Re-installing Qmaster and Compressor on Final Cut Server

I need to re-install Compressor and Qmaster on an xServe which is our Final Cut Server. I'm reading that re-installing from AppleQmasterNode.mpkg will not work, I have to do it from the Install Final Cut Server icon.
I'm wondering what effect, if any, re-installing Final Cut Server on our xServe will have on our client computers that run the Final Cut Server client application.
Thanks so much.
Matt Taylor

If you only remove Compressor & Qmaster by following http://support.apple.com/kb/TS1888, then running the Final Cut Server installation will only reinstall those items you removed. If you're on FCSVR 1.5.2, You will also need to run software update afterwards to update Compressor to 3.5.3.
~D

Similar Messages

Can I use motion 5 and Compressor with Final Cut Pro 7?

Hi, Guys and Girls:
After reading a lot about the new Final Cut X I decided not to buy it. I´m not gonna say anything about it, pretty much everything has been said so there´s no point in being redundant about it.
So my question is this:
Can I use the new version of Motion and Compressor with the old Final Cut Pro 7?
I heard the new version of Motion is nice, not so sure about the new Compressor but any improvement would be nice.
Thanks in advance.
Daniel Sametz.

Anyone?
Can I use the new version of Motion and Compressor with the old Final Cut Pro 7?

We've just downloaded Maverick and the new final cut 10.1. On two separate computers it has crashed and we have lost our entire project that we were editing. Not sure if it is a final cut problem or maverick. Any suggestions on how to get the timeline

We just installed maverick and the new final cut. On 2 separate computers we have had it crash while using final cut and have lost the project. Now we are reading that our time machine is not working with maverick. Any suggestions on how to get timeline back from the new final cut? Thought it was suppose to save automatically.

We just installed maverick and the new final cut. On 2 separate computers we have had it crash while using final cut and have lost the project. Now we are reading that our time machine is not working with maverick. Any suggestions on how to get timeline back from the new final cut? Thought it was suppose to save automatically.

Final Cut Server and Mountain Lion

Ok, so I have been trying to get Final Cut Server to work on Mountain Lion Server, and I have been so far following the path that has been set forth here...
http://krypted.com/mac-os-x/installing-final-cut-server-on-lion-mountain-lion-se rver/
I have gotten through all of the steps except for the last one, which is concerning the "0000_any_80_.conf" file. My problem is, that this file doesn't exist at all on my system. In my /etc/apache2 folder there is no /etc/apache2/sites folder. I don't know what the junk is up with that. Neither the folder or the .conf file exist. I don't know if I'm just stupid or what. Don't know much about setting up apache. But in my Server app, "Websites" is up and running. Final Cut Server is even up and running in the System Preferences. I just have no way to download the client app. Has anyone else had this problem?

And the file
/etc/apache2/httpd.conf
In mountain Lion is
/Library/Server/Web/Config/apache2/httpd_server_app.conf

Quicktime Export Components in Final Cut Server

Our company has purchased a number of Elgato h264 encoders and we're loving them. They reduce our h264 compression times on average from 15-20 mins down to 2-3 mins. It usually compresses our videos faster than real time. Which as a news organization is great for us. These encoders work great on all our Macbook Pros & Mac Pro systems. I've now installed one onto our final cut server and set up a custom compressor setting. Under the 'encoder' tab the file format had to be set to "Quicktime Export Components" instead of "Quicktime Movie" to use the Elgato. And it works great when I send a single file threw compressor. BUT I can't get this custom preset to show up or work inside Final Cut Server. I have other custom settings that do show up and work (but they are all "Quicktime Movie" file formats). I've rebooted multiple times and looked under multiple Responses transcode settings, but the new one I've created to use the Elgato never shows up.
Is it possible to use Quicktime Export Components in Final Cut Server?
I couldn't find any mention of this in the FCS admin manual or any other posts in the forums regarding this.

I have seen on MediaSilo.com a tip to get Elgato H.264 working with Compressor, but I can't seem to be able to find it. Basically, the trick was to create a duplicate setting in Compressor that Final Cut Server is able to read ( not as Quicktime Export Component), associate it with a Final Cut Server's compression setting and later reassign that setting in Compressor to Elgato.
I will keep diggin' for this tip, it was actually a screen recording.

Final cut server watcher never stop to transcode files

Hi, here my problem:
first of all this is my hardware:
1 xserve
1 xride (where are stored proxy files and thumbnails for final cut server) connected to xserve via fiberchannel
2 mac pro connected via 1Gb lan
2 macbook connected via 1Gb lan
1 macbook pro connected via 1Gb lan
1 nas connected via 1Gb lan
this is the software:
compressor installed on all the MACs
final cut server installed on the xserve
we need this system to encode mov files and create flv video for internet streaming content; the FCS watches a folder in the NAS (where we save the mov files) and then creates the video assets and the flv files. the flv file created will then be moved to another folder (still by automations)
the FCS watcher (the automation that creates flv) suddenly starts to transcode all the file already transcoded. to make the situation worse, the FCS job monitor allows to cancel just one job at time... we have thousands of movs in that folder so you can understand how big the problem is , but even if i stop all the transcoding one by one, it restarts to transcode from beginning.
well, thats all
hoping that it will not be more difficult to understand my english than to solve the above issue
thank you a lot

well... yes I want track the file but if in the flv copy response automation I set metadata to something like "Media" I will have two assets of the same file.
I will make an example:
I need to process the file myfile.mov (i remind you is a DV file); so I want to convert it in flv (i will upload it on my website afterwards, using as source the file copied by automation in NAS/FLV folder), successively I will put myfile.mov in my catalogue (with the Copy Response, No conversion, metadata set to "Media") cause what i want to catalogue is just the .mov file and not the .flv.
if I set the metadata in the flv copy response I will get an assets both the flv and mov file, but as told you _I just need the last one.
That's why i asked you if it is the right procedure or there is some other way less costly in terms of time and resources.
I hope you will see what i mean

Open Source Final Cut Server

It would make sense to open source Final Cut Server instead of discontinuing it. Many depend on it and have massive asset libraries and workflows that will not be moving any time and need support. QuickTime/Darwin Streaming Server is open source and thriving. Final Cut Server should be given that chance as it still has many uses and a lot of potential in areas that Apple hasn't explored.
Apple please give back to community of loyal users and pro's around the world by open sourcing Final Cut Server and not letting it sit on the shelf like Shake collecting dust when it could be so much more!

I agree with this. We have invested too much to simply abandon our infrastructure and explore other options. Open source would be in everyone's best interest. I encourage you to visit the FCSvr feedback page and recommend this. http://www.apple.com/feedback/finalcutserver.html. Please be constructive - there has been enough temper tantrums and gripes about FCSvr being killed and the new way the FCPX works. Please be detailed about how you use FCSvr, any customization you've done, especially if they involve using the command line tools and scripting in any form. I personally have invested countless hours pouring over bash scripts, scouring the 43 "px" tables in the postgres database looking for ways to improve our setup, and writing libraries of functions to make scripting easy. I figured out how to customize our distribution to make it do what we need it to do, to serve our business and our clients. If the road ends here, was that all for nothing? FCSvr is a great product. I know that it doesn't jive with FCPX new ways of thinking. I know FCPX has range keywording and metadata capabilities. But what of a notification system? What of a transcoding server? What of subscription/responses triggering actions like archiving to tape? What about support for changing metadata with third party solutions? What about publishing the catalog to online services like MediaSilo? There are countless functions that have become part of the workflow of professional production companies. FCSvr has totally changed the way we work and think about our assets. I was just beginning to get somewhere with our producers and editors, and I really don't want to stop now. Open sourcing FCSvr would give developers the opportunity to write their own modules for FCSvr, we could see support for all kinds of functionality. It's not going to happen though if you don't tell them you need it. Send your feedback using the feedback page. Talk to the vendor you bought FCSvr from or the person who installed it in your organization and encourage them to have this discussion with the people at Apple who can make a difference. Please take action, don't just gripe and make broad stroke suggestions here on the forum. Thanks for your time.

Backup Final Cut Server Asset Library

Hi,
I like to find out the correct procedure to backup and restore the Final Cut Server Asset Library, and able to link up the catalog correctly.
There are instructions to backup and restore the FC Server catalog, proxies, etc, but I'm unable to find instructions for the asset library.
It's possible that the FC Server hardware goes down or Mac OS X gets corrupted, with the instructions available, it's possible to get the FC Server back working.
It's also possible that the storage hardware of asset library will fail, so I like to find out the procedure so the FC Server catalog " does not" to see the restored asset as "new".
Cheers,
Ben

Ok, nothing until now, that`s probably a tough one.
More news:
1- Recover don`t do anything, any point in time doesn`t change this problem.
2- Installing FCSrv from DVD doesn`t do anything as well the 1.1.1 update.
3- installed fresh FCSrv on another machine for tests and of course those fields are there in this new install. Compared thoroughly each ASSET_SEARCH, PAGRPASSET, ASSETTILESVIEW, ASSETINFOVIEW, ASSETTHUMBNAILVIEW, Metadata Groups between two FCsrv (the good one -fresh - and the old one) with no difference.
4- Just to clarify: I had lots of .mov files WITH all ok (with this fields appearing) on the old FCSrv, suddenly it vanished and the only thing that appears is the title (just the title not the "title:"). It doesn`t matter if upload, scan or anything. It doesn`t matter if it`s a photo (.jpeg) or .mov or anything. It doesn`t matter if it`s inside a production.
5- Just to rule out the possibility of FCSrv ruining Mime Type from the original files, I`ve uploaded from OLD-FCSRV MEDIA device to the new one and all it`s ok like the second image (that I`ve found on the FCSrv online manual).
I`ll nonetheless install FCSrv fresh on this machine anyway, but I just want to know what triggered this strange, odd and bizarre behavior if it happens again in the future.
Thank you very much for any help or comments
Regards

Send to Apple TV From Final Cut Server

This was pretty simple, but clients really seem to appreciate having the functionality. Basically all you have to do is follow these steps to create a checkbox that can send any asset to your Apple TV for client viewing.
1. Create the field "Send to Apple TV".
2. Add that field to your Asset Search MD group and the MD goup that you wish people to access it in.
3. Create a Final Cut Server Playlist in iTunes
4. Open Automator in OSX. Create a Folder Action using the "Add Songs to Playlist" action from iTunes.
- Choose your Final Cut Server Playlist
5. Assign the folder action to a folder of your choice.
6. Create a Device "Apple TV" in Final Cut Server that points to that folder.
7. Create a transcode setting for "Apple TV H.264" and import to Final Cut Server
- Assign this transcode setting to your Apple TV Device
8. Create a "Send to Apple TV" Copy Response
- The destination device is "Apple TV"
- Transcode Setting is "Apple TV H.264"
9. Open Itunes on the Final Cut Server
- Setup your Apple TV
- Have the Apple TV automatically get the latest files from your Final Cut Server Playlist and send them to your Apple TV.
Done!
- Jason
Jason Perr
Systems Integration Consultant
Sr. Systems Engineer / Partner
MacHarmony
www.macharmony.com
213-268-1248 (cell)
[email protected]

Good job Jason. About time to you contributing back to the community that's been so good to you.
Now how do you get the Apple TV box to automatically query FCSvr directly?
Nicholas Stokes
XPlatform Consulting

Final Cut Server and Compressor / Qmaster serial conflict

On my Final Cut Server machine, i have Final Cut Server version 1.1.1. On my Mac Pro i have Final Cut Studio 7. I have installed Compressor and Qmaster on my Final Cut Server from the Final Cut Pro DVD, so i can use Qmaster (the version of Qmaster must match exactly on all machines). But the two serials conflict, Final Cut Server will not start due to the following problem:
"Either the current serial number is not valid or there is another server using the same serial number.
Check the serial number and then stop and start the server using the Final Cut Server Preferences panel."
Of course both serials is completely legit. Is it really true that i either need to downgrade Compressor and Qmaster (FCS will work, but Qmaster will not) or buy FCS 1.5? I have paid lots of money for this setup already, it can't be true that i am forced to update to 1.5.
Please Apple, a solution?

I have a similar case. Maybe someone knows how to solve it:
We installed Final Cut Server and on the same MacPro we installed Final Cut Studio.
After a while we dedicated this machine to Final Cut server and used the Final Cut Studio license on another nachine.
Now, if I want to change or add a transcode setting in the compressor, I'm getting the error message: 'conflicting serialnumber' or something like it.
So compressor thinks it's still part of th FinalCutStudio installation. But I don't quite understand, because Final Cut Server has its own compressor, isn't it?
How can I solve this without loosing the custom transcode settings I've made in compressor.

Final Cut Server 1.5 and QMaster 3.5.2?

I have a need to setup our Final Cut Server (XServe 10.5.8) to be the Qmaster Services and Cluster Controller with seven workstations to be clients submitting jobs and providing services to the cluster. The current Final Cut Server Qmaster is 3.0.5 on a 'server' subnet and the workstations will soon upgrade to Final Cut Suite 3 with Qmaster 3.5.2 on a different subnet.
What should be the solution for our environment considering the following issues if they are correct?
• Qmaster is 3.0.5 cluster and clients need to be on the same subnet?
• Qmaster 3.5.2 clients cannot service a Qmaster 3.0.5 Services and Cluster Controller?
• Final Cut Server 1.5 will not run with Qmaster 3.5.2?
We have just acquired Episode Engine to enable us to export Flash movies. Does Episode Engine provide some solutions for the above or just complicate clustering?

If you are running Final Cut Server 1.5.x, then Qmaster should be at 3.5 or higher.
Qmaster 3.0.5 was the correct version for Final Cut Server up to version 1.1.1 only.
~D

Long HDV and XDCAM clips through Final Cut Server

Hi,
I know that I could post this in Compressor and/or Quicktime and/or Leopard/Tiger Forums, but as this problem it`s causing my Final Cut Server to not working well, I think it makes sense to post here.
To resume: HDV and XDCAM clips (all on original codec, only xdcam transferred to mov in xdcam transfer) with file size bigger than exactly 4GB always FAILS in "Final Cut Server"/"Compressor alone in ANY machine installed from scratch"/"Anything that uses Quicktime". Source and Destination being localy or networked. DV or DV50 can get bigger than that, I`ve never seen this error with DV`s codecs.
I had seen this problem before I bought final cut server. When I was transcoding our interviews for transcription. We always worked with BETA SP and captured in DV or DV50. We were starting to go to HDV and now to XDCAM and this error has started to appear.
I have a "proxy" made a year ago from a HDV and it`s original has 8GB. I tried this file again and as I expected didn`t work. In ANY computer with any installations with only the latest updates. I`ve remembered that I was using Tiger at this time, and Quicktime/Tiger/ProApps had a old version.
My two cents are that some update from Tiger/Leopard/QuickTime/ProApps made this happen.
So ANY HDV/XDCAM file bigger than 4GB it`s FAILING in ANY system. (Tiger or Leopard, With or without FCP and QT PRO, Installed from scratch and updated every thing).
Some tests I`ve made:
-Compressor works with this two codecs to lower res in TIGER and with QuickTime Version 7.4.0 and LOWER. (had to be tested, but I think that was my version of QT when I managed to make the proxy of this two codecs).
-Compressor doesn`t work on any system with QT above 7.4.0.
-CATDV (http://www.squarebox.co.uk/) version 6 can make proxy versions of this two codecs in TIGER ONLY! They already know of this problem and CATDV 7 works on both.
-Compressing in compressor with H.264 (same codec as the FCSvr proxy) BUT without changing the resolution, size and etc. Works OK in both Tiger and Leopard.
-Exporting through QT works in ANY system BUT I loose TC, so it`s not an option (and I can`t input this workflow in FCSvr without using compressor).
-Exporting from FCP as QuickTime Movie with H.264 doesn`t work on Both (Tiger and Leopard).
-Exporting fro FCP as QuickTime Conversion with H.264 works but as exporting from QT I loose TC and can`t input this into FCSvr workflow.
Error message are always: "QuickTime error = -50" or "QuickTime error: corrupted data" (and of course it`s not corrupted because it`s used - even in FCP to edit - and opened viewed, catdv can do proxy and everything).
I`m surprised not to see anyone freaking out about this issue... I don`t think that It`s only me.
This is some problems that I came across while trying to find a solution:
http://www.paulescandon.com/blog/?p=39
http://discussions.apple.com/thread.jspa?messageID=4912265&#4912265
http://www.squarebox.co.uk/faq155.html
http://discussions.apple.com/thread.jspa?messageID=5513003&#5513003
http://discussions.apple.com/thread.jspa?threadID=1903644&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1780228
http://discussions.apple.com/thread.jspa?threadID=1853507
As you can see this is not the first time I`ve posted about this issue.
I`m sending a bug report as well.
Thank You all in advance.
Regards

Hi Chará!
We should, but I think the others will be disappointed eheheheh.
It doesn`t matter what version of Leopard I`m using (right know I`m using Leopard Server 10.5.6, but this issue has happened even with 10.4 if QT is updated and all updates of 10.5 up, as I`
ve mentioned above).
What file size are those clips that are longer than 10min?
I really don`t get, how it`s possible that just the two of us has HDV and XDCAM files with file size longer than usual? Maybe people that do interviews don`t like to record the entire interview and when capturing those clips would be under this file size limit? Or maybe we are the only ones in the whole world that transcode longer HDV and XDCAM clips (it`s funny that it doesn`t even need to be FCSrv, with only ONE machine and compressor this issue happens all the time).
I`m convinced that I have to install a Tiger version in a virtual machine with compressor and doesn`t update anything to test this further on. But I`m certain that with TIGER and CATDV this works ok! And I think that CATDV uses QT engine to do this transcodes.
This is too much of a mystery to me. Maybe it`s time to spend 24+ hours with apple in a international call and probably not getting anywhere.
I`m only posting this here in FCSrv forum because this issue it`s must worse when you have hundreds of clips with this issue and if you bought the package it doen`t matter if it`s a problem with QT+OSX or whatever, apple has to solve it for FCSrv use.
Do you reckon?
Let`s get in touch through email: lucas at rwcine.com.br
(at = @ and delete spaces).
Regards

Need advice on a workflow (mixing HD and SD on Final Cut timeline)

Hi
I'd love some help with the following. Thanks in advance.
I have shot full HD 1920 x 1080 24P PAL footage with the Canon 7D. I have also shot SD footage with the Canon XL2 (16:9, PAL, 50i).
I am using Final Cut Studio (Final Cut Pro 7). I am running FCPro 7 on a MacBook Pro and a Mac Pro (both intel).
What is the best set up (audio/visual set up) in Final Cut, before I bring in the footage? There are so many different set ups. When I export, how do I export? What settings do I use? If I want to export using compressor, what should I do in there? If I want to just make a simple DVD in iDVD, what do I export as from FCPro?
In the end, I want a high quality DVD. I realize I can't do a Blu-Ray disc because some of the footage is SD.
What is the best work flow? Thanks very much for the help. I really appreciate it.

interdiscipline wrote:
Here's the configuration we're considering:
Processor: Two 3.2GHz Quad-Core Intel Xeon (8-core)
*Don't do it!* Stick with the dual-2.8GHz config. A jump from that to the dual-3.2GHz gains you only an approximate 9% increase in power at a 52% increase in cost! Not worth it all. That money is much wiser spent on RAM, RAID array, or a broadcast monitor.
Memory: 16GB (4 x 4GB)
Hard Drives: 300GB 15,000-rpm SAS (for OS X, Final Cut, & other programs) plus 2 x 1TB 7200-rpm Serial ATA 3Gb/s (for video storage)
Graphics: NVIDIA Quadro FX 5600
We're thinking about spending the extra $1600 to get the best processor available, since we want this machine to be the hub of the business for about five years.
The processor is only one part of the whole, and as I just mentioned, the power:cost benefits are not good.
The graphics card is where we're most torn - specifically between the Quadro 5600, the GeForce 8800, or perhaps even getting the computer with the standard card (or no card) and getting a different third-party card. We do mostly DV now, but we foresee doing HD projects in the future.
Quadro 5600 is pricey, but I'm not sure about its benefits for people in our field. Even if I had the money for it, I would be hard pressed to consider it considering, again, money is liekly wiser spent elsewhere.
Also, it looks like we're gonna buy Final Cut Studio 2 and are considering also getting Final Cut Server. It seems the combination would allows us to use the Final Cut suite on other computers (both Mac and Wintel) that don't have their own version of Final Cut installed. Is that the correct interpretation?
I don't know much about FCServer, but my impression is that it is -- simply speaking -- Final Cut version of Avid Unity. In other words, I am pretty certain that your understanding on that is false. I may be wrong.

How can I check to see if my version of QuickTime Pro 7.6.6 already has ProApps QuickTime Codecs installed? I also have Final Cut Pro 6. I'm asking because my computer can't seem to play ProRes 422 codec video without stuttering or skipping?

I have a fairly capable MacBook Pro (2.93 GHzIntel Core 2 Duo processor, 4GB 1067 MHz DDR3 memory and a 1TB HD -5400 rpm, so I am hoping it's not that my computer that can't support it and it's something more simple like not have ProApps QuickTime codecs installed. Thanks in advance!

How can I check to see if my version of QuickTime Pro 7.6.6 already has ProApps QuickTime Codecs installed? I also have Final Cut Pro 6. I'm asking because my computer can't seem to play ProRes 422 codec video without stuttering or skipping?
If you can view a ProRes 4-2-2 video at all, then you either have the independent ProRes422 Playback component installed or the FCP "Pro" video components installed.
I have a fairly capable MacBook Pro (2.93 GHzIntel Core 2 Duo processor, 4GB 1067 MHz DDR3 memory and a 1TB HD -5400 rpm, so I am hoping it's not that my computer that can't support it and it's something more simple like not have ProApps QuickTime codecs installed.
Check your "~/Library/QuickTime" folder for your various "Pro" components. If in doubt that you have them all, re-run the FCP installer and it should add any missing components, apps, or utilities.

Re-install of Final Cut Server

I need to setup Final Cut Server 1.5 on a different server. When using the installation media, I get the following screen:
I am running on a Dual 2.8 ghz Quad-Core Mac Pro. The graphics card is a nVidia GeForce 8800 GT. Any help on this would be appreciated. Thanks!

Did you have it plugged in when the MacPro was started up or after?
Because I have tried with xServes and MacPros to attach monitor after it gives warning
with no luck.
In fact you CANNOT install with remote desktop in data center w/out KVM. Stupid.
http://support.apple.com/kb/TS1455

Re-installing Qmaster and Compressor on Final Cut Server

Similar Messages

Maybe you are looking for