Re: Local vs Remote Folder

> However, when I try to use W: as the root folder
> in DW, I get an error that the "selected folder does not
contain the
> current
> sires' home page. The site map cannot be built"....
That's not an error - it's an alert. And it only means that
you have never
defined the home page by right clicking on a file and so
designating it.
But this would be for your LOCAL site, not the remote site,
correct?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Tim Ferguson" <[email protected]> wrote in message
news:[email protected]...
> I'm actually about 10 feet from the web server which is
in our building
> and
> as admin, I have a drive mapped to the DOCS folder on
VOL1 which is the
> root
> of the district web site. However, when I try to use W:
as the root
> folder
> in DW, I get an error that the "selected folder does not
contain the
> current
> sires' home page. The site map cannot be built"....
>
>
>
>>>> On 4/21/2008 at 9:18 AM, Murray
*ACE*<[email protected]>
> wrote:
>> W: on my log-in
>
> So, you have a drive mapped to the production server?
Your access is via
> the network, and not via FTP?
>
> This should work fine in DW8.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com (
http://www.dwfaq.com/ ) - DW FAQs,
Tutorials &
> Resources
> ==================
>
>
> "Tim Ferguson" <[email protected]> wrote in message
> news:[email protected]...
>> With DreamWeaver 3 I was able to create the site
using a local folder on
>> my
>> C: drive and then the remote folder was the actually
site which is mapped
>
>> as
>> W: on my log-in. In DreamWeaver 8, I'm not able
accomplish the same and
>> hope someone can correct what I'm doing incorrectly.
>>
>> It is extremely aggravating to work on a web page
getting all the links
> as
>> they should, etc., only to transfer it to the actual
web server and have
>> the
>> links not work because they are still pointing to
the local drive. Ok, I
>> know if I was doing it correctly, they would be
perfect, but....
>>
>> Thanks for your time and trouble, it is appreciated,
>>
>> Tim
>>
>
>
>

Similar Messages

Live Video Plays Locally But Remotely Only Skin Is Visible

Hi Guys,
I have tested other embedded videos and they will play remotely so I know the hosting site is working.   Can anyone please look and tell me what I can try to make the vid work?   Currently, the live video will play locally and remotely from this computer where all the files are stored but only the skin is visible on any other remote computer's web browser.
I will post any info you ask for.   I have been working on this forever.   Please, someone who is good at this help me?
Here are my files look (I can't figure out how to blow this up larger - can you see it?):
I will try whatever you suggest.
Chris
The Adobe Dreamweaver Tech Support said to post here and that the Expertise Team (you I suppose) would figure it out. I am running Windows 7 64-bit OS.
My live video is being broadcast by Adobe Flash Media Encoder to Adobe Flash Media Server 4 and inserted into Dreamweaver. Dreamweaver Support watched me re-create the Flash file and import into Dreamweaver and we looked at it for hours together. In the end, they suggested I post here because we could not figure it out / it is not supported. Ideas?   Can I provide any other helpful info?

Most likely it's a URL problem. What the player is looking for is the remote URL to the server... not "localhost" or some other address on your local machine.
So when you config the Adobe Flash Media Live Encoder, there is a dialog box asking for FMS URL:
Your remote URL will look something like this:
rtmp://76.192.182.133/my_streamer
where the protocol is rtmp, the Web address is the address of your host server and the name of the application you are using to do the streaming is the last part of the address.
Of course this means that you will need to have an application already residing on the server, it's not enough to just have access to a Flash Media Server, you also need an application to do the streaming.
The next important part is to give your stream a name, it can be whatever, but this name will be used on the Web page.
something like:
Stream: test_stream
With those settings, here is what a Web page would look like:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<script type="text/javascript" src="swfobject.js"></script>
<title>Streaming Test</title>
</head>
<body>
<div id='mediaspace'>
<script type='text/javascript'>
    var so = new SWFObject('player_new.swf','mpl','500','410','9');
    so.addParam('allowfullscreen','true');
    so.addParam('allowscriptaccess','always');
    so.addParam('wmode','opaque');
    so.addVariable('image','live_intro.jpg');
    so.addVariable('file','test_stream');
    so.addVariable('bufferlength','10');
    so.addVariable('streamer','rtmp://76.192.182.133/my_streamer');
    so.write('mediaspace');
</script>
</div>
</body>
</html>
that's the entire page, just copy and paste into a new html doc in code view.
See where the variable 'file' is the name of your stream 'test_stream'
And the variable 'streamer' is the URL of your host FMS with the application name at the end of the address.
This is working code from the JW Player using swfobject 1.5 (notice the call to swfobject in the <head>).
There is also an image (make it 500 x 410 or whatever size you set your player to) that sits in front of the player until someone click the play button.
So to make this work, you need 3 files, the JW Player itself, the swfobject file, and a thumbnail for before the Live streaming starts.
You can download them all here from my site:
http://www.cidigitalmedia.com/tutorials/streaming/player_new.swfswf
I changed the file extension to .swfswf so that you can download and not have the browser open the .swf. Once you have the file, change the file extension to just .swf
http://www.cidigitalmedia.com/tutorials/streaming/swfobject.js
swfobject for Flash detection, also great for adding alternate content for non-Flash browsers.... but that's another story.
and an image here:
http://www.cidigitalmedia.com/tutorials/streaming/live_intro.jpg
download to your screen and right click and "Save Image.
Put all the files in the same folder as your new HTML Web page.
Change the FMS URL to your host URL.... I'll include a photo here:
http://www.cidigitalmedia.com/tutorials/streaming/streaming.jpg
That is where your URL info goes. When you click the "Connect" button, you should get a message in the "Encoding Log" tab that tells you whether the connection was successful of not.
For more info on the Adobe Flash Media Live Encoder:
http://forums.adobe.com/community/flash/flash_media_live_encoder
You now have everything needed to properly display a Live stream... provided that is that your FMS is correctly set up and that you actually have a working, streaming application installed on the server.
One more thing:
"I even tested another embedded video just to make sure the host wasn't the issue and that video played live perfectly even remotely but my feed would not."
A Live feed is completely different from prerecorded videos. It uses a different protocol, Player configuration is different, and of course you need an actual application that streams Live video.
Best of luck! I hope you can get this going!
Adninjastrator

Synchronizing local and remote sites

Greetings
I created a site locally and then FTPed it up to a server at
my ISP. The site was working fine until I made a number of changes
that I note below. When in DW and I try try to preview in a
browser, I am unable to view any of the files in any browser
because DW is unable to locate the files locally and remotely.
The error message I get is:
Firefox can't find the file at
/______/______/_____/_____/ThankYouVeryMuch/Website/tyvmi
3/index.htm.
The changes that were made to the site:
- I reorganized my folders locally thereby creating a new
root folder. When I tried to add 3 pages, I received several error
messages. One of them was that DW was unable to locate the home
page. Another was that it was unable to create the site map and if
I'm not mistaken DW was unable to create cache files.
- My client had a friend add some Google analytics to the
site. This person also created an XML site map. Obviously, the
local and web sites were not synchronized so I was receiving more
error messages.
- I then downloaded the site to a new directory in the new
root folder I created above. This downloaded site is my local root
directory in the Site manager and is located at
./______/______/_____/_____/ThankYouVeryMuch/Website/tyvmi
3/index.htm
- These are my current directories for the site
thankyouverymuchinc.com:
Site name: Thank You Very Much Inc
Local: ThankYouVeryMuch
----------> Website
-------------> tyvmi 3
---------------> index.htm
---------------> pages
Remote: host: ip address
----------> www/htdocs/
---------------> index.htm
---------------> pages
Many thanks
Marlene

Do you have a testing server defined?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"troika22" <[email protected]> wrote in
message
news:[email protected]...
> Greetings
>
> I created a site locally and then FTPed it up to a
server at my ISP. The
> site
> was working fine until I made a number of changes that I
note below. When
> in DW
> and I try try to preview in a browser, I am unable to
view any of the
> files in
> any browser because DW is unable to locate the files
locally and remotely.
>
> The error message I get is:
> Firefox can't find the file at
>
/______/______/_____/_____/ThankYouVeryMuch/Website/tyvmi
3/index.htm.
>
> The changes that were made to the site:
>
> - I reorganized my folders locally thereby creating a
new root folder.
> When I
> tried to add 3 pages, I received several error messages.
One of them was
> that
> DW was unable to locate the home page. Another was that
it was unable to
> create
> the site map and if I'm not mistaken DW was unable to
create cache files.
>
> - My client had a friend add some Google analytics to
the site. This
> person
> also created an XML site map. Obviously, the local and
web sites were not
> synchronized so I was receiving more error messages.
>
> - I then downloaded the site to a new directory in the
new root folder I
> created above. This downloaded site is my local root
directory in the Site
> manager and is located at
>
./______/______/_____/_____/ThankYouVeryMuch/Website/tyvmi
3/index.htm
>
> - These are my current directories for the site
thankyouverymuchinc.com:
>
> Site name: Thank You Very Much Inc
>
> Local: ThankYouVeryMuch
> ----------> Website
> -------------> tyvmi 3
> ---------------> index.htm
> ---------------> pages
>
> Remote: host: ip address
> ----------> www/htdocs/
> ---------------> index.htm
> ---------------> pages
>
> Many thanks
> Marlene
>

Unable to create remote folder

When I attempt to go to the data bindings on an ASP form I
have, I get the following error:
Unable to create remote folder 550 _mmdbscripts: Access
Denied
The form works fine, but I can add any new fields to the form
because I get this error when I attempt to update the field list
under server behaviors.
Any suggestions?

Does your FTP hang on all sites? Or this this the only one?
How many sites
do you have? Does it hang with all folders or only these
specific ones?
What happens if you create a new folder in the site and try
to upload that?
Such curious FTP problems in DW are almost ALWAYS the result
of an
interference from your local firewall - are you running one?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"hfeurstein" <[email protected]> wrote in
message
news:fe7uu9$34r$[email protected]..
>I am so glad you are out there - this is the most
responsive forum I have
>ever
> experienced:)
>
> Essentially I am trying to upload my site from my hard
disk to the ftp
> server
> using DW.
>
> Each time I make an attempt, it will copy a few files
and then I will get
> the
> error message as described in my initial posting. First
I thought that it
> had
> to do with my file and I deleted an entire folder from
my hard disk. Upon
> my
> next attempt to upload, the same error message occurred
with a different
> folder. And each time I attempt to upload the same thing
will happen with
> "a"
> folder...
>
> In the last two hours while having this correspondence,
I have switched to
> FireFTP - a free FTP by Mozilla and the entire site is
uploading swiftly
> and
> without any error messages - I am only half way through
but the three
> folders
> that have given me errors in DW have already been
uploaded successfully.
>
>
>

How to mount a remote folder with VPN

Dear All,
I setted up a mac mini server with VPN. It goes through a rooter and I open some ports to be able to connect with VPN.
From max MacBook pro, I installed the VPN profile and I can connect the VPN to my remote server. The remote server has a public static adresse.
Now I am connected with VPN, but I can not moiunt a remote folder. I press command+K and I entered:
afp://username@ip-adresse/Groups
But it return an error message
"There was a problem connecting to the server "46.xx.xxx.xx".
The server may not exust ot it unavailbale at this time. Check the server name ot IP address, check your network connection, and then try again
But the server is up and reachable!
Thank a lot for your advises.
Cheers

I even tryed with
afp://ip-adress
after being connected with VPN,
Should do something else from my router?
When I go to my Macbook system preference and the to network and look at my location, I can see a green label to the VNC and and a IP adress is provided my the VNS server which belong to the pool I configured and out of the local pool

Disable 'retrieving remote folder information'?

Is there any way to disable the 'retrieving remote folder
information' query? It causes a delay of about 10 seconds every
time I switch into the expanded local and remote sites view. It is
incredibly annoying.
I work in the full-screen file and folder view quite often. I
find it easier to browse the local view in full-screen mode. I
rarely browse the remote folders and files so I could care less if
the view is up to date. I would refresh it manually, if possible.
Does Dreamweaver CS3 behave the same way? I would gladly
upgrade to get rid of this annoying behavior (along with the
'background file activity' dialog).
Thanks.

Meriphew wrote:
> Hi all - I'm using DW MX and trying to upload files to a
remote server(I'd
> previously used Frontpage, this is my first site using
DW). When I click on the
> 'Put Files' arrow, I get a messg that reads "Retrieving
remote folder
> information for /meriphew." I can't tell if it's
actually doing anything or
> not, as there's no status bar. Is this normal or have I
run into some kind of
> error/freeze? Thx for any assistance.
>
>
>
It is normal, Dreamweaver is a snail-slow FTP program.
But after a while, the message should change and you should
see your remote files appear in the
remote files side. No?
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html

Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

How Do I Move Local OneDrive Storage Folder to Another Location?

Howdy,
I've just installed the new 9926 build and wanted to sync my OneDrive data. I am using native VHD boot and so OneDrive setup wizard automatically chose the local
%USERPROFILE%\OneDrive folder as a local storage for the data obtained from OneDrive.
However, I don't want the data to be stored on my VHD drive. The OneDrive wizard didn't provide any Back button to change settings for the local storage location, so I had to use the location I've chosen.
Now how do I move the OneDrive folder to another location? Previously you could right-click OneDrive folder, chose Properties and change the location on the Location tab. Now there isn't such a tab.
Is it a step back in usability for OneDrive feature?
How do I move local OneDrive cache folder to another location?
Thank you.
Well this is the world we live in And these are the hands we're given...

I've found out that you have to unlink OneDrive from your PC and repeat configuration steps to change the location of OneDrive folder on your PC, just like you did so in pre-Windows 8.1 builds.
Is it a new behavior and MSFT wants to get rid of Location feature in newer Windows 10 builds, or it is just a temporary issue because some parts of Windows 10 TP code are based on pre-Windows 8.1 codebase?
Thank you.
See also
Move the OneDrive Folder
Well this is the world we live in And these are the hands we're given...

[Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

FTP Time Out - Cannot Open Remote Folder

I am using Dreamweaver CS3 and windows Vista. I have set-up site definition (with user id and password) and used to be able to connect to the remote server, open remote folders, and upload and download files using Dreamweaver. However, all of sudden I cannot open the host directory remote folder where all of my website information are, It just times out. I can connect to the server, if I don't specify the host directory. I changed FTP time out in dreamwever to increase ftp time, but still it times out. I used to be able to open the host directory without any problem, and I have not changed any information in site definition. I have tried to use fireFTP, and I can connect to the server but cannot open the the host directory, same as in Dreamweaver.
Other pople working on the same website, with same site definition with the same user name and password can connect and open the same host directory remote folder using Dreamweaver on their pcs without any problem. So it seems like the problem is with my pc or Dreamweaver setting, even though I have not changed any settings.
Does anyone know what would be causing this problem and how I can resolve this issue? Thanks.

I found out that the remote folder which I can't open (host directory) contains many wmv video files, which might be causing the problem of timing out using Dreamweaver on my PC. Other people can open the same folder using their Dreamweaver on their PCs.
I can connect to another remote server and open all the folders in Dreamweaver without any problems.
Is there any settings I can change in Dreamweaver or on PCs to resolve this issue, or any other suggestions? Thanks.

When you expand to show local and remote sites, in DW CS6 how do I get the local to be on the left?

When you expand to show local and remote sites, in the previous verions of DW, the files type (local or remote) selected when not seeing both, automatically came up on the left. I liked local when I am editing and when I am ready to upload I expand to see both local in remote. Before, the one you had selected, in my case local, was always displayed on the left. Now in CS6 when I have local selected before I expand, the local is on the right and remote on the left. For me that is not correct. I find that having local on the left works best for me like reading, left to right, I want the local on the LEFT so I can put the updated from left to the remote on the right.
-->In DW CS6 how do I get the local to be on the left?

Thank you so much! That did it!

Apple Remote Desktop ARD 3.7 cannot drag files from local to remote.

Apple Remote Desktop ARD 3.7 cannot drag files from local to remote. I've been able to drag n drop folders and files from my local to the remotes for years until the update to 3.7. Anyone else experiencing this issue? I've tried changing preferences. No luck. Maybe I'm missing a setting somewhere.
I'm on 10.8.5. Remote is same with 3.7 client. This happens with multiple remotes.

Let me guess. The Get and Send clibboard contents buttons are greyed out too?
It is only affecting me on clients already upgraded to 3.7. None of the clients on older versions are affected.
ARD is also crashing a lot.
Most of the time I go to a screen share to a client it takes way too long, so I clock Stop, then try to connect again and works straight away.
Hopefully a patch will be released soon.

Steps to setup and configure Node Manager on local and remote machine

Hello,
I am using WLS 10.3 on Windows.
I have two machines, One cluster and two managed servers (one on each machine) created under a domain. I have used configuration wizard to create the domain.
I have gone through documents on Node Manager and found what to configure. But I have not found when to configure. In other words I want to know what is the sequence of steps if I have to set Node Manager on my local machine (in which domain exists) and on remote machine.
Please let me know the sequence of steps I need to follow to set and configure the Node Manager on local and remote machine. I want to use Java Node Manager (not the Script node manager).
Thanks,
Sanjay

Hello,
Ok, let me tell you what I have done till now.
1) Installed WebLogic 10.3 on machine A (local machine, on which I have created domain and my Admin Server is running. Also Managed Server 1 is created on this machine).
2) Installed WebLogic 10.3 on machine B (remote machine, on which Managed Server 2 will be created).
3) On machine A I used the configuration wizard and create a domain. While creating the domain I did the following:
i) Created two managed servers.
ii) Created a cluster
iii) Assigned Servers to cluster.
iv) Created two machines.
v) Assigned servers to machines (Admin Server and MS_1 to machine A and MS_2 to machine B).
4) Sarted Admin Server.
5) On the Admin Console I made some configurations for the Node Manager on Machines -> Machine A -> Node Manager. Assigned the values:
i) Type (SSL)
ii) Listen Address (IP_Address of machine A)
iii) Listen Port (5556)
6) Similarly did for Machine B.
So till now phsically the managed server (MS_2) directory and configuration is not there on Machine B (its only configured on machine A because I created the domain on Machine A).
Now I want install/configure/setup NM on both the machines. Start my both the managed servers using Admin Console (which will use the node managers).
What are the sequence of steps I need to follow my task?
Any help and suggestions are welcome with warm regards.
Thanks,
Sanjay

Looking up Identical EJB both locally and remotely

prior to posting this request, i have read and
attempted multiple solutions to this problem
suggested in the forums to no avail.
if i have the same EAR, which contains both
an EJB Component and a WAR, deployed to multiple
servers, is it possible to look up an EJB both
locally and remotely?
for instance, on the server performing the lookup,
EJB A is deployed. i successfully look it up
via the following call:
InitialContext context = new InitialContext();
Object ref = context.lookup(name);
return javax.rmi.PortableRemoteObject.narrow("EJBA", EJBAClass.class);
subsequently, i try to lookup the same ejb
on a remote server by performing the following
calls:
Properties environment = new Properties();
environment.put("java.naming.factory.initial", "com.evermind.server.rmi.RMIInitialContextFactory");
environment.put("java.naming.provider.url",
"ormi://remoteserver:23791/application");
environment.put( "java.naming.security.principal", "user");
environment.put( "java.naming.security.credential", "password");
jndiContext = new InitialContext(environment);
Object ref = context.lookup(name);
return javax.rmi.PortableRemoteObject.narrow("EJBA", EJBAClass.class);
however, i either receive an authentican exception, saying "user"
doesnt have access to allication "application", or a null pointer
exception int the RMIInitialContext.
on my local application, i have defined my ejbs in the web.xml
as defined by the spec. the ejb component is marked as remote="false"
in my orion-application.xml as well.
the version of oc4j is 1.0.2.2.1.
any directinon on this would be greatly appreciated.
thanks,
ted rice

as a follow up to my own question, using a application
client, outisde of the web application i can
successfully look up my ejbs locally and remotely.
however, from within the web application, i constantly
receive a ClassCastException.
if no one can tell me how to resolve this, could someone
let me know if they have in fact looked up the
same EJB, both deployed locally and remotely, from the
same web application.
thanks,
ted

Re: Local vs Remote Folder

Similar Messages

Maybe you are looking for