Re installing phone software failed

Hi
i was trying to reinstall my phone firmware using nokia suite but after backup my pc crashed and a blue screen comes up it was a kernel security check failure.
I am using windows 8 release preview any solution for this problem
Solved!
Go to Solution.

@ sanjib1991 - Didn't mention which phone ? Have a look HERE. If you have an Asha series phone, the ONLY thing you can try is remove the battery for a couple of minutes, insert and see if the phone switches ON. Else, need to visit Nokia Care
BTW the phone switches OFF and ON on its own a few times during the Update / Re-install process. When it switches OFF its quite obvious that the Nokia Suite will inform you that the phone is disconnected. It should get reconnected, once it switches ON .. 

Similar Messages

  • IOS5 install. phone restore failing. returning error (-10)

    running itunes 10.5 on windows7. attempted iOS5 install. phone restore continually failing returning error (-10)

    had a similar problem running plain leopard on a mac mini... just about to start beating my head against the wall when i tried:
    -backed up the pre-5 iphone using itunes
    -made sure the ios5 software was downloaded
    -clicked on restore instead of update, since "restore" will use the latest iOS, installed just fine. No data lost.

  • Re-Install Phone software when its switched off/ R...

    Hi
    i own a Nokia 5610 xpressmusic mobile, the problem i face is its software is totally unstable and it crashes often and the phone doesnot switch on or hangs or restarts again and again.. after swtching on. till now i run to service center to instal the software again to make it right.. But as my warranty is gonna expire soon.. Do u know any way by which i can re-install or factory reset through computer when its switched off. i tried software updater but its not able to detect the switched off phone.
    Plz suggest a solution.
    How to instal software when the mobile is not swtching on

    You can't do anything on a Series 40 phone such as the 5610 XM other than a revert to factory default settings, which probably won't solve the problem for you.
    You need to take the phone to a Nokia Care Point before the warranty expires and get them to fix the phone.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Installing desktop software fails

    When installing desktop software version 4.7 from disc or net, the install starts - asks you which language you would like, the comes up with the wizard was interrupted before software could be installed.....
    have tried various versions same result...
    can someone please help as i need to remove ticketmaster app which only works in america... not much good in uk
    Cheers

    I'm having the exact same problem going from treo 600 verizon to centro att and windows vista. the first install failed just like the above user, redid it and received no option to import data. Tried the suggested reinstall from the downloaded version and got the import option this time, but nothing shows up on the desktop, no old data, nothing.
    I notice in the data folders on my computer that the old file type are there, as well as the new types, with considerably smaller sizes, no doubt because there's no data in them. Looks like the new desktop is simply saving the old files, but did not actually convert them.
    I can't believe more people don't have this problem. I found one other similar post from a 650 user. someone suggested synching the old treo with the new desktop. i tried that too, but still no data appears (no error message either).
     Any help would be appreciated.
    Post relates to: Centro (AT&T)

  • Install from software failed AND install from DVD failed....

    I downloaded Mountain Lion from the App Store and burned a bootable disc, or so I thought, before installing. Upon installing (from the hard drive version), the hard disk failed and ML wouldn't install, nor would the drive even mount any more. (Luckily, I ran time machine so my dada isn't lost.) So today I bought a new HD and spent 4 hours zeroing it.
    I put in the bootable DVD and, after 10 minutes, it finally tried to install. Then it said "There was an error installing the system. Please try reinstalling the operating system." (Dear Apple, that is not the mot helpful error message.)
    So, I tried to use the utilities on the DVD to restore from my Time Machine backup, but the tools never loaded!!
    I finally got the old drive to mount, so I started CCC but now the drive unmounts itself about 3GB into an attempted clone.
    I don't have a Lion DVD because I can't find the one that came with my MacBook.
    NOW WHAT?! :-(
    My Mountain Lion App Store purchase is verified right? Can I attempt to download the ML installer on my 10.6 machine and possibly re-burn a disc? (Does it matter if it's +R DL or -R DL?)

    You mean updating from the downloader? I tried that first, it's what crashed the drive to begin with.

  • 5220 express music phone software

    5220 express music phone's software autometically destroyed, when phone's software became 5 or 6 month old. Then it need to install phone software. It's make problem. So please give an update for 5220 express music on nokia site. It will solve our problem. Please.

    this is the major problem music player don't wark but the shortcut keys use music starts

  • E71 GPS and 410.21.010 phone software update

    GPS worked pretty well with the previously installed phone software (200.....).
    I have just got the last available level (410.21.010) installed and GPS connection isn't working anymore, or at last awfully slow connecting to satellites (tens of minutes).

    Same here but thankfully Google Maps is still working fine.

  • HT5622 Actually um trying to update new iOS 7 for my iphone 4 but when i press the button to install new software suddenly it appears why " iOs 7 failed verification because you are no longer connected to the internet " even my phone is already connected

    hie there Actually um trying to update new iOS 7 for my iphone 4 but when i press the button to install new software suddenly it appears why " iOs 7 failed verification because you are no longer connected to the internet " even my phone is already connected to net

    I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
    Thanks very much for your feedback.

  • HT4623 I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

    I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

    Hi there KrisonCastillo,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    -Griff W.

  • I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

    I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

    Hi, stig2013. 
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps. 
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Cheers,
    Jason H. 

  • During an update of the applications on the BlackBerry smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatis

    I have reset both my torch and playbook back to original only thing that I kept was my contact. And still problems I am a few min away from leave my loved blackberry and going android !! Or heaven help us Phone
    Issues 1) playbook wont connect to desktop manager anymore 
    2) Play book has 2 calendar icons with two different settings on them ??? I have one that is currently working with my yahoo email and calendar account. 
    3) my Phone when connected to desk top software shows the calendar as read only
    4) Unable to update my phone says During an update of the applications on the BlackBerry® smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatisfactory dependencies." 
    I just want my email and Calendars to work I am tried of spending nights trying to get these deices working !!! 
    someone please help me. !! 
    I know you are going to ask I have updated everything last time and it is all as update as it can get. 
    As for now as I wait I am going to wipe my phone again and just set everything up again !! If I have to even my contacts AHHHH Help I am starting to think crazy thoughts 

    Did you try to eboot the your PC or laptop where your device is connected ?
    I experienced this with my windows laptop, after a failed to do an update, I restart the laptop and my Torch, then retried, and it's worked

  • Why installing Nokia software updater fail ?

    There come some error message when i try install Nokia software updater on my pc.
    I use Win XP pro FIN with latest updates.
    Ill try install latest software updater for a few times but all same error message.
    Because i cant copy what its prompt ill cant put it this.
    Before all things work properly but latest updater wont work.
    Same think comes when try update from nokia pc suite,,,Sucks...

    Installer failing could be a corrupt download redownload .
    Could try new Beta updater .
    /t5/Software-Updates/New-Nokia-Software-Updater-quot-BETA-quot/td-p/715122
    Or update via the OTA service on your phone    *#0000#
     jje

  • Installing UK software version for s930 phone

    Lenovo S930 I bought this phone via a Chinese website (deals extreme) and made the assumption that as it was ordered for the UK it would come English/  I have managed to get most of it in English but it is still pretty much a mess.  I downloaded the open source file S930_Open_Source_20131112.zip from the Lenovo UK Support website, hoping that this would install and I would have the UK version of Android 4.2.2  which is the phones current version but it is a Chinese version.
    I’m OK with PC installations but am pretty clueless when it comes to phones and android.
    I have done a factory reset and tried to upgrade from a external sd card which is where the downloaded file is but it keeps on coming back failed.
    I have looked at the README file with the download and it contains no instructions on how to install the software.
    I would be grateful if anyone could help, please bear in mind that my technical knowledge of phones and android installations are limited.
    Regards, John

    Fourth post on that thread, it says how to install Google Apps (gapps in short which include google play as well).
    Chinese applications can be uninstalled via Titianium Backup https://play.google.com/store/apps/details?id=com.​keramidas.TitaniumBackup (you have to root your phone though)

  • I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6 and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previou

    I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6)and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previous vesions. I can't even find a tab for synching. very strange. any help is appriciated.

    iTunes 10.7 is compatible with Snow Leopard.
    You can download it here: http://www.apple.com/itunes/

  • I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    Hi Ali,
    I'll just add this reference to the good tips from my friend Manish (+5)
    Support for the 7800 series in CUCM 8.6.2 was first added with this
    Device Pack;
    Cisco Unified Communications Manager
    Device Package 8.6(2)(24104-1)Release Notes
    Cisco Unified Communications Manager Device Package Release 8.6(2)
    adds support for the Cisco IP Phones
    7821, 7841, and 7861 running SIP firmware release 10.1(1).
    The steps are in this doc
    http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
    You might as well install the latest 8.6.2 Device pack
    cmterm-devicepack8.6.2.24112-1.cop.sgn
    Cheers!
    Rob
    "Seek it out and ye shall find  " 
    - OneRepublic

Maybe you are looking for

  • HP Touchsmart 600-1047 - Password does not work - Locked out

    I read all the posts and did not find this particular issue. I powered down my PC, unplugged it, and pushed the power button to remove all electricity. Turned it on, chose my user account, and entered my password. I know I am entering the correct pas

  • FBE1 multiple reason codes

    Dear Experts, In FBE1, We have two reason codes for deducting amount from bill amount. e.g. Bill correction amt and TDS. However, we have tried to enter it as new item. Along with payment amt we entered TDS and clicking on new item entered the correc

  • Integration of SQL database with XI

    Dear All, I have a req in that I have to connect to SQL Server database to XI system then from XI to ECC. To do this what are Connection should done from DatabaseXI-ECC. I have JDBC adapter in XI.Do I need install again in XI . how we will connect SQ

  • How do I un-install Acrobat X Pro Trial Version?

    HELP ME! I need to get this program off my computer. I know i can't afford it when the trial version is done so I want to take it off and stop clicking on keep using trial version all day long. HOWEVER, IT'S NOT LETTING ME UNINSTALL IT! I keep gettin

  • Gnome 3.16 resume from suspend weird issues

    After upgrade to gnome 3.16 with gnome-shell 3.16.1-2  and gdm 3.16.1.1-1, also with previous 3.16 versions, after I suspend to ram for some time and resume from it, the gdm window freezes and cannot input. After some tty switching using ctrl+alt+f1/