Re installing old software

I'm looking to reinstall CS5 Premium Suite on a new computer and I'm having trouble getting it to start. I've downloaded the first file from the Adobe site as instructed but when I try to run the programme it says "Please wait while downloaded files are being extracted". I left it for over an hour and 0% progress was made. Has anyone else had this problem? Are there any solutions available?

Without proper system info nobody can tell anything. Extraction errors usually mean that the required temp folders are inaccessible or simply full, but you would have to be a lot more specific about that...
Mylenium

Similar Messages

Installing old software from previous Windows 8 installation? And installing new software.

Hello.
Two questions.
Can I re-install software from my previous Windows 8 installation onto Windows 10 Preview? All the files needed are in Windows.old. I have some software that was registered to me, and getting another copy will be kinda hard.
Also, when the final edition (i.e: not a technical preview) comes out, will any new software that I have installed onto the Technical Preview still be there?
Thanks.

It depends on how you installing Windows 10, if you do custom install or clean install which means either format partition of your current Windows or install Windows and removing previous version of Windows which would create Windows.old, you have to reinstall
your applications and restore your data and you need product keys and installation files. However , if you do upgrade which is possible from Windows 8 to Windows 10, then you will have your programs and files in place and you don't need to reinstall them.
But note like previous upgrades (e.g. Windows 7 to Windows 8), you might have some compatibility problems and you might need to uninstall some programs and install newer version which you will know during upgrade process.
When final version of Windows been released, you might need to update or install latest version of some software or programs which are compatible with Windows 10 and latest software products should work on Windows 10.

Installing old software on a new computer

I have bought a new computer with windows 8, when I try to reinstall old adobe software on the new computer, I manage to install the Akamai installer SW, but then the installation procedure stops. I have tried several times. No success.

Elements 11
I had purchased it several months ago and installed it on a different
computer. Now I have deactivated and uninstalled it on that computer and I
am trying to install it on a new laptop. Every time I try to install it, it
tries to give me the trial version. I have my serial number but cannot
figure out how to re install it.

Installing old software on a new device

I have licenses for Photoshop V10 and Lightroom V3. They both appear in my account under my orders. I want to install them on my new laptop but there are no download links associated with these oreders in my account. Also, I need to deactivate an old device that I no longer have. I tried the Chat help but I didn't get anywhere. Can anyone help?
Thanks!

Please follow the steps below to download PSE10 and Light room 3 :
1. Navigate to Photoshop Elements 11 downloads page : http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
2. Sign in with your Adobe ID
3. Copy and paste the following links on the address bar and hit enter :
Adobe Photoshop Elements 10 English Mac
http://trials3.adobe.com/AdobeProducts/PSE/10/osx10/PhotoshopElements_10_WWEFDJ.dmg
Adobe Photoshop Elements 10 English Windows
http://trials3.adobe.com/AdobeProducts/PSE/10/win32/PhotoshopElements_10_LS15.7z
http://trials3.adobe.com/AdobeProducts/PSE/10/win32/PhotoshopElements_10_LS15.exe
4. Save the files.
5. Run the .exe file if on Windows or .dmg file if on MAC.
To Download Lighroom follow the steps :
1. Navigate to Lightroom 4 Downloads page : https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom
2. Make sure you are signed in with our Adobe ID
3. Copy and paste the following link on the address bar and hit enter :
Adobe Photoshop Lightroom 3 English Mac
http://trials.adobe.com/AdobeProducts/LTRM/3/osx10/Lightroom_3_LS11.dmg
Adobe Photoshop Lightroom 3 English Windows
http://trials.adobe.com/AdobeProducts/LTRM/3/win32/Lightroom_3_LS11.exe
4. Save the file.
5. Run the .exe file if on Windows or .dmg file if on MAC.
If the older device is no longer available, there's no way you can deactivate the software.
But you can contact Customer Care at 8008336687(US) or Adobe Support no. for your region and get the activation count on the license increased by the agent as an exception.

Can I install Snow Leopard over Lion to install old software after hard drive crashed?

My hard drive crashed and I lost everything. I have a new hard drive, but when the repair shop installed my operating system, they installed Lion and I no longer have my prior updates. My computer had been updated a few times. I have a lot of software that only can be installed up to 10.7 such as Adobe Photoshop Elements 10, Office Mac 2011, etc. I was wondering if I installed Snow Leopard over Lion, would I lose Lion? Should I install Snow Leopard and then Lion again? I don't want to damage my like new computer and I don't want to have to go out and buy all new software. Is there a solution? Thanks in advance!

Sounds complicated! If I repartition the drive and install Snow Leopard onto the blank volume, will Lion still be there? Or, will the computer basically have two operating systems that I have to go back and forth from. Is this something a novice like myself can do?

Install old software package

Hi,
I try to install LAPP (Apache Postgres PHP) on ArchLinux for use mysource_martrix CMS. All work fine but mysource_matrix work only with PHP 5.2.x. The last package of PHP in ArchLinux is 5.3.2.
It is possible to install an old package in ArchLinux?
Thanks a lot.
Marco

> pacman -Ss php52
community/php52 5.2.13-3
A high-level scripting language

Should I install old software in my new Mac Pro, then upgrade?

I'm trying to transfer documents and apps from my PowerBook G4 to my new Mac Pro. I used Migration Assistant but it transferred only some files, no applications, no settings, even though I checked all those boxes. I've given up on MA. But here's the question: I have Office 2004, which I'd like to install so I can have Word on my Mac Pro, and then I would upgrade after installation. I've heard that pre-intel software can really slow down your intel computer. But what about starting with that software and then upgrading, so I don't have to pay for an entirely new MS Office? Same with Final Cut Studio. Any ideas about this would be appreciated!

Lubella wrote:
I have Office 2004, which I'd like to install so I can have Word on my Mac Pro, and then I would upgrade after installation.
MS Office 2008 is an upgrade, not an update. It does not replace Office 2004. It is a separate installation. It is like upgrading from Tiger to Leopard except 2008 does not replace 2004 as Leopard replaces Tiger. You purchase the entire 2008 installation like purchasing the Leopard upgrade, but can have 2004 and 2008 running on the same machine without partitioning. I have both installed on my iMac.
I've heard that pre-intel software can really slow down your intel computer. But what about starting with that software and then upgrading, so I don't have to pay for an entirely new MS Office? Same with Final Cut Studio. Any ideas about this would be appreciated!
As far as I know, there is no discounted upgrade price from Office 2004 to 2008. I could not find it on their website anyway. I think to get Office 2008 you need to buy the Office 2008 installation disk.
I think (might be just me) Office 2004 running in Rosetta is slightly faster than the 2008 version. All the applications in 2004 launch faster. In Excel 2008, entries into cells are delayed by a fraction of a second but 2004 has instantaneous entry (perhaps MS in their infinite wisdom thinks the delay is a feature).
I am gradually changing over to 2008 only because it needs to be compatible with other computers in my office. If it weren’t for that, I would have stayed with Office 2004. Anyway, if you are going to buy Office 2008, you can install it and run it side by side with 2004 to see for yourself.
I’ve also seen posts here about MS Office 2008 having problems with the Spaces application of Leopard. If you use the Office Toolbox (formatting palette) it has bizarre behavior when using Spaces.

HT1222 how to install old software

ios 6 for i phone 5

As always, you cannot go back.
As always, you can only update to the latest available.

Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

Download the Brother Mountain Lion drivers here.

How do i install the old software on my mac

how do i install the old software on my mac, i hate Yosemite

Please explain me as in what kind of old software do you intend to install on your macbook pro.
-    Please tell what OS X do you wish to run on your macbook, as you said you hate Yosemite.......??
-    Do you wish to do a clean install of your favoured OS X and later reinstall your old software...??
-    Also, do you want to restore the entire system files means the OS X along with the old software or just want to re install your old software on the existing OS X ...??
Be precise.....

I have an iMac that I am running OSX 10.8.3 on. I keep trying to install 10.8.4 but it will not install. I tried updating and installing several times and it restarts the computer but it will not install the software. My machine is about 8 months old.

I have an iMac that I am running OSX 10.8.3 on. I keep trying to install 10.8.4 but it will not install. I tried updating and installing several times and it restarts the computer but it will not install the software. My machine is about 8 months old so, it's in the newish range. HELP!

Sometimes the App Store version doesn't work correctly. In this case, install 10.8.4 with the Combo version > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US
The Combo installer is the safest way to update OS X, and it allows you to update more than one computer with a single download

I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

Yes, gladly. I am trying to install on a 13" MacBook Pro with OS X 10.8.3. I insert the disk into the SuperDrive. The I work '09 window pops up with two icons: one Tim install and one that says "Read before you install iWork." I double-click on the "Install iWork '09" icon, and a window appears that says, "This package will run a program to determine if the software can be installed." I click "continue" and see "Welcome to the iWork '09 installer." I click on "Continue." The "read me" bullet on the left lights up, and I see "Read before you install. . . ." I click "Continue," then see the software license agreement. When I click on "Continue" again, I am asked to agree, and I do. The window then says, "Standard Install on 'Mackintosh HD" and indicates how much space the program will take.
I click "Install," enter my password, and the installation begins. It goes through a validating phase and begins "writing files." It indicates that installation will take about 30 minutes (although that number fluctuates). After about four minutes it goes to "cleaning up." Then after just a few seconds, the "Summary" bullet on the left lights up and this message appears: "There were errors with the installation. You may want to try installing again." There is a large yellow triangle with an exclamation point in it, and a bold "The installation failed." Below that appears "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
At that point, a "Close" button is pulsating blue at the bottom of the window.
Sorry for the tedious detail. Anything revealing there?
Thanks!

I can't get the CS4 Design Standard to download onto my computer... I just purchased a new MAC and I can't install my old software.

I can't get the CS4 Design Standard to download onto my computer... I just purchased a new MAC and I can't install my old software.

I'm having the same issue. All my applications transferred over. Lightroom is working, but when I went to edit a picture in Photoshop, I got an error message. It told me to restart, but the program still won't open after restart. It says licensing has stopped working, but what does that mean? I can't tell whether it's unsupported/blocked, or if it's a malfunction. The error code is 150:30 See screen shot.

Just bought a Macbook Pro. I want a clean install so won't use a Time Machine backup but how can I install the software I bought from Apple Store? can I just delete it from the old machine that is going to someone else?

Just bought a Macbook Pro. I want a clean install so won't use a Time Machine backup but how can I install the software I bought from Apple Store? can I just delete it from the old machine that is going to someone else?

The ne
The new machine has Mavericks which is fine. And I will leave it as is. I don’t want anything from my old machine other than 2 apps that I will need on the new one. I want to be able to install those apps that I bought from the App Store onto my new computer. I assume Apple doesn’t want me to have the apps installed on 2 machines at the same time so I wonder if just uninstalling them from my old machine will release them for re-install on the new one.

Installing old Office software

If I don't want to upgrade to the new version of Office, can I just transfer the old software from an existing desktop version of Office? Since there is no disc drive I tried to copy the CD's to a bus drive and then install to the 505, but it stop loading about half way.

Hi, i was able to install Office 2003. If you have access to another computer with an optical drive (CD/DVD), put in the office CD and copy all the files onto a flash drive. For Excel+PowerPoint+Word, the total space req'd might be around 250MB. Make sure you copy all the 'Hidden files' as well. This should happen automatically if you copy the whole folder... Plug your flash drive into the netbook and run the setup.exe (or whatever name it is) file. That will do it. You'll need the product key, of course. This is how I did it for my NB505 netbook and it works perfectly. ... I see you mentioned getting it done by Best Buy, in another posting. Hope that worked fine. Best, NN

Re installing old software

Similar Messages

Maybe you are looking for