my computer blocking the install or something? Do any of you have this problem if you try to un-install and then re-install Alchemy?
Absolutely no problems installing ALchemy on Win7 x64.
Are you running the self-extractor?
Try to extract its contents with WinRAR or WinZip and run setup.exe.
More info about this error:
http://kb.acresso.com/selfservice/mi...Q08054&sliceId=

Similar Messages

  • I am now using v3.68 and tried updating to v7.01 but it does not seem to work. Went to control panel to remove all the old versions but Firefox was not listed there although Thunderbird is there. Please advise asap, thanks

    I am now using v3.6.8 and tried updating to v7.01 but it does not seem to work. Went to control panel to remove all the old versions but Firefox was not listed there although Thunderbird is there. Please advise asap, thanks

    I recommend backing up your Firefox settings in case something goes wrong during the uninstall/reinstall process. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    In the Control Panel, Add/Remove programs, look for '''Mozilla Firefox'''. Make sure to save (do not delete) your personal settings when uninstalling.
    If it isn't there, just try installing 3.6.23, which is the latest in the 3.6 family. You can download 3.6.23 here: http://www.mozilla.com/firefox/all-older
    With respect to version 7.0.1, are you saying that the installation failed, or it seemed to work but it's nowhere to be found?

  • HT1338 My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

    My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

    Hi ...
    Checked to see how much free space there is on the startup disk lately?
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
    Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
    If disk space is not the issue, booting in Safe Mode deletes system caches that may help.
    A Safe Mode boot takes longer then a normal boot so be patient.
    Once you see the Desktop, click the Apple menu icon top left corner of the screen.
    From the drop down menu click Restart.
    See if that makes a difference ...

  • In FF4 the opensearch detection does not seem to work. how can I add a search engine , that has an opensearch xml but no plugin?

    if you go to a webpage with an opensearch link tag like "<link rel="search" type="application/opensearchdescription+xml...." FF3.x highlighted the small arrow left of the search box and you could add the search engine. this does not seem to work in FF4.
    If a searchengine for example for the intranet, does not offer a plugin, just the opnesearch xml, how can one add it to the search engines in FF4?

    You do not get the blue glow on the search engine icon in Firefox 4, but you should still see the "Add ... site" entry in the menu if you click the search engines icon on the Navigation Toolbar.

  • HT1923 I am using windows 7 and have upgraded itunes to 11. Now when I open my music library in itunes and click on a song it says "original file could not be found" Over 2000 songs come up this way and locate does not seem to work. Before the upgrade all

    With Windows 7 I upgraded itunes to 11. Now in my itunes library, when I click on a song "original file could not be found" comes up. This happens with over 2000 songs, but it seems to be ones I recorded from cd's. Locate does not seem to work. Has anyone else had this problem?

    Highlight a song that is supposedly missing, press CTRL+I to Get Info, say no when asked to locate the file, then look at the summary tab. Where does iTunes "think" the file should be? Where is it really? You may need to give a configuration file a minor tweak.
    tt2

  • I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to

    I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to upgrade to CS6 at this time.

    If you had given us sensible information, I could look it up for you if your efforts fail.
    Right now, I don't even know if you are on a Mac or on a Windows box.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • My movie has clips that have some extracted audio that I would like to use for the menu music in iDVD 11. Does anyone know how to do this? Copy and paste does not seem to work.

    My iMovie 11 movie has clips that have some extracted audio that I would like to use for the menu music in iDVD 11. Does anyone know how to do this? Copy and paste does not seem to work.

    I would use Quicktime Pro.
    See: QuickTime Pro: How to Extract or Disable Tracks at http://docs.info.apple.com/article.html?artnum=42596 and QuickTime Player 7 Help - Extracting, Adding, and Moving Tracks at http://docs.info.apple.com/article.html?path=QuickTime%20Player/7/en/c3qt6.html
    To get Quicktime 7.6.6 for Snow Leopard see: QuickTime Player 7.6.6 for Mac OS X v10.6.3 at http://support.apple.com/kb/DL923  (Quicktime 7.6.6 is the latest version.)
    To upgrade to Quicktime Pro see: QuickTime Player 7 Help - Getting QuickTime Pro at http://docs.info.apple.com/article.html?path=QuickTime%20Player/7/en/c2qt.html

  • I used to be able to refresh a page by hitting the F5 key. That does not seem to work anymore. Is there a keyboard shortcut for refresh, or can I create one?

    I used to be able to refresh a page by hitting the F5 key. With 4.0.1, that does not seem to work. Is there a different keyboard shortcut, or can I create one?

    Click the Refresh button on the right hand side of the location bar container on the Navigation Toolbar or press "Ctrl + R" or F5 to reload a web page.
    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)

  • Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

    Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

    Good day!
    A simple Paste does not work for you?
    It should place the clipboard content as a new Layer which you can then move around.
    If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
    Regards,
    Pfaffenbichler

  • Encore CS5 - override does not seem to work

    I have been producing DVD's using Encore CS5 for some time now.  I usually create one single encoded file with many chapter points on it, using buttons on several menus for direction.  During the menu creation I select the relevent chapter point on the encoded file by using the button link facility in the properties menu and then set override back to the original selcted button on the menu using override  "link back to here".  The means that when the menu select button is pressed on the DVD player remote it returns to originally selected button in the menu screen.  I have just started creating blu-ray projects and have tried to do exactly this when creating a blu-ray menu but this does not seem to work.  What is annoying is that when you do a preview using the Encore preview player all looks good and the return seems to be successful.  It is only when you try to play the disc on a blu-ray player (and I have tried several different makes and all do the same) does the return to the originally selected button on the menu fail, returning to what seems to be any random menu button. I have seen what has already been posted in the Forum on this and tried several of the options there, although most seem to do things slightly differently than me, linking several files together and not using a single file.  All to no avail.  Anyone any ideas what I am doing wrong.  Roger

    Jeff
    Thanks again for your prompt response much appreciated and yes pressing the menu button on the blu-ray remote returns you back to menu 1 button 1 from both menus.
    Full project setup.
    There are two timelines "Start" and "Showtime"
    "Start" which is first play has 1 chapter point
    "Showtime" has 23 chapter points. These are split between the two menus.
    Main project properties:     First Play - Start Chapter 1, Override - not set, Title button - menu 1 button 1, this is possibly why the blu-ray menu selection on the remote returns here from both menus.  If I don't set this then the project errors with "Title remote not set".  I cannot set this to "Return to last menu".
    Start properties:         End action - menu 1 button 1, Override - not set,  Menu remote - return to last menu.
    Showtime properties:   End action - return to last menu, Override - not set, Menu Remote - Return to last menu.
    menu 1:  End action - menu 1 button 1, Override - not set.
    menu 2:  End action - menu 2 button 1. Override - not set
    I do have background music on each menu set up in "Motion".
    All buttons on both menus are set to the relevent chapter points on the "showtime" timeline with no override
    nothing else set.
    I hope this makes sense.
    Roger

  • HT5343 Resetting the DNS cache does not seem to work on OS X 10.8, what does really work?

    Resetting the DNS cache does not seem to work on OS X 10.8, what does really work?
    Desired activity: access a site that used to not have a SSL connection through the new https:// root domain. I can accomplish the task over a machine running Windows 7 or XP but flushing the dns of my mac does not affect the outcome — I am still redirected to the hosting provider's website whenever I tried to access the domain with a https:// prefix rather than http://
    I tried sudo killall -HUP mDNSResponder and it's older alternative but no luck.

    In the terminal:
    dscacheutil -flushcache
    and to get a very detailed report on the state of your DNS cache in /var/logs/system.log:
    sudo killall -INFO mDNSResponder

  • Hi. I have the ipad 4 and have got a Vodaphone ( India) data sim, however it does not seems to work. The CS support at the gallery and the call center is lousy as they dont seem to know what they are upto. Although the sim is active i am unable to surf.

    hi. I have the ipad 4 and have got a Vodaphone ( India) data sim, however it does not seems to work. The CS support at the gallery and the call center is lousy as they dont seem to know what they are upto. Although the sim is active i am unable to surf. The vodaphone number is
    9168554687. Please assist

    Since this is a carrier issue, we are probably not going to be able to help you. You are paying for this service, so be assertive when you call customer service.

  • The search feature in messages does not seem to work with pre IOS 7 messages

    After updating to IOS 7 the search feature in the Messages app does not seem to work with messages received prior to the update.  Texts received since the IOS 7 update search correctly.  Is this a bug or a feature of moving to iMessages rather than just receiving standard texts?

    Although not related to your question you have outdated ShockWave Flash Player go ahead and update your flash player by going to www.get.adobe.com/flashplayer
    As for your problem, One of your add-ons might be the culprit too. Try running Firefox in [[Safe Mode]] with all add-ons disabled. If that solves the problem, see [[Troubleshooting extensions and themes]] and possibly [[Troubleshooting plugins]]

  • Cap 6:  Issue when publish to PDF.  The exit button on the skin does not seem to work.

    All, 
    I attemped same using Cap 6:  Issue when publish to PDF.  The exit button on the skin does not seem to work.  I switched out skins and same issue.  I am using IE8. 
    When published as swf, exit button on skin works fine.  Any ideas on solve for the PDF version exit button?  We would rather publish as PDF since all files are contained in the PDF wrapper.

    Hello,
    Welcome to Adobe Forums.
    This issue is reproducble at my end, need to do some more testing before I can tell you any solution or action plan for this issue
    Thank you for your patience.
    Regards,
    Vikram

  • Select color does not seem to work in 2014.2on my mac. I don't understand what I am supposed to change in preferences

    I see there are references to select color not working on the mac. Mine does not seem to work but I think it did when I first downloaded. There is some discussion of changing preferences... In what way?

    Photoshop. 2014.2.2release.
    or 20141204 . r.310.x64
    MacBook Pro The ye dropper should be able to select a given color and find it throughout the image. And it should be adjustable to select colors that are related. I am only getting a "no pixels selected" error message. Even if there is one layer.

Maybe you are looking for