RE: Language and Code-Sets

Thanks Billy,
i have allready AMBASSADOR-Demo. But the problem is, it is not the solution
for
making own Code-Sets. With AMBASSADOR you maintain your applications-text
contents in a much better way than extmsg-Utility does.
Joseph Mirwald
GERMANY
EMAIL: [email protected]
Billy Cole wrote:
I had kind of the same question a bit ago and someone sent me
this.....you may want to check to see if this is a solution to your
problem
Billy Cole

RE:Language and Codeset
During Development (Running man) the workmsg is used
to find the catalog. In Partition Workshop using
Running man, the catalog is copied into the tmp
directory and is accessible like it is distributed.
The distributed Application use:
%FORTE_ROOT%/userapp/{applicat}/msg/de_de/{applicat.cat}
When you make a distribution the catalog(s) are copied
into the appdist-Directory.
Hope this helps
Joseph Mirwald
GERMANY

Similar Messages

  • Additional language and character sets in R/3

    Our SAP for Retail R/3 system (GUI 470 Basis 620) is about to incorporate some new stores we are opening in the Czech Republic. With English (EN) and German (DE) languages installed, we are able to type, display and save to the database all of the Czech characters apart from two of them. It seems a bit silly to install a whole new language (CZ) for these two characters alone. Is it possible to somehow add an additional character set to SAP that would contain the Czech character set? We are happy for Czech users to log on in English so we don't need to see Czech characters in standard field descriptions in the GUI, but users will want to type these characters into items such as material/article description fields.
    Any advice as to the best way to go with this would be greatly appreciated.
    Kind regards,
    Stuart Richards

    Hi Stuart
    CS belong to 1401 code and EN/DE belongs to 1100.. few char-sets might match others might not..
    Best practice is to install the language..
    You are not know about the future whih CS words that the users might type in.
    Regards
    Madhu

  • Portal language and Browser setting

    hi,
    The language of the portal objects change once i change the language settings in Browser. I want some portal objects to remain in English unchanged and the others  to change according to the language selected. What should i do? Where should i change to achieve this? Please help...
    Regards,
    Vijay K

    A litle late... anyway: You can set something like "forced display language" in any iView's properties.

  • New Language and Font Set

    Greetings,
    Using RoboHelp 7, I need to create a Webhelp file in
    "Inuktitut" (a langauge used in parts of Northern Canada). This
    language is based on symbols. I downloaded the required font set
    which has been installed in the Windows Font Folder.
    Will the new font set automatically appear in the font
    drop-down list, or do I have to navigate to the new set?
    Thanks,

    Hi all
    Another possibility is to ask if RoboHelp has been restarted.
    Sometimes applications will read in the list of fonts or
    whatever upon startup. So maybe RoboHelp works like this too. So
    before conceding defeat, you may wish to ensure you have restarted
    RoboHelp.
    Cheers... Rick

  • Hi, can someone please tell me why the spell check in pages doesn't work. I went to preferences and enabled this auto spell checker and have set the language to british english. But still it doesn't work while it works perfectly in TextEdit.

    Hi, can someone please tell me why the spell check in pages doesn't work. I went to preferences and enabled this auto spell checker and have set the language to british english. But still it doesn't work while it works perfectly in TextEdit.

    Inspector > Text > More > Language
    Only applies to selected text, like making it a particular font.
    It is not a setting that sticks. If you continue to paste in text from elsewhere particularly the Internet it will have a different or None language set to it. You need to select it and make it B.E.
    Peter

  • Bought the iphone 5 today, and when i turned it on it made me set up the language and my origin of country. Then it made me set up wi fi settings but my wi fi settings are messed up! Now i can't proceed to press next! Please help!!

    Bought the iphone 5 today, and when i turned it on it made me set up the language and my origin of country. Then it made me set up wi fi settings but my wi fi settings are messed up! Now i can't proceed to press next! Please help!!

    No
    It says ' Your ipj
    your iphone could not be activated because the activation server cannot be reached. try connecting your iphone to itunes to activate it, or try again over the cellular connection in a couple of minutes. You can also try to activate using a Wi-Fi connection.'
    HELP:(

  • Set user language by code

    Hi  Experts ,
    I want to run an application that get the current portal user language ....
    Ask if it X set to Y , else do nothing .
    My questions :
    1.  Is it right to do so ....
    2. Code ???
    3. Where/When is the best way to run it ?
    I don't want to use the personalize option ..
    Thanks ..

    Hi,
    Refer tis links,
    Setting/Getting Available Languages in the portal using code
    Set a language on the portal application
    Regards,
    Kanagaraj.

  • I have just bout a brand new ipad mini and commenced setting it up. I had to leave it for a while and switched it off. When I came back to switch it on it asked for a pass code and I haven't set one up as far as I know. Anyone know whats going on!

    I have just bought a brand new Ipad mini and started setting it up. I had updated to os7.4 and after it finshed installing I had to leave it before answering all the set up questions. When I switched it back on it asked me for a pass code which as far as I'm concerned, hasn't been set up yet. Anyone know whats going on!

    Hi robertbpage,
    Thanks for using Apple Support Communities.  If the iPad mini is asking for a password that you do not know, this article has steps you can take:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Cheers,
    - Ari

  • Adobe Acrobat Pro X - Canadian ATI and Privacy Act Redaction Code Sets

    Hi,
    Could anyone tell me if there are any redaction code sets for the Canadian ATI and Privacy Acts, like the U.S. FOIA and U.S. Pricacy Act code sets?
    Thank you.
    D. 

    Hi Dominic ,
    Please be informed that by default Acrobat supports the following two redaction code sets .
    1.U.S.FOIA
    2.U.S.Privacy Act .
    Regards
    Sukrit Dhingra

  • TS3274 My iPad App Store suddenly all went into the Spanish lanuage when all else and my Setting identifies the language to be English.  I cannot get it back to English.  It appears to be related to an upgrade which is indicatd but I do not know.

    My iPad App Store app suddenly all went into the Spanish language when all else and my Setting identifies my language as English.  I do not know how to get it back to the English language.  It appears to have come with an upgrade as it happened as there was a red circle with "3", but it does not upgrade.  All the icons in the store and the descriptions are in Spanish.

    Change Language
    1. App Store>Featured>Apple ID (at bottom of page)
    2. Tap on Apple ID>View Apple ID
    4. Enter your password
    5. Country/Region>Change Country or Region

  • HT4993 i did a master reset on my iphone 4. now when i try to set the phone back up from the start i put in the language and country, I hit next and it takes me to a screen that says connect to itunes, then will not me go any further, what do i do?

    i did a master reset on my sprint iphone 4 and i do not know what steps to take to get the phone to where i can connect to wifi after putting in the language and country... please help

    Connect it to your computer via the supplied sync cable and restore.

  • My iPad was changed to Suomi language and I can't set it back to English the settings are not the same so that does not help

    iPad changed to Suomi language can't set it back to English. The settings are not the same as the advice given by support???

    Just follow this:
    http://support.apple.com/kb/ht2371

  • HT5048 Hi, 1.34 is too much for me ... can I deselect Catalan, Croatian, Greek, Hebrew, Romanian, Slovak, Thai, and Ukrainian languages and download only the OS with less GB?

    Hi,
    1.34 GB is too much for me to download ...
    Can I deselect Catalan, Croatian, Greek, Hebrew, Romanian, Slovak, Thai, and Ukrainian languages and download only the OS with less GB?
    I tried several times but not successfull ...
    please help me to update my OS.
    thanks

    Are you asking why those non-ASCII characters are printing incorrectly? It's because the console is still treating the output as ASCII. The JVM is encoding each character as two bytes according to the UTF-8 spec, but the console is treating each byte as a separate, ASCII-encoded character. Changing the locale of the OS or the "file.encoding" property of the JVM doesn't affect the behavior of the console.
    When I run your code on my WinXP machine (leaving "file.encoding" at its default setting), I get this output: // __ System.getProperty("file.encoding"): |Cp1252|
    // __ |en_US|
    // __ |225|�|
    // __ |233|Θ|
    // __ |237|φ|
    // __ |243|≤|
    // __ |250|�|
    // __ |252|ⁿ|
    // __ |241|�|
    // __ |191|┐|
    // __ |161|�|
    // __ |251|√|
    // __ |224|α|
    // __ |223|▀|
    // __ |232|Φ|
    // __ |235|δ| The JVM is outputting the text as cp1252, but the console is treating it as cp437, its default codepage (encoding). When I change the console's encoding with the command "CHCP 1252" and run the code again, I get: // __ System.getProperty("file.encoding"): |Cp1252|
    // __ |en_US|
    // __ |225|�|
    // __ |233|�|
    // __ |237|�|
    // __ |243|�|
    // __ |250|�|
    // __ |252|�|
    // __ |241|�|
    // __ |191|�|
    // __ |161|�|
    // __ |251|�|
    // __ |224|�|
    // __ |223|�|
    // __ |232|�|
    // __ |235|�| I don't know if it's possible to change the encoding of the console in your OS, but that's not a showstopper. Just write the output to a file, then use a reasonably capable text editor to view the result. And there's no need to change all those OS/JVM settings; just specify the encoding when you open the file for writing: FileOutputStream fos = new FileOutputStream("out.txt");
    OutputStreamWriter osw = new OutputStreamWriter(fos, "UTF-8");

  • Failed to load Sorce Model: Encoding or code set not supported

    Hello,
    I have tried to migrate an informix-db with error "Failed to load Sorce Model: Encoding or code set not supported".
    Informix: 7.3.1
    Unix: Reliant-Unix 5.45
    Repository: Oracle 8.1.7 (64bit) EE     [tested with the same output 8.1.6]
    Unix: Reliant-Unix 5.44
    error.log:
    ** Oracle Migration Workbench
    ** Release 2.0.2.0.0 Production
    ** ( Build 20011121 )
    ** ORACLE_HOME: D:\wntapp\omwb
    ** user language: de
    ** user region: DE
    ** user timezone: ECT
    ** file encoding: Cp1252
    ** java version: 1.1.8.10
    ** java vendor: Oracle Corporation
    ** o.s. arch: x86
    ** o.s. name: Windows NT
    ** o.s. version: 4.0
    ** Classpath:
    D:\wntapp\omwb\Omwb\olite\Oljdk11.jar;D:\wntapp\omwb\Omwb\olite\Olite40.jar;C:\Programme\Oracle\jre\1.1.8\lib\rt.jar;C:\Programme\Oracle\jre\1.1.8\lib\i18n.jar;D:\wntapp\omwb\Omwb\jlib;D:\wntapp\omwb\Omwb\jlib\Omwb.jar;D:\wntapp\omwb\jlib\oembase-9_0_1.jar;D:\wntapp\omwb\jlib\netcfg.jar;D:\wntapp\omwb\Omwb\plugins\SQLServer6.jar;D:\wntapp\omwb\Omwb\plugins\SQLServer7.jar;D:\wntapp\omwb\Omwb\plugins\SQLServer2K.jar;D:\wntapp\omwb\Omwb\plugins\Sybase11.jar;D:\wntapp\omwb\Omwb\plugins\Sybase12.jar;D:\wntapp\omwb\Omwb\plugins\MSAccess.jar;D:\wntapp\omwb\Omwb\plugins\MySQL.jar;D:\wntapp\omwb\Omwb\drivers\mm.mysql.jdbc-1.2a;D:\wntapp\omwb\Omwb\plugins\Informix7.jar;D:\wntapp\omwb\Omwb\drivers\ifxjdbc.jar;D:\wntapp\omwb\lib\xmlparserv2.jar;D:\wntapp\omwb\rdbms\jlib\xsu111.jar;D:\wntapp\omwb\jdbc\lib\classes111.zip;D:\wntapp\omwb\lib\vbjorb.jar;D:\wntapp\omwb\jlib\ewt-swingaccess-3_3_18.jar;D:\wntapp\omwb\jlib\ewt-3_3_18.jar;D:\wntapp\omwb\jlib\ewtcompat-3_3_15.jar;D:\wntapp\omwb\jlib\share-1_1_9.jar;D:\wntapp\omwb\j
    lib\help-3_2_9.jar;D:\wntapp\omwb\jlib\ice-5_06_3.jar;D:\wntapp\omwb\jlib\kodiak-1_2_1.jar
    ** Started : Mon Feb 18 13:39:24 CET 2002
    ** The following plugins are installed:
    ** Informix Dynamic Server 7.3 Release 2.0.2.0.0 Production
    EXCEPTION : LoadTableData.run() : IDS7_SYSCOLUMNS Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSTABLES Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSUSERS Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSBLOBS Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSVIEWS Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSCOLDEPEND Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSREFERENCES Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSOBJSTATE Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSTRIGGERS Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSTRIGBODY Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSSYNONYMS Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSSYNTABLE Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSDEFAULTS Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSCONSTRAINTS Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSCHECKS Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSPROCEDURES Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSINDEXES Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSTABAUTH Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSROLEAUTH Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSPROCAUTH Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSCOLAUTH Encoding or code set not supported.
    EXCEPTION : LoadTableData.run() : IDS7_SYSPROCBODY Encoding or code set not supported.
    Please help.
    Thanks
    G. Grosche

    Looks like this error is comming from the Informix JDBC Driver.
    what version of the JDBC Driver are you using and is there anything special
    about the character set you used to create your database?
    Can you build a simple Java app to connect to the same database with the same JDBC Driver?
    Jim.

  • Catalogs and selected sets

    Hi, how catalogs qs41 and selected sets qs51 are related? can u pls explain with one example?

    Hi
    There is one best thread for this....
    Re: Code group & selected sets
    In addition to that
    catalogs : Are the code Gr & codes.
    selected sets :Selected set are the codes which are from different code gruops in simple language.
    Say example defect code  9:
    code gr X -->has codes
                                   A:
                                   B:
                                   C:
    Code Gr Y-->has codes
                                      E:
                                      F:
                                      G:
    Now I will create a selected set with codes like
    Selected set XY-->has codes
                                               A:
                                                C:
                                                F:
                                                G:
    That means from different code grups I have selected some codes which I have added in one selected set.
    similerly only few codes of one code group can be added in to selected set.
    This is advantage of selected set.& how they are related.
    Regards
    Sujit

Maybe you are looking for

  • How to use Public variables in other classes

    Please have a look at the program. In the below program, i want to use the variable 'name' in the class cl_airplane1 implementation under the method aircraft to display 'BRITISH AIRWAYS' which i am passing through the object AIR1. The variable 'name'

  • We need to restict doc.type sa for specific users only

    Hi, we need to Restrict document type SA for Particular users i.e 1. they Should not allow to post SA document types . 2. But they allow to view the documents(SA types only) Regards Ganesh

  • How can I get this flash timer to work?

    I am working on a flash game for an assignment, however when I follow the directions the timer does not count down.  I do not receive a syntax error, yet it still doesn't work.  I am stuck.  //SET TIMER Time = 40; Time_Text.text = Time; //TIMER count

  • Can I upgrade directly to Yosemite from OS X 10.6.8?

    I have not upgraded my iMac operating system OS X 10.6.8 since its purchse. Can I upgrade directly to Yosemite?

  • Edit-in-place without SAN

    I have read that you can configure edit-in-place even if you don't have a SAN. But I can't figure out exactly what needs to go into the edit-in-place URLs and also anything else they may need to be done on the server/client side. For a little more in