Re: JB3- Editing with Cool Edit

Okay,
This is for people with a JB3. I am using the editing software Cool Edit '96. I am wondering if any of you use this software for editing purposes? I use it when I dump my 'line recording' from a concert that allows taping to edit it so I can burn it on a CD without long pauses etc... I am wondering if anyone who uses this or a like editing software how can I assign a track number to a song track? Basically the 'line recording' is one continuous recording so with editing I splice up that recording into individual tracks but don't know how you can assign a track number?
Thanks whoever has done this!
TMO

Hello
I am about to start my third 3D animation edit.
I am currently rendering an animation using Maya that will be rendered to image sequences. Each shot will contain up to 100s of images that will be strung together to make "reference movies". Each shot will have one reference movie. We use reference movies in order to preserve the original frames.
I need to edit these 1280x720 movies in Final Cut. We've done this before by directly editing with the reference movies, but it was sloooooow. We were just pushing too much data through our RAID, and the renders were excruciating.
This time, I'd like to render each reference movie to an HDV file that I can edit easily with. Then, I can edit the video, add sound, transitions/effects, and have a clean finished product for client review.
But then I need to export an uncompressed version using the source frames.
Here's the question:
Is there a good way to plan my project so that I can easily replace my HDV clips with the reference movie clips all at once (without re-linking them one at a time)? If that's possible, then I could edit quickly, and then replace footage and go through just one FCP render in order to get a clean, uncompressed version.
Sorry for the convoluted question. I appreciate all responses.
-------------S

Similar Messages

I need help with Cool Edit 2000

I need help with Cool Edit 2000. Can someone help me?

Message edited by moderator: maybe don't publicly post your serial?
Quite! Never a good idea, even with really old software...
jackm36094786 wrote:
Steve: What I have is a Serial # (?) xxx ID # 105368761 and a case # 3009176.I also have the program on my Gateway computer but I don't know how to use it. Is this of any assistance?
The program software should install fine (others report using it successfully) but the difficulty has always been registering it. To do this you need to find a program (that often people discard, unfortunately) called ce2kreg.exe and run that. That's where you enter your registration details, and how you get rid of all the noises that CE2000 will put all over your audio otherwise (unless you severely restrict the facilities you can use).
It used to be the case that if you'd lost the registration program but had the serial numbers, that Adobe would send you a copy of ce2kreg.exe, but somehow I doubt that they'd be willing to do this any more - it was a long time ago now, after all.

A55M-P33, CPU fan not slowing down with Cool&Quiet

Hi,
I recently build a computer with an A55M-P33 motherboard and A4-3400 CPU with stock fan. That CPU came from my computer and was working fine, the fan too and both throttled down with Cool&Quiet enabled.
On the A55M-P33, the CPU does throttle down (checked with CPU-Z), but the CPU-fan does not. It keeps spinning at full speed.
Did I miss a setting in the BIOS, besides the setting to enable Cool&Quiet, or is there something else going on? It's not a big issue though, just a little bit of extra noise, but I hate it when something does not work as it should.

Only solution to that is to determine if you even need the case fan. If you do, then perhaps you can parallel the case fan with the CPU fan if its PWM, else, look at an aftermarket fan controller.
Example http://www.sunbeamtech.com/PRODUCTS/Rheosmart/3.html
and http://www.amazon.com/Sunbeamtech-PL-RS-PCI-Rheosmart-PCI-Controller/dp/B004LL8KF6/ref=sr_1_1?ie=UTF8&qid=1380284728&sr=8-1&keywords=rheosmart
and http://www.deepcool-us.com/Product/ROCKMAN_PWM/

K8N Neo FSR, possible BIOS bug: setting Vcore with Cool'n Quiet enabled broken?

Athlon 64 3400+, socket 754
K8N Neo FSR, Pheonix-Award BIOS V1,5
WinXP SP2
Having Cool'n Quiet disabled in BIOS setup, CPU core voltage adjustment
using 'Adjust CPU VID' below the Athlon 64 default 1,5V core voltage
works like a charm. Fine!
But with Cool'n Quiet enabled in BIOS setup (and WinXP), under load the
CPU core voltage raises to 1,5V in any case, independently of what I did
define in BIOS setup with 'Adjust CPU VID' (e.g. 1,4V). Software tools setting
Vcore like Core Center are not running.
So I can choose to either run a silent system in idle mode with Cool'n Quiet
enabled or under heavy CPU load with Cool'n Quiet disabled but Vcore
reduced :-( Am I missing something or does it rather look like a BIOS
bug?
Greetings, Falo

Quote from: Tiresmoke on 21-March-05, 00:19:19
As undervolting is not considured standard operating proceedures then how can it be considured a bug.
nor is overclocking but MSI mobo manual reads 'This motherboard is designed to support overclocking.'
So this mobo is designed for supporting at least one non standard operating procedure
Seriously, if BIOS offers a feature I suppose it to work as expected.
regards, Falo

Sblive not working with Cool n'Quiet, how about Audigy

My SBli've will not work with Cool n'Quiet enabled. I tried moving it from slot to slot, I fumbled with the Bios (and every change made matters worse), memory is ok (at least according to memtest and prime95), kx drivers won't help either (but sound a lot nicer).
Well, what gives, the card is a little over seven years old and has earned a retirement.
I'm thinking about replacing it with an Audigy 4 (not pro) und would be very happy if someone could write about her or his experience with the card, esp. with Cool n'Quiet enabled.
Btw. what kind of card is it anyway? Does it use a 0k2-Chip?
thanks
My System:
AMD X2 3800
Asus A8V (Via KT800pro, AGP)
Nvidia 6600GT (AGP)
024 Mbyte RAM (conservati've timing)

I cant promize anything, but it should work. X-FI and Audigy 2 work just fine with C&Q enabled. So Audigy 4 should work fine too.

Play audio files with cool buttons

I want to create an embedded audio file as a swf file. On the
page, you would see a series of stop, start, and volume buttons. I
want to be able to add my own buttons that I create in Photoshop as
the player buttons. I have the buttons, I have the mp3 file as well
as the swf file. How do I create one of those cool players that you
see on websites with audio?

Lloyd already mentioned mediaelement.
There's also soundplayer which is wav only
https://msdn.microsoft.com/en-us/library/system.media.soundplayer%28v=vs.110%29.aspx?f=255&MSPPError=-2147217396
You don't need storyboards at all.
You could play sounds using triggers or code.
http://www.wpf-tutorial.com/audio-video/playing-audio/
https://msdn.microsoft.com/en-us/library/ms752338(v=vs.110).aspx
I think I mentioned this previously.
I recommend you use visual studio to develop routinely and blend only rarely.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

How do I open QUB? I want to start making databases visually with cool schema but can't open qub?

Hi there everyone
yet another post
I have previously asked how to open qub and received the following answer....
charis,
"Open the Recordset Wizard in Dreamweaver. Look at the options on the right. One is QuB and that is the Query Builder. After you click on that, you have to click on New Query to open the full Query Builder.
The Query Builder will open and run in a separate browser window."
Ok so I have tried this........ and all I get is
'Query Builder files were not found on the remote server. Please upload all files and return to this page.'
So before that I did go to create a new recordset .... I establish a conection to my database and click "new" and then enter "Test" as a name then my browser window opens up and I get this message....
So..... any Idea what I am doing wrong?
I have all my tables set up and I want to connect them together "join" them
I did think that I could do it all with my local host "wamp" server but I only just figured out that it does not support forein keys.....visually.. so I am going to try advanced quuery builder but then I thought that I should be able to di this with ADDT's QUB........
All I really want to do is connect the tables in my database...... preferably using a visual interface..... I am hopeless at code....
I have looked at some adobe tutorials building a contact management system..... http://www.adobe.com/devnet/dreamweaver/articles/addt_contact_management_pt3_05.html
and the QUB interface looks great easy to join tables and all visually just what I need!! but I cannot get to work.....
So..... I know it sounds tooo easy and I should be able to do it but I really cant get it to work.... there is a great tutorial at http://www.interaktonline.com/Products/Bundles/MXKollection/Documentation/
under the "SQL Generation" part but I cannot get the same QUB interface to open in my dreamweaver ..... so I cannot do anything......
can someone please explain how this all works......
any help or suggestions would be great......
have a nice day.......

Hi Thanks for the reply
WOW cool as..... worked like a charm.
I was able to upload the QUB file from inside the includes folder and then open up QUB
Thanks a lot
I joined my first two tables easy as..... cool as
and the help button takes me to the right place in the adobe site.... something I could never find.
So thanks a lot......
but..... opened a can of worms...haha... one step forward ten steps back.......
Yet another steep learning curve
one quick question, if anyones game,
Do I have to make make to tables in my database all 'InnoDB' not my 'myisam'...... I read up on joining tables witih my phpmyadmin and it said that I could only use innoDb not myisam.... Is that correct?
Thanks again have a great day

Ticking sound in sync with cooling fan

I just started hearing a ticking sound in sync with the frequency of the cooling fan speed. I'm guessing it's a bearing going bad in the cooling fan but that sounds like the diagnosis on a car engine. Anybody have any experience with this?

You could, but it would probibly get better results if you measured the output of an audio amplifer that is being driven by the microhone. The problem is that microphones tend to be pretty low-level devices so reading them directly could cause noise problems.
In terms of an amp, unless you are particularly concerned about amplitudes, any cheap thing you could pick up at radio shack would work.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Problems with Cool N Quiet and MSI Live Update

Hi
I have had my K8T NEO FISR2 motherboard for a year and generally I have been very happy with it. However, I have just installed Full Spectrum Warrior (about 3 weeks ago ) and Nortons Internet Suite 2005 and both installations resulted in the same error message when I boot up.
The error message is that MSI Live Update isn't started up, and also that Cool N quite is not supported on my motherboard which is obviously rubbish.
I have done a complete re-install of the Live Update and Cool N quite and that fixes it, and then it seems to come back a day later.
Has anyone else experienced this problem?
Thankyou for your help

I stopped using the MSI software completely. Also got lots of troubles with it. MSi Live Update for example stops the audio drivers working while checking their revision and so on, so my advice is to use it only if needed once in a while and not loading it together with Windows.

Oddity with Cooler Master Hyper 212 Evo CPU cooler

Bought COOLER MASTER Hyper 212 EVO RR-212E-20PK-R2 Continuous Direct Contact 120mm Sleeve CPU Cooler Compatible with latest Int… Aug 2014 and no previous problems that I know of...
UNTIL... computer was off this morning... when I pushed power on, stopped at a CPU fan warning screen and command to press F1 for setup
Did so, and screen said fan was at less than the require 600 RPM (something like 592) until after a few seconds, fan went above 600 rpm and boot up proceeded
Have had CPUID HWMonitor running in the background all day, and fan is running at 612-655 rpm, currently 625
No odd noises to indicate a fan problem with this 4 month old unit
Anyone else ever had this happen with this brand/model cooler?

cc_merchant wrote:
Since fans either run or not at all
I've seen fans, either due to bad bearings or being gummed up, run at slower speeds than they were supposed to run.

MSI P45 PLATINUM with Cooler Master V8

Hi i was wondering if the Cooler Master V8 would fit well with an msi p45 platinum board (mid size tower with q9550 cpu) without hitting the pipes. cus i havt been able to google any images with these two together
any suggestions?!
cheers!

The Zalman 9900 would be another good choice to consider. http://s326.photobucket.com/albums/k432/HU16E/P45/

Qosmio G20 error message: problem with cooling system has been detected

I am attempting to fix a Qosmio G20 (which is about 3 years old, so no longer in warranty).
The error message is: Warning: A problem with the cooling system has been detected.
I have managed to remove the outer case and observe the machine working, and basically one of the fans is not operating at all. The fan which is nearest to the power connector seems to be working fine (it seems to spin quite a lot, dont know if this is normal), it is the other fan which does not seem to move at all.
When I reattached the case and switched the machine on I noticed after a few minutes that the heatsink vent of the working fan got quite warm, whereas the vent of the non-working fan stayed cool.
I have cleaned the fan of dust and have also altered the BIOS to battery mode from high performance mode, but still the problem exists.
I would be grateful if someone could advise whether the problem is the fan or something else.
If the fan is the problem, where can I buy one from (I live in the UK)?

Hi
In my opinion there could be something wrong with the cooling module and the replacement would be necessary.
Usually this should be done by an authorized service provider (ASP) in your country.
The technicians could replace it with a new part and also could renew the thermal grease which is placed between the cooling module and CPU.
Therefore contact the ASP in your country and ask for the further handling!!!
By the way; you can purchase the cooling module also from the ASP!!!
Good luck

Can't restart with Cool n Quiet (FIXED!!!!!!)

Anyone else having problems restarting PC from within XP sp2 with CnQ enabled? My PC shuts down but will not POST again unless I reset or powercycle my PC. I read another posting that said to increase your vcore to 1.55. Tried that but didn't work for me.

Quote
Originally posted by tritium4ever
Cool, glad you figured it out. As soon as I replicate the problem and your suggested fix, I'll add it to my CnQ FAQ.
Could be an isolated problem. As archermoo stated, he doesn't have any problems setting his multi to "startup". But it definately solved my problem.

G505 Still overheating non-stop....96 degrees idle WITH cooling pad. Gets worse!!

Since the day I opened the package and plugged it up, it's been over heating. Now it shutsdown quite frequently and over the past year I've seen a MAJOR decline in performance. Is there anything I can do about this? I have 24 days left in my warentee.

Hi Noobtuber,
Thank you for replying, I apologize for the delay in reply.
As per the query we understood that you are facing an issue with system which is overheating
As you have mentioned even after the energy management is set to balanced and also you have mentioned the fan spins, as after all the trouble shooting the issue still persist as this might be the hardware issue as this issue might be with heat sink or the hard drive hence , please carry the laptop to the nearest service centre to the complete check-up.
Please click here to visit the Lenovo support link and select your region to get the contact number.
Hope this helps! Do post us back for further queries.
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Help with Cool Gray printing in CMYK

Setting up a corporate guideline book and not sure how to specify the two Cool Grays they use when used as CMYK.
Cool Gray 8 (0, 1, 0, 43)
Cool Gray 10 (0, 2, 0, 60).
When using the Cool Gray 10 as bodycopy, wouln't it be better to just use a screen of black? I don't think the 2% magenta would even print, but if it would, there would be the chance for ghosting is slightly out of registration.
I can see using these builds above for larger areas of color, but not for copy. Or are the 1% and 2% not even worth worring about becuase they wouldn't even show up?
Thanks

I took a look at those 2 Spot colors in one of Pantone's printed reference guides. Those guides are printed using industry standard printing processes, including Heidelberg printing presses. Small percentages like 1-2% does not mean they will not print. But, for argument's sake, if they did land outside the Black in an out-of-register scenario like you've outlined, the 1-2% Magenta even off kilter by 1/32" would be hard to detect without a loupe. But, by looking at the printed reference guide, you can clearly see the subtle difference the Magenta plays on the color. That said, I would retain the industry standard of the full CMYK equivalents rather than a stand alone screen tint of the Black.
One more thing. Pantone and the entire print industry use those CMYK numbers to match as closely as possible on-press to the Spot color. If you are building a standards guide for your company, stick to the industry standards rather than deviate into your own subjective opnion about what or if a color will print. It's already been determined to print. If your company wanted a Spot Gray that, when converted to CMYK would equal 60% Black, then they'd be using that instead.

Re: JB3- Editing with Cool Edit

Similar Messages

Maybe you are looking for