Re-installing System Software, Then upgrading OS

I just replaced my Macbook Pro Hard Drive. I was about to begin the long process of installing the original system 10.4.6 (from when I purchased the Macbook Pro), then upgrading to 10.5 (which I purchased recently), then upgrading to 10.5.6 (downloaded online). My question is this, is there a benefit to starting from the original system install and then upgrading, or can I go right to 10.5? In the past, I think it was recommended to always start with the original system on other PowerPC and Powerbooks I have owned, maybe because of certain drivers or whatever. But I think I should be ok starting my installation with the 10.5. I just want to be sure I'm not missing anything by not using the original system CD (10.4.6) from when I purchased the Macbook Pro. Thank you in advance for the guidance.

The only things you won't have are the bundled software that came w/ your OEM Tiger. But you can use Pacifist (shareware) to install any extra programs you want that were on your OEM disk.

Similar Messages

  • CD drive doesn't work & I need to re-install system software

    I have an early 1st gen. MacBook Pro that has a bad CD drive. It doesn't work at all and I don't have an external CD drive. I need to re-install the system software for this MacBook Pro and I'm wondering if there is a way I can do it using my newer (late 2009) MacBook Pro. In this newer computer the CD drive works OK.
    Any ideas?
    (Sorry if this question has already been addressed. I did a search and couldn't find anything, but maybe I was using the wrong words.)

    Here's a tutorial for installing Tiger to a machine with no usable optical drive: How To- Installing Tiger Using FireWire Target Disk Mode.

  • Re-installing system software

    Please can some one help!!
    I'm re-installing all my system software but i'd like to keep all my internet and Email setting with all emails in my inbox. I have done this before but have forgotton. Please can someone refresh my memory.
    I'm reinstalling as no matter what I do I always get this message when trying to print "cannot open Printer" so the easy way is to re-install everything.
    G4 powermac   Mac OS X (10.1.x)  

    Do you use pop to get your mail? If you are on imap, all mail should be stored on the server. You can back mail and attachments in ~/Library. Preferences are in ~/Library/Preferences. Depends on your browser as to backing up your bookmarks - which one are you using? Is there and option to export them?
    If you are doing a complete reinstall I would advise you to image your mac first. http://www.bombich.com/software/netrestore.html is a very good imaging tool. You can create an image of your whole mac. Save it elsewhere and at least you know you won't have lost anything.

  • Can't Re-install System Software

    I need to re-install System OSX Tiger on a G4 Powerbook which has lost most of its desktop and user info -- including the Hard Drive icon, and it won't show the icon for the installer disk when I insert it. Obviously, I can't do the install like this -- and need help getting to it.
    This is serious for me -- any help greatly appreciated

    Booting From An OS X Installer Disc
    1. Insert OS X Installer Disc into the optical drive.
    2. Restart the computer.
    3. Immediately after the chime press and hold down the "C" key.
    4. Release the key when the spinning gear below the dark gray Apple logo appears.
    5. Wait for installer to finish loading.

  • Installing system software on a new hard drive

    I have a Mac book pro 2011.My install disk is snow leopard 10.6.4. ive tried numberous times from disk recovery and backups on an airport time capsule. nothing seems to work. it start loading and then either stops or asked me to restart and the cycle starts all over again. What im i not doing?

    If you have an Early 2011 model that originally came with Snow Leopard the disc you need is grey and says something like OS X system reinstall disc. It should be version 10.6.7, not 10.6.4. If the Snow Leopard disc you are trying to boot from is white that is a Retail SL upgrade disc and will not work on your model Mac.

  • Do I need to re-install Adobe software when upgrading from XP 32-bit to XP 64-bit?

    I have CS5 applications, and older Premiere/related (Audition2) software. I'm thinking for the CS5 applications, since they use 64-bit, I may need to re-install them after upgrading OS and RAM. Is this what I should do and is there a process I should follow?

    XP64 is long dead. What you are trying to do is utterly pointless, especailly since neither After Effects, Premiere Pro nor the 64bit version of Adobe Media encoder will run. Likewise, Photoshop 64bit will not/ may not be able to use hardware acceleration. Upgrade to Win 64 and get CS6/ Creative Cloud or just leave things as they are now. Everything else is a waste of time and money.
    Mylenium

  • Can't just install 6.0, must first install 4.8, then upgrade

    HI,
    Anyone else had this? I did a clean install of XP and installed 6.0 (thank goodness I have all install files since 4.7). However, though it installed okay, it left me with the problem of QT playing mp3 samples on websites, though I had all settings set to play them on my QCD player. BUT, when I installed 4.8 first then 6.0, the problem went away. ???
    Thanks

    well, i think i fixed it.
    i did some searching through all the apple discussions and via google and the one solution that kept cropping up was booting from the install DVD and running disk utility. after that, if verification or repair won't work, zero out your disk, then reformat it.
    i did it. now i am running in an almost completely naked OS X and its weird
    but, the problem seems to be fixed now. we'll see.

  • Re install system software

    I anted to reload my software as the computer is running extremely slow.  I started up  holding down the option key and "r" at the same time.  this has worked before but now it dosen't.  Can i reinstall from the app store are has the procedure changed,
    Thanks
    Dan

    Use the COMMAND-R keys.
    Boot Using Command+R keys:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "COMMAND" and the "R" keys together.
      3. Release the keys when the Utilities Menu appears.

  • What will happen to my previously installed software after upgrading mac to OS X Yosemite?

    I'm new to mac OS and I want to upgrade my mac from OS X Mavericks to Yosemite. I want to know if that upgrade would affect my previously installed software (e.g Wolfram Mathematica).
    Do I have to re-install those software after upgrading to Yosemite?

    When the installer is downloaded from the App Store, it is a good idea to make a copy of it with a different name and in another location from the Applications folder, as the original disappears after running.
    The installation will leave the user account intact, with your apps and files. However, not all apps will be updated for Yosemite and to save future problems it is advisable to go to the developers' websites and get the latest version, before you make the move.
    I see from Roaring Apps, that Wolfram Mathematica may not yet be ready for Yosemite.
    http://roaringapps.com/app/mathematica-home-edition

  • With Lion, How Can I Erase the Hard Drive and Reinstall The System Software?

    I plan on buying a used iMac with a Core 2 Duo so that I can run Lion.  Since Lion can only be purchased at the Mac App store what if I needed to erase my hard drive and re-install the system software.  How can I do this without a DVD with the OS on it like I have for Snow Leapard.  I suppose that I could boot from my Snow Leapard DVD and do the erase.  Then, I supposed I would be able to download Lion again from the Mac App Store without paying for it again.  But, how would you erase a hard drive and reinstall the system software when purchasing a new Mac with Lion already installed and no DVD at all with the OS on it?
    -- Kaydell

    When someone purchases any Apple computer with a DVD Drive, they should have recieved two DVDs... One contains the Operating System (up to Snow Leopard, Lion no longer ships on DVD) and the other contains the SYSTEM SOFTWARE (i.e. iLife and iWork). To install the software, they just insert the DVD with the SYSTEM SOFTWARE into any compatible Mac and run the installer. There is no need to erase the hard drive to install SYSTEM SOFTWARE. Maybe a friend can let you borrow the SYSTEM SOFTWARE DVD. The other option is to purchase the software via the App Store.
    FYI... App Store purchases are linked to the PURCHASER'S APPLE ID. So if you buy a used Mac from a friend and that Mac already has Lion installed on it,that Lion purchase is linked to YOUR FRIEND'S APPLE ID, not yours. So if you want to download Lion again, you will have to enter your FRIEND'S APPLE ID AND PASSWORD. You can always have your friend re-download Lion and make you a DVD copy.

  • HT201250 I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I

    I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I overcome this?
    I was already using 10.7. But only had the disc for 10.6.

    Sorry I am new to this. Am I in the right area? I am using my iPhone to make contact. I am worried.

  • Should I install old software in my new Mac Pro, then upgrade?

    I'm trying to transfer documents and apps from my PowerBook G4 to my new Mac Pro. I used Migration Assistant but it transferred only some files, no applications, no settings, even though I checked all those boxes. I've given up on MA. But here's the question: I have Office 2004, which I'd like to install so I can have Word on my Mac Pro, and then I would upgrade after installation. I've heard that pre-intel software can really slow down your intel computer. But what about starting with that software and then upgrading, so I don't have to pay for an entirely new MS Office? Same with Final Cut Studio. Any ideas about this would be appreciated!

    Lubella wrote:
    I have Office 2004, which I'd like to install so I can have Word on my Mac Pro, and then I would upgrade after installation.
    MS Office 2008 is an upgrade, not an update. It does not replace Office 2004. It is a separate installation. It is like upgrading from Tiger to Leopard except 2008 does not replace 2004 as Leopard replaces Tiger. You purchase the entire 2008 installation like purchasing the Leopard upgrade, but can have 2004 and 2008 running on the same machine without partitioning. I have both installed on my iMac.
    I've heard that pre-intel software can really slow down your intel computer. But what about starting with that software and then upgrading, so I don't have to pay for an entirely new MS Office? Same with Final Cut Studio. Any ideas about this would be appreciated!
    As far as I know, there is no discounted upgrade price from Office 2004 to 2008. I could not find it on their website anyway. I think to get Office 2008 you need to buy the Office 2008 installation disk.
    I think (might be just me) Office 2004 running in Rosetta is slightly faster than the 2008 version. All the applications in 2004 launch faster. In Excel 2008, entries into cells are delayed by a fraction of a second but 2004 has instantaneous entry (perhaps MS in their infinite wisdom thinks the delay is a feature).
    I am gradually changing over to 2008 only because it needs to be compatible with other computers in my office. If it weren’t for that, I would have stayed with Office 2004. Anyway, if you are going to buy Office 2008, you can install it and run it side by side with 2004 to see for yourself.
    I’ve also seen posts here about MS Office 2008 having problems with the Spaces application of Leopard. If you use the Office Toolbox (formatting palette) it has bizarre behavior when using Spaces.

  • How do I Restore from Time Machine after I have reinstalled my system software (Snow Leopard and then Lion) ?, How do I Restore from Time Machine after I have reinstalled my system software (Snow Leopard and then Lion) ?

    I have never done this before, so can someone explain in detail how I reintall my system software and then restore from Time Machine please ?

    Your profile indicates that you currently have an older version of Snow Leopard (10.6.2).  In order to install Lion, a prerequisite is the latest version of Snow Leopard (10.6.8).  Perhaps a few more details would be helpfull in solving your problem. ex. If all you want to do is to upgrade to Lion, a restoration of data is unneccessary.  Download the latest version of Snow Leopard and then download (purchase) and install Lion.  User data will remain intact.
    If I am missing something, please elaborate.
    Ciao.

  • OEM Pro, then upgrade or install Full Retail Ultimate 7 directly. W530.

    Hi.  I've calmed down a bit after the excitement of my first computer upgrade in a few years (went from T61p to W530).  Pretty happy with the W530.  In fact, very happy.  Wish Lenovo would have as much published info about the W530 as was offered for the T61p.  I think that info enhances the value of Lenovo's user's experience. Makes Lenovo a better value proposition.  Anyway...
    I have the (legitmate) OEM Windows 7/64 Pro recovery disks for my W530.   I want Ultimate (because of Bitlocker, and a few other features that are nice).   I have the UItimate Install disks (w/ legitimate key), but they arent' Lenovo OEM disks.  Ideally, I'd  install the OEM version (which has all the drivers installed) of Pro, then would use the Ultimate disks to upgrade.   If that works, that's what I'll do.  Alternately, I could just load Ultimate directly, then load update manager 5, and update my drivers and such. 
    The question is: is it ok (or even better) to load Ultimate directly, without the Lenovo OEM stuff?  Pluses, minuses?
    If I can't use the full version key of ultimate to do an upgrade, I guess I can troll eBay for an upgrade key.  Can OEM versions be upgraded?
    If it matters, the install is going onto a Samsung 850 Pro 500Gb SSD. 
    Thanks!
    Two W530s, i7-3820QM, 2.7Ghz, 500Gb Samsung 850 Pro, 1920x1080, nVidia K2000m/100m, Win 7 Pro
    T510, M540, 2.53Ghz, 1Tb hybrid drive, Win 7 Pro
    Two T61ps, T9500/T9300, 2.6GHz, 8Gb RAM, 256Gb Samsung 840 Evo, 1900x1200, nVidia 256Mb FX 570m, Win 7 Pro/Ultimate
    Solved!
    Go to Solution.

    If you're not going to use the Lenovo-provided 3rd-party software products (which mostly are lite or trial versions that you need to pay for anyway if you really want to use them fully-featured), or if you already have your own collection of 3rd-party products (both free and non-free) that you would be installing after-the-fact and using anyway on your new W530 no matter how you got whichever Windows version installed (and thus you'd probably be UNINSTALLING any "bloatware" from your delivered W530 in any case), just do what you want if you have a retail Ultimate and you want to use it.
    As a 2-year owner of a W530 (243852U, Win7 Pro x64, K1000M, 8GB memory) who 1 year ago replaced the original 500GB spinner with a 512GB Samsung 840 Pro and reinstalled "from scratch" using a retail Windows Pro x64 installation DVD rather than even considering using Lenovo's recovery media (which I never even kept in the first place!), my own feeling is that creating a "pure" self-installed Windows is amost always the way to start if you have a day or two... assuming you have a retail Windows installation DVD and your own collection of 3rd-party software products which characterize any machine setup that you build.
    I already maintain my own manually maintained collection of latest up-to-date drivers and Lenovo system products for the W530, as I am periodically checking for any recent updates on their W530 driver download site and maintain my own local folder of all of these installer files anyway so using them all if I had to start over from scratch is not an issue. Actually, I also use more recent versions of drivers from Intel and nVidia than Lenovo provides.
    In actuality, the ONLY piece of Lenovo-provided software I have SOMETIMES used is System Update installed on my machine.  This is actually a theoretically automated and accurate way of getting all latest drivers and other software needed by your own particular machine which have not already been obtained through standard Windows Updates anyway.  But in my experience the database referenced by System Update is not always up-to-date, and often lags somewhat from the actual W530 download site.
    Bottom line: I could have my W530 totally devoid of ANY Lenovo-provided system utilities and it would not affect me, but then that's just me.  I certainly have not used ANY of the Lenovo-provided 3rd-party software products, as I have my own collection of fully-licensed products that mostly all get installed onto all of my machines (desktop or laptop).
    Bottom bottom line: swapping a hard drive spinner for an SSD doesn't normally justify reinstalling Windows.  There's no licensing reason to reinstall (i.e. a new hard drive/SSD is an allowable upgrade to continue using the same instlaled Windows with the same license key).  So you can just use one of many products to "clone" your existing partition(s) to your new drive (e.g. Macrium Reflect, Minitool Partition Wizard, even the Samsung-provided cloninig software, etc.).  Or, if both drives aren't available simultaneously you can just do a 2-step equivalent, by taking a "system image backup" of the existing environment out to an external USB 3.0 backup drive, then swap internal drives, and then do a "system image restore" from the external backup drive to the newly installed internal hard drive.  Of course if you really wanted a new version of Windows (e.g. Ultimate, in your case), then a reinstall from scratch is the course you must take since I don't think OEM licenses for a given Windows can be upgraded (but I may be wrong).
    NOTE 1: even if you were to just clone your current spinner-based Windows onto the SSD, avoiding the Ultimate install for now, you'd still want to run Samsung Magician to "optimize/tweak" Windows for SSD performance since it had originally been installed as intended for spinner performance. There are some additional tweaks you should probably look at to get the most out of SSD.  And Samsung Magician provides (a) rapid mode, and (b) over-provisioning, for still more SSD performance.
    NOTE 2: Lenovo also provides a "driver grabber/updater" set of utilities for System Admins, which is like System Update but more under your control and is intended to maintain a folder of drivers/utilities (exactly as I do myself manually, without any assistance from the Lenovo software).  But again, it's based on the same database that System Update works off of, so even it can lag behind what's actually available directly on the Lenovo W530 driver download site.
    Sorry if this is providing unnecessary information to you.  But I've gone through several such spinner->SSD upgrades, or in the case of several M93p desktop machine configurations for friends and family, have ADD'ed an SSD as a second drive (to become the primary boot/system drive), retaining the original Lenovo-provided spinner but repurposing it to become a secondary data drive.
    In the case of these M93p situations, I opted to "quickly and easily just clone" the existing Lenovo installed Win7 from spinner to SSD, and avoid having to reinstall Windows from scratch onto the SSD (also avoiding Windows and driver updates, reinstall of 3rd-party software and Windows customizations, etc.).  In the case of my own W530, I instead opted to reinstall from scratch onto the newly installed SSD, using the opportunity of the hardware upgrade to truly "build my own Windows" and not have any leftover pieces from Lenovo other than what I chose to manually reinstall myself.

  • Installing 10.2 error message at processing essential system software.

    Due to some type of software glitch I have had to reinstall my OS X software. I am able to make it to certain parts of the install before I am given the "error installing software, please try again" The furthest I am able to go is about 20 % in at the "processing essential system software" warning. It then quits out on me. Sometimes it doesn't even get that far. Any help would be appreciated....
    Thanks,

    Welcome To Discussions tbedard!
    Your computer specs state that you are using 10.0.x, and your Topic title refers to 10.2. So can I assume that you are doing an upgrade?
    Do you have a backup?
    Which Mac model are you upgrading?
    What size is the Hard Drive, and how much space is available?
    How much RAM is installed, and is it original or added?
    What type of upgrade are you attempting? Erase & Install, Simple Upgrade, or an Archive & Install?
    Did you install a Firmware Update, if one is available?
    Are you using the Full Retail Version, of the Jaguar Install CD?
    Does the Mac meet the Jaguar System Requirements?
    -Power Mac G3 or G4, iMac, eMac, PowerBook G3 or G4, or iBook computer
    -128MB of physical RAM
    -Supports all video cards shipped by Apple on Mac OS X-compatible systems. Quartz Extreme functionality is supported by the following video cards: NVIDIA GeForce2 MX, GeForce3, GeForce4 MX, or GeForce4 Ti; Any AGP-based ATI RADEON card. A minimum of 16MB VRAM is required.
    -QuickTime Pro functionality requires a QuickTime 6 Pro key. The QuickTime 5 Pro key will not work after this software is installed.
    -DVD Player requires a DVD-ROM equipped Macintosh with built-in FireWire.
    ali b

Maybe you are looking for