Re: Laptop will loose connection with the bd-r drive

Hi
Please see >>Posting Guide<<
As for GPU being faulty: I doubt you could get faulty card for the second time, unless certain batch of cards were faulty (but then seller would find it out and...

Ok, vbios should be fine on both.
Try with bios 1.7 for the board:
     A.) Download this archive and place it on your desktop. Do not decompress...

Similar Messages

  • My laptop will not connect to the internet

    My laptop will not connect to the internet but my desktop and other laptops will. Can anyone suggest anything?

    Yes I don't see problems there.
    I presume the 10.0.2.29 on the Mac is just a typo.
    There is a good chance windows is just being stupid, which is not surprising.
    Reboot the whole system.
    Restart in correct order.. modem.. TC.. 2min gap between them, and then PC.
    Test with just the PC running.
    See if you can open a web page.. no luck
    In the command window again, ping the various IP addresses.
    So ping 10.0.1.1 first.
    Then ping 8.8.8.8
    If those pings work, then try and ping a website. eg www.google.com
    Does that work or not?
    If ping works and the web pages won't open that is one of those hard ones.
    Make sure under network in the PC it is located at home.. not work or public. Windows has this nasty habit of flipping itself autonomously between these settings.. take off the firewall if it is still a problem.
    And finally go into the TCP/IP settings and change the DNS to 8.8.8.8

  • I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

    I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

    Hi, stig2013. 
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps. 
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Cheers,
    Jason H. 

  • My itunes on a windows 7 pc with dsl connection will not connect with the itunes store

    my itunes on a windows 7 pc with dsl connection will not connect with the itunes store.  Any suggestions about why not or how to get it to connect?

    After reading the whole post, I still don't capture the exact error message or code from it when you failed to install Office 2013. 
    The only clue is that "bootstrap loader error" ...
    It seems that you want to upgrade Office 2007 to new Office 2013, by default, we could complete the uninstall previous Office version and install the new Office in the installation wizard.
    At this point, if you get the install source through CD or other media. I recommand that we copy/paste the installation to local drive. Then turn off all of anti-virus and firewall, begin to setup in
    Windows clean boot mode.
    Please use a setup log to troubleshoot setup problems in Office if the installation problem still occurs.
    http://support.microsoft.com/kb/826511/en-us
    Tony Chen
    TechNet Community Support

  • My new iphone 5 will not connect with the idrive on my new BMW F30 3 Series - any ideas?

    My new iphone 5 will not connect with the idrive on my new BMW 3 Series (F30) via the lightening USB - does anyone have any ideas?

    What have you done thus far to troubleshoot your issue?  Have you powered down and rebooted your router yet?

  • HT1414 Since updating to iso6.0 I have had problems with my email exchange account syncing correctly - I keeps loosing connection with the server.

    Since updating to iso6.0 I have had problems with my email exchange account syncing correctly - I keeps loosing connection with the server.

    Are you losing the connection to iTunes on the iPad or the computer? You are saying that iTunes is updated. Of course iTunes is updated when you update the iOS software. That's a no brainer.
    If you mean that iTunes is updated on the computer, that has absolutely nothing whatsoever to do with downloading and updating apps on the iPad itself so changing the date on the iPad, signing in and out of the stores on the iPad .... Doing any of that on the iPad would have nothing to do with iTunes on your computer.
    If .... you have not been able to connect to the iTunes or app stores at all on the iPad - try this ...
    Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
    If the downloads are stalled or "waiting" - try these suggestions.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If you can't connect at all - you can also try rebooting your router. Unplug it from power for about 30 seconds and then plug it in again.

  • How to De-authorize an older PC running Windows 2000 with iTunes 7?  My itunes will not connect with the iTunes store to all the de-auth request.

    How to De-authorize an older PC running Windows 2000 PC with iTunes 7?  My itunes will not connect with the iTunes store to all the deauth request.

    The "Deauthorize All" command is only available if iTunes thinks you are currently using 5 authorizations. 
    Otherwise, you can only deauthorize the old computer by using "Deauthorize this computer" from the computer itself.
    If the old computer is no longer operable, you can't deauthorize it, but that is not a problem.

  • TS1368 I have tried uninstalling and re-installing and my pc still will not connect with the iTunes Store. I have tried just about every suggestion on the web to no avail, please help.

    I have tried uninstalling and re-installing iTunes and my pc still will not connect with the iTunes Store. I have tried just about every suggestion on the web to no avail, please help.

    When I click on the store it just never opens, I do not receive any message. I try to "refresh the page" and nothing. While having the store selected I go to "help" and check for updates and i get a message; "The iTunes updatte server could not be contacted" and it prompts me to check my internet connection which is fine. None of the items under the "Store" respond with anything.
    I ran a iTunes Diagnostics/ Under "Which Tests do you want to run" I check only "Network Connections" and the results that I receive is...
    Network connectivity:
         Network interfaces, verified
    iTunes Store connectivity:
         Internet connection, verified
         Secure link to iTunes Store, FAILED
    Does this help?

  • I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files.  The external hard drive is a Western Digital "My Book Live" 2 TB.  How do I solve problem?

    I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files.  The external hard drive is a Western Digital "My Book Live" 2 TB.  How do I solve problem?

    I also had problem accessing my WD MyBookLive after upgrading to Maverick.
    To resolve the problem, I used  Connect To Server (Cmd K) to specify the IP address.
    Then I enter a user id and password I created in the MyBookLive.
    You can also verify that you have admin access to the MyBookLive using Safari or Chrome.
    Just enter the MyBookLive IP address as the URL.

  • Laptop will not connect to the Internet

    My laptop will not connect to any internet networks, instead it shows a Red Cross where it usually has the signal.

    FranLJones20 wrote:
    It last worked before I took the computer apart to clean the cooler fan, then the day after that I noticed I could not get any internet, although sometimes it comes up with my wifi which is talk talk and says it is limited and then goes off again to the Red Cross.
    Check to see if the antenna cables are connected and the wifi card is seated in correctly.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • My 2nd generation iPod touch will not connect with the newest version of iTunes (December 2012 update). My computer(windows7) says the device is connected when i plug it in, but it will not show up in iTunes. Can anyone help?

    As said in the question, my ipod touch will not connect to the newest version of itunes. When I plug it in, my compter recognizes that a device has been connected, yet it will not show up in itunes. I didn't have this problem until I just updated to the new itunes. Someone help please!

    iOS: Device not recognized in iTunes for Mac OS X
    or
    iOS: Device not recognized in iTunes for Windows
    It still could be cable or contacts in the iPod since different contacts/conductor are used for charging and data

  • Itunes will not connect with the store.  I get no error message.  The store just won't load on the screen.

    Itunes will not connect to the store.  I get no error message, the store just won't load.

    Have you had a look here,
    Can't connect to the iTunes Store
    From here
    http://www.apple.com/support/itunes/troubleshooting/

  • PC Running LabView Program Looses connection with the FieldPoint FP1600 4.11

    If works for a while and looses communication with the PC. I tried to ping the module but it is timing out. If I reset the Power on the modules it starts working again. Any remedy of this problem

    I had a similar problem. I checked and tried lots of things. I finally solved it by: 1) moving the FP1600 to a different location and 2) putting a ferrite bead on the network cable. I think it is 2) that solved the problem. These devices are apparently very sensitive to EMI. You can read more about EMI protection in the knowledge base article:
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/2758edc0fb26d27a86256a6b0073b5d4?OpenDocument
    Another suggestion was to run the FP1600 with no modules attached to see if the problem was coming from the modules. They could then be added one-by-one to see which one, if any, was causing the problem. The solution might again be EMI protection.
    Rich

  • Will Bootcamp work with the 3T fusion drive with the Mountain Lion update?

    The notes on the update say it will work with the 3T drive but in typical minimalist fashion, Apple doesn't mention whether that includes the 3T fusion drive.  Why can't they just explain things fully?
    anyway, does anyone have an answer?

    I installed 10.8.2 update today with my 2012 MBA.  The details of the update include:  Resolves a video issue with some VGA projectors when connected to certain Mac notebooks.
    I tried using the MBA with a video projector and it found the correct resolution and connected with the projector automatically.  Using detect displays in the disoplay preference pane wasn't even necessary. 
    I hope this is the fix I have been waiting for with the 2012 MBA.
    Thank you Apple.
    RC
              (http://support.apple.com/kb/HT5460)

  • Just got the Iphone 6 and it paired BT with the car phone system okay.  But it will not pair with the audio part where I could play my recorded music with my 5-C.  The system will not connect with the phone and the message is that the settings

    My toyota Seinna 2011 refuses to connect with my Iphone 6 as a "portable player".  Message says for me to adjust the player.  On the phone it is searching for other devices but not connecting.  Now same phone is paired with the car multimedia system and will take and make calls.  Help!

    I very much doubt it  if you consider how much data Apple release to App developers
    to allow them to create apps that  work under iOS
    Audi being lazy like most of the other motor manufacturers
    They will be registered developers and as such get all the info and data they need

Maybe you are looking for

  • Is it possible to view the content of multiple lists(located in multiple webs) in one ListViewWebpart? And how can I filter a multivalue column?

    Is it possible to view the content of multiple lists, that are located in different webs as well, in just one ListViewWebpart? Could I maybe change the query programmatically so that it get's the content this way? I know that I could use the Content

  • Free Goods Flow in Return Sales Order

    Dear Experts, I have a question that is how to make the free good item(TANN in order and RENN in returns) flow automatically in the return sales order along with the REN items. Does it involve item category proposal in copy control for billing docume

  • Create Alert on custom Metric in Grid

    I'm relatively inexperienced with Grid Control so please forgive me if this is a repeat question (since my keyword search didn't result in anything useful). I would like to set up a custom alert in Grid Control that will alert me when a specific clus

  • Using checkboxes with JOption Pane

    Hi, I having abit of trouble trying to implement a search utility into my swing based program. What I want is something also the lines of the "Find" feature available in MS Word and IE. Hence I want a message, input dialog box but also a checkbox to

  • Error while update iTunes

    This has happened several times and I have yet to figure out why. Whenever I update iTunes it receives a Bonjour Service 100 ID error. It fully states: 540: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)