Re-installing OSX Lion on a new hard drive

I'm thinking about replacing my 320 GB hard drive. I just bought my mac a couple of weeks ago. I noticed that Apple recently upgraded their line of macbook pro computers. Since I want to replace my hard drive with a new one. I was wondering if I really need to clone an external hard drive in order to reinstall osx lion again? Should I follow this procedure that I saw on apple's web site?
http://support.apple.com/kb/HT4718

No, you don't need to do that.  Just literally clone the old drive to the new one using Carbon Copy Cloner (CCC), Super Duper or the Mac's Disk Utility.  Best way to do that IMHO is to put the new drive into an external enclosure, preferably FireWire since it's a lot faster than USB, do the clone to the external, reboot to the external to make sure it's working correctly, and then swap the internal and external.  Not only is this faster, it leaves you with a bootable clone (your old internal drive) in case of emergency.
Replacing the hard drive in a MacBook Pro is pretty straightforward.  You'll just need the right size Phillips and Torx screwdrivers.

Similar Messages

  • How do I re-install Mountain Lion on a new hard drive (replacement)?

    I have an older iMac 24" (2007) that has been up-graded to Mountain lion.  I want to replace my hard drive with a bigger one (has 500Gb).  How can I re-install Mountain Lion on my new drive?  I have Time Machine on this machine.

    Install 10.6 and 10.8 onto the new drive exactly how you did it on the old drive, except that you won't need to pay to redownload 10.8. Alternatively, if you kept a copy of the 10.8 installer, you can just rerun it.
    (72891)

  • Cant install mountain lion on a new hard drive 2011 mac pro 17"

    for some reason I bought the infamous 2011 mac pro, and the hard drive kept having IN/OUT problems and after it destroyed half day of work, I decided to get a new hard drive, *blue WD 500g" but i have tried EVERYTHING and i just cant install mountain lion on it.
    1.- i tried forcing the recovery mode so It would connect to the internet and download mountain lion but after 10 min or so i trows the -2002f error at me
    2.- I tried to use the old hard drive that i put on a external hard drive reader so I could get the recovery partition but i just keep restarting the installation no reason given
    3.- downloaded the mountain lion and tried to installing it on the system hard drive of the laptop trough a computer running snow leopard but dosn't let me.
    4.- tried the same thing on target mode without success
    5.- using the recovery partition I used disk utility to se of the partition was locked but it was not
    6.- created a different partition to see if it would install it  there didn't work.
    i just don't understand why
    any toughs?
    if you answer this you would be a personal hero of mine
    cheers

    Make Your Own Mavericks, Mountain/Lion Installer
    After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
       2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
    Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    Use DiskMaker X to put your installer clone onto the USB flash drive.
    Make your own Mavericks flash drive installer using the Mavericks tool:
    You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
    You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
         sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
         /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
    Wait for the process to complete which will take quite some time.

  • How install osx after putting in new hard drive

    just installed a new hard drive, and am getting a white screen with a flashing folder witha ?. please help!!!!! i also dont have my install discs.

    With no OS X discs on hand, and no bootable backup .... do you have a friend with a mac that you can hook up via firewire cable in target disk mode?
    If those are all no, you can call Apple support to see if you can buy another set of OS X disks that came with your system, or if you just want to install the 10.6 Snow Leopard operating system, you can call the online Apple store at 800-MY-APPLE to buy a copy, or take your system to an Apple store or Apple Authorized Service Provider and see if they'll initialize and install an operating system for you.

  • I am trying to re-install mountain lion on a new hard drive on a mac pro but get a backward slash with a circle

    I am trying to reinstall mountain lion in a mac pro with a new ssd drive but will not let me. It gives me a back slash with a circle. I have 2 optical drives, first is a blu-ray and the second is a super drive. could that be the cause?

    Firstly, you need to partition and format the SSD. You need to be able to boot the computer from another drive that has a bootable OS X system installed or a Snow Leopard DVD installer that works on the computer.
    Install Lion/Mountain Lion on a New HDD/SDD
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • How do I install Mountain Lion on a new hard drive

    Bit of a novice here.
    13inch MacBook Pro mid 2009 unibody user. Upgraded to Mountain Lion via download. I need to upgrade my HD for more space. No longer have the install CDs that came with it.
    How do I go about installing the OS on the new HD?
    Many thanks.

    As an additional thought:
    You may want to consider contacting Apple for replacement install disks anyway for whatever OS it came with because:
    Your license for Mountain Lion purchased at MAS is not transferable - it is forever tied to your Apple ID (and the machine ID). If you sell/gift your Mac, you will need to erase the Mountain Lion and reinstall the original OS; otherwise the buyer will have an illegal copy and will not be able to reinstall (because the Apple ID is not the same as it was when purchased).

  • How do i intall mountain lion on a new hard drive

    How do i do it?
    I bought a new 13" MBP a few weeks back and have now got my SSD. I realise that Apple no longer give out OS install discs and i don't have mountain lion purchased on my app store as it came with my laptop. So how do i install mountain lion on my new hard drive without having to buy mountain lion.

    Option 1  - Newer Mac's like your come with internet recovery. Which means if your drive fails or is corrupted or in your case your install a brand new drive, internet recovery will let you reinstall the OS you are eligible for. So replace your drive and boot your system with cmd + R keys pressed down for 15 secs or so and your machine hooked to the internet. This will install ML from apple in your case.
    Option 2 - Clone or backup (your entire system using time machine) your hard drive to a external USB disk. Replace your drive and then restore the new drive from the clone or backup.
    Check this site for related articles .... http://nyacomputing.com/category/os/mac-os-x/

  • Any ideas on how I install Lion on a new hard drive

    Any ideas on how I might install Lion on a new hard drive when I purchased the OS online from Apple prior to my hard drive failing?       I don't have a disk. 

    when you install your new drive, what happens? it should boot into internet recovery and you setup from there.
    does it not do that?
    here is an article about how to force internet recover http://www.cultofmac.com/106669/force-lion-to-start-internet-recovery-on-your-20 11-or-later-mac-os-x-tips/
    here is apple literature about the recovery partition (if you had a hard drive) http://www.apple.com/osx/recovery/
    here is a do it yourself downloader that makes a usb stick the recovery disk. If you have data on the usb drive I would back it up, as this will erase everything else on the thumb drive. http://support.apple.com/kb/DL1433

  • Can I install Mountain Lion on a different hard drive when it's already installed on one hard drive?

    I have a Mac Pro with two 2TB hard drives installed, one I use for storage, and one as my startup disk (also store things on there as well). I just installed two new 2TB drives and have set up a RAID 0 with them. I want to use the RAID drive as my start up disk, but I'm not sure if I can install Mountain Lion on the new RAID drive while it is still on the original start up drive. I also don't want to lose or erase any information from my current start up drive. Can anyone offer me guidance??

    Firstly, you need to partition and format the SSD. You need to be able to boot the computer from another drive that has a bootable OS X system installed or a Snow Leopard DVD installer that works on the computer.
    Install Lion/Mountain Lion on a New HDD/SDD
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Need Help Installing an OS on a new Hard Drive

    H, I just installed a new Hard Drive on my G4. My problem is I cannot find the original G4 install discs.
    I do have OSX Panther discs which I bought later. Can I use these to install a new OS?
    How would I do this as the new Hard Drive is brand new and probably not formatted? Do I power up the mac and load the Panther install disc 1 or is this not the correct procedure?
    Also I have an external LaCie CD drive because the one in the mac doesn't work. Will the external LaCie CD drive be recognized when I put the OSX Panther discs in it to install an OS on my new Hard Drive?
    Sorry for so many questions but I don't want to mess this up.
    Thanks

    Thanks for replying Thomas. Well my G4 Hard Drive was shot so I took it out and installed a new one so I have to reinstall everything (new OS & all applications). I tried to use Super Duper to Clone the HD but the HD was too far gone, so now I need to install an OS on the new Hard Drive.
    I can't find my original G4 install cd's. I do have Panther OS discs and an iLife disc I bought awhile back. Can I use these instead of the original G4 install disc?
    Here's the process to install a new OS as I understand it. Please correct me if I am wrong or am missing a step.
    1) Put the first Panther install disc in the cd tray.
    2) Power up the G4 while holding down the "C" key
    3) Follow the installation instructions
    Thanks!

  • I'm having to re-install PSE 11 on a new hard Drive.  I clicked the installer and it ran, but says it's missing the .exe file.  I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11.  Now I'm contactin

    I'm having to re-install PSE 11 on a new hard Drive.  I clicked the installer and it ran, but says it's missing the .exe file.  I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11.  Now I'm contacting you

    Okay, so, fast forward from July to now -
    - I've visited my closest Apple store's genius bar twice now. (Over an hour and a half away.)
    - My computer spent at least 8 hours behind their closed doors in the workshop
    - Several complete erases of the harddrive have taken place
    - Most of the Apple geniuses I dealt with were nice and very knowledgeable, but they were and still aren't 100% sure exactly what is wrong with my computer.
    The good news is:
    - They were able to at least get it running again, with a clean install from their servers of OS X Lion 10.7.5
    - They believe that my problems stem from either 1 of 2 things:
            - Faulty Hard Drive (even though it is brand new)
             - The wrong build of software being installed.
    Now, while the wrong build does seem like it could be the problem, it doesn't make sense in the aspect that all of the initial problems began when the first hard drive failed. The same problems continued when I changed out the failed hard drive with the brand spanking new one, and only slightly improved when I was able to successfully install the OS that came with the original disks for my computer. I'm not convinced this thing is back to normal, but hopefully I can make it last through getting a shiny new retina Macbook Pro in the coming future. Thank you so much to everyone who read and replied to this post!
    - Andrew =)

  • Installing OS X on a NEW hard drive

    I just installed a new hard drive on the macbook pro. however, when i run the installation disk it never actually installes os x instead it trys to install the applications, but cant find the drive. How do I install OS X on a new hard drive? Thanks.

    Hello,
    The first thing you need to do is partition and format the drive.
    From the OS X installation screen, go up to the menus at the top, and locate Disk Utility.
    Launch Disk Utility.
    Now, select your hard drive on the left.
    Then, click on the Partitions Tab.
    Now, choose the single partition option (unless you want to divide the drive for some reason). Then, give it a name.
    Choose the format "Mac OS X Extended (Journaled).
    Now, click on the button to partition the drive.
    When it's done, exit Disk Utility.
    Now, proceed with the installation. If it still won't see the hard drive, then re-start from the installation disk again and try it again. It should see the hard drive now and permit you to install on it.
    I hope this helps.
    Let us know if you have other questions.
    P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

  • How can I re-install CS2 upgrade on a new hard drive without serial no. of previous Photoshop 5?

    A new hard drive has been installed on my G4 Mac with OS10.4. I am trying to re-install CS2 Premium on the new hard drive but I no longer have the serial number of my previous Photoshop 5. I need to enter this as the CS2 was an upgrade. I have spoken to Adobe technical support but they no longer support CS2 so are not able to help. They recommended that I try the Adbe Forum. All my Adobe products have been bought legitimately. I know people manage to use pirated Adobe software so there must be some way for me to activate a legally bought product.

    Michael
    Thank you for your email and suggestion.
    I have tried that and the only product listed is my CS5 Design Premium (which was an upgrade), none of my previous Adobe products are listed.
    I am now looking to see if I can buy an old version of Photoshop that will work on a Power PC G4 Mac with OS 10.4.
    I only need Photoshop on that Mac to paint from, not the rest of the Suite.
    It is infuriating that I already have a legitimately bought Adobe product (as all mine have been) but I am unable to use it.
    Regards
    Trevor

  • Installing Mountain Lion onto an external hard Drive

    Hi
    I am running snow Leoprd and what to keep this as my main OS on my internal HD due to work, I want to install Mountain Lion onto an external Hard Drive and boot and run from an external HD as opposed to my internal
    I will be likely to be using a thunderbolt connection for the external HD
    Has anyone had any experience with this and any tip or faults?
    I will be using Logic mainly]

    Works just like installing on an internal drive. Just be sure to choose the correct target before clicking on the Install button.
    If you have sufficient space on your internal hard drive you could also make a partition on it in which to install Mountain Lion. This will be faster and more convenient that an external drive.

  • How to install Windows XP on a new hard drive in desktop computer

    Have a Lenovo desktop. I replaced the defective hard drive.  Obtained Windows XP installation disks from Lenovo.  I received recovery  two
    Recovery CDs, namely Rescue and  Recovery CD and Product Recovery CD along with 5 CD Roms ( 1of 5 through 5of 5).
    I want to install Windows XP in my new Hitachi hard drive.  Should I use only the 5 CD ROMS 1 thru 5, leaving out the Recovery and Rescue CD
    and Product Recovery CD Rom.
    How to I install Window XP in my new hard drive?  I am not a computer
    wizard. As a retired IBM senior citizen I need some help from the community.  I am not cognizant with the steps to follow.  I am a new
    member of this great community.
    Thanks a bunch ! padman
    personal informations removed for your own security

    padman215, welcome to the forum,
    you need to boot from the Rescue and Recovery cd and select to recover the system and then to recover to factory state. It will then eventually ask for the other discs.
    Please be sure that you read the messages carefully; if it asks for a supplementary disc, (which you don't seem to have), you need to click on "no" should it ask for one - this throws alot of people.
    Happy installing
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

Maybe you are looking for

  • Hp Slate 7-2801 charging port is loose & doesn't charge anymore

    I too have the sam problem in charging my hp tab. I guess the charging port is loose and doesn't fit well (tightly)with the cable. Now my battery is drained out and i have no way of charging it. Have tried other cables also but din't help. The model

  • Using filter in PAPI-WS to search instances based on project variables

    Hi All I wanted to search the BPM instances from my external application. Used PAP-WS to do that. To be precise, I was using the filterbean, and have set the process scope, status scope, and the variable on which I want to filter. However, I noticed

  • F.5D, F.5E Bus Area Adjustment

    Hi, Give me Explanatiion for below. 1) what is the use of Bus Area Adjustment ? 2) How the entires will be Adjusted ? 3) How the Bus Area balances will tally ? 4) what are the steps to be followed to complete the process. please guide me.... Regards,

  • What's Backed up each time

    I know this has been asked, but with 10.5.2 out I was wondering if it now logs what was backed up each time somewhere. I have looked over some of the logs and all I can find are summaries of what happened. Below is my summary. Feb 14 17:34:14 MyMac /

  • Is it possibile to move an Object after applying a Flip Smart Build, in the same slide?

    Hi, I'm relatively new to Keynote and am trying to incorporate a simple animation a particular slide. I've got an object which I need to flip over, then move to a certian place in the slide. I have created the Flip action in the Build section, but on