Re-installing included appps after update

Can I restore the applications that came on my powerbook, Art Directors Toolkit, Graphic Converter, Omni Graph/Outliner etc..., from the 10.3.x restore disk after updating to 10.4?
Thanks,
David

Seems like a good time to clean house. I've been heavily using this powerbook for almost 2 years now (about 6 to 10 hours a day). Disk is about half full, lots of applications and files. This system has been unusually reliable. In all this time I've had two system hangs and I've run as long as 3 months without re-starting. But, just recently, I've run into a couple minor bugs. Since the last updates, iTunes, Safari, and Quicktime, my airport no longer auto connects at home. There have been a few other minor issues. I think stuff adds up after time and once there's a kink the growth becomes exponential. Once there is something, why build on top of it? To tell you the truth I've put it off just because I have so many files and applications that will need to be migrated and re-installed (many passwords and serial numbers). The thousands of e-mails have me a bit worried too. I have two back-ups on two separate external drives, so I'm set in that area. Doing my research now.

Similar Messages

Unable to install any addons after updating to Firefox 7.0.1

I am not able to install any addons after updating to firefox 7.0.1. Addons are still working. Addons will start to download but will get stuck at 100% download progress.

What addons do you already have installed? Could be one of them is interfering with the downloads somehow...

Cannot install Touch ID after update 8.1.3 in iPhone 5s.

Cannot install Touch ID after update 8.1.3 in iPhone 5s. In trying to install unlocking my phone is refused, as is allowing access to iTunes and App Store. Before updating I used Touch ID without any problem.

Restore iPhone with iTunes on computer. If after the computer Restore there are still problems, iPhone 5S has Warranty, make Genius reservation or set up service and take or send iPhone to Apple for resolution.

DC7700 can't detect and install sound card after update to Windows 7

I've been trying to get the sound on my HP DC7700 Ultra Slim desktops to work for a few months now (I'm a teacher at a high school, so I have about 100+ of them to take care of). I've upgraded them from XP to Windows 7, and the computers no longer recognize the sound card.
I have tried installing the Realtek driver from their site and HP's, I've tried updating the UAA architecture as suggested in other posts here and here.
In device manager, all hardware has been detected and correct drivers have been installed, including PCI and chipset drivers.
Randomly, ONE DC7700 with a unique hard drive worked. I painstakingly checked every single driver installed and found the two that were different:
"Realtek High Definition Audio" under "Sound, video and game controllers"
"High Definition Audio Controller" under "System devices"
Pictures of the driver details for both are posted below.
I am completely at a loss as to how to accomplish this successfully, and I appreciate any help. Our school is depressingly poor, and without sound videos are completely useless to them.
Thank you in advance for your time,
Kris Brackebusch

Hi, Kris:
Try reinstalling W7 on one of them that doesn't have audio.
On that model, W7 should be installing a generic HD audio driver that works and then you can install the Realtek HD audio driver either from the dc7700 support page or the latest one from Realtek.
You do not need the MS UAA Bus driver, because that is only for XP.
UAA is included native to Vista and newer versions of Windows.
I do not recommend you install it in an effort to resolve the issue.
I have worked on dc7600's dc7700's and the newer Elite 8xxx models, which all have the Realtek HD audio chip.
Never had a problem getting the sound to work right from the upgrade.
The HD audio is the driver that Windows installs natively.
The Realtek HD audio driver is from Realtek.

Java no longer installed in chrome after updating

After the latest update to JAVA, (update 10, OS X 10.5) when I visit a site that uses java, it tells me that java is not installed for my browser(google Chrome). I've tried re-starting the Mac and also re-installing the update to no avail, still getting the message that java is not installed. I need java functionality and the chrome browser is the most responive and user friendly that I have tried, suckfari has too much lag, is anyone else having this issue?

re-installing the combo update did not fix the issue, but updating to safari 5.0.5 did improve the performance of safari; though it is still not on par with Chrome for pure download speed, the lag is decreased. Still having the issue with java and chrome. Submitted issue report to chrome to see if they had a possible solution. Thanks again for the help.

Unable to install any applications after updating ...

Hi guys!
I updating software my mobile n78 to version date 10-3-2009
custom version
21.002.051.1
custom version date
18-02.2009
After that if I try to install any application the mobile is say the file is corrupted
I need to help
Solved!
Go to Solution.

thanks for help me

Unable to install on N8 after update

Hello everyone,i have a problem,please help,i update my N8 software to symbian Anna,since update i can't install anything on my phone,that includes the applications from ovi store,so please a little help,thank you !!!
Solved!
Go to Solution.

@marioshik
Can you install simple application such as this which does not require Ovi Suite/Ovi Store?
http://www.smartphoneware.com/screen_snap-for-symbian3-product.php
Happy to have helped forum with a Support Ratio = 42.5

Unable to install IWork'09 after update

Thank you all in advance. Any advise will be helpful.
This topic has been covered before, but following the instructions did not solve my problem.
I had Snow Leopard in my macbook pro, then after I broke the hard disk took it to repair at apple assistance and got a machine updated to mountain lion.
TIn snow leopard I had iWork installed from a trial version (downloaded from web site apple) with purchased serial number.
I downloaded the update (for my version) and pages stated acting weird.
I uninstalled everything, wanting to start from scratch but Numbers and Keynote would work while Pages would give me an error message.
Now, I followed some of the tutorials on the forum and deleted all playlists, receipts, .pkg etc related to the program, and deleted (again) iWork.
Now, the message is… unable to install, contact.. bla bla.
In the mean time I bought a new macbook pro (13") that came with mountain lion installed.
I have uses the same .dmg iWork trial version, added the serial number and it works fine.
So, it seems to me like there is no problem with the .dmg file or the serial number with mountain lion,
Just with the updated version on the old machine.
Can you help me?

@marioshik
Can you install simple application such as this which does not require Ovi Suite/Ovi Store?
http://www.smartphoneware.com/screen_snap-for-symbian3-product.php
Happy to have helped forum with a Support Ratio = 42.5

Can I always repair permissions from the install disc, even after updates?

Does anyone know if I can always repair permissions properly from my original install disc that came with my iMac thats 10.4.1. I now am 10.4.3 and was wondering if things change with every update rendering the install disc out of date for permission repair.
I read some where on the internet that after you update from the original OS you should just use disc utility. I know nothing about this sort of thing, any help on this and the types of utilities I might need would be greatly appreciated.

Maybe this is dumb, but what do you mean by don't believe the hype on permissions repair.
are you talking about the posting I read about not being able to continuously update and boot from the original OS disks, or that repairing permissions is overated as far as system maintanence.
I get a lot of conflicting advise on system maintanence. Thats why I ask this. I'm fairly new to macs and how to keep them going problem free.
by the way,...
thanks for the replies guys
Yes, he can do the same with overkill third-party
utilities that aren't on a bootable disc for which
he's already paid. (And is Disk Utility so hard to
use that we need third-party utilies with this
function?)
Hmm. What if he specifically needs a bootable disc
that can repair permissions? Can't assume his
specific needs and environment when he hasn't
detailed them.
Bryan:
Don
't believe the hype about running permissions
repair.

I can't install any app after updating my iphone5s to 7.0.6

I need help from all of you. What should I do to be able to install the apps on my iphone5s. I just have this problem after udating my iphone to iOS 7.0.6.
Thank you everyone.
Dara

Having the same problem. Go to settings - messages and turn off iMessage. Hearing that many are having problems with this.

Mac App store won't install on dock after update to 10.6.8

Hi All
I am running OSX 10.6.8 and have tried numerous times to get the App store icon to install...I am at the point of pulling my hair out, I'm so frustrated. I've installed the 10.6.8 update combo....
I've got 2.4GHz Intel Core i5, and 4GB macbook pro
I want to be able to upgrade to Lion, but of course need the App Store icon to get it!
Any help will be great!
Thanks!

Thanks Matthew,
Its not in the Applications folder, and all I have on the Apple Menu is;
About this Mac
Software Update
Mac OS X Software
System Pref, dock etc
I don't have the App Store in the Apple Menu at all..
Any other suggestions?

Distribution returns "No software will be installed or removed" after update

I've made changes to my application and created a new distribution. When the new distribution file is run I get the following message.
I've even forced the version number up to 2.0.0 and I get the same message.

I would like to add an update, in case anybody finds this useful.
The software was being installed on a Windows 7 32-bit machine, with "Chinese' language settings.
One or both of 2 issues were involved: Windows uninstall leaves "traces" of the application lying around, which made the LabWindows/CVI installer think that the software was already on the machine. Also, there is a known issue with the LabWindows/CVI 2010 installer, and non-English settings.
The fix, finally, was to install the Windows 7 64-bit English operating system, and everything was fine from there.
What finally fixed it was moving from Chinese to English, OR moving from 32-bit to 64-bit, OR just a fresh operating system installed. Any way, it now works.

10.4.11 to Leopard install-reinstall software after update(NO TIME MACHINE)

dumb question but I'm mid project and need OSX 10.5 to run a necessary plug in . I don't want to reinstall FCS2 as I only have FCS1 discs here. I don't have Time Machine either. Can I just install 10.5 without reinstalling software? Thanks

nadsta wrote:
Yes I'm on Tiger and what to upgrade to Leopard, and simply want to know if Leopard will require me to reinstall my currently installed apps, particularly Final Cut Pro Studio (FCS). I want to avoid this as I don't have the discs here for the version I have installed and am using (FCS2), I only have FCS1. I can't access the FCS2 discs til late next week and have to deliver a project before then which requires a plug in which will only run on 10.5.3
Ah, now I see.
No, if you do an Archive and Install of Leopard, it will put your Tiger system into a Previous System folder, load Leopard & the new Apple Leopard apps, then migrate everything it can from the Previous System folder.
Some apps and/or some user data might not migrate, for one reason or another, but they'll remain in Previous System.
I can't tell you about FCS, but as long as it's compatible with Leopard, it should come over fine.
Of course, first backup your entire system, "just in case".
Then be sure to do an Archive and Install, not an Erase and Install.

Sim card not installed comes up after updating

i updated my phone and now its nt starting and when i connect it to itunes it says that the sim card is nt installed

But I tried other international sim and it still showed same msg. I believe it's not problem with the sim. any issue with latest software upgrade?

All games do not start after update to 10.10

Hello,
I updated yesterday to Yosemite and since then all games, that I bought in AppStore (XCOM, Tropico) do not launch. I bought and installed XCOM Bureau after updating to Yosemite - but it doesn't start either. In requirements stays "OSX 10.9 or higher" - so, it should work, but...
Any ideas?
Thanks!

If the version is correct under "About this Mac" it's uneccessary to apply the combo update again. In most cases it doesn't help solving issues like that. I chat several hours with the Apple support and find the problem after digging deep into the KB.
The problem in my case was a corrupt IMAP account. I disable my mail accounts one by one by unchecking "Mail" in the System Preferences settings and try to start Mail. Don't forget to enable the account again before disabling the next one. That point us to the corrupt mail account. What I do next is to delete the corrupt account and create a new one. In my case without data loss because of IMAP.
What I do before (without solving my issue):
Reboot in safe mode and starting Mail
Clear NVRAM
Remove all Mail plugins by deleting the content of ~/Library/Mail/Bundles and /Library/Mail/Bundles
Hope that helps.
Thomas
P.S. Thanks to the guys from Apple support who gives me first class guidance to solve this problem.

Re-installing included appps after update

Similar Messages

Maybe you are looking for