Re: is it possible to create informatica visio template for sales force soruce and target objects.

We are using Informatica PowerCenter 9.1 HotFix 1 with PowerExchange for Salesforce.Do Cloud Mapping Designer requires seperate license? We do not have Informatica Cloud license.

Hi Amol, Thanks amol for quick reply. i have created visio template as per your comments. at the time of validating the template it was showing error. Please find the below error. Thanks,Munisekhar N

Similar Messages

Is it possible to create informatica visio template for sales force soruce and target objects.

Hello Anmol, I have a similar requirement where I need mass generation of mappings using Salesforce Objects as a source. As per your instruction, I used cloud version of Mapping Architect of Vision and create a template with normal source and target and Application Source Qualifier. I also mentioned Salesforce as the database type. However, when importing into Informatica PowerCenter Designer, it shows all other sources except for Salesforce sources. Can you please help me out. RegardsManish

Hi Munisekhar, Yes it is possible. In most cases it will be easier to create such a template directly in Visio. If you need to get the mapping from PowerCenter into Visio, make a copy of the original mapping and replace the Source, Target and ASQ (Application Source Qualifier that you link the source to) with a relational or a flat file source, target and SQ respectively. Then import it in Visio. Make sure to change the source, target and SQ again back to Salesforce specific objects. So when you import such a copy (that used relational or file objects) in Visio, do the following:1. Edit the source definition and change the Database Type to Salesforce2. Edit the target definition and change the Database Type to Salesforce3. Remove the object SQ (linked from source)4. Drag the ASQ object icon from the Informatica stencil and link it the same way the SQ was linked earlier. That should validate and work fine. Let me know if you still face any issues. Note: You might already be aware of this, but you use the standard SQ transform/object when you use a relational or flat file source, and use an ASQ transform/object when you use application sources like Salesforce. While doing this, make sure to retain your original mapping in PowerCenter so you can start from that again if you need to. Thanks and regards,Amol

Is it possible to create many primary key for a table?

hello sir/mam.
i am selva, i am new to abap,
is it possible to create many primary key for a table?
please guide me.

Hi Selva,
Many Primary Keys = Composite Key.
i.e some set of columns will enable you to identify a unique row from a set of rows in the table.
This can be achieved by checking the primary key check box in se11.
Hope it helps.
Regards,
Maheswaran.B
Message was edited by: Maheswaran B

With adobe standard, is it possible to create a fillable document that can be saved and used repeatedly as a fillable doc

with adobe standard, is it possible to create a fillable document that can be saved and used repeatedly as a fillable doc

Hey Paul,
Please let me know what version of Acrobat Standard are you using.
Regards,
Anubha

Possible to create a custom renderer for rendering standard component ?

This is in context for creating dynamic Data tables. Is it possible to create a custom Renderer for rendering component (standard) without creating a custom component?
namanc

Let's assume you want to create a custom renderer which will be used to render the error-messages (the h:messages tag). The component-family in this case is: javax.faces.Messages, the renderer-type javax.faces.Messages.
Therefor in your application's faces-config.xml add this renderer-statement (inside a render-kit, obviuosly):
<faces-config>

<render-kit>
    <renderer>
      <component-family>javax.faces.Messages</component-family>
      <renderer-type>javax.faces.Messages</renderer-type>
      <renderer-class>my.very.special.MessagesRenderer</renderer-class>
    </renderer>
</render-kit>

</faces-config>The code for MessagesRenderer is very dependent on your needs, therefor I will not post something here. Basically you need to extend javax.faces.render.Renderer. For help in that camp, surf to the online tutorials or get yourself a book (I learned a lot from Kito Mann's "JSF in Action"). Additionally grab the source for Sun's RI AND Myfaces and dig into that java-code. There is a huge learning potential looking at that source-material.
hth
Alexander

Is it possible to create an inbound delivery for STO in a 2 step process ?

Hi Experts,
Is it possible to create an inbound delivery for STO in general (how do I get a vendor for a Plant. I have already assigned a plant to my vendor in vendor master - additional purchasing data, but it does not seem to work).
In particular if I want to create an inbound delivery in intra-company plant STO scenario, how do i do it?
Let me know in case if that is not possible.
Thanks,
Nitin

Hi Tao,
I did that also, but it did not work.
Finally I had to debug, and found that the for the document type UB (intra-company transfer) i should make the customizing setting which makes the vendor data to be considered. (Table T161).
Anyways, thanks for your help.
Regards,
Nitin

Is it possible to create a customs declaration for the document which is cleraed from customs

Hi Experts,
I want to generate a custom declaration for the declaration which is cleared from customs.
Is there any function module for this requirement.
Please post your suggestions ASAP.
Thanks
Srinivas

hi Srinivas,
It’s not possible to create a new declaration for a declaration that is
already accepted by customs. There could be below 2 possible options
1. U need inbound cancellation messages in the respective activity sequence,
and then u can request customs by mail or phone to send the cancellation
message. Once the cancellation message is received document gets cancelled and
u can create new declaration
2. U need a new optional activity sequence that will have outbound
cancellation message. once u trigger the cancellation message, customs will
reply back with the cancellation confirmation message and u can create a new
declaration
Hope this helps...
Regards,
Santosh

Is it possible to create a tool tip for an individual cell?

Hi,
Is it possible to create a tool tip for an individual cell?
Sun's JTable tutorial shows how to create a tooltip for an individual column:
TableColumnModel tcm = table.getColumnModel();
TableColumn tc = tcm.getColumn(0);
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("This is a tool tip text");
tc.setCellRenderer(renderer);
Thank you.

See reply #2 below:
http://forum.java.sun.com/thread.jsp?forum=57&thread=424429
;o)
V.V.

How to create a special view for sharepoint list A and deploy this view to specific user personal view?

How to create a public view for sharepoint list A and deploy this view to specific user personal view? Is that possible OOTB?

Views cannot be exported or moved. Can you elaborate your requirement?
--Cheers

Need to create stupid proof templates for non-designers

Ok folks, I'm new to this forum having come across it in search of a solution to my problem.
I need to create illustrator template files (.ai not .ait) that customers can download and use to create their own artwork for print. I have to create them in every printable paper format from business cards to A3 posters, folding, non-folding yada yada.
Now, previously, we used an .ai file with a guide layer we created. This guide layer had all relevant info, was named accordingly. It was set not to print and locked. As I tend to use print to file, distiller and all, this has always been perfectly adequate to create my pdfs. Of course, this doesn't work the same way when saving a pdf, which is what most people do. However, customers who wish to download the templates are having some difficulty with the concept of 'make sure you delete the guide layer before saving your pdf'.
For the most part, the customers using these files are not illustrator literate. Even though there are clear instructions to 'delete' the guide layer when saving the needed pdfs, they are failing to do so. This means when the .ai (with the non printable layer) is saved to pdf, the guide layer as a hidden object is saved within the pdf. Upon printing at our printing facilities, the guide layer has been printed with disasterous results.
A possible solution we came up with was to use the ruler guides to create the guide layer. For this solution to work though, I need to be able to use different colours for different guides within the same document. Which we can't. We can only change all the guide colours and they are all the same colour.
Another idea would be to outline text indicating various printable and non-printable areas and making them into guides via View>guides>make guides, which works to an extent but looks messy, especially when viewing the full page and again, isn't particularly distinctive, leading back to having different guides in different colours.
I've come across another possible solution involving template layers. Viewing the resulting pdf seems fine and in all purposes it does what we need, except for when reopening the saved (not printed) pdf back in illustrator, the template layer is still there and I need it gone. The same way it would be if the .ai were printed to postscript and sent through distiller.
My ideal solution would be to have to ability to have the different coloured ruler guides in place throughout my document, but as I previously stated, all guides have to be the same colour and that's useless in this instance.
So, has anyone got any bright ideas. Coincidentally I need to create the same templates for both psd and indesign but I'll cross that bridge when I've figured this out.

Hey Mike, thanks for the response.
1. Not a chance, if, even when the process is described in great detail in an info pdf, available as info on the website (with screenshot instructions) and mentioned in the .ai file itself, they aren't even deleting the guide layer, then turning off 'Preserve illustrator editing capabilities' is kind of a stretch. Like I said, the folks these templates are to be designed for are not illustrator literate for the most part.
2. Not sure if this would work. I'd have to look into it.
3. Beyond my capabilities. I'll let you know if number 2 works.
One possible solution I've come up with uses the idea of a template layer always on top, with 'DELETE THIS LAYER' and screenshot of layers pallette and clear little red arrows etc. If I can the template layer to always remain on top, with their artwork layer underneath, they would have to toggle hide/unhide to view their artwork, and the reminder to remove the guide layer would be pretty much in their face. That's not a guarantee either though.
Personally, I think what I've been asked to achieve is a pretty hard task and honestly, I'm thinking there are no failsafe options.

Hi all! What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

Buying more hard drive space is a very valid option, here. Editing takes up lots of room, you should never discount the idea of adding more when you need it.
Another possibility is exporting to MXF OP1a using the AVC-I codec. It's not lossless, but it is Master quality. Plus the file size is a LOT smaller, so it may suit your needs.

How to create a daily report for sales order

hi
how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

Hi
You have to use the sales order tables VBAK,VBAP and VBEP
So keep date field on selection screen
and treat this date as Order creation data audat field in VBAK.
based on this fetch the data from VBAK and VBAP with the following fields like
VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS etc and display in the report
<b>Reward points for useful Answers</b>
Regards
Anji

Need document on how to create write back template for 11g

Can anybody provide documentation on how to create write back template for OBIEE 11g?
Thanks

Can anybody provide documentation on how to create write back template for OBIEE 11g?Yes! Oracle does. How about you start by reading it? I will give a hint, it's on the System's Administration guide.

I wish to create a fixture book for a sports team and print it using Duplex. It will consist of 19 pages

I wish to create a fixture book for a sports team and print it using Duplex. It will consist of 19 pages

Can't see what you are looking at.
You will need to describe what exactly you are talking about.
Meanwhile see Imposing Booklets or Duplex printing:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=181&highlight=imposi tion&mforum=iworktipsntrick
Imposed Booklets have pages in multiples of 4, Duplex documents of course in multiples of 2.
Peter

Creating a customized template for Content Presenter

Hi people,
I created a new template for content presenter, I created a jsff file and add a entry in
<jdev_projects>\Application1\mds\oracle\webcenter\content\templates\registry\templates-registry.xml
This is my entry:
<view id="mycorp.content.templates.pressrelease.listitem">
<name>
Marketing Press Releases
</name>
<description>
This is a view of Marketing Department Press Releases
</description>
<template-def>
/oracle/webcenter/content/templates/template1.jsff
</template-def>
</view>
But isn't working, I don't know where I need put my template1.jsff, I've tried in mds folder, in WebContent Folder, at same folder that templates-registry.xml but nothing works,
Someone knows where I need put this file and how can I set <template-def>?
Thks in advance

Hi people,
I have already the answer,
In <template-def> if you use "/"(forward slash) so you're in root context app (http://<host>:<port>//<app>/you're here)
Thks anyway,

Re: is it possible to create informatica visio template for sales force soruce and target objects.

Similar Messages

Maybe you are looking for