Re: Issues/Questions with BAPI_COPAACTUALS_POSTCOSTDATA

I cannot get vendor from sourcelist to appear in my COPA document (ke23n). I'm using WWVND. Any thoughts?

I got the profit center to work. And it is possible to load w/o customer number KNDNR.
My issue is when there IS a valid customer number. I get an error, if I change just the KNDNR to a non-existent customer, it works. Here is my table entry:
60 000003 KNDNR 0000021014
By the way, when I use BAPI_COPAACTUALS_POSTCOSTDATA in se37 single test, I don't get an error.

Similar Messages

Several issues questions with 865PE neo2 FIS2R

ok first off thanks to the people here, the sticky's are great and very informative.
although i do find the info outdated in that they all refer to old bios's. other than that this is a fantastic forum
ok so on with the questions.
im using a Silicon Image IDE U133 RAID controller (PCI CARD), , the ide hard drive(s) do NOT have to be in raid its just like a Promise card but its made by someone else.
ANYTIME i have ANY type of hard drive hooked up to that, the motherboard takes nearly 5 minutes to boot to the active hard drive. even if i select boot menu and then the RAID hard drives the SATA drives i mean.
my active hard drives are 2 Maxtor 160gig SATA drives in RAID0 mode.
if i have NO hard drives hooked to the controller card the system boots directly to the active boot hard drive. without dealy.
IF i have an ide hard drive set to boot off the SIL card, it takes just as long. which seems like ages.
anyone know of issues with this mobo and certain IDE hard drive controllers. (PCI)
i too am having blank sreen issues with my 9700 pro video card. but mine is nearly 2 out of 5 times i boot i have no video, and many times i am forced to reach around the pc case and unplug the power cord for a few minutes, in order to get the system to boot WITH video.
another issue that i have and this is the WORST.
nearly 90% of the time, the motherboard will NOT i repeat will NOT boot from a floppy or cdrom, all i get is the message on screen, if i am using a bootable floppy, like "Starting windows 98" or "Starting Windows ME" these are DOS boot disks made with windows XP.
i then get only a blinking curser. and nothing else.
OR
i get a blinking cursor and then i must wait 5-10 minutes before anything else happens. and even then usually the cdrom or floppy wont complete the booting process.
this happens regardless of if i have anything hooked to that IDE controller card.
i am now using the LATEST bios offered for this mobo and nothing has changed in fact ,,well according to the readme i was expecting to see some changes within the bios but i seee none. maybe i read the read me wrong. (say that 5 times fast)
i can NOT run the ram performance mode in anything other than slow. which is making me very angry.
i have infineon ram not sure what model but i will report back when i find out.
but i do recall sandra reporting it as supporting 2.5cas and other setting that appear to be FAST or TURBO and yet i cant use those in the bios otherwise my system reboots in windows or i get memory speed errors during post.
overall im VERY pleased with this mobo but am discouraged at the way its treating me.
i have a PentIV 3.0ghz HT which is a NON production model, it is a sample model with the multiplyer unlocked. i can go with a lower multiplyer but NOT a higher one, so i assume its unlocked but the CPU itself is limited to 15x multiplyer.
i have tried tons of configurations and can run very stable at 3.45ghz but i MUST make the dram 333 mhz not 400. then raise the FSB to around 225 or 230. but i still get serious power offs when doing any heavy work on the pc.
i have CPU voltages at 1.575 yet sandra reports it as 1.55
DRAM voltage at 2.7 ( i am using DDR400)
and AGP at 1.7
with this CPU what is a GOOD voltage to use.
is it ok to go higher than 2.7 with DDR400 ?
and AGP everything i have read said that 1.8v will fry the 9700 pro. is this true ?
sorry im asking alot of questions but if you can help me with any of them i would REALLY appreciate it, and i would pass along any info i learn.!

Well as Far as your PCI IDE Controller Questions are concerned, I would not know as I have never Used one , And with the Available Promise controller, you should Try using this instead......As Far as your Memory Voltage, You can Raise the Voltage above 2.7 Volts, But unless you are Really Overclocking the PBS or FSB as some call it, then 2.7 Volts is the "Norm" For this Board, But if you do NOT have High Performance RAM you should check with the Manufacturer, before you Go any Higher than 2.7 V, as far as the AGP Voltage is concerned, 1.6 Volts is the MAX that you should Have it set to with any of the new NVIDIA-FX or ATI-PRO, or XT Series Cards, Because as you know, the Cards that are 8X AGP Speed only Require .8Volts to begin with, and the ABP Voltage is Further Reduced by the Cards onboard Electronics, And if you have one of the High Performance Cards, well as you know, these get 90% of their Operating Power from the 4 Pin Molex PSU Connector. Any higher AGP Voltage then 1.6 Volts will only increase the Temps. of Both the Motherboards Chipset, and the VPU itself.................Sean REILLY875

RAM issues/questions with Bridge CS4

Hi,
I've become a little perplexed with Bridge CS4. I constantly get an "out of memory" error with bridge when working with many large files (21 megapixels) through adobe camera raw, despite having a bullet proof system. First, some system specs:
Vista 64-bit
Intel i7 3.2GHz processor
12 Gb of 1600Mhz RAM
Dedicated separate scratch disc
This computer just freakin rips!
So photoshop (the 64 bit version) just runs like a breeze, despite vista being its stupid self and taking up about 1.6 gigs of ram just for the OS. However, I am mainly wondering that if Bridge isn't a 64 bit program (it is installed in the x86 program files. Only photoshop is installed in the 64-bit program files) then maybe it can't utilize the extra ram over 4 gigs? If so, then it is severely crippled and limited to the 4 gig ceiling shared with the RAM thirsty OS.
Does anyone actually know and have any answers? I know the "out of memory" error has long been discussed but never seems to come to some solid conclusions. And really, there is no reason why bridge should be out of memory on a 12 gig system with 9 of those just sitting free when it say its supposedly "out of memory".
Any ideas?
Thanks

If I remember correctly the window's paging file is set to a discrete size, believe recomended 1.5 x ram size. If Bridge is running in 32 bit mode guess you only need 6 gig paging file, but would more do anything? How large is it, is it on a seperate partition? Also consider this:
If a paging file resides on a partition that contains other data, it may experience fragmentation as it expands to satisfy the extra virtual memory that is required. An unfragmented paging file leads to faster virtual memory access and to a greater chance of a dump-file capture that is free of significant errors.
Is fragmentation a consideration?

Recording issues/questions with GB 8 and M-Audio Fast Track Pro

Hello. I'm sure this topic has been covered and I think I must be missing something painfully obvious here. Okay. I want to record vocals onto a GB track using M-Audio's Fast Track Pro. I want to be able to hear myself through headphones while I'm recording vocals.
1. I've installed the drivers.
2. The M-Audio Icon appears in the System Preferences folder (other).
3. When I go to GB, I go the GB Preferences and select Fast Track Pro as the Input.
<here's where I'm lost>
4. I plug an XLR microphone into the front XLR connection and I have to turn gain all the way up on the Fast Track Pro to even get a signal. When I do get a signal, it only registers on one channel.
*I do understand that a microphone is a mono instrument, does GB automatically create stereo channels on a new track? If so, do I need to make it mono? and how do I do that?
5. How do I route the audio to my headphones (plugged into the MAC) to monitor my recordings?
I guess I'm confused with the system preferences vs. the preferences found in GB.
Thank you for any assistance with this!

When I do get a signal, it only registers on one channel.
http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
How do I route the audio to my headphones (plugged into the MAC) to monitor my recordings?
Choose Built In for output in GB's prefs.
I guess I'm confused with the system preferences vs. the preferences found in GB.
leave the system prefs alone, just change GB's.

SMP 1.0 issue/question with SMIL, XML, M3U

Tryng to dynamically create a SMIL, XML, or M3U file to be played in SMP 1.0. The page is generated from PHP script and appears to be properly formatted. The .src parameter is properly set when the file is a static SMIL or M3U file, but as soon as we point the .src parameter to the dynamically generated PHP code, the SMP gives me the "we are unable to connect to the content you requested error".
Please note: The HTTP content types are identical between the static file and the dynamically generated file.
Any help you can offer would be appreciated.

hi jurkiri,
My buttons does not have the immediate attribute set to true.
my button is just like that :
<af:commandButton text="Visualiser le rapport"
                              id="commandButton3">
           <af:fileDownloadActionListener method="#{backing_statistiques.rapportChangementPlafond}"
                                                       filename="rapport.pdf"
                                                       contentType="application/pdf"/>
           </af:commandButton>
If I do not use the filedownloadActionListener and use the similar method directly as a button action, the parameters work but the button remains down.

I have a question about using multiple ipads in our school. Each of our teachers have a iPad and AppleTV in their classroom. The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher

I have a question about using multiple ipads in our school. Each of our teachers have a iPad and AppleTV in their classroom. The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher #1 iPad to its AppleTV without effecting/projecting onto the adjacent teachers #2 classroom AppleTV?

Not as such.
Give the AppleTV units unique names and also enable Airplay password in settings with unique passwords for each teacher.
AC

Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

It is against TOU to speculate on these message board. Suggest you post your question on the Mac Rumors site.
As I already stated, there is no 10.6.8 update. If there was, it would be listed in Software Update.

HT201303 Have forgotten my apple I'd security questions with respective answers

Have forgotten my apple I'd security questions with respective answers

Forgotten security questions - https://discussions.apple.com/message/18402551
More involved forgotten question issues - https://discussions.apple.com/thread/3961813
Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37

S4LEAGUE AND OTHER GAMES ISSUE - INTERFERENCE WITH...

Infinity is fine for other stuff except certain web games e.g.
S4LEAGUE AND OTHER GAMES ISSUE - INTERFERENCE WITH SERVERS
Issues
Random disconnects
slow connection
slow client server
Google searches suggest it might be a BT issue.
Can you help, thanks

using wired or wireless connection?
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

WiSM Design and Testing Issues / Questions / Queries etc......

Hi all. Heres hoping you can help........
I hope you can grasp the following description of the test network I have. I admit a diagram would have been better but it's hard to send a whiteboard over the web : )
I am currently in the process of designing and testing out a wireless solution and am having a few issues / queries. I have a 6509 with a Wireless Services Module (WiSM) installed in slot 3, one Cisco 1240 AP on a remote LAN and a DHCP server on a remote LAN (not the same as the AP)
I am using LAG on controller 1 with port channel 1 and native VLAN 20.
VLAN 20 is 10.1.1.0 / 24
The management interface has IP address of 10.1.1.10
The AP-manager interface has IP address of 10.1.1.11
VLAN 11 is 128.88.1.0 / 24
The service port has IP address of 128.88.1.10
The Cisco 1240 AP on the remote LAN is picking up a IP address via DHCP (from a remote DHCP server) OK and can route to both the aforementioned VLANs 20 and 11.
Issue/Question 1
I can ping the management interface locally on the 6509 and also remotely from the AP so all looks OK there however I cannot ping the AP-manager locally or remotely.
Is this expected behaviour? I would expect that if I can ping one I should be able to ping the other or is the AP-manager interface not routed and only used in some way to create the LWAPP tunnel>
Issue/Question 2
As previously stated the AP is picking up and IP address but it is not being passed the Option 43 parameter from the DHCP server (not yet ruled out the DHCP server as the cause of this). Due to this I have amended the DNS entry of the management interface (10.1.1.10) to CISCO-LWAPP-CONTROLLER as a last resort. With a console on the AP I can see that the AP tries to join by the "%LWAPP-5-CHANGED: LWAPP changed state to JOIN" output but then get;
LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not recieve the Join response
LWAPP_CLIENT_ERROR_DEBUG: No more AP manager IP addresses remain.
Is this related to the fact that I cannot see the AP-Manager interface on the network?
Issue/Question 3
I have chosen to hard code the IP address of the Service port rather than leave it to DHCP. I am more comfortable having static addresses for management. However, there is no option for a default gateway for the service port.... If I try to get round this by applying a static route via the CLI on the WiSM controller to point traffic out via 128.88.1.1 on VLAN 11 this seemingly overrides all routing on the controller and causes my management interface (10.1.1.10) to fall off the network. Is the routing table applied "en masse" to the Controller? If so this surely means that to use the Service Port you have to be on the local LAN segement?!?!
Thanks for reading my ramble and heres hoping you can shed some light on my "niggles" !

Hi
I am having exactly the same problem.
Getting the same error message "No more AP manager IP addresses remain."
I'm deploying 200 AP's that will connect to 2x WiSM (4 controllers) in 2 seperate C6k Chassis
(Controller 1a & 1b = wism 1, 2a & 2b = wism 2)
I have had 1 out of the first 5 AP's physically connected, come online and register with Controller 2b (btw: this was not the master controller, it should not have registed with 2b). All others fail with the same error message as above.
I have all Management and AP-Manager interfaces in the same vlan/subnet as my AP's.
I place a console cable onto the failed APs and see the AP cycle though the motions of trying to find the controllers, download new software code from a random controller, then it reboots, gets DHCP assigned, then get the "No more AP manager ip addresses remain" and then issues a "Reload requested by LWAPP CLIENT.
Then the AP does the whole cycle all over again.
Not sure why the AP's don't register with the controllers when they are all in the same vlan.
I have a couple of extra questions.
1. what address do you bind to the dns entry cisco-lwapp-controller.localdomain, is it the management address or AP-Manager address ?
I have bound it to the Management address for WiSM 1a.
Also I have 4x controllers (2x WiSMs, 2 controllers per WiSM). Do I just bind controller 1a's address or do I have to put 4x DNS entries into my DNS server for all my controllers?
2. DHCP option 43, Do I place all 4x management ip addresses in the option or do I put in the AP-Manager Ip address?
I followed this guide but was still a little unsure http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp125304
2. This final question is more around Dynamic Interfaces for my 4 controllers once I get the AP's resisted,
Do I have to set up a dynamic interface ip address on every controller?
e.g.
Ssid = data, VLAN=10, VLAN10=10.0.0.0/24, I will bind AP's 1-8 to VLan group 10.
Do I have to setup 1 dynamic interfaces per controller in the 10.0.0.0 subnet, taking up 4 addresses ?
And if I only have to set up 1 or 2 dynamic interface, how does this work if the controller fails?
Cheers

Verizon 4G LTE Broadband Router - Does Verizon Issue You With A Public IP Address?

Hi,
http://www.verizonwireless.com/home-office-solutions/4g-lte-broadband-router-with-voice/
Regarding the above Verizon 4G LTE Broadband Router, does Verizon issue you with a public IP address that can be accessed from outside of their network or do they issue you with a private IP addresss just like they do with their JetPacks?
Thank you!

That's an excellent question olimits7! It will be my pleasure to assist with your inquiry. Our voice and data services are transmitted using a 10-digit mobile number on our network. May I ask do you have the mobile number on your account? If you are interested in a private IP address then we can discuss options. Please advise so we can begin.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

How do I reset my apple id security question with out a rescue email

How do I reset my apple id security question with out a rescue email?

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(101013)

MB26 ,CO27 - goods issue components with serial number?

Hi ,everyone!
I know CO27 and MB26 can do goods issue to production order very easily and quickly!
But It seems CO27 and MB26 can not work well with the component with serial number.
I aslo know MB1A and MB1B can post goods issue for component with serial number.But in MB1A and MB11 , it is very difficult to can material by material number quickly while doing more then 100 components issue to one production order.
And for authorization purpose we restrict MIGO not to use goods issue for production order.
So I want to ask how CO27 and MB26 do goods issue for the component with serial number?
Or there is another ways to goods issue component with serial number to production order easily,exclude MB1A,MB11 and MIGO?
Thanks for any reply!

Hi Vivek
We use CO27 for goods issue to production order ,just like MB1A goods issue to production order.
But in the BOM components of the production orders ,some semi finished products are with with serial numbers ,so we can not use CO27 or MB26 to issue these components with serial numbers to production orders!

Basic questions with respect to ABAP WebDynpro Application

Hi All,
I have two basic questions with respect to an ABAP WebDynpro application :
a) If an ABAP WebDynpro application has been developed, how could it be made available to the end user?
b) Can an ABAP WebDynpro application be developed in ECC or is it only applicable for version 4.6c?
Thanks & Regards,
Sushanth Hulkod

Sushanth Hulkod wrote:
> a) If an ABAP WebDynpro application has been developed, how could it be made available to the end user?
>
> b) Can an ABAP WebDynpro application be developed in ECC or is it only applicable for version 4.6c?
a) If an ABAP WebDynpro application has been developed, how could it be made available to the end user?
Answer - By providing direct link of the WD application created in SE80, creating iView for webdynpro abap application in the portal environment and NWBC environment
b) Can an ABAP WebDynpro application be developed in ECC or is it only applicable for version 4.6c?
Answer - Yes it can be developed in ECC. Webdynpro ABAP is introduced in NW 2004s (SAP NetWeaver 7.0 or ECC 6.0)
Thanks,
Chandra

Issues Capturing with Final Cut Express

Hi
I am currently having issues capturing with Final Cut Express. I am using a Firewire 800 gold speed cable 9pin/4pin with my Sony LSF-S58 camera. I use mini DV tapes and usually capture on other computers with no problems. However this time I am using Final Cut Express version 4.0.1 along with a Thunderbolt to Firewire adapter so it'll connect with my MAC Book Pro (Operating system OS X 10.6.8). The issue is when I open Final Cut's capture option there is a message at the bottom that says "No Communicatin" I have tried various settings within easy set-up and nothing seems to work as well as browsing this help board along with others looking for the answer. Any help anyone can provide would be great. Thanks.

When I Google LSF-S58, I get a Sony Lens Hood, not a camera. Are you recording in HD or SD?
Have you used the Thunderbolt to Firewire convertor successfully on your computer with other devices?
Have you used the Thunderbolt port successfully with other Thunderbolt devices?
I don't know if this is applicable to your computer, but there is a Thunderbolt software update for 10.6.8 here:
http://support.apple.com/kb/DL1452?viewlocale=en_US&locale=en_US
MtD

Re: Issues/Questions with BAPI_COPAACTUALS_POSTCOSTDATA

Similar Messages

Maybe you are looking for