Re-installing drivers Probelem *he

Ok, I have a creative x-fi extreme gamer sound card and it was previously installed on my system. Something was wrong with the sound for some reason so I un-installed the driver and tried to re-install the new driver.
The driver version I am trying to install is the new SBXF_PCDVT_LB_2_5_0004 driver for Vista 64-bit. For some reason now, every time I click the installer to install it starts up and then I get the error "You have previously installed drivers without rebooting. Please reboot and try again."
I tried to reboot and have uninstalled every piece of software with the name creative on it, also went to the device manager to uninstall the card to and it still doesn't work. I also tried removing the card, booting up my system, turned it off, put the card back in, and started it again to try and install the drivers and I get he same thing.
Can anyone help me please, what do I need to do to get my sound back?
Thanks
-Cody

Similar Messages

HT2305 I have a new computer with Windows 8 OS. Do I need to install drivers so that my Ipod Nano will sync with this new computer:

My daughter gave me a new Ipod (Nano) for Christmas. I had no problem download my songs from my old Ipod (Shuffle) to the new one. However - since I do not buy songs on a regular basis, I did not buy a new song until 4/29/13. Now for information...sometime in March my old laptop died, completely. I had to go buy a new one - which I did and this new one has Windows 8 Operating System on it (which I hate, btw).
Now, when I bout a song on Tuesday, the song did not go to my new Ipod. I tried everything and finally had to talk to a tech - who was very kind in helping me and we did get all my songs from Itunes to this new computer. I thought the song I bought would then go on the Ipod - but it did not. I had already hung up from the tech - since we had been talking on the phone for about an hour. He informed me that he was giving me a "courtesy break" because it has been over 90 days since my new Ipod was purchased ---- just my darn luck!
Anyway, I have figured out on my own that the new Ipod Nano is not synced with the new laptop with Windows 8. I have been trying for the last 2 hours to get it to do so and in doing so, found out that Windows 8 is not mentioned in any of the help forums. So...my question is: Do I need to install drivers on the computer or what? I will not be purchasing anymore music from Itunes until I get this matter resolved. Any help will be apreciated. Thank you.
Judy1942

Try http://members.lightroomqueen.com/index.php?/Knowledgebase/Article/View/1165/187/how-do-i- move-my-catalog-photos-and-other-lightroom-files-to-a-new-computer

Problem with installing drivers Audig

I re-installed my PC today, but I can't get my SoundBlaster installed properly.
I downloaded the latest driver for my Audigy 2 on Windows XP SP2:
SBAX_WBUP2_LB_2_09_006.exe
After the installation process on the final Windows reboot it ends with a generic critical failure. The drivers seem installed, my PC finds the Audigy 2 after installation, but the control console doesn't appear, nor am I able to find it in the Creative directory. I do get sound, can play MP3's etc and hear game sounds, although I am not 00% sure whether eax is working properly.
I also tried to install the old drivers from the CD-ROM, which worked. When I use the auto-update afterwards and the driver is installed the console is still there, but doesn't work anymore with reporting that: no soundcard installed/found or something like that.
I tried a couple times and with driver cleaning in between etc, but can't get it working.
Is the current driver broken or do you have some advice on what to do?

it's possible that you don't have nvidia graphic adapter.
for bluetooth issue, make sure you switch the button ( probably front side of your computer ) and activate bluetooth by pressing fn + f5 ( activate it )
after then, if you have bluetooth device, you can install drivers.

Vista 32 - ipod not recognized, failed to install drivers, disconnecting

Hi to all,
I have experienced a problem with my brand new Ipod classic 80GB and was flustrated by it. It took me some time ro research internet to find a fix for this problem and i would like to share it with you to have it at one place. If such article exists here i appologize, i did not find it myself.
_The problem:_
Ipod in Windows Vista 32 *cannot find/install drivers*. Ipod shows up for couple of seconds and then *automaticaly disconnects*.
Solution:
i have found solution that worked form me at this site
[http://teknobabble.wordpress.com/2007/08/18/vista-driver-problems-installing-a- usb-media-reader-a-solution>
Thanks to the autor of this article and i hape this helps some of you having the same problem as i had

Can you be specific as to what drivers are not installing? An issue that can be had when doing PNPEnum is that child devices of something that does not have a driver installed are not visible to the PNPEnum. A way to get around that is you can force the
injection of drivers that are not getting installed. Something like you can add a second Inject Driver step but, have it be a selection profile of drivers that always get missed because they are children.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Can no longer install drivers and touch screen not working anymore

I have the HP 520-1130ea all in one PC. Its a touchscreen. I have Windows 7 home premiun 64 bit operating system.
it has been working fine for the last two years and on Friday 11th april, i connected my android tablet (samsung Galaxy tab 7.0) to my pc and it could not install the drivers so my PC could not see the tablet. Last week this worked ok. I attach my tablet to my pc using a USB cable and transfer files by usb transfer. I dont use any software at all.
I have tried to reinstall the drivers for the android tablet and i get the error code that the drivers were found but they cant be installed. Access denied.
I have also tried to restore my pc to the last time everything worked ok which was just a week before the problem started, but the restore has failed on 4 occassions.
I have now deleted all updates on my PC from last week and i think I have deleted something or failed to allow something to isntall (a box popped up when i restarted the computer after the update delete which I ignored)
No my touch screen no longer works.
I plugged in an external hard drive to back up my computer and I also could not install the drivers for that too. this just happened today.
My printer is connected to my PC and that still works ok.
I have been battling with this for 4 days now and ploughed the internet for solutions and no hope in sight!
I have also tried:
1. installing optional updates. no luck there. also some of the updates failed
2. giving myself full control on the system 32 folder in windows.
I am the administrator on the PC.
HELP PLS!!!

Hi compnewbie,
Welcome to the HP Forums!
Thank you very much for your thorough post and detailed steps! I see that you are not being able to install drivers, and I would be happy to assist you!
The first suggestion I will make is to boot your computer in Safe Mode. To do this, please follow this document on Windows 7 Safe Mode. No extra software will be loaded, which will make this driver issue easier to troubleshoot. In Safe Mode, try to connect your external drive.
If you still cannot connect your external drive (or any other USB device), I recommend following this resource on Testing for Hardware Failures (Windows 7). This should help diagnose any potential hardware problems with the computer.
If you are not able to detect any hardware problems on your computer, please follow this document on Restore files from a backup.
Please re-post with the results of your troubleshooting, and I will diligently follow up with you!
Best regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

IPod Nano (4GB) Not Installing Drivers

I ran the installer software on the installation CD and re-booted as instructed.
On re-boot Install Shield dialog box comes up does something and then goes away. Boot continues normally.
Checked iPod Service and it is running.
Plugged in iPod and Windows tells me that it has found new hardware and wants to install drivers. Device Manager shows "iPod" under "Other Devices." I let it search for drivers but it doesn't find them.
How do I get the driver installed!?!
Thanks.

hmmmm. ipods use the standard Windows USB mass storage drivers. so if it's asking for drivers at that stage of proceedings, the techniques in this MarkJones post might be of some help:
MarkJones: Re: Windows XP (SP2) Laptop only finds generic "New USB 2.0 Device"

Cannot install drivers. No Intel(R) Adapters are present in this computer

Cannot install drivers. No Intel(R) Adapters are present in this computer
Cannot install drivers. No Intel(R) Adapters are present in this computer
Reads the error message I purchased an RaLink USB Wireless adapter IEEE 802.11 b installed in an XP Pro system, an Intel D925XEBC2 MB with A P4 CPU 3.80 GHZ
I have 4 gigs of RAM installed but it reads only 2.87 RAM on system properties
I installed the RaLink Drivers and the Ralink interface. I get a strong signal and see that the wifi is there but cannot connect. The 1394 Net adaptor #2 is showing as is the USA wireless card
I was asked to install the PIN which I assumed meant the network security but my keyboard will only input numbers not the letters, otherwise the keyboard operates properly on notepad but not on the RaLink software
Under other devices it shows both the Ethernet controller and the Network controller with a question mark "?".
I have tried uninstalling and starting the computer several times but they will not install correctly.
The windows interface shows no wi fi system at all. After going back and forth now both windows and the RaLink interface shows no wifi system.
When I went to https://downloadcenter.intel.com/detail_desc.aspx?agr=Y&DwnldID=18717 and downloaded the 32 bit file and tried to install it I got the error.

Hi there,
you're in the wrong forum, but I'll try to guide you.
(a better forum for your question would likely be this:
http://social.answers.microsoft.com/en-us/windows/forum/networking?tab=Threads )
Your RALink wireless adaptor is not manufactured by Intel, that's why Intel driver download won't help you.
You need to go here (RALink is now Mediatek) to get the drivers for your adaptor
http://www.mediatek.com/en/downloads/
Good luck! :)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

HT5628 After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp "removed" the DVD drive!

After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp “removed” the DVD drive. I think there is an issue because I reinstalled Windows 8. If I don't install driver, then I have reduced functionality (no Apple keyboard, no sound etc), but once I install driver, I lose my DVD drive.

Hi, guys, I have had the exact same problem since the summer of 2010. Here's what I was able to find out.
Deleting upper/lower filters, running all those Fix Ya programs and other Microsoft crap is useless. This problem is most certainly has nothing to do with registry of any software on your computer. I took my HP 9620us to a couple of repair places and, they tried a lot of things and it appears that the root of this problem is a faulty motherboard connection. Of course, it costs about 400 bucks to fix it so I'm not sure I want to pay this kind of money.
Anyway, if somebody was able to fix it PLEASE post here to let us know. Again I am 99 per cent sure it's some piece of hardware in the motherboard.

Officejet 7500A installing drivers, missing dll file, can't scan

I have a new laptop with Windows 7 Professional, using first the cd, I installed drivers to use my Officejet 7500a on my wireless network, during installation it said it could not find file HPWia2_OJ7500_E910.dll and asked if I wanted to continue. I did and in the end could not set up the scanner. So per HP website and uninstalled all software and reinstalled, this time from the HP site. Same exact thing occurred. Again, worked through the process and uninstalled and reinstalled drivers again, same problem, "can't find file". Scanner is the one thing that doesn't work. Printer appears to work fine but I really need to scan as well. Thank you in advance for your assistance.

Hello aaatexas,
Welcome to the HP Forums.
I see that you are having an issue with installing the printer.
I'm going to give you a Microsoft link that will show you how to do a clean boot in to the computer. Once the clean boot is finished and the computer is restarted, please attempt to reinstall the software and drivers for the printer.
Here is the link for the instructions on How to perform a clean boot in Windows.
Please feel free to write me back if you have any other questions or concerns.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How to manually install drivers for windows 7 64 bit?

How do I install drivers for iphone 5s? My desktop windows 7 64 bit is not recognizing the iphone

Download and install the 64 bit version of iTunes to get all drivers for iOS devices.
http://www.apple.com/itunes/download/

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

Is it possible to install Windows 7 without using BCA to install drivers and using the support 5 software for drivers on my iMac 2014?

What I am wondering is if I can install Windows 7 on my iMac 2014 without using BCA to install drivers and using the manual download Support software without bricking my system. The issue is that I recently moved into the country without a reliable data connection, so I'd like to download all the drivers from when I'm in town generally. Any info is appreciated.

Mikhailov wrote:
Hello,
I'm trying to purchase inexpensive computers for my classroom. One of the computers I'm looking at is the new $200 HP Stream 11. My school's IT department said it might be difficult to install the district's copy of Windows 7 on these computers if I purchase them. Does anyone know if it's actually possible to uninstall Windows 8.1 and install Windows 7 using an external USB or external CD Rom Drive? Any help would be greatly appreciated.
The District is right to say what they told you they can't install Disctrict Windows 7 on your computer because they have a license agreements with MS and doing so will violate their Terms of Agreement. And you shouldn't be asking something like that to start with. If that laptop can't install Windows 7 it then your stuck with WIndows 8 unless HP has downgrade to go back to Windows 7 on it otherwise if none exist you will not get any drivers or support for it. You best luck is to find a used Windows 7 laptop and order the HP recovery media for it and wipe it clean to factory install and register it to you and that will give you a Windows 7 maching to start with.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

HT1461 I have installed the Windows 8 on my MacBook using BootCamp, but I cannot install drivers for Windows now

I have installed the Windows 8 on my MacBook using BootCamp already, but I cannot install drivers for Windows now: I've got only BootCamp 3 disk and it doesn't goo even if I start it using compatibility options. And my BootCamp on Mac didn't offer me to burn cd with drivers for windows as I saw in many instructions. How can I resolve the problem? Thanks a lot.

Go back to Boot Camp: on the 2nd page you get this:
Download the support software and as Windows is already installed uncheck the 2nd box.

HT4818 I can't install drivers Nvidia Geforce GT120 Boot camp windows 7

I was using windows vista in Boot Camp, but now I installed windows 7. My problem is I can't install the drivers of the Graphic card Nvidia Geforce GT120 using the CD drivers. However, I tried to download directly from the webpage Nvidia.com/drivers but at the moment to running the installation assistants, it doensn't detec any graphic hardware.
Please help me!
Thank you!

I can solve my problem! I used a programme called 3dchip that helps to the computer to recognize and install drivers!
Thank you mende1 for your time.
Nice to enter in your community!
Arn267

In which boot camp support software I can install the drivers for win 7 32 bit.my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers

in which boot camp support software I can install the drivers for win 7 32 bit.
my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
also my macbook pro model is MC723.

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

Re-installing drivers Probelem *he

Similar Messages

Maybe you are looking for