Re-installing from tiger DVD onto leopard?

hello,
garageband came pre-installed on my macbook with tiger. i've since upgraded to leopard. now i want to do a clean (re-)install of leopard.
after re-installing leopard, can i insert the "additional software" DVD that came with tiger, to re-install garageband? would there be any compatibility issue?
thanks.

No, that should be fine.
However, a Leopard installation should leave GB unchanged, so if you don't have a specific reason to re-install GB, why would you do it?

Similar Messages

Installing from Tiger to Snow Leopard using only external monitor?

Backstory: I currently have a mac book pro which i procured from a friend after he dropped it and broke the screen. He promptly went to the apple store and bought a new one and had them swap the hard drives. After hearing this I told him he could most likely still use the old one with an external monitor even if the screen was broken. I hooked up an external monitor myself and what do you know the Tiger set up screen came up and i proceeded to set up this mac book pro for use.
The issue:
I now wish to upgrade this laptop to snow leopard or to leopard than snow leopard. The problem being when I insert the Snow Leopard disc into the drive and click install os when the computer reboots and reaches the set up screen it uses the second monitor as an extended desktop, not as a duplicate.
This means i cannot see the install screens and therefore cannot upgrade.
The F7 shortcut seems to do nothing which is sad because it worked in the initial setup of tiger.
Does anyone know a workaround so I can duplicate the screens? Why would this not be the default behavior? What is the point of extending the desktop DURING setup?
Also it seems some people are reporting problems with external monitors not being properly recognized once 10.6.3 is installed. Is there certain external monitors which avoid this?

You could boot the laptop in target mode and install the OS from another computer onto the laptop drive.

Trying a G4 Install from Tiger DVD...oops...no DVD drive!!

I bought a cheap used g4 single processor (1.33) to use only for the NAT/VPN/DHCP/DNS/Firewall (all the Gateway stuff). I have a dual 2.3 G5 for the APF, OD and other big stuff. G4 came with Jag. I bought a copy of Tiger 10 user on ebay. Came. Looks good.
Well I didn't notice that the G4 only has the CD drive and of course Tiger comes on a DVD so that install went real good. What are my options here? Install a DVD drive? (Recommend a supplier please). Will Apple get me a CD version on the same SN somehow? Burn several CD's in some fashion from the DVD that can then feed the G4? (Care to tell me how to do that?) Plug in a firewire DVD drive? (will it boot from there?). I hadn't expected this problem and I don't see anything posted on how to fix it. Many thanks in advance....

Wes-
I think you have a couple of options.
First is to install an internal DVD drive in place of the CD drive.That is a fairly simple procedure for a guy like yourself. I do not know exactly which model is compatible, but a place like OWC or other reseller will have what you need. I have succesfully done this myself.
Second is to use an extenal FW drive. The model really shouldn't matter, but maybe you could find out more in the G4 forums. I am pretty sure that even if it won't boot from the external drive initially, you can boot up the G4 and select that drive as the boot drive and then restart. I am a little shakey on that one though.
Third is to use the server (almost forgot about that thing) to install the software over the network onto the G4. I know, another thing to figure out, but my guess is that it will be a fairly simple thing to do. You could just set up a mini-network and do it that way.
Luck-
-DaddyPaycheck

Installing apps ONLY from Tiger disc onto Leopard system

Hi- I recently installed leopard. For the sake of brevity Ill just say I didnt do an exemplory job copying my apps beforehand. That said; I was under the impression I could custom install certain apps that were on my old Tiger install disc that are not on the new Leopard disc. Is this untrue? I popped the disc in and held down C. now I seem to be trapped in Tiger install mode, and can't seem to be able to restart the computer as normal. I tried quitting the install, but then have to select a startup disc; either Tiger, or I believe 'network startup'. I tried the latter and got a blinking globe and then back to Tiger install.
So
A: Is it possible to do the installs I mentioned? (IE, ilife type apps)
and
B: How do I get out of the installer and back to normalcy without installing the old OS?
Thanks for any help.

ok..I put the leopard disk back in and ran a disk repair and permissions repair with it. After that it said everything appears to be ok. I still could not get back to my computer so out of frustration I decided to just do an erase and install of leopard once again. Maybe this is a dumb thing to do? Because I did this...the install finished, the computer restarted, and then stayed stuck on the grey screen with apple logo and spinning icon for a long time, after which it went to a sort of grey blue, and after that black. No darwin, just black. What is going on? Should I just go back and do an erase and install with the Tiger that originally came with my computer? Im scared it's a hardware issue.
Thanks for the help.

How to install from Tiger DVD on Lombard with CD drive

I've installed Jaguar on a G3 Powerbook Lombard, and downloaded XPostFacto 4. I want to install Tiger, but I only have the DVD version, and there is only a CD drive in the computer. Can I install Tiger from a networked DVD drive, or is there another option?
tim

There has been at least one report of success using an external USB 1.1 DVD drive to start up the Mac OS X 10.4 DVD on a clamshell iBook
Okay, it seems that the DVD will boot from a USB DVD drive after setting the Boot Disk to the USB drive.
However, running XPostFacto returns a "XPostFacto does not work with this model: Powerbook 1,1" (1,1 referring to Lombard). I've also searched around the XPF forums with little luck. Tiger will also not natively install on a Lombard, but I found this article that details a OSInstall.dist code change to allow Tiger to install.
http://jonsharp.net/archives/2005/05/06/installing-tiger-on-lombard
I may try this later, and post back with results. For now, I'll be running 10.2.
tim

Upgrade from Tiger to Snow Leopard with retail DVD.

Apologies if this has been posted before, but I've not been able to find it when searching.
I'm going to be upgrading an iMac from Tiger to Snow Leopard, using the retail DVD. When I boot from it, it only gives me the option to install, and there's no indication that it will be upgrading rather than installing a new copy.
Can you upgrade Tiger to Snow Leopard with this DVD or would I have to do a clean install? If I can upgrade, is it normal that it isn't telling me it's going to do an upgrade?
Thanks all.

The Snow Leopard installer is somewhat optimized for updating an existing system: it uses data gathered from the old system to decide what to install, its network settings to attempt to access an Apple database of incompatible apps to supplement the list on the DVD, & other useful things.
It even does the equivalent of Disk Utility's verify disk step before writing anything to the HD & does the actual upgrade as root user, making permissions issues a moot point.
There is no reason to hesitate to use it in this way. It is greatly improved compared to earlier OS installers.

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Mach

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

http://support.apple.com/kb/TS2986

TS1394 Can't re-install Leopard. Trying to reinstall the OS because computer locks up. It is a 2008 iMac that came with Leopard. Upgraded to Snow Leopard. Tried to archive and install from original DVD that came with iMac. Installation failed, so tri

Computer locks up, so I want to reinstall the OS. I had upgraded to Snow Leopard.
Tried to do an archive and install from the DVD that came with the computer, but that failed.
Tried to do an erase and install, but the install stops somewhere near the end, 13 minutes to go. Tried several times, same result.
Can't reboot from the install disk, it just ejects the disk and I get the flashing question mark.
Any suggestions will be appreciated.

I think my hard drive is toast. When I boot in single user mode, I get the following text:
CSRHID Transition Driver: start booting in single user... will wait for window server
Then the following text appears, repeating itself over and over, except that the numbers (indicated by "xxxxxxx")
SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
disk1s3: I/O error.
0[level 3] [READUID 0] [Facility com.apple.system.fs] [ErrType IO] [Err No 51] [IDType READ] [PB1kNum xxxxxxxxx] [LB1kNum 0] [FSLogMsgID xxxxxxx] [FSLogMsgOrder First]
0[Level 3] [READUID 0] [Facility com.apple.system.fs] [FSLogMsgID xxxxxxxxxx] [FSLogMsgOrder Last]
These messages keep repeating with the numbers (xxxxxxxxx) changing with each iteration.
Does this indicate a bad hard drive?
Thanks.

Upgraded from TIGER to SNOW LEOPARD

Hello,
How can I uprade from TIGER to SNOW LEOPARD? Do I simply use the upgrade snow leopard to do so? Will that create any instability or issues?
thank you very much.
Alex

Yes, you can upgrade from Tiger to Snow by purchasing the SL DVD. Doing so would only create stability problems if you already have problems, so you should be sure you have a clean system before upgrading. See the following:
System Upgrade and Installation Procedure
Basic Caveats
1. Disconnect all peripherals except the original mouse and keyboard.
2. Quit all applications if this is not an installation from an Installer DVD.
3. The installation process should not be interrupted. If a power outage or other interruption occurs during installation you may have to erase the hard drive and reinstall from scratch.
4. Once the installation begins do not use the computer in any way except to reply to dialog prompts or to restart when the installation is completed. This is especially critical during the installation stage known as "Optimizing the System."
System Update Procedure
A. Repair hard drive and permissions.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.1 for Leopard) and/or TechTool Pro (4.6.2 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. Note that Disk Warrior will not work on Intel Macs.
B. Clone your existing system to an external Firewire drive.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the startup or source volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Drag the startup or source volume to the Source entry field.
5. Select the backup or destination volume from the leftside list and drag it to the Destination entry field.
6. Check the box to Erase Destination. Skip this step if you've already formatted the drive.
7. Double-check you got it right, then click on the Restore button.
C. Decide upon an installation option (This does not apply to Snow Leopard.)
You have three upgrade options. If you use the Upgrade installation option be sure you have repaired the hard drive and permissions first and made your backup. If you choose the Archive and Install option then you only need to repair the hard drive.
Neither of the above options will erase the disk. Some of your software may not work with a new system. You will need to upgrade those programs. It would be best to do the upgrades to your software before upgrading to the new system version.
Personally, I would erase the hard drive and do a fresh install of Snow Leopard then use Migration Assistant to migrate your old Home folder from the backup. This may take some extra time but is less likely to have problems that may be the result of an upgrade installation.

I am upgrading from Tiger to Snow Leopard. I keep getting an error when I try to load the Mac Os x update combined. It says that it was corrupted during download. Have try loading from Apple website V10.6.7 upgrade combined but it still won't do it?

I have an Intel Desktop iMac and I am upgrading from Tiger to Snow Leopard. I keep getting an error when it tries to load the Mac OS X update combined. It says that it was corrupted during download. Have try loading from Apple website Mac OS X V10.6.7 upgrade combined but it still won't do it? Any other suggestions. The printer is not working either - I am not sure if they are connected. Everything else is fine.

Please excuse, but I have to ask an obvious question: Did you already update using the Snow Leopard Retail install DVD? (You must do this first; 10.6.7 is just an update if you already have 10.6.) Are you, then, trying to update from whatever version was on the install DVD to 10.6.7?
Otherwise, I'd keep trying. The 10.6.7 Combo is a huge update.

Safe To Upgrade From Tiger To Snow Leopard?

Is it safe to upgrade a Mac from Tiger straight to Snow Leopard, therefore bypassing Leopard?
If you're running Tiger on your Mac, can you insert the Snow Leopard Install DVD and run it as normal, and the upgrade will go fine?

Hi Reuben
I think other folk have covered the potential 'gotcha' of data loss by suggesting you do a back up first. I went from Tiger to Snow Leopard directly by way of the family boxed set on both a MacBook and an older Mac Mini. Of course there is no "Time Machine" app on Tiger so back up consisted of copying all personal data to an external drive and copying it back after completing the OS upgrade by installing from the DVD. I didn't attempt to update AND keep any data, the thought of a nice, clean, new installation was irresistable.
The only issue I've had since the upgrade has been a minor niggle, which is that while I can use the 'sudo' command when logged in as the main administrator, additional users, even if they are assigned "administrator privileges", cannot use 'sudo'. Maybe I should look for answers to this elsewhere. It may not even be related to the Tiger -> Snow Leopard upgrade.
Go for it :-)

What problems are associated with an upgrade from Tiger to Snow Leopard?

Hi folks.
Is it possible to upgrade directly from Tiger to Snow Leopard, without having to buy Leopard? I've seen many answers around the web, many of them conflicting. There appear to be possible associated problems if you bypass Leopard. But as I'm not certain that what I read is correct I thought I'd come straight to the Community and ask.
Thanks in advance.
(Only reason I'm asking is I persuaded my mother to buy her first Mac (second hand) and it has Tiger loaded onto it. I'd like her to have a more up to date software.)

The computer has to be an Intel Mac.
The basic requirements for Snow Leopard are as follows:
An Apple computer with an Intel Processor
1GB of Memory (RAM)
5GB of hard drive space (Storage)
DVD drive for installation
You can go directly from Tiger to Snow.
Possible problems: make sure the current third party Tiger apps will be compatible. 1 GB RAM is bare bones. You want more than that.
Before upgrading make sure you have the current Mac configuration backed up completely. Use a cloning program like Carbon Copy Cloner to make a bootable clone on an external drive.
http://www.bombich.com/
Message was edited by: WZZZ

Upgraded from Tiger to Snow Leopard - now have problems with basic apps?

I have a 2007 iMac (5.1, 2007) dual core. It's capable of running Snow Leopard and Lion (but not, I believe ML).
I just bought the upgrade SL discs from Apple and installed them as an upgrade, moving up to 10.6.3 (from the discs). After running software update I'm now on 10.6.8.
Since upgrading I've successfully run Time Machine. However I have the following problems:-
A bunch of emails were present in the Inbox, but contained no body text - just the subject line. I have managed to since find most of them successfully from TM. This is a minor annoyance but I thought I'd mention it.
ITunes won't boot up. It booted the first time I tried it, but since then the little icon just bounces up and down.
Certain apps won't quit properly. I quit from the top menu, but the little blue light remains under the icon in the dock. I then have to 'Force Quit - Application Not Responding' *every time*.
Safari frequently won't load up bookmarked or seach pages, the progress bar gets stuck part way across and I stare at the rainbow pinwheel for ages, before having to quit, then Force Quit, then restart Safari and try again.
Now, I'm tempted to do a Clean Install, but after four international moves (Singapore-Australia-UK-Canada) I no longer have any of the original discs, and thus as I understand it will lose iLife. And iLife 11 needs Lion.
I've done a disc permissions repair thing via the Mac Disc Utility. I've run a few clean-up operations via Onyx.
Any suggestions gratefully received. My Mac as been running great for years, but this upgrade has been extremely disappointing thus far.
thanks
Feargus

Hi baltwo
Many thanks for your advice. I've read all the links and will be buying a 2nd external HD to do a SuperDuper back up. I already had a 1Tb drive with Maxtor back up on it, and I also managed to get a Time Machine back up as well, so at least my data should be safe.
Qn - If I back up the System and Utility folders as well as the Home folder, I don't suppose I can restore them after an install and everything (eg iLife) will 'just work'?
Anyway, I went straight from Tiger to Snow Leopard. I don't have any Tiger discs either (see reasons above) so now have no way of restoring original set up. I tried to boot from the SL install CD and then hold 'C' but must be getting something wrong as I don't get the Disk Utility pop up. It just boots as normal to the desktop.
Anyway, via the normal Disc Utitlity I've done a Repair Permissions again with no major issues. However, my Onyx software now won't run at all so I can't clean any caches a second time.
I've contacted the Apple rep who sold be the SL discs but she's not got back to me yet re iLife.
This weekend I'm going to try a fresh upgrade. If that fails I'll try Erase and Install, if I can get the 'C' button timing right. I'll update if I have any successs.
cheers
f

Want to upgrade from Tiger to Snow Leopard

I spent over an hour through the apple store web site and cant find a way to upgrade directly from Mac OS 10.4 Tiger to the latest Snow Leopard version.
The Apple web site gives only one purchase possibility : to upgrade from Leopard 10.5 to Snow Leopard 10.6. But how to upgrade from Tiger to Snow Leopard ?

Francois Dormoy wrote:
I spent over an hour through the apple store web site and cant find a way to upgrade directly from Mac OS 10.4 Tiger to the latest Snow Leopard version.
The Apple web site gives only one purchase possibility : to upgrade from Leopard 10.5 to Snow Leopard 10.6. But how to upgrade from Tiger to Snow Leopard ?
this has been oft asked and answered. you can buy a Macbox set which will give you snow leopard, ilife and and iwork. or you can buy a $29 standalong snow leoaprd dvd although there is a big disagreement on the board whether using it to go from tiger to snow leopard directly violates ULA (I think it does). but the actual disk is the same as in the macbox set and either one will upgrade you to SL.

I want to upgrade from Tiger to Snow Leopard...I'm apprehensive about Lion.

I've been hearing so many "glitch" anecdotes about Lion. Until these problems are resolved
I want to upgrade from Tiger to Snow Leopard but I'll be buying a new Apple computer to
do that..
I presently have a a 10.4 iMAC with only 2.33 GB of memory and I'm getting a new puter
in order to have 4 GB. Is it recommended to use Lion with a new Apple computer or can I use
Snow Leopard without missing out on anything? Are the stories about Lion just the usual thing
that always happens with a new upgrade? Tiger has worked perfectly for me for 6 years but that
has been on computer that is 6 years old. (POWERPC) Does a new iMAC computer with intel
require the latest operating system to work at top efficiency? Is my apprehension about Lion
an over reaction to anecdotal info?

Some of this is answered best by knowing what model computers are involved. If you are truly getting a brand new (as opposed to a newer used) computer then it will likely come with Lion installed, unless there's some old stock (which even then would have Lion installed but could still run under Snow Leopard which you would have to buy separately). Macs will normally only run the version system that comes installed, or newer, so if you are getting a brand new Mac you won't have any choice but to run Lion (or its successors). It won't run Snow Leopard unless it is a new used computer.
As for Lion stories, those would best be answered on the Lion forum. I still run Tiger which I why I'm on this forum. There's always issues with any upgrade. For me the biggest drawback to Lion is all my software is PPC generation and Lion stopped supporting PPC completely. If I got a brand new computer I would also have to upgrade all my software which could easily run to over a thousand dollars more.

Re-installing from tiger DVD onto leopard?

Similar Messages

Maybe you are looking for