Re-installing DVD Pro

I need to re-install DVD Pro.
What is the best way? Do I drag the current application and all support folders to the trash? Or is there an Uninstall feature that I have missed?
Any help is appreciated.
Thanks,
SC

Steve:
No, there is no an uninstall application.Check this Apple doc about DVDSP Troubleshooting:
http://docs.info.apple.com/article.html?artnum=302641
You'll find some information about re-installing the software.
Hope that helps !
Alberto

Similar Messages

Install DVD Pro After Final Cut Pro X

I have a new system on which I've installed Final Cut Pro X and Motion 5. I still have quite a bit of use for DVD Pro, however. Is it possible to install just the DVD Pro application on a disk that has Final Cut Pro X on it? Or is this going to muck with the new apps?
Thanks,
Dan

When has apple declared the DVD format dead, I certainly haven't heard it.
There is still a huge demand for DVD and will continue at least for another two years if not longer.
Unless there is a better alternative my business depends on DVD format.
@Daniel02
You can custom install FCP studio, and have DVD studio pro installed,
However I haven't tried installing it after FCPX, but I do not envision a problem with it.

I am trying to install the quicktime player 7 pro and I do not have my install dvd what do I need to do?

I am trying to install the Quick Time Player 7 pro upgrade and I need the install dvd
I do not have the dvd ...I know my apple is old but I have no idea where that dvd is.
how can I work around this?

If you have the QuickTime pane of System Preferences, put the key into it. If not, click here.
(125357)

If I do a clean install on my MacBook Pro will I be able to re-install apps (FCP, Aperture, MS Office etc.) from a Time Machine backup, or will I need the original install DVDs with authorization codes?

I have two questions...
1) If I do a clean install on my MacBook Pro will I be able to re-install apps (FCP, Aperture, MS Office etc.) from a Time Machine backup, or will I need the original install DVDs with authorization codes? (because I don't have them)
2) Has anyone ever seen anything like this before on their computers?
The Apple Genius' were stumped by my laptop issues and said they'd never seen anything like it before and recommended I did a clean install. Below you can see my trash bin, and if you look at the "Empty" button it reads "N201" and then there's the "N39" to the left of it. You can also see these numbers over by the folder area--"SD5, SD6, SD7." But that's not all...
When I right click on items I see the numbers again. Instead of "Open with" I get "N152" and there's an "N35" and "LB1" towards the bottom.
I have no idea what's going on so I'm just going to do a clean install on my machine but I don't want to lose my apps. I don't have the original install DVDs for them anymore. If you have any suggestions please let me know. Thanks!

You don't lose them. You can always redownload them from the app store after you log back in with your Apple ID.
"Buy, download, and even redownload.
You can install apps on every Mac you use and even download them again. This is especially convenient when you buy a new Mac and want to load it with apps you already own."

The certificate on my applications install DVD has expired. I am unable to reinstall with this dvd on my snow leopard on macbook pro. Pl help.

The certificate on my applications install DVD for bundled software has expired. I am unable to reinstall with this dvd on my snow leopard on macbook pro. Pl help. If I use Lion, it works fine with the expired certificate. But doesnt work with snowleopard.

Create a DMG file of your DVD (instructions here: http://www.wikihow.com/Make-a-DMG-File-on-a-Mac).
Then follow the instructions here: http://managingosx.wordpress.com/2012/03/24/fixing-packages-with-expired-signatu res/

Can i install logic pro without the cd because my dvd driver of my mac doesn't work . i have the key for logic pro

can i install logic pro without cd ? , i have the key for the logic pro but my dvd driver of my mac doesnt work ?

Buy an external USB2 DVD/CD drive..... (Amazon's Basic model works great)
Or..
Borrow someone else's Mac that has a DVD drive fitted and use that via Remote Disk
Note:
There is no legal means of downloading available for Logic Pro 9.. unless you originally purchased it via the App Store..
Therefore, in your case, you must install from the DVDs you have...

Installing Windows 7 on my bootcamp partition (mid-2009 mac book pro with mountain lion) My computer won't boot from the Windows 7 Install DVD.

Hello,
I have been trying to install Windows 7 on my macbook pro (mid 2009, MBP53). I have successfully created a bootcamp partition using the assistant. When the computer tries to boot from the windows 7 install dvd, the screen is just black. The dvd spins for a bit, then stops and the computer is just black (no blinking cursor).
Any advice would be very appreciated.
Thanks.

What kind of an install DVD are you using for Windows?
You can use any DVDs that are hardware specific. Only the full non-hardware soecific DVDs work on the Mac.
Allan

Trying to install Win 7 on MacBook Pro with OSx 10.9.3 and computer does not recognize install dvd

I'm using a 2009 MacBook Pro running Mavericks 10.9.3 and I am trying to install Win 7 using BootCamp 5. I've been able to install BootCamp before using the original Win7 install dvd on this computer but ever since I updated it (not sure how many time, its been a year or so since I last used BootCamp) and started using BootCamp 5 its been giving me problems reading the DvD. I know my internal DvD reader works because I've imported music recently but whenever I get into the very first step of BootCamp 5 (Download Support and Install Windows option screen) I click next with only install windows option checked and it tells me to wait for the DvD to be recognized when its already in. However it does come up with the option later to open with/eject the "blank DvD" which is the Win install DvD. Any ideas on how to get around this issue?

Robert.Delfs wrote:
1. Brand new MacBook Pro 2.5 GHz Intel Core i7 machine with two graphics chips (Intel HD Graphics 3000+ AMD Radeon HD 6770M), with   OS X 10.7.2 Lion (Build 11C74) pre-installed.
2. Attempting to download latest version of Photoshop CS5 fails.
     a. Downloading CS5 from Adobe.com requires pre-installing Adobe Download Assistant.
     b. Adobe Download Assistant can be downloaded but cannot be installed because it requires pre-installing Adobe AIR.
     c. Adobe AIR can be downloaded but won't install. Sometimes it issues error msg saying it requires most recent version of Adobe AIR, other times there is no screen activity after attempting to install from <AdobeAir.dmg>.
2. There is no option to turn off automatic graphics switching in Energy Saver System Preferences on this computer, so that suggested solution does not work.
3.   Turning off (unchecking) "Automatically reduce brightness before display goes to sleep" has no effect — still unable to install AIR.
This is a nightmare. The reason I bought this computer rather than a less expensive model was to run Lightroom (which did install OK) and Photoshop CS5. HELP!
Robert
My suggestion would be to reinstall Lion from zero. No update.
I did that, and now I can install / uninstall Air without problems.
The installation takes about 20 minutes...

Mac Pro 1.1 won't restart from boot HD or install DVD

I have a MacPro 1.1 quad which won't finish the restart sequence from Boot HD or the Install DVD. I also can't get the DVD to boot to anything but hardware test (D key), which I ran and passed. After reading lots of posts about similar problems, I was pretty sure that it is my ATI Radeon 1900 card gone bad killing the restart right after the Grey apple screen. Then, while trying everything I could think of and finally getting the OPTION key restart to get the Startup Manager, I noticed my old boot camp partition (VISTA) that I had played around with, but never used much. After several failed attempts to get the install DVD to boot, I tried the boot camp partition and to my amazement, after a pause, windows started up. (That's actually how I'm writing this now.)
I ran some tests on the graphics card from windows and it appears to be running fine, albeit a little hot. So now the question: Can the graphics card still be the culprit when it performs ok on the Windows side?
Windows also says that the OSX boot partition of the same drive that boot camp is on can't be read (using MacDrive). But a Seagate HDD diag tool checked the drive and found no errors. I guess that could be part of my problem, but then why wouldn't it boot from the install DVD or in safe mode. I even tried putting the install DVD in my macbook and booting from there in Target mode, with no luck. Also, my install DVD is the original Leopard that came with the machine, but I had upgraded to 10.6.8 later. Would that cause the DVD not to work as a boot disc? I just want to get to the Disk Utility so I can reinstall.
Any knowledge or help would be so appreciated!
Thanks

I have a Mac Pro 1.1 and recently starting having issues. I was running out of drive space for my Vista drive I use Bootcamp. I decided to reinstall Vista on a bigger drive. I went through the normal procedure and had a **** of time installing Vista until I removed the main Lion SSD. Lion has Windows 7 drivers only. So I wanted to reinstall Snow Leopard on a blank drive and get those drivers.
Mac Pro will not read or mount the SL installation DVD. It mounted once and could barely read anything but at a slow rate. I cleaned the disk, but after that despite holding down not the C and D keys at boot up and using Option at boot up the SL kept getting spitted out. Tonight I took it apart and cleaned it with compressed air and vacuum cleaner. I popped the DVD again and it spit it out. I put a DVD movie and it mounted fine. I'm ripping it as we speak. I've done this before just want to see why it won't read SL.
Considered buying an external DVD write for $39 to see if I can get around this issue. Will post back on results. Otherwise this 2007 Mac Pro has been rock solid since then.

Wiped macbook pro will not boot from install DVD

I recently purchased an older MacBook Pro that came with the OS system wiped but it did have the original Install DVDs. The computer will not boot from the DVD. I have booted holding down the C key and nothing happens. I have booted holding down the Option key and it shows the Install DVD and I select this and nothing happens.
How do I get it to open up the Utilities from the DVD to install the operating system?

It could be a problem with the optical drive, but also may be due to the DVD's being for a different model.
Exactly which MBP do you have, and what serial numbers are on the discs ?.

Mac Pro Early 2008 will not boot off Win7 Install DVD

Hello,
I am hoping someone out there will have encountered something similar and have some suggestions or ideas, because at this point I can't think of anything else to try.
I have a 2.8 Ghz 8-core Mac Pro (Early 2008) with an Nvidia 8800GT Graphics card. I am running OS 10.6.2, fully patched and updated.
I am attempting to install Windows 7 Ultimate via Boot Camp, and am encountering a rather odd problem.
Once I have launched Boot Camp Assistant it allows me to partition the drive and does so correctly, but when it attempts to reboot off the Windows 7 installation DVD, I encounter a blank grey-white screen similar to that which you normally get on startup but without the Apple logo. This continues for some time (it seems to vary), and then the screen goes dark and the monitor says it is receiving no signal. The fans on the Mac Pro go for a while, then it goes to sleep. I've tried leaving it for a couple hours, no dice.
I've tried both the 32-bit and 64-bit Windows install disks. I had the release candidate for Windows 7 installed previously, and it worked perfectly. I have since tried that same install DVD that I used to install the release candidate, and it encounters the exact same issue. Booting up off the Snow Leopard Install DVD works fine.
I tried doing a clean install of Snow Leopard on a spare drive, booting off that, and then starting from square 1 using Boot Camp Assistant to re-partition that same drive. Same problem. No matter what I do or try, my Mac Pro does not want to boot off this install disc. I have yet to try the disc in another machine to see if it works there, and I will as soon as I can, but the fact that the RC disc worked a few months back and now will not seems to rule out the boot discs as defective. I've also tried both my internal optical drives with no change, and no other discs have any issues.
I've already spent an hour and a half talking to Apple Technical Support, and they seemed stumped, so I'm hoping someone will have a notion. If not, I understand and appreciate you taking the time to read this- I have no idea at this point, and I'm generally a pretty knowledgeable user.
- Andrew

Thank you for your reply,
Pull all the drives you have other than the one that you will install Windows 7 to.
I think I will try this next.
Don't put Windows 7 on the same drive as OS X, give it its own.
That was initially what I started out doing.
And you don't even need Boot Camp Assistant.
True, but it's what Apple suggests using.
Might also want to try moving the monitor cable to the other card port.
Hmm, I think I'll try that.
Any other PCI cards or devices attached or installed should also be questioned or disconnected.
I've disconnected everything I could.
Always a good idea to start fresh which I assume you are doing (not trying to upgrade over RC etc).
Yes, the drive was empty to start with.
Honestly it seems like the Mac Pro is generally refusing to boot from any Windows disc. Things I've tried since my initial post:
- Loaded Windows 7 Install disc into my room mate's windows PC... loaded up fine, got to install screen
- Tried his OEM copy of Windows Vista 32-bit, same issue
At this point it seems like maybe some kind of firmware issue or some kind or graphics driver issue, but I'm pretty much grasping at straws at this point. It doesn't seem like it's even getting to the point where hard drives or anything matters.
It does recognize that I have a Windows 7 install disc inserted when I use the boot selector/startup disk chooser.
Thanks for the ideas, I'll try those out and see if any of them help,
-Andrew

Can't install from application install dvd and i can't update to 10.6.8 after i restore my macbook pro from mountain lion

can't install from application install dvd and i can't update to 10.6.8 after i restore my macbook pro from mountain lion. when restart and i press command it still has recovery mountain lion show on my screen.

What model is the MBP? Did it come with OS 10.6 or a later OS? Is the install DVD one that came with it or something else?
You can't run an OS older than Mac on it.
But if came with 10.6 installed & you have the system discs, you should be able to erase the drive & reinstall the original OS.

Any install DVD for X-fi Elite pro with Win 7 ?

hello all of you, i wonder if there will be an install dvd for?X-fi Elite Pro on Win?7? and if so , where can i download it, is there an?other solution for the installation, instead of the Vista install dvd
Thanks for your help?

I've since run a few more tests and have confirmed that my X-Fi is the hardware that is making my system lockup. I disabled it in the device manager and was able to play games all day with no problems, but with no sound of course. I also tried uninstalling all software related to the X-Fi and uninstalling the drivers, removing the card, restarting then reinstalling the hardware software and drivers. But the problem starts again while listening to music, playing games, or even watching video online or of my hard disk.
CB

I have my new HD in a USB enclosure connected to my MacBook Pro and I want to put a fresh copy of Mountain Lion on it. But I do not have an install DVD as I got ML as a download from the App Store. What do I do?

I have my new HD in a USB enclosure connected to my MacBook Pro and I want to put a fresh copy of Mountain Lion on it. I'm told that I need to boot from the Installation Disk to start. But I do not have an install DVD as I got ML as a download from the App Store. Can I download ML from the App Store again, but this time directly to my new HD?

Create a data recovery/undelete external boot drive
You can also use Carbon Copy Cloner to clone your present setup to it and boot from it.
Most commonly used backup methods
However, SOME external enclosures are not bootable, you will soon find out.

I have just purchased the new macbook pro 15" and see that it comes with 2 discs in the box, one being Mac OS X and the other being Applications Install DVD. Are these pre installed? or do I need to insert the discs and install them?

I have just purchased the new macbook pro 15" and see that it comes with 2 discs in the box, one being Mac OS X and the other being Applications Install DVD. Are these pre installed? or do I need to insert the discs and install them?

All has been installed. Those are there in case you need to do a reinstall. Unlike most Windows based hardware vendors these days. Apple still ships software you might need in case a drive fails. Even in the case of the new MacBook Air, Apple ships the software on a flash drive.

Re-installing DVD Pro

Similar Messages

Maybe you are looking for