Re-installing windows 7 hp-pavilion dm1-3200sd

Hi all!
For over a year I've been very happy with the performance of my hp-pavilion dm1-3200sd, but I'd like to make an upgrade to an SSD, because my netbook will then get more snappier!
I actually have one question: how do i re-install Windows 7 correctly on my SSD? The SSD I'm looking to buy is the Samsung 830 Series laptop upgrade kit, with usb-sata cable. I've already seen a partition D named "recovery", but when I will put in my SSD, the partition will be gone (since partition D: is on the original HDD).
So (I think) that I have two choices right now:
- Copy the recovery partition to an USB flash-drive, install the SSD and then boot from USB and install Windows 7 to the SSD.
- Connect the SSD via USB to my laptop, then copy the recovery partition to my SSD. After that I install the SSD in my netbook, and then install Windows 7 to the SSD.
Is there a much better option out of the two stated above? Will these option bot work? And last but not least: after installing Windows 7, does it activate automatically?
I'd like to do install a fresh Windows 7, so there is no need to back up any programs, settings or documents.
Thanks in advance!
Bastiaan, Netherlands

Similar Messages

Blue Screen of Death After Trying To Install Windows On Pavilion ze4900?

After my hard drive died in my Pavilion ze4900, I replaced it with another notebook hard drive I had laying around.I also tried installing Windows XP home from a Windows installation CD, the same OS the laptop had before the hard drive died. All went well until the laptop was done loading all the installation files, instead of giving me the option to either install Windows or repair Windows, the laptop ends up showing me a blue screen with the message: " A problem has been detected and windows has been shutdown to prevent damage to your computer." What can I do to resolve this issue? I have installed Windows XP on another computer using the same CD, so the CD hasn't gone corrupt and the replacement hard drive is barely used. Any help would be greatly appreciated!

, Hello and thanks for posting on the HP support forums. The first thing you will want to check is if there are any issues with the hard drive you put in. Run the BIOS diagnostics for the hard drive and the hard ware to make sure there are no issues. HP Notebook PCs - System Diagnostics (F2) And. HP Notebook PCs - Testing a Hard Disk from the BIOS Please let me know how things go. Thanks again for posting and have a great day.

Volume lowered after installing windows 8 pavilion g7

Hi,
I have Pavilion g7-1317cl Notebook PC
After installing windows 8 the volume level lowered, i tried going to the speakers and then Enhacment and check the loudness equilizer and the volume got up alittle but still lower than normal, How to get it to its normal level....?
TheOrion055

I'm not sure what notebook you have, but you can try this:
Right click the speaker icon in the Taskbar and select 'Playback Devices'.
Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button.
Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'.
Click Apply to save the change and then click OK in all remaining windows.
Please let me know if this helps. If not, please reply with your product number & operating system.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Play external DVD's on windows 8 Pavilion DM1

I have an external DVD player with HDMI or Scart connectors and have tried to play DVDs thru my Pavilion DM1 notebook but have been unable to see any recognition of the HDMI connection. Looking at other posts I think the HDMI may be out only.
Is there any work around ?

Fawkesy wrote:
Its a Digilogic with HDMI, AV connector (rgb)-tv, plus video yellow , audio red R and white L and co axial sockets.
Cheers
Hi,
It is not designed to use with computer. You need more hardware to go with it. Much better to buy something like one of the following external optical drive, will be much cheaper
http://www.officeworks.com.au/shop/officeworks/technology/computer-accessories/cd-dvd-drives
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Pavilion dm1-4310nr Notebook - Windows 7 or Windows 8 32 bit support

I need to install a 32 bit OS unto the laptop - is there support drivers available?
My situation is thus, I am working on Afghanistan and had used a HP Mini to travel with in my back pack. After landing at a base, my backpack got ran over by a Gator, destroying my laptop. While in Bagram I picked up from the PX a HP Pavilion dm1-4310nr, the only sub 13 inch available, unfortunately all of my software and drivers I use for my job work on a 32 bit OS.

Hello InAfghanistan,
Unfortunately, not. Only Windows 8 64 bit drivers. I wish I had better news for you regarding this.
Thank you for your service.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Ipad mini 32 and can't connect to my HP Pavilion DM1 windows 8 via bluetooth

Just got a new Ipad mini 32 and can't connect to my HP Pavilion DM1 windows 8 via bluetooth. I get to the stage where you have to confirm on both systems the generated code and then it goes in error. Not supported. Any clue ?

Unless you have an iOS app that uses BT for a specific purpose, such as file transfer, BT on the iPad alone, as stated, does not support it.

Can't install Windows 7 or Windows server 2008 R2 on my HP Pavilion - 17-f240nf machine

Hi everybody,
I just bought my new HP Pavilion - 17-f240nf Notebook laptop, that comes with Windows 8.1. When I tried to install Windows 7 or Windows server 2008 R2, i received the following message : "A required CD/DVD drive device driver is missing ..."
I tried many solutions gave on internet, but i didn't find a solution to my problem.
Please I need your help.
Thanks.

Hi,
Please read through this MS KB article regarding this issue.
This issue occurs for one of the following reasons:
The installation DVD is removed during the setup process.
A low-quality DVD was used to create the installation DVD.
The speed at which the installation DVD was burned was too fast.
The DVD drive cannot read the media.
The ISO file is corrupted.
To resolve this issue, use one of the following methods, as appropriate for your situation:
Burn the installation DVD at a slower speed.
Use a better quality DVD to create the installation DVD.
Update the BIOS firmware for your DVD drive.
Use the Windows 7 USB/DVD Download tool to create a bootable USB flash drive, and then use the USB flash drive to install Windows.
To troubleshoot this issue, use one of the following methods, as appropriate for your situation:
Run the DVD on a different computer to determine whether the DVD works correctly.
Test your DVD drive by using an official Windows installation DVD.
Attach the ISO file to a virtual machine to check whether it is corrupted.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

HP Pavilion DV6 3122TX recovery partition deleted, need to install windows

Hi,
I have a Pavilion DV6 3122TX notebook. The system would hang profusely when ever I was accessing any file, no it was not a virus or anything, I found out it was the HD due to error screen at startup "Hard Disk Error, Hard Disk 1(3F1)", I ran all self checks and diagnostics but nothing improved. So I formatted the drive completely deleted all partitions even the internal recoveries and others (my bad).
My recovery disc cannot be read by the laptop, the DVDRom LED blinks for a few seconds then nothing happens, "It says invalid system disk. Replace the disk, and then pres any key blah blah blah ..." The disc is fine I have checked. I changed the boot options to boot from internal CD/DVD.
I need a working windows as a temporary solution as quickly as possible. I cannot install Windows 7 apparently this is due to some lock (turns out it was unable to detect the HDD). Windows XP cannot see the drive due to AHCI driver requirement (can't switch back to IDE) due to BIOS lock. So I tried the AHCI driver slipstream method, now here's my problem I can't find the proper AHCI drivers for my laptop since I cannot login to Win to check with CPUz. Can someone direct me to the right text-mode drivers for this laptop to slipstream into winxp x86 using NliteOS. I'll take the laptop to be fixed to a service centre next month but now I need a solution. Even if you can fix my recovery solution it would be great.
I can access the hard drive using Linux. So the HDD is ok, please do not refer me to change the HDD that is not an option right now. (HDD was the problem)
Sorry for such a long post
Thanks in advance..
This question was solved.
View Solution.

Hello again!
It is possible that you can still create the media. Just follow these instructions and let me know the result.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Sound quick launch button doesn't work when i installed windows 8 in my hp pavilion dv3z notebook

1. Product Name and Number
hp pavilion dv3z notebook pc
2. Operating System installed (if applicable)
windows 8
3. Any changes made to your system before the issue occurred
installed windows 8
when i installed windows 8 in my hp pavilion dv3z notebook pc, the quick launch button of volume is always red and the sound is mute....the driver for quick launch buttons and driver for sound is also up to date....can you please help me?
This question was solved.
View Solution.

When installing the audio driver, was it installed by following the prompts or in compatibility mode as outlined here?
Based on the Software and Drivers page for this unit, the unit was not tested and certified for Windows 8. This means that some functionality may not be the same since the unit was not designed for Windows 8. See this site for information and to find out if it has been tested for Windows 8.
If the sound driver has not been installed in compatibility mode, then I recommend using the Windows 7 64bit driver found here and using the linked steps above to install it in compatibility mode.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Recently installed Windows 7 on Pavilion dv6748us - internal microphone does not work

Hi,
sojo972 wrote:
I have been searching the web extensively, without success, to find how to resolve this issue.
I recently installed Windows 7, 32 bit, on my wife's HP Pavilion dv6748us laptop. Now her internal microphone does not work.
Have gotten some "roadside" advice to use a Windows Vista driver; Have no idea what the driver is or how to get it.
Have found some information about uninstalling realtek audio driver and reinstalling an older version; Have no idea on this one either.
Would really appreciate a definitive answer with a positive result.
Thanks for all help.
The drivers for the laptop are located here. select Vista and Driver-audio. The Vista driver should work. You can uninstall the driver from within the Device manager. Start --> type devmgmt.msc and the device manager will open. Locate the HD audio device and right-click it and update the driver.
After that is done go to Control Panel and Sound and the recording tab up top. Check to see if the microphone is grayed out. (not grayed out means driver is properly installed). The microphone should also have a green checkmark next to it. It is now a matter of selecting the microphone then selecting Properties to enable the microphone and then test and adjust the input level. Look at the tabs (listen,levels and advanced).
Had you considered trying Windows update or the Realtec website as a drivers source?
regards,
erico
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Hi:
Looking at your system information you could have one of two possible audio cards:
Conexant HD audio or the RealTek HD Audio
The fact that you couldn't install the RealTek HD audio driver indicates to me that you don't have a RealTek audio card. Check your device manager and look at your sound card and check to make sure which audio card you have.
Here is the Vista 32 bit driver for the Conexant audio card:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Here is the Vista 32 bit driver for the Realtek audio card:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
If you in fact have the Realtek audio card, I would download and install the latest, greatest HD driver directly from the RealTek site:
Accept the agreement, download and install the first one on the list. Maybe it has been updated to fix the issue you are experiencing.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
Paul

Pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate

pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate
after installing windows 7 my computer only displays the LAN on my quicklaunch bar and I can even search for open WLAN networks =(

Hi:
You probably need to install the wireless card driver.

Windows 8 possible to install on HP Pavilion h8-1030nl

Hi, I would like to know whether it is possible to install windows 8(.1) on my desktop computer HP Pavilion h8-1030nl ?
thanks for answers

There is a program that will test your entire system. Be sure to have every device connected, and powered. It will analyze everything connected, and all your installed sofware. Neat huh?? So here goes, and enjoy. The program.
Now the question to you. WHY? Windows 8/8.1 is under so much turmoil. WIN9 has been scrapped. I suggest you google "WIN 10" and read all about it. It's a better scenerio. More on it later, for sure. See here.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Installing windows 7 drivers on the notebook pavilion g6-2400ca

Hi,
i just installed windows 7 instead of windows 8 on my notebook pavilion g6 2400ca, and i'm missing some drivers.
Here are the needed drivers, can you help please?
Bluetooth controller:
PCI\VEN_1814&DEV_3298&REV_00
PCI\VEN_1814&DEV_3298
PCI\VEN_1814&CC_0D1100
PCI\VEN_1814&CC_0D11
PCI\VEN_1814
PCI\CC_0D1100
PCI\CC_0D11
Network controller :
PCI\VEN_1814&DEV_3290&REV_00
PCI\VEN_1814&DEV_3290
PCI\VEN_1814&CC_028000
PCI\VEN_1814&CC_0280
PCI\VEN_1814
PCI\CC_028000
PCI\CC_0280
Ethernet controller:<
PCI\VEN_10EC&DEV_8136&REV_05
PCI\VEN_10EC&DEV_8136
PCI\VEN_10EC&CC_020000
PCI\VEN_10EC&CC_0200
PCI\VEN_10EC
PCI\CC_020000
PCI\CC_0200
Unknown device:
ACPI\HPQ0004
*HPQ0004
PCI device:
PCI\VEN_10EC&DEV_5229&REV_01
PCI\VEN_10EC&DEV_5229
PCI\VEN_10EC&CC_FF0000
PCI\VEN_10EC&CC_FF00
PCI\VEN_10EC
PCI\CC_FF0000
PCI\CC_FF00
WD SES Device USB Controller:
USBSTOR\Other
USBSTOR\RAW
This question was solved.
View Solution.

Great !
Many thanks !!!

After installing windows 7 on my hp pavilion dv4000, the audio and vga caase to work. help me

after installing windows 7 on my hp pavilion dv4000, the audio and vga case to work. help me with a recommended sound and audio drivers for windows 7 operational system. Please
This question was solved.
View Solution.

Hi:
Please click on the devices in the device manager. Then click on the details tab. In the properties drop down list, select the second item (Hardware ID's). Post the top string of characters you see for each device.
Those will identify the model devices you have and I can try and find the drivers for them. Is it Windows 7 32 or 64 bit you have installed?
Paul

Installing windows 7 on hp pavilion g62228dx

it is possible to install windows 7 on my hp pavilion g62228dx??......
and get the drivers for it also.....because im not happy with windows 8.1
i await your imidiate relpy\............

****Disclaimer*****
HP doesn't recommend the installation of Windows 7 on a computer shipped with Windows 8, nor will it support the installation of Windows 7. HP may not provide Windows 7 drivers and suitable drivers may not be available for the hardware in the computer. Also, Windows 7 may not support some of the hardware or software features designed for the computer.
Make sure you create your HP Recovery Discs or USB Flash Recovery media before modifying or changing ANYTHING.
You will need to purchase a copy of Windows 7 with a vaild Microsoft COA and product key.
The screen shots below are from an HP 15t-j100 notebook computer... the options and configuration screens on your computer may differ.
You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "BIOS Secure Boot configuration" on the settings page similar to what is shown below, before you can attempt to install Windows 7;
After saving the changes, the computer will request that you confirm the changes... Accept the changes by typing the four digit code and pressing the "ENTER" key.
If are you are installing from a USB stick and see a "Load Driver - a required CD/DVD drive device is missing" message, this is because "System Configuration" > "USB3.0 Config in Pre-Boot" is set to "Enabled". This must be set to "Auto". This should clear up the CD/DVD device missing.
Additionally, as the hard drive is most likely partitioned as GPT, you must boot using the UEFI-Internal CD/DVD or UEFI-USB Key/Drive to install Windows on a GPT partitioned disk. Turn on or reboot the computer and tap "F9" or "ESC" and then "F9" when prompted. Highlight the UEFI boot source you are using and press "ENTER".
I suggest using Windows 7 SP1 for the best intallation experience. If you need Windows SP1, please see "How to Install Windows 7 Without the Disc" to download and create your own Windows 7 SP1 disc. If the DVD refuses to boot as UEFI, you may need to use a USB Flash drive (may require DISABLING "Fast Boot" in the BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid UEFI enabled USB Flash drive if it is formated as NTFS and may require a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installer, or WiNToBootic. I like Rufus, as it has options for "GPT partition scheme for UEFI computer" and "FAT32".
From the top...
1) Turn on the computer and immediately start tapping the "ESC" key.
2) When the MENU comes up, press the "F10" key.
3) Navigate the BIOS to "System Configuration", "USB 3.0 Config in Pre-OS" and set to "Auto".
4) Navigate the BIOS to "System Configuration", "Boot Options" and set "Secure Boot" to "Disabled" and set "Legacy Support" to "Enabled".
5) Press "F10" and click "YES" to "Exit Saving Changes"
6) Computer should restart and display "Operating System Boot Mode Change"... type the four digit code and press "ENTER".
7) Let Windows 8 boot-up and place the Windows 7 SP1 media in the DVD drive or USB port, then log-off / shutdown.
8) Turn on the computer and immediately start tapping the "ESC" key.
9) When the MENU comes up, press the "F9" key and then select the correct UEFI boot source (Internal CD/DVD drive, USB CD/DVD drive, USB Flash drive, etc.)... Press any key to boot CD/DVD, if prompted.
10) Select "Language", "Time / Currency", and "Keyboard" settings and then click "Next"
11) Click "Install Now"... check "Accept Terms" and click "Next". Click "Custom (Advanced)".
12) You may need to supply AMD SATA/RAID drivers at this time... Download AMD Chipset Drivers (Chipset / AHCI / USB 3.0)
13) Follow all prompts and answer all questions as needed. Enter a valid Windows 7 key when requested.
14) Please install the AMD Chipset Drivers and the Windows 7 64-bit drivers from the HP Pavilion g7z-2100 CTO Notebook PC Drivers page. Post the Windows Device Manager's "Hardware Ids" (just the text) for all remaining missing or unknown devices, as shown in the example below;
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Re-installing windows 7 hp-pavilion dm1-3200sd

Similar Messages

Maybe you are looking for