Re Link Oracle 9.0.1 on SUSE 7.1

Hi,
I've a problem relinking the oracle 9.0.1 binaries on LINUX SUSE 7.1
Installation was so far successful (thanx heaven) with exception of the link step(s) (of course, I can not start an instance at all => ORA-24314).
Trying "make -f ins_rdbms.mk ioracle" results in a fatal error: something link "don't know how to make target libskgxpd.a / libkulopt.a".
These .a lib's are not present at $ORACLE_HOME/... , but I found libskgxpd.so and libkulopt.so.
What is the correct statement to link oracle ?
Thanks in advance
Heiko

please ignore this thread - I have opened a newer open above. Sorry.

Similar Messages

Oracle 8.1.7 on Suse 7.3

I am installing Oracle 8.1.7 on Suse Linux 7.3. I am getting the error 'Error invoking target relink of make file /oracle/precomp/lib/ins_precomp.mk' at 65% of relinking. I tried with unsetting LD_SELF_CONTAINED as mentioned here and re-running genclntsh under $ORACLE_HOME/bin, but it gives a lot of systax errors and finally the message create library /oracle/lib/libclntst8.a The relinking error continues. Is there any other solution?

Hallo,
Can you send me the page 817_73.html ?
The link is not accessable !
Thanks
W. Ackva

How to install Oracle 8.1.7 on Suse 9.3

hello,
i want to install oracle 8.1.7 on Suse 9.3
first of all i install orarun8i.rpm:
rpm -Uhv orarun8i.rpm
and there are my problems:
Updating etc/rc.config....
fillup: Exception in ../SRC/services.c, line 344 concerniong file not opened
mv: cannot stat etc/rc.config.new: No such file or directory Done.
insserv: Service inetd has to be enabled for service oracle
insserv: exiting now!
error: %post(orarun8i-1.1-0) scriptlet failed, exit status 1
how can i solve this problem? how can i install oracle on suse 9.3?
thanx
tomi
sorry for my english

Hi ,
I suggest you to have a check with otn.oracle.com where oracle is supported with this OS. If so there must be some installation docs available.
cheers,
kamalesh jk

Oracle 8.1.7 on SuSE 6.4

Can anyone recommend a procedure to install Oracle 8.1.7 on SuSE 6.4. It is for practice only so security is not an issue. My unix/linux is basic and I am new to Oracle. I am doing an Oracle dba subject at uni this semester and need access to 8i at home to reinforce it. System is running on AMD 400MHz with 192Mb ram and 400Mb swap space.
Regards,
Peter

just read installation prerequired and run
./runInstaller. See also on www.suse.com they give an orarun.rpm to finish install.
(to start/stop database on boot/shutdown).
I tryed RH,Mdk before and I had no problem to ran Oracle on a Pentium MMX 200 with 64 Mo ram :-) 256 Mo swap with suse 6.3 whithout any patches and database files on reiserfs ... but it's just for practice to.
Eric

Oracle 8.1.5 on SUSE Linux 7.2 - Is it worth it?

Hello-
I have been trying to install Oracle 8.1.5EE on SUSE 7.2 for
days now and the installation has been the worst I have
encountered in many a year! I am thinking about scapping this
whole thing and moving onto another RDMS. If and when I get
Oracle running on Linux will I be faced with these same
installtion problems in my day to day maintenence? For such a
well known company I sure thought they could come up with
something slicker than this!
Problems so far:
JRE - Too many to list.
OraInstaller:
1. Does not show any Networking options
2. Reports not enough space for a 4GB /u01
3. Even when I select to "not" to run dbassist it does anyways
Patch:
1. I had to dig through mounds of documentation to find this
patch was neccesary.
2. Reboot. ?
dbassist:
1. Unset NLS_LANG etc...
2. SIGFAULTS halfway thru process.
At this point I am ready to bag Oracle and go with PostgreSQL
Sincerely,
Davin Flatten

Look, nobody should be going to anything other than 901 on 7.2.
Do you like to waste your time? Fastcenter sells these systems,
they install without a flaw and they're rock solid. Why install
a version that's unsupported ?!?

Oracle 9i Release 2 on SUSE 10

Dear Sir,
It is stated that i have installed SUSE LINUX ENTERPRISE SERVER 10 with SP1 with oracle check box checked during SUSE installation.
Now i am trying to install Oracle 9i release 2 on that machine i have completed almost every prerequisit for Oracle 9i R2.
But when i start "./runinstaller" after sccessfully cross "WELCOME" screen, "FILE LOCATION" screen, "AVAILABLE PRODUCTS" screen when it comes on "INSTALLATION TYPES" screen i select ENTERPRISE EDITION it gives me error (with out any error no just with HELP RETRY CONTINUE AND CANCELLED BUTTONS) at Executing Pre-requisites i click on CONTINUE button and it went on nect screen of "DATABASE CONFIGURATION" screen i select General Purpose and click on next IT STUCK ON 85 % bar.
Kindly help me in this regard
Special thanks
Malik Adeel Imtiaz
Netsol Technologies LTD

hi
Kindly re-check the packages you have install while installation of SUSE linux
Recheck the pre-requites also ........for oracle ...
Cheers

Call procedure with MS SQL from linked Oracle server

I have a procedure on a remote server that I can call from SQL*PLUS
set serveroutput on
declare rez varchar2(99); msg varchar2(99); begin radar.test('AL25',rez,msg); dbms_output.put_line('Rez='||rez);
dbms_output.put_line('Msg='||msg);
end;
it gives me the neccessary result.
But I need to call the same procedure with MS SQL from a linked Oracle server, I'm trying to do it through openquery for a while, but no success yet.
Can someone tell me what is the right syntax for that query in OPENQUERY?

Have you tried configuring Oracle Heterogenous Services/ Transparent Gateway? This would let you link Oracle to SQL Server via a database link which should solve your problem.
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com

Link Oracle VM2.2.3 server to ULN channel within spacewalk 2

Hi,
recently we decided to take OVM updates under Spacewalk control.
The issue I faced is that after creating proper channels and registering the OVM server in Spacewalk server, I don't see any channels that can be assigned to the particular client.
Details are here:
OVM server:
[root@ovm2 /]# cat /etc/ovs-release
Oracle VM server release 2.2.3
Spacewalk server:
Parent channel: ovm22_2.2.2_i386_base
Child channel #1: ovm22_i386_latest
Child channel #2: ovm22_2.2.2_i386_patch
All channels are synced to ULN, but when I try to link the channel with host I see under Systems(tab) -> ovm2 -> Alter Channel Subscriptions -> Base Software Channel: (none, disable service)
Does anyone has an experience how to link Oracle VM2 server to proper channel within Spacewalk?
Thanks,
Dmitry.

Thanks Avi,
I believe I registered them successfully as they look like el5 server for Spacewalk and it doesn't distinguish them as OVM servers.
I'll try to perform one more test, checking if it allows me to connect them to el5 channel.
In regard to keys - yes, after the key was generated I assigned OVM 2 Base Channel to it - repository uln:///ovm22_2.2.2_i386_base.
Going forward, if Spacewalk doesn't support registering and servicing updates for Oracle VM2 may be you know any other proper way of managing Oracle VM2 server updates and erratas?
Cheers,
Dmitry.

TSQL Retrieve from linked Oracle server

We're porting an Oracle system to SQL server and it's not going well...
Our system is a data warehouse that extracts data from an Oracle operational system. In the Oracle version we use database links to access Oracle. On SQL Server we've created a linked server. All OK so far.
When we try to access the linked server in TSQL we have problems:
- select on a four part name does not pass filters to Oracle and our tables are huge
- OPENQUERY works fine but won't let us pass parameters
We therefore seem to be stuck when we want to update SQL server using a single keyed access to Oracle (SQL retrieves the whole table and then filters; we're processing 20,000 records and this is not acceptable!)
I would appreciate any help you can give; I've spent most of the day searching the web for examples where people have this working, but got nowhere... help!
Thanks in advance

Have you tried configuring Oracle Heterogenous Services/ Transparent Gateway? This would let you link Oracle to SQL Server via a database link which should solve your problem.
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com

How to link oracle with xml

i want to know the coding to link oracle with xml.tq.

You're going to need to expand a little on this question, since I'm not quite sure what you mean by "link". What kind of problem are you trying to solve, so we can help... Thanks.
If you're just starting out with Oracle and XML, a book like Building Oracle XML Applications or the Oracle XML Handbook might be the right place to start, in addition to our own online documentation at http://download.oracle.com/otndoc/oracle9i/901_doc/index.htm

Linking Oracle Error

Hi
I try to install Oracle 9i in a sunblade 150 with solaris 8, however the first part of the installation is correct, but when start linking Oracle Net show me this message:
Error in invoking target ncontab.o of makefile /oracle/app/oracle/product/9.0.1/network/lib/ins_net_client.mk
Please
Would you help me ??

Hi
I try to install Oracle 9i in a sunblade 150 with solaris 8, however the first part of the installation is correct, but when start linking Oracle Net show me this message:
Error in invoking target ncontab.o of makefile /oracle/app/oracle/product/9.0.1/network/lib/ins_net_client.mk
Please
Would you help me ??

Oracle 9.2.0 on SuSE 8.0 How to link

http://www.visi.com/~mseberg/o9howto.html

There are 2 things that need to be done prior to running the runInstaller program. As the user "root" type "xhost +localhost" (without the quotes). You may also use the TCP/IP address instead of using "localhost". Now, as the Oracle user type "export DISPLAY=localhost:0.0", then issue the command runInstaller.

Compiling Apache 1.3.9 & PHP 3.0.12 to use Oracle 8.1.5 on SuSe 6.2

Hi!
I am trying to compile the above packets but am running into massive problems.
PHP3 compiles well, if i try to use the "normal" static module for Apache, but the Apache configure script says that it needs an ANSI C compiler and stops.
I am using GCC 2.7.2.3 with the bugfixes from SuSe.
Since that did not work I tried the configuration as a Dynamic Module. The Apache "Readme.config" explains two ways to do so, but the first has the same problem with GCC and the second (via APXS) compiles Apache without problems, but PHP3 wont compile since it does not find a library. The exact error is: "/usr/i486-linux/bin/ld: cannot open -lclntsh: No such file or directory"
I found a libclntsh.so.8.0 in the oracle/lib directory, but since i fumbled around with this library (i tried ln -s libclntsh.so.8.0 libclntsh.so) sqlplus says libclntsh.so.8.0: cannot find file data: no such file or directory (even now that the link is deleted again).
And PHP still wont compile. Any ideas would be welcome.
P.S.: Is it normal that Oracle has to be told NOT to create a database during install, TO create a database???
We worked for 3 days on the Oracle installation and that was the only way to install Oracle without errors.
thx
Uwe Schurig

Lee Bennett (guest) wrote:
:Hi
:I have successfully installed Oracle 8.1.5 Enterprise edition
on
:Suse 6.2 and applied the 8.1.5.0.1 patch set,
NO!
SuSe 6.2 have a patch file for Oracle made from their developers.
Never use Oracle 8.1.5.0.1 patch file that doesn't work because
us bugged.
Use SuSe 6.2 Oracle patch set.
(don't remember the web page where you can download it but a
search with word "oracle" from SuSe homepage will lead you to
it)
-Stefano
null

Install oracle 9.0.1 on suse 8.1

Hy all,
during installation Oracle client on Linux (suse 8.1)
i get the following error message (linking the ins_plsql.mk):
/usr/lib/gcc-lib/i486-suse-linux/3.2/../../../../i486-suse-linux/bin/ld: cannot find -lclntsh
collect2: ld returned 1 exit status
Who can help?

I had this problem before, the soultion was to do either of the following option then after finsihin press on retry and i hope it will work.
(The soultion i got from an Oracle OCP, so thinks to him)
Solutions for the relinking problem seen with Oracle 9.0.1 on Red Hat 7.1.
Option 1: (remove "-z defs" from genclntsh file) (Workaround)
1. When you get errors from OUI installer, open a window, and cd to the Oracle Home installation target location
2. Set Oracle environment ORACLE_HOME to this target directory.
3. Use editor to modify $ORACLE_HOME/bin/genclntsh file, to remove -z defs from it.
4. Then run this script $ORACLE_HOME/bin/genclntsh to create Oracle libraries.
5. Go back to OUI error window, and click on retry bottom to continue.
Option 2: (update the binutils)
You have to follow these steps to solve the re-linking problem:
1. Update the binutils-2.10.91.0.2-3 to binutils-2.10.91.0.4-1
2. You can get the binutils patch at the following URL:
http://www.ibiblio.org/pub/Linux/kernel.org/pub/linux/devel/binutils/binutils-2.10.91.0.4-1.i386.rpm
3. Relink Oracle binaries.

Error in install of any link Oracle 9.0.1

Dear All
I am installing Oracle9i on Sun Sparc Solaris and I get the
following errors. (this happens for about 87 files)
I'm not sure what the problem is.
--- error_mesage --------------------------------
Error in checking existance of the link,
errno:79:/home/oracle/app/product/9.0.1/JRE:No such file or
directory
Error in checking existance of the link,
errno:79:/home1/oracle/jre/1.1.8/bin/javakey:No such file or
directory
Error in checking existance of the link,
errno:79:/home1/oracle/app/oracle/product/8.0.4/Apache/jdk/jre/li
b/sparc/libmon_sun4m.so:No such file or directory
From installActions.log these messages were not found.
These error occurs, but oracle9i starts normally.
There are directory and files properly when I confirm it after
installation.
In addition, as for those files, proprietary rights are set
justly.
Any help is much appreciated.
thanks
DT

please ignore this thread - I have opened a newer open above. Sorry.

Re Link Oracle 9.0.1 on SUSE 7.1

Similar Messages

Maybe you are looking for