Re iphoto: when I double click on a thumbnail i get e grey screen with exclamation mark..can't access my photos to edit, order prints etc
Was wondering if anyone can help...I am not very computer friendly but want to be able to edit my photos, use them as jpegs, order prints etc. When I double click on a thumbnail ( am presuming the thumbnails are the small photos ) I get a grey screen with an exclamation mark on it. I cannot drag the thumbnail onto the desk top it just pings back. This doesn't happen with all the thumbnails and has been a problem since we upgraded to snowleopard. I recently reinstalled photos from the memory card from my camera and they are alright. I am presuming that the old photos are stuck in there somewhere if only I knew the right buttons to press to get them out. Thanks, Jane Thomas
Easiest: Restore from your back up.
Otherwise:
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Similar Messages
-
What do I do when I power up the computer and get a grey screen with a folder icon and a question mark?
vickyfromosseo wrote:
What do I do when I power up the computer and get a grey screen with a folder icon and a question mark?
Read this: A flashing question mark or globe appears when you start your Mac -
When I double click on a thumbnail, a black screen with a ! shows up. why is this happening??????
In I Photo, when I double click on a thumbnail to enlarge it, a black screen with a ! appears. Why is this happening?
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
After upgrading to Maverick, when I double click on the attachment I get this message "...could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try saving in a different location." It happens for all types of files.
Any suggestions as how to fix this?
I'm on a Mac OS X 10.9.3 with Thunderbird 24.5.0Thunderbird > preferences (I think on a mac) and under attachments set the folder
-
I can see the pictures in iPhoto but when I try to open a picture I get a grey box with a big !
I can see the pictures in iPhoto but suddenly this morning when I try to open a picture I get a grey box with a big "!" Please help!
You really should run check for updates. It's up to 9.1.3 now.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
Lightroom 2015 version on creative cloud I am getting a blue screen with x mark when i am switch from library to develop mode
Hi Chandan,
Kindly try the below mentioned link.
Adobe Photoshop Lightroom Help | Lightroom GPU FAQ
Please share the results once you have tried the steps.
Thanks,
Atul Saini -
I have a new Dell Inspiron 15R. I closed it without shutting it down and when I tried to start it up I get a blank screen with my cursor. What's wrong.
You may get a reply here but it's best to post a question in the columns it naturally belongs to; in this case Dell forums.
-
When I turn on my Mac I get a grey screen with a folder with a question mark . Have tried the disk utility to no avail as the disk has apparently dismounted and will not mount even though the mount option is available. I have recently upgraded from snow leopard go os x maverick
This could be a software/state problem or a hardware problem. In your case it sounds like the latter but you should try the steps below in case it might help.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570 -
When I double click on a photo opened in events I get a black question mark in stead of the big photo.
subsequently the slide show does not show pictures. I hope anyone knows if I have may be changed a setting?Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair Library permissions
Regards
TD -
MacBook won't start - gets to grey screen with clicking noise.
I think I know the answer to this one - my hard drive is fried. But before I head to the Apple Store I'd thought I'd see if anyone else had any ideas of what I can try.
I was happily surfing the web when my computer froze. I could move the mouse cursor, but everything else was unresponsive. Opt-Cmd-Esc would not work, so I had to force a restart with the power button.
The computer restarted, I got the Apple chime, but then all I could hear was a clicking. I've tried restarting several times, but to no avail.
I've also tried:
Attempting to boot into a BootCamp partition.
PRAM reset.
Boot into safe mode.
Boot from my Leopard disk (spins up, but then ejects).
Boot from my original MacBook disk (spins up, but then ejects).
Boot into target mode.
The best I've got is a flashing folder with a question mark, mostly I'm just getting a grey screen.
Can anyone else offer any ideas to try?
And, assuming I have to return it (it's under a year old), what is the story? Do I just get a replacement, or is it sent off for repair? Do I need my receipt, or can they verify ownership from my credit card/serial number? Do I need a Genius Bar appointment, or do I just show up?
Sorry for all these questions, this is the first real problem I've had with a Mac and it's come at exactly the time I need to have a laptop!That happened to my macbook too!!!!
I emptyed my trash can, it had over 1000 items there and it took a really long time to erase all of them. Eventually it was done. I turned it off, went to bed, next morning, my reliable Macbook would not start! Grey screen, apple logo, a spinning wheel. i can hear some clicking mechanical sound.
I loaded my installation cd, pressed C key while starting. It did loaded the cd, followed the screen of installation... It failed the first time, aborted half way. I had to do it again. Second time, it did go through without issue. But now, it always takes WAY long to boot, the system is very slow, very unresponsive, I am very scared to shut down the system, i dont know if next time it will reboot again.
My macbook has been very stable and reliable, compared to my PC and Dell notebooks. It is only 1.5 year old, It is not under warranty anymore. I guess it is hard disk problem most likely. There is not even one Apple Store in Idaho. Should I go out of state to fix it? how much will it cost? I have been a long time PC user and i can fix it myself if it were a PC, I love apple but really have no idea when it has problems. -
I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further. I have tried the diagnostic test but nothing was found.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
When I restart my iMac it is stuck in the grey screen with spinning circle
When I restart my imac (less than 1 year old) it won't start up. I get the grey screen and spinning circle and it never moves beyond. A few times in the past, I've tried to reset the PRAM and that has worked. However, its not working this time. Nothing seems to restart the computer.
Hi,
The Recovery HD I believe is the Internet Recovery feature found in most 2010 and 2011 Macs. Another poster in this topic suggested taking a look at an Apple support article regarding this issue. A solution may be found there that may work for you. If all else fails, I'd recommend you contact AppleCare. Unless you are within 90 days of your purchase (which isn't the case for you) you'll either need to have the AppleCare Protection Plan to call AppleCare over the phone, otherwise I'd suggest taking your iMac to an Apple Retail Store. Could be inconvenient doing that, though, considering the iMac is not exactly portable. However, the Apple technician will (presumably - just guessing) do various initial hardware tests on the machine and hopefully resolve the issue for you.
By the way, the Internet Recovery feature (Recovery HD) allows you to restore Mac OS X in the event you have misplaced your installation discs, for example. The Internet Recovery feature can also be activated at boot up by pressing the Command (Cmd) key and the R key afterwards (while keeping the Cmd key pressed down). -
<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/766710]</blockquote><br>
I have to double click on Firefox icon a secound time to start it. Why does Firefox go up on screen and then disapear? I do not get any crash report page.See:
* http://kb.mozillazine.org/Browser_will_not_start_up
* [[Firefox crashes when you open it]] -
When I boot up my I get a grey screen with a flashing folder with a question mark
I was trying to set up a bootable Linux flash drive for another computer using UNetbootin and I accidentally selected an empty partition on my hard drive instead of the USB I was trying to use. It went through the install process, and I didn't realize it was on my computer rather than the USB. The computer worked fine, so I thought nothing of it.
Today, I go to mess with my computer and it is frozen at the login screen. I restart it, and now I just get a blinking folder with a question mark. I try to go into recovery, but it isn't there. Internet Recovery works fine, but when I go to use Disk Utility or to reinstall the OS it cannot find the internal Hard Disk.
What am I supposed to do here? I don't want to lose all my data.greenbil1
You can contact AppleCare to buy a replacement set of the oringinal Install discs for a nominal cost. You will need the serial number and a credit card to place the order. -
This problem occurred shortly after updating to Firefox 5.0 I kept getting reminders to update to 5.0 When I finally decided to update, the first 4 or 5 attempts failed for one reason or another always with a different error message At some point after and extended shutdown of the computer 5.0 was initiated.
The updater wasn't able to update all the files and some were left as older versions.
You need to do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
Maybe you are looking for
-
Hi, I'm in Nova Scotia, Canada and when I try to use Siri it loads and loads and then says, "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while." I rebooted and it didn't fix the problem. I just g
-
I am new to PSE 12 and am trying to import my photos from folders on my desktop which I have organized by the categories I had in my previous program (Creative Memories). Many of my photos are located in multiple folders, i.e. one photo could be in
-
Wanted to reach out to the community to see if anyone else is experiencing this issue. We have tried to work an SR on it, but just have not been getting anywhere w/support. We recently upgraded from 11.1.1.6 to 11.1.1.7. When using a SSL connection
-
Just asked same question in iWeb forum. I would like to have several friends access a bunch of photos on the internet and each must access a specific bunch of pictures with a password. Each bunch is about 400 to 600 pictures of about 100kb each. It m
-
I'v also moved my library to an external hard drive as I'd run out of space. I don't know if this has caused the problem. Any advice appreciated.