Re-installing OS issues...

alright, so I may have screwed something up big time, but hopefully someone can help. I got my macbook fall 2007 and am currently still using Tiger as it does what I need it to do. I had a lot of useless things slowing my mac down so I decided to try and restore to factory settings... now it's not working.
I followed this vid: http://www.youtube.com/watch?v=yPmT5Xbb8p0 and did as he said... I restarted, and when I went to install, it asked me which drive to install it all, so I click the icon for my empty HD and it says it's unable to use that drive. Any one have any ideas on how I can undo this hero move?
Thanks

williamfromalpine wrote:
Where I have already tried to re-install snow leopard, and the disk is in the desk top, can I restart and hold d and it will go into the hardware test? Or do I need to get the snow leopard disk out and insert the Mac OS x disk?
Please read the instructions to Apple Hardware Test in my first post and execute a AHT in Extended Mode. To find the instructions click the provided link.

Similar Messages

HP P1102 installing driver issue

Hello,
I have problem with installing of driver for Printer HP LaserJet P1102.
At the end of installing is appeared message: Printer installation failed. Printer was not installed.
After this I tried to install again, and message was:
1. After click close disconnect USB cable from the printer.
2. Turn printer off, and after this turn it on.
3. Connect USB cable to the printer.
I do this but unsuccesfull.
Please help.
I have Windows 7 Ultimate operating system.

Hi @Visla ,
I see that you are having issues installing the printer. I would like to help you out today.
Disconnect the USB cable.
Here are the steps to run the uninstall from the computer or the CD.
To uninstall from program files:
Touch the Windows key and the E key to access the computer window.
Select the C drive.
Select program files or program files x86.
Open the HP and printer name folder.
Select uninstall.
Uninstall the software from the CD:
Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
I would disable all the start up programs and temporarily turn off the Antivirus Software to see if there is a program interfering in the back ground. How to use MSCONFIG . Click on the start up tab and click disable all.
Restart the Print Spooler.
Click Start (), type services.msc in the Start Search box, and then press Enter.
Right-click Print Spooler, and then click Properties.
Under Service status, click Stop and then Start, click OK.
Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the computer.
The USB cable shouldn't be longer then 6 feet. Don't connect the USB cable until prompted.
Download, save and then run the newest drivers or run the CD.
HP LaserJet Pro P1102w Printer Drivers.
Test the printer.
Then you will have to go back and enable the startup programs and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Downloading and installing podcast issues

The podcasts I try to download get to 100% downloaded and then I get a message that the podcast had an error downloading cancel or retry. It's been consistent. Anyone else having these issues?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Installing Driver Issue

Hello;
First of all, english is not my first langue.
I have GT70 Dragon Edition and I decided to update my drivers so I went to;
http://www.msi.com/support/nb/GT70_Dragon_Edition.html#down-driver&Win8%2064
and downloaded drivers. However, I couldn't install Bigfoot LAN and Killer (Bigfoot) LAN.
For installing Killer (Bigfoot) Lan I used cleaning tool and after that I tried to install Killer but it gave error that your hardware doesn't suppor Windows.
In addition, when I try to install Bigfoot LAN (not killer) everytime it says 'an older version of the software found' and says it upgrade but nothing happen.
For this problems, I did what he/she says on here;
https://forum-en.msi.com/index.php?topic=178064.0
However, I don't have Killer Network Maneger anymore and I don't know I did everything correctly, why I couldn't install Killer (Bigfoot) Lan and Bigfoot LAN. Do I worry?

Quote from: mklim;111725
Try if this driver download could help.
https://drp.su/download.htm
MSI provides customized drivers to our users and the third-party's program for the driver update might cause some unknown issues. Thus, we don't suggest our user to use the third-party program for the driver update.

Exchange 2013 CU5 fresh install suffering issues with services not starting and coexistence with 2007

Hi everyone,
Hope you can help me out on a couple of issues I've been experiencing during the initial stages of a project to upgrade an on premise Exchange 2007 to 2013.
On Monday last week I installed the first Exchange 2013 server into the network after a few weeks of careful planning, information gathering and remediation of our current Exchange 2007 environment and associated systems.
The server itself has been having some issues from the word go, some of which I've resolved but none that are show stoppers but I want to get them resolved before building more servers and setting up the planned 2 x 2 node DAG's
The main problems are as follows:
There's usually one service that does not start following an OS restart and it's not always the same service. So far I've seen the following not start: DAG Management, Migration Workflow, Anti-spam Update, Unified Messaging, UM Call Router, Transport
Service.
The critical system event log entries are complaining of timeouts when the services are starting up but I can't imagine that the servers boot time is too long... It's a 2 vCPU/12Gb vRAM VM, Windows 2012 R2
I receive an error in the Event Log regarding RPC over HTTP Proxy
to one of the 2007 CAS servers (not our primary one). The first error was because the Windows Component was missing but since installing it, disabling Outlook Anywhere, reenabling it, restarting the server, I now have a new error which is shown further down
this post
The Exchange 2013 server install is pretty default, CAS/MBX roles and some basic configuration performed such as new DNS entries, Public SSL certs installed and assigned, URL's updates, SCP updated. I have review and resolved some errors from the event logs
for over chatty warnings about disk space (the warning is that we have loads of space...)
This is a brief outline of the environment:
Exchange 2007 SP3 RU13
UK - Two physical locations in a stretch LAN (100Mb WAN)
4 x CCR Cluster Mailbox Servers in two separate CCR Clusters
Cluster 1 - Windows 2003 R2: One physical, one virtual server - don't ask, legacy install and I know the virtual is not a supported configuration.
Cluster 2 - Windows 2008 R2: Two virtuals - New cluster built following a 4 day failure of Cluster 1. The aim was to move to supported config and decommission cluster 1.
Note: Migration of Cluster 1 to Cluster 2 was halted as 2013 was so close it seemed pointless to continue the migration and instead migrate both Clusters to 2013 once in production.
2 x Virtual Windows 2003 R2 - Hub Transport Servers
2 x Virtual Windows 2003 R2 - Client Access Servers
1 x Virtual Windows 2003 R2 - Unified Messaging Server
1 x Virtual Windows 2003 R2 - Edge Transport Server (DMZ)
US - One physical location
1 x Physical Windows 2008 R2 - Mailbox, Client Access, Hub Transport Server
Exchange 2013 CU5
UK - Installed into same site along side Exchange 2007 servers
1 x Virtual Windows 2012 R2 - Mailbox, Client Access Server
Problem 2 Error Message - Please note, server names and domain name changed:
Log Name:      Application
Source:        MSExchange Front End HTTP Proxy
Date:          18/07/2014 10:00:37
Event ID:      3005
Task Category: Core
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      EXC2013.domain.local
Description:
[RpcHttp] Marking ClientAccess 2010 server EXC2007CAS1.domain.local (https://EXC2007CAS1.domain.local/rpc/rpcproxy.dll) as unhealthy due to exception: System.Net.WebException: The underlying connection was closed: The connection was closed unexpectedly.
   at System.Net.HttpWebRequest.GetResponse()
   at Microsoft.Exchange.HttpProxy.ProtocolPingStrategyBase.Ping(Uri url)
Event Xml:
<Event xmlns=http://schemas.microsoft.com/win/2004/08/events/event>
<System>
    <Provider Name="MSExchange Front End HTTP Proxy" />
    <EventID Qualifiers="32768">3005</EventID>
    <Level>3</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-18T09:00:37.000000000Z" />
    <EventRecordID>64832</EventRecordID>
    <Channel>Application</Channel>
    <Computer>EXC2013.domain.local</Computer>
    <Security />
</System>
<EventData>
    <Data>RpcHttp</Data>
    <Data>EXC2007CAS1.domain.local</Data>
    <Data>https://EXC2007CAS1.domain.local/rpc/rpcproxy.dll</Data>
    <Data>System.Net.WebException: The underlying connection was closed: The connection was closed unexpectedly.
   at System.Net.HttpWebRequest.GetResponse()
   at Microsoft.Exchange.HttpProxy.ProtocolPingStrategyBase.Ping(Uri url)</Data>
</EventData>
</Event>

Hi Off2work,
I've gone through the article and the Get-OutlookAnywhere commandlet looks fine (especially when compared with our working CAS).
Having looked through IIS I have spotted two additional misconfigurations with a missing setting to require SSL on the RPC folder and also the .NET version was not set.
I've now set those to Require SSL and .NET 2.0.5072 however this has made no difference following restarted of both 2007 CAS and 2013 servers.
I could potentially reinstall the CAS server or additionally decommission it as we have two of them and the other is not causing any errors with the 2013 server. This broken CAS server doesn't even have DNS records (except it's own hostname) or firewall
rules pointing to it, nor does it have any active client connections if I check with a quick netstat -a
As for UM, it's next on my list following some client/server connectivity testing so I have not yet assigned the SSL to the services or setup the dial plans, etc.
The services do start most of the time, but others then don't so it's not a consistent issue with just this service. On my current boot, the DAG Management service failed to start, but again I don't have a DAG implemented yet.
I will see if UM drops out of that list once I've configured it shortly
Thanks for taking the time to respond (and that goes to DareDevil too)

OSX Mountain Lion install / download issue. Help Please!

I have attempted to download OSX ML 3 times now, each time the download completes, install runs then after restart there is no change. ML hasn't been installed. Anyone had the same issue? Any fix?

The next time you download Mountain Lion, make a copy and move it out of your Applications folder. That will save downloading it again.
What version of the OS are you currently running? If it is 10.7 try the below:
https://discussions.apple.com/message/21111661#21111661
If you look in your Applications Folder is the installer still there?
If you hold down the option/alt ket during a restart, do you see a recovery volume?
Are you getting any error messages?
Try booting into the Safe Mode to install it.
Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

OIF+OAM: install/config issues

This post is long. Hoping that at least one of the issues is seen by someone or someone has insights before we open SR(s) with Oracle.
We have a working OAM/OVD 11.1.1.5 installation (done according to the EDG at http://docs.oracle.com/cd/E21764_01/core.1111/e12035/toc.htm).
We started an evaluation of OIF and ran into some issues grouped under Install and Config categories.
h2. Install issues:
We installed it per chapter 16 of that EDG and and all the steps went OK except step 16.7 (http://docs.oracle.com/cd/E21764_01/core.1111/e12035/oif.htm#BAJCJHBG).The config properties userldaphaenabled, fedldaphaenabled are getting set via WLST but don't appear to be persisted anywhere. On a restart they are false again. Are they supposed to be saved to config.xml of the IDMDomain? Can I try adding them manually like this as child elements under each of the wls_oif managed servers?
<datastore>
<userldaphaenabled>true</userldaphaenabled>
<fedldaphaenabled>true</fedldaphaenabled>
</datastore>
If those settings were properly set what is it supposed to do? I can see that config.xml, cots.xml files are stored as blobs in one of the OIF db tables. Will the above setting move them from DB to LDAP?
h2. Config/Runtime Issues:
We proceeded with configuration because the /sp/metadata and /idp/metadata test URLs are working fine via the VIP address. we used this manual to do the integration.
http://docs.oracle.com/cd/E21764_01/doc.1111/e15740/oif.htm#CACJDDGE. In section 4.3.1.6 (Configure Oracle Identity Federation in SP Mode) of this document it says to configure Oracle SSO. We only have OAM and not osso. We went ahead and configured the second tab (OAM) in the screen capture in that section as well (is there any documentation on how to configure that tab?)
In SP mode (section 4.3) , testing of a resource protected with OIFScheme in OAM is not successful. It does not show any OIF login screen. Instead it takes the user to through these URLs:
     1.     https://sso.company.com/test-app/
     2.     https://sso.company.com/fed/user/sposso
     3.     https://sso.company.com/fed/user/authnoam?refid=id-tB20kXzmHjpn6MUSdOr7qbmd2OU-
     4.     https://sso.company.com/fed/sp/art20?SAMLart=AAQAAbV1ElKBtte9uuhKoeo4h%2FMufCdY2wDlDIM2T9dL%2BvhsvtfUrwCuZg8%3D&RelayState=id-JPh8MY05pAZRckl4yOc2J4-80GI-
and then shows this error in the browser:
Error 401--Unauthorized
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.2 401 Unauthorized
The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.46) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was given in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained in section 11.
The following errors are seen in the WLS_OIF1 (we turned off WLS_OIF2 during this test) managed server logs:
<Mar 10, 2012 10:58:37 AM PST> <Error> <oracle.security.fed.eventhandler.authn.engines.oam.OAMAuthnEventHandler> <FED-18068> <Authentication failed: WebGate did not authenticate the user>
<Mar 10, 2012 10:58:37 AM PST> <Emergency> <oracle.security.fed.model.config.Configuration> <FED-10174> <Property was not found: httpheaderattrcollector.>
<Mar 10, 2012 10:59:27 AM PST> <Warning> <oracle.security.fed.http.handlers.authn.LoginRequestHandler> <FED-18051> <Authentication instant was not sent from the authentication engine.>
<Mar 10, 2012 10:59:37 AM PST> <Error> <oracle.security.fed.util.ssl.KeystoreUtil> <FED-18080> <Could not retrieve key from the key store. Please verify that the key password is equal to the key store
< this error is followed by an exception shown below>
<Mar 10, 2012 10:59:39 AM PST> <Error> <oracle.security.fed.eventhandler.authn.engines.osso.OssoFinishSPSSOEventHandler> <FED-15134> <The service providercould not map the identity provider response to a user>
FED-18080 exception:
java.security.UnrecoverableKeyException: Cannot recover key
     at sun.security.provider.KeyProtector.recover(KeyProtector.java:311)
     at sun.security.provider.JavaKeyStore.engineGetKey(JavaKeyStore.java:121)
     at sun.security.provider.JavaKeyStore$JKS.engineGetKey(JavaKeyStore.java:38)
     at java.security.KeyStore.getKey(KeyStore.java:763)
     at com.sun.net.ssl.internal.ssl.SunX509KeyManagerImpl.<init>(SunX509KeyManagerImpl.java:113)
     at com.sun.net.ssl.internal.ssl.KeyManagerFactoryImpl$SunX509.engineInit(KeyManagerFactoryImpl.java:48)
     at javax.net.ssl.KeyManagerFactory.init(KeyManagerFactory.java:239)
     at oracle.security.fed.util.ssl.KeystoreUtil.createKeyManagers(Unknown Source)
     at oracle.security.fed.util.soap.OIFSSLProtocolSocketFactory.createSSLContext(Unknown Source)
     at oracle.security.fed.util.soap.OIFSSLProtocolSocketFactory.getSSLContext(Unknown Source)
     at oracle.security.fed.util.soap.OIFSSLProtocolSocketFactory.createSocket(Unknown Source)
     at oracle.security.fed.util.soap.OIFSSLProtocolSocketFactory.createSocket(Unknown Source)
     at org.apache.commons.httpclient.HttpConnection.open(HttpConnection.java:707)
     at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.open(MultiThreadedHttpConnectionManager.java:1361)
     at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:387)
     at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:346)
     at oracle.security.fed.util.soap.SimpleSoapSender.sendMessage(Unknown Source)
     at oracle.security.fed.http.flow.profiles.sp.SendSoapRequestSSOResponseHandler.perform(Unknown Source)
     at oracle.security.fed.controller.ApplicationController.processServletRequest(Unknown Source)
     at oracle.security.fed.controller.web.servlet.FederationServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
A minor other problem seems to be with adcri:
Cause: DFW-40112: There was an error executing adrci commands; the following errors have been found "Cannot run program "/app/iam/middleware/wlserver_10.3/server/adr/adrci": java.io.IOException: error=12, Cannot allocate memory"
Action: Ensure that command line tool "adrci" can be executed from the command line.
We can run the adcri tool from command line using the same LD_LIBRARY_PATH as used by the wls_oif1 server. Why is it trying to run it and failing and what is it trying to do? Can we turn it off?

I reinstalled the suite. This time, during the Policy Manager install I left the "Root Directory for Policy Domains" (step/page 7-12) at the default, which was "/". The GUI now works correctly.
On the previous install I changed the path to /AccessManagerPolicy -- it wasn't clear to me what the installer meant by 'root directory'. I did try to get /AccessManagerPolicy to work by creating a directory under my web root to match, but I still had issues with the Policy Domain -- the no policy domains would match. So, it looks like this parameter should never be changed in the installer.
Aaron.

Solaris 10 x86 Install - Firewire Issue

Greetings,
I am installing Solaris 10 x86 (03/05) and am running into a lot of trouble with the firewire drivers.
The first CD installs properly, but any subsequent reboot (to install other CDs or boot the OS) fails. By watching the boot messages on a boot -v, I discovered that the system hangs after loading the firewire drivers.
If I run the hardware configuration assistant during boot and remove both 1394 devices, I am allowed to boot - but only that once. Even if I save the hardware configuration and tell the hardware configuration tool to use it during the next boot (by pressing Esc and loading the profile), it automatically re-adds my 1394 devices and hangs. The only way I can successfully boot is by going into the hardware configuration assistant each time and removing the 1394 devices, each time. Removing the 1394 card is not an option, as this system boots other OSes for computer forensics via removable disk racks and the firewire is needed for these purposes.
So, my question is this - how can I tell Solaris to ignore the 1394 devices without manually removing them during each boot? And how can I get the hardware configuration assistant (the one that I launch by pressing Esc during the boot process) to actually use the configurations I've saved?
Thanks in advance.

I'm not sure what the root cause for the firewire driver hang is.
Maybe an issue with interrupt routing. You may want to experiment
with BIOS ACPI / IOAPIC / PnP OS settings, and/or the
acpi-user-options property.
Anyway, to get rid of the firewire driver, you can probably add an
"exclude: hci1394" line to /etc/system and reboot.

CMIS Webpart Install/Config Issue in SP 2010

Hello,
I have followed the entire Microsoft Guidelines step by step for the CMIS webpart. The only problem is I cannot get the webpart viewable when adding a new webpart. Everything looks good and seems to have worked. I activated the features
for CMIS on the site collection level. However when I make a new page or site....I add a new webpart I cannot see the CMIS webpart visible amongst all of the other webparts to add. Had anybody had this issue before? If you have seen this
or could relate I would really greatly appreciate any help! Thank you so much.

Can you check if there is any CMIS feature at site level as well. Site action > site settings > site features
on Add webpart do we see a new catagory added or cmis webpart in custom category
http://sharepoint.stackexchange.com/questions/58947/which-sharepoint-versions-support-cmis
I believe this support started with SharePoint 2010 by Microsoft bringing out the CMIS Connector, however this is an additional install. However it is available in SharePoint 2013, out of the box.
There is a good post on StackOverflow which is related to SharePoint 2010:
http://stackoverflow.com/questions/5090255/cmis-and-sharepoint
SharePoint 2010 Administration Toolkit Information here:
http://technet.microsoft.com/en-us/library/cc508851(v=office.14).aspx
SharePoint 2013 Information here:
http://msdn.microsoft.com/en-us/library/jj163233.aspx
http://stackoverflow.com/questions/5090255/cmis-and-sharepoint

Install/upgrade issue - xfree86

Hi,
I noticed something when installing/upgrading the xfree86 package... pacman appears to only download a portion (<20%) of the package, then it installs it. This isn't really a critical issue, since everything seems to work just fine, regardless. I'm just wondering why this is
BTW, I'm running fully-upgraded 0.4 arch.
altair

There's an integer overflow bug in the progress bar code. The file will download just fine, but the progress bar wraps after ~42mb.

MDT Application Package Install - Weird issue.

Hi Guys,
I've configured Windows 8.1 into MDT 2013 and everything seems to be going smoothly up until I try to stream Office 2013 365 into the image. I looked into the bdd.log on the machine as it attempts to run it but fails and I'm seeing this -
Using a local or mapped drive, no connection is required. ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
Change directory: Y:\Applications\Microsoft\Office\Microsoft_Office_2013\CTR ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
WARNING - unable to set working directory: (-2147024893) ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
Run Command:
bddrun.exe cmd.exe /c InstallOffice365CTR.bat ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
ZTI installing application ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
About to run command:
bddrun.exe cmd.exe /c InstallOffice365CTR.bat ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
Command has been started (process ID 2540) ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
Return code from command = 1 ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
Application Microsoft Office 2013 Install Script returned an unexpected return code: 1 ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
I'm pretty sure I can map Y: to the applications directory and fix this -- but my question is why is everything else pathing correctly to the network path but this install assumes that Y: is where it's stored? I'm about to recreate it completely to
see if it solves the issue. It's most definitely failing because Y: is not mapped but it's looking to a mapped Y: path. MDT is not showing a source directory on the package created. Same goes for the applications inside of the package being
installed. Any ideas? Thanks.
Ryan

Some install programs just don't like installing from UNC paths. It sucks. We also need to ensure that we have the correct credentials to connect to the network path.
MDT works around these limitations by taking the UNC path for programs in ZTIApplications, and mapping a drive to the path. This action also uses the credentials to map the drive to the UNC path. Super!
If MDT detects that a UNC path is *ALREAD* bound to a drive letter, it will skip over the step of mapping a new drive letter to the path, and use the path instead.
*THAT'S* why MDT is attempting to use Y:.
What we have not determined here is if Y:\Applications\Microsoft\Office\Microsoft_Office_2013\CTR actually exists when Y is mapped to the path in your applications entry.
Please check again, and then re-check, and if you are unsure, check permissions, and double check again. Then from a client machine map to a share and verify again.
I also can't check what your script is doing. Did it actually run? Do you have any logging in the script. Most likely the script never ran, and the 1 return code is because cmd.exe can't find the script.
Keith Garner - keithga.wordpress.com

Adobe Flasf update will not install/ password issues

I have been trying for a week to install the upgrade to adobe flash on my mac book pro OS,10.7.5. The major issue is Adobe will not accept my password. I have changed the password more times than I can count, but every time I get to the step that asks for the password and I type it in the box , it use shakes at me to tell me that the password is wrong. I triedthe Chat help line but the support person disconnected me and frankly I have bad arthritis and typing all the time just to get to someone who does understand the complexity of the problem is compounding the problem and certainly not resolving the issue . Is there some other product besides adobe that can be used. This is completely ridiculous and certainly not tech friendly.

Hey dommm56,
Please refer this kb file and let me know if it resolves your issue.
Error 1305 when you try to install an Adobe product (Windows)
Regards,
Anubha

EP 60 SP4 install sapinst issue

I am attempting to install EP 6 SP4 on Solaris.
When I start sapinst the sapinst screen is has what seems like an issue with language because it displays boxes where there is supposed to be text....this would indicate
a codepage issue. I checked our server and locales are correct. I even checked by running the older sapinst and it displayued correctly....
Has anyone seen this with the new patch...
I downloaded the patch from SMP.
I am running sapinst directly from another filesystem rather than extracting it....If I extract sapinst and attempt to run it, an error message occurs saying it can't find control.xml file....I am following the instructions from the SAP install manual. Any clue witrh this problem?
Thanks
John Ryan

Sorry meant SP2 patch4.......
John Ryan

Safari Redirects & Update / Install / Reinstall Issue

Hello All - I know this topic has been discussed in another thread - but evidently people are still having problems and it has not been solved (granted the question is answered - but not SOLVED). I am having an issue - I get redirects at random and I also have the issue that everyone else seems to be having with a reinstall and the error message of needing 10.5.3 (or whatever version - I got tired of keeping it straight) but it is the same issue.
Can we get this straight - or do we all need to go to Firefox?

Hi Laura
The problem lies in the 1.2 reinstall, which may have altered some of the core OS X files, hence the error message about "localized string not found". I came across this very same problem when attempting to help someone reinstall Safari 1.3.2. That thread is found here. The resolution in that thread was easy because the original poster had Safari Panther installed on a second machine. I'm posting this reference so you'll get a sense why you can't install 1.3+
There are a number of ways to approach this problem, however, the easiest path may be to reinstall the operating system, using Archive & Install.
Do you live near an Apple store? If you do, someone at the Genius Bar can help you with the reinstall process.
Post back

Premiere Elements 10 will not install - msiexec issue?

I have installed Photoshop Elements 10 without a problem. When I try to install Premiere Elements 10 (from the DVD autorun installation menu) the 'choose language' pop up appears then the 'configuring windows installer' window appears and the bar moves across. Then a Windows Installer version 5 pop up appears showing all the windows installer options. It has an 'ok' button at the bottom. When that is clicked the window disappears and nothing is installed. I have tried unregistering and re-registering msiexec (both 32 bit and 64 bit versions) but that did not help. I am using Windows 7 Ultimate 64 bit.

I'm having the same issues with installing premiere elements 10.
i have windows xp sp2, have enough disc space and memory to install the program. i am the only user on the computer with admin privileges
this is what I see when i click on setup.exe on the dvd. see this animated gif for visual: http://i.picasion.com/pic47/578e12bea8e438c33e7baa41cd0a3d82.gif
First the adobe install splash screen pops up. I click on install premiere 10. A popup indicates installshield working. Then finally the msiexec parameter window popups and ends there.
note: ignore the endless loop, the install process just ends with the msiexec popup window.
At first i thought it might be a msiexec issue, according to info i found, i tried to reregister msiexec. typed msiexec /unregister followed by msiexec /regserver but the problem didn't go away
Then I tried updating msiexec to version 3.1 but the new version didn't install. I tried updating msiexec to version 4.5. the new version of msiexec installed, but the same problem remains
a few weeks ago i installed and removed netframe thought that might be a problem, but it wasn't.
I also tried manually typing in msiexec and the msi package on the dvd, but it tells me to use setup.exe
If i install/uninstall something (going through to the start > settings > control panel > add/remove programs) installshield works.
not sure what to do next. i read this thread from the top and mentions the log files in the temp directory, i can't find any of these files.

Win 7 install permission issues

Hello,
I had the flash player crash, so iI uninstalled it now i can't reinstall due to permission issues. I have done the steps recommended in the troubleshooting, but has i run them, I see alot of failed operations in the dos window.

Dixit wrote:
hi satish,
thanks for reply, i know its not supported, but just trying to work as i have got win 7 installed and cant change it as its dual boot machine now with RHEL 5.3 installedThere's your solution ... install on the REHL side.
>
anyways but the issue is not due to compatibility i think... it might be because of privileges... i will definitlly try 11g R2, but still if u find any solution le me know.. as it is installed on OS means it can work on it as well right??
Thanks and regards
VD

Re-installing OS issues...

Similar Messages

Maybe you are looking for