Re: iSetup and Oracle GRC. (Branch from thread: Welcome to the Oracle iSetup Forum)

Hi Uma,
Oracle iSetup, was untill last week unknown to me and it looks quit promising. But
Oracle Configuration Controls Governor was mentioned in a sales presentation by Oracle GRC. I guess this is in line with Oracle iSetup, but it seems that Oracle Configuration Controls Governor is a bit more comprehensive. And as we read the 'Data Sheet' it seems to be quit appealing.
We are currently looking at iSetup, which is 'standard' (with a patch) in EBS, but do you know if Oracle Configuration Controls Governor is already available? Or when would you expect it to be available? Because we would like to see how it works (and test it). And is that part of the special GRC suite, which has to be purchased separately?
Hope you could help me with some information.
Thanks in advance.
Martin Blankendaal

Hi Sreedar,
As Anand mentioned in a previous post, we are in the process of finalizing a "Statement of Direction" that will articulate the differences between CCG and iSetup. We apologize for the delay in publishing this information.
In short, iSetup would be the preferred tool for propogating configuration changes among instances, for several reasons: an extensive, supported offering of "solution sets" that span the application pillars, a robust tool and methodology that supports custom API's, solid reporting capabilities, and solid diagnostic capablities, and many more.
CCG's strategic role going forward is to enhance Oracle's "Governance, Risk, and Compliance" offering. CCG's role would address the monitoring of many types of changes, including configuration data.
There are many resouces to learn more about iSetup. You might start with Metalink, including note 395654.1, which links the the R12 iSetup User Guide and Release Content Document.
Hope this helps. Please contact us if you require more information..

Similar Messages

  • My HD has been replaced and when backing up from my time machine the transferred got interrupted

    My HD has been replaced and when backing up from my time machine the transferred got interrupted. When Mac book booted only half the data. So I erased the hard drive to start again although I now can't restore from my time machine  as its saying not enough space on HD to restore. Please help coz I'm freaking out!

    I seriously doubt that you can do that. I've never heard of anyone doing something like this. I also strongly suspect that that windows software didn't preserve all the resource fork, ownership and hard links correctly.
    You are left with manual migration of your data back to your computer. this isn't as hard as you make it sound. You just need to copy you own stuff back. also use the following [post|http://discussions.apple.com/message.jspa?messageID=6185507] to migrate important parts of you user library, Mail, iphoto etc. You will have to reinstall your applications by hand.

  • Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

    Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

    The same cuts that I have in this clip that i performed with the blade tool, I want to duplicate, copye, paste and apply to another clip. I want the cuts to mimic and be an exact same. I wish i could highlight the clip, click copy and then highlight the other clip and then click paste and the cuts apply.

  • Drag and dropping an address from address book to the desktop, the address file does not go where my mouse is positioned.

    If I drag and drop an address from address book to the desktop, the address file does not go where my mouse is positioned. It winds up somewhere in the middle of my screen. Any way to have the address file land and stay where my mouse pointer is?

    You have to assign the favicon yourself to the desktop shortcut (right-click the shortcut: Properties) after you have dragged the link to the desktop.
    You can usually find the favicon in Tools >Page Info > Media and save the icon there.
    Otherwise use the main domain of the website and add favicon.ico (e.g. mozilla.com/favicon.ico ) to display the favicon in a tab and save that image to a folder.

  • I would like to create a pop-up window appear from Labview Interface. In this window, I will have a slide control and an image taken from a camera. The main VI have to run while pop-up window is open. How can I do ?

    When I pushed a button, this pop-up window has to appear. There will be a slide control and a picture from a camera in this window. Is it possible to make appear this windows while main VI Interface continue to run ? How can I do this ? Thank you for your answers.
    Cyril.

    Here you go. This is simple example. Maybe not the best way, I am just
    beginner in LV and still not comfortable with data flow that much. I prefer
    events, so I would change this to use Event Structures.
    When you click on OK button on SliderMain, it opens Slider.vi. Now both
    windows are open and you can interact with both. Now if you click on OK
    again with Slider.vi open, you run into problems. Only thing I did was
    change VI properties of slider.vi, mainly window appearance.
    vishi
    "Cy" wrote in message
    news:[email protected]..
    > I would like to create a pop-up window appear from Labview Interface.
    > In this window, I will have a slide control and an image taken from a
    > camera. The main VI hav
    e to run while pop-up window is open. How can I
    > do ?
    >
    > When I pushed a button, this pop-up window has to appear. There will
    > be a slide control and a picture from a camera in this window. Is it
    > possible to make appear this windows while main VI Interface continue
    > to run ? How can I do this ? Thank you for your answers.
    > Cyril.
    [Attachment SliderMain.vi, see below]
    [Attachment Slider.vi, see below]
    Attachments:
    SliderMain.vi ‏16 KB
    Slider.vi ‏11 KB

  • SIZE OF THE GUST OF GARAGE BAND: The garage window band has remained me too great and I cannot accede from any way to the corner to modify the size. Due to this I cannot accede to the red button to initiate a recording.

    The garage window band has remained me too great and I cannot accede from any way to the corner to modify the size. Due to this I cannot accede to the red button to initiate a recording.

    Two things to try:
    with some Applications it helps to hold down the the "Option Key" while pressing the green "maximize Window" button.
    If that does not help try this Apple Script:
    --Open the AppleScript editor (in Applications -> Utilities), paste the following and run it:
    tell application "Finder"
              set {d1, d2, d3, d4} to (get bounds of window of desktop)
    end tell
    tell application "GarageBand"
              set margins to {d1 + 10, d2 + 54, d3 - 10, d4 - 148}
              set bounds of window 1 to margins
    end tell
    Good Luck
    Léonie

  • HT4059 I bought a book on ibook, read 13 chapters...and then it dissapeared from my phone. The bookshelf is completely empty and won't load. Tried to sync my phone through itunes and it won't sync the book. How do I fix this?

    I bought a book on ibook, read 13 chapters...and then it dissapeared from my phone. The bookshelf is completely empty and won't load. Tried to sync my phone through itunes and it won't sync the book. How do I fix this?

    Sorry, I meant the letters look "faded" not faed.

  • I bought an audiobook doesn't appear in my iTunes library and it's missing from my phone since the last update

    I bought an audiobook doesn't appear in my iTunes library and it's missing from my phone since the last update to iOS 7.4

    Did you already make sure that Apple Mobile Device Service is installed and active on your computer?
    http://support.apple.com/kb/TS1567
    More troubleshooting about your device not recognized in Windows can be found here: http://support.apple.com/kb/TS1495

  • HUGE iTunes AND iPod ERRORS! From "missing files" to the "! Folder"...

    My video iPod (30GB) was bought only about a month ago. It was working fine until a few days ago, when the Music Store wouldn't work. I tried to update it, but it stayed the same. I also saw a message asking to update my iPod software (forgot version #, but it's the newest one), so I opted to update it. I don't know if what happened next is a result of this, or if it just happened, but here's what happened:
    I found my iPod off and when I turned it on, it shows the ! Folder and turns off. If I put it in disk mode, it is black and white and in smaller text (looks similar to the Mini rather than the Video). I couldn't get to anything else after turning it on besides disk mode and the folder. It makes that noise recognizing it, but it's not in My Computer either.
    I tried updating iTunes, but I get a message (this is after trying to restore the system back to before I updated) "iTunes cannot run because some of its required files are missing. Please reinstall iTunes." Of course I do about 5 times, but it does not work and I get the same message. Then I try to back up by using the CD given in the box to install it from there, but it says that there is already another version and I'd have to uninstall by the Control Panel. When I try, I press Change/Remove, but it only loads halfway and closes without doing anything. Therefore I can't get rid of my current iTunes. I see if I can update my iPod, but it says that there is an iPod Service error. It seems like Apple is out to get me or something. Please help, this was a "partial" gift (I paid half) that was pretty pricey for me also, since I am only 14. Any help would definitely be appreciated, and thank you all for your time.
      Windows XP  

    YES it WORKS!!! After almost a whole week!
    The help wasn't really on this site (mainly), but I'll tell how I got the life back in my iPod. Thanks for the reply though Hackstar18.
    I used a DIFFERENT COMPUTER though (we have two) for this since the first one had a corrupt iTunes. I went to My Computer to see if my iPod was listed under there. At first, I didn't see one, so I disconnected it, and noticed that something called "Removable Disk (G:)" (or something along those lines) was removed from the list. Then I reconnected my iPod and it came back, so I knew the (G:) disk was it. I clicked on it, and it said it wasn't formatted correctly, so I decided to format it. It took about an HOUR to do this, but it finally formatted it. I then tried to update/restore it with my 2005 updater (I uninstalled 2006 one). It said "iPod manager internal error" which is different than the "iPod Sevice error" I was getting. I thought I was getting somewhere and that I was onto something, so I went on iTunes (it works on this computer). It showed me the popup where it asks the name and to register, and I was RELIEVED. I installed the 1.1 version and tried it, and after having to close the iTunes window, it recognized it and gave me the option to restore. Of course, while being shocked, I did, and after the short wait, I noticed my screen was back to color, it was responding, and it was back to normal! The update removed some of the things like the backlight option people were talking about and I noticed the options on the main menu were less, but it was back. I'm glad I DIDN'T request to get it serviced/repaired and send it in, because I was so close to doing so. Now, I just gotta transfer my old songs from my defective iTunes on the other computer to this computer.

  • Hi, Plz help me find my stolen black iPhone5, I just bought it unlocked with 1200$ to be worked in Egypt and it was stollen from my luggage at the Airport. It was brand new and the box is sealed. It's serial no

    Hi, Plz help me find my stolen black iPhone5, I just bought it unlocked with 1200$ to be worked in Egypt and it was stollen from my luggage at JFK Airport in NYC. It was brand new and the box is sealed. It's serial no# is 013330002557961. Plz help me for God's sake.

    no way to track phone i the box. I doubt u can track it period.
    Thats some low stuff though. What Airport where u in. I bet NYC or Chicago

  • Automate generation and installation of certs from AD CS over the web?

    We have an environment where there are dozens of separate AD forests, none of which have (or can have) any trust relationships.
    We also have an Active Directory Certificate Server that we use for generating internal certs. This AD CS server is available to all of the servers via the web console (https://some.url/certsrv), but there is no other connectivity to the AD CS other than
    port 443.
    The question is, are there any methods we can use to automate the generation and installation of certs from the AD CS server? Specifically, suppose I am sitting on SERVERX and I am running a script, is it possible to have that script generate and submit
    a cert request to https://some.url/certsrv, then retrieve and install the cert into the machine store?
    The research I have done so far shows that this is typically possible if the CA is part of the same AD forest and is reachable over more ports than just 443.
    Today we do an awkward launch of iexplore and some screen scraping, but it requires manual intervention to get it to work, and we'd like to fully automate the process.

    You should consider to use a certificate enrollment web services (which are intended for such scenarios):
    http://technet.microsoft.com/en-us/library/dd759209.aspx
    My weblog: en-us.sysadmins.lv
    PowerShell PKI Module: pspki.codeplex.com
    PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
    Check out new: SSL Certificate Verifier
    Check out new:
    PowerShell FCIV tool.

  • How do I copy all Email messages to another system and view them seperately from any messages on the new system?

    We're giving my wife's old laptop to our children. We have already set up her E-mail accounts on the new laptop which is now 2-3 months old. While cleaning off the data from the old laptop, I have found hundreds of Emails that I want to save for future use. I just archived the old messages tonight. How do I copy them to an external drive so we can read them later without writing over all the new Emails on the new laptop?

    ImportExporttool:
    * https://freeshell.de//~kaosmos/mboximport-en.html
    how to install addon:
    * https://support.mozilla.org/en-US/kb/add-ons-and-extensions-faq#w_how-do-i-install-an-add-on
    On old laptop:
    Right click on the folder containing the emails > ImportExporttools > choose from options eg: Export folder
    choose where to export.
    You can also choose to export all the messages as eml files.
    Copy file to desktop of new computer
    To Import onto new computer.
    right click on 'Local Folders' > ImportExporttools > Import mbox file
    choose file and click on open
    or if you exported as eml files:
    right click on Local Folder Inbox > ImportExporttools > Import Messages
    See image attached:

  • Unable to open templates from server input form folder and server root folder from some system while the same can be open from others system

    Hi,
    I am unable to open input scheduled from server root folder and also from input form folder on some system while they can be open from others system.
    Please advice.
    Thanks in advance

    Hi Hengye,
    While opening , it dont give any error. When I try to open it , it takes some time to load then nothing happen.However I can open it on other system but not on mine my collegue and user system.
    Please advice.
    Thanks.

  • How to start and stop a progress-bar thread before/after the main thread

    hi. I would appreciate any kind of help on my request.
    I have this as my main() function
         public static void main(String[] args)
              SwingUtilities.invokeLater(new Runnable(){
                   public void run(){                              
                        Options op = new Options();
                        OdessaClient oc = new OdessaClient(op);     
                        oc.setVisible(true);                    
         }Whenever I try to start a simple JFrame with an indeterminate progress bar on it just before the main function and stop it somewhere after I get a StackOverFlow error
    Exception in thread "AWT-EventQueue-0" java.lang.StackOverflowError
         at java.awt.Component.show(Component.java:1302)
         at java.awt.Component.setVisible(Component.java:1253)
         at com.client.CylonBar.hide(CylonBar.java:25)
         at java.awt.Component.show(Component.java:1302)
         at java.awt.Component.setVisible(Component.java:1253)
    ...and so on...How must I implement something like it?

    Not precisely that way, but just off the top of my head, you would have to have a handle to the proccess (server) in the first window, then have a monitor program that allows you take this handle and end it. I would make this monitor program be the gateway to starting and stopping your server. To run a .bat file you can use runtime.exec().

  • Subscribe or RSS Feed From Thread: What's the Differen

    What's the difference between subscribing to a thread and getting an RSS feed on it's?? I'm assuming subscribing to the thread is what happens when one selects "E-mail me if someone replies to this thread."? Is that right?On Internet Explorer v7, when I click?"Favorites" I get a list of RSS feeds but I don't know what they do or what to do with them.

    Subscribing is done on the forum, and you can be notified by e-mail when there is a response to a thread. It will also show you your subscriptions on the front page of the forum, when you're logged in.
    For more information on RSS feeds, check it's Wikipedia article. You'll need a feed reader if you want to use the RSS feeds.
    Cat

Maybe you are looking for