Re: LOCOCKPIT DATASOURCES IN DEVELOPEMENT SYSTEM

HI
KINDLY READ FULL QUESTION AND CLARIFY.
IN A SYSTEM LAND SCAPE OF DEVELOPMENT-QA-PRODUCTION
EG: IF I AM USING LO COCKPIT -
IF I WANT TO INSTALL A DATA SOURCE FROM R/3 WILL I BE ACTIVATING DATASOURCE IN R/3 DEVELOPMENT SYSTEM R ELSE ON PRODUCTION SYSTEM.
IF I AM DOING THE ACTIVATION ON DEVELOPMENT SYSTEM THEN WHEN WE GO TO PRODUCTION DO I AGAIN NEED TO DO THE DELTA SETTINGS AND SETUP ON PRODUCTION SYSTEM R/3--????
IF I AM EXTRACTING DATA INTO BW DEVELOPMENT SYSTEM, WHEN I TRANSPORT IT TO QA R PRODUCTION DO I AGAIN NEED TO DO SET UP LIKE REPLICATION OF DATASOURCES FROM R/3 TO PRODUCTION SYSTEM BWWHAT IS THE METHODOLOGYKINDLY EXPLAIN IN DETAIL.
SO I AM VERY MUCH CONFUSED. ABOUT WHAT R THE ACTIVITIES I NEED TO DO ON DEVELOPMENT SYSTEM R ELSE PRODUCTION SYSTEM.
KINDLY CLARIFY MY DOUBTS
THANKS AND REGARDS
NEELKAMAL

Hi Neel,
when you install (transaction RSA5) a datasource in DEV you have to put this activation in a change request. The same for Logistic Cockpit delta activation (LBWE).
So, to have the same situation (activated datasource and delta) in QA and PRD.
On the other hand, QA and PRD are not open for any modification, therefore a direct activation is not allowed.
Clearly, when you import your change request (with the related activation), THEN you have to do a replication of the source system in BW (in order to let BW see the updated situation).
Step by step for LO:
activate the datasource in RSA5.
adjust it in RSA6.
activate delta (green light in LBWE)
transport CRs in the other environment (and take care of everything in this case...)
replicate datasource in BW
(remember that setup job and delta init and collective job have to be executed in every environment
Bye,
Roberto

Similar Messages

Regarding transporting datasource from DEVB system to QA system

HAI
Im extracting data from Oracle Source Tables by using DB-Connect.
I created datasource in RSDBC like 6DB_ZPMLEVENTINFO.
I want to transport this datasource from development system to QA system .
So how can i transport it from development system to QA system .
pls tell me
i ll assign the points
bye
rizwan

Hi,
Which Source System (DB-Connect) is connected to your BW QA system. You have maintain Source system mappings for datasource transports
AWB --> Tools --> Mapping of the source system names..
Once you have configured this screen, you would be able to transport your datasource.
Uday

Any table to check A version of datasource in development and quality syste

Hi Experts,
1. Do we have any tables to check A version of objects once the datasource moved to quality system?...
2. I have moved some datasources from development to quality system and in the log of the request i am seeing the error message like below
DataSource xyz does not exist in source system qa system of version A
Mapping between data source xyz and source system QA is inconsistent
DataSource xyz does not exist in source system QA of version A
Field field1 will not be delivered from DataSource xyz in source system qa system
Field field2 will not be delivered from DataSource xyz in source system QA system
Field nfield3 will not be delivered from DataSource xyz in source system QA
Field field4 will not be delivered from DataSource xyz in source system QA
Field field5 will not be delivered from DataSource xyz in source system QAT
How to handle this type issue while transporting issues..
Could any one help me to resolve this issue.
Thanks,
Vachan

Hi Jr,
thanks for your reply...Please give me the correct path to check the mapping..
Thanks,
Vachan

Unable to login in sap development system

When iam applying service packs, some has restarted the server. After restart the system everything is fine MMC is started. Database connection is ok. tp connection ok. Every thing is ok. When iam trying to login sap system I entered ddic user 000 client. Iam not able to login to my system.
The error which iam getting is Sid: SYSTEM MESSAGE SYNTAX ERROR IN PROGRAM SPAMS380.
I'am not able to login any client, with ddic,sap*, any user id.
Please give me the solution quickly.
I'am Applying Support Packs in Development system.

Hi,
try to execute this query..
logged in the Database Oracle level, as SysDBA & executed the SQL Statement
delete from <HOSTNAME>.<SID>.<object_owner>.USR02 where BNAME='SAP*' and MANDT='000';
after this bring down the instance and restart. then SAP will re-create SAP* userid and with default password "PASS" (case sensitive).
OR
login/no_automatic_user_sapstar=0
after restart the instance.
hope this info helps you!
Rewards points if helpful
Thanks
Pankaj Kumar

New Development system copy from Production

Hi All,
Hope you can help me out here with some ideas.
We are currently planning to implement a new SAP BW Development system, and for this we would like to make it a 1:1 copy of our current production system. Meaning all from customizing, ABAP, workbench objects etc.
But what we do not want is all the transaction and master data in infoobject, cubes etc., we are only interested in the structure and objects. Therefore we can rule out "System copy".
My question is then, is there any other ways to do this when system copy is a no go? I know we can do client copy but then we will not get all the workbench / ABAP programs which we need.
Any ideas on how to do this?
Thx. in Advance

Hi Rasmus,
But what we do not want is all the transaction and master data in infoobject, cubes etc., we are only interested in the structure and objects. Therefore we can rule out "System copy".
Options 1: As BI objects are cross client , copying client will not solve your purpose 100%.
You can perform system copy and then clean up data in DEV
Option 2: You can create a new Development and then create TRs for required configuration objects and move to new development system.
Option 3: Use SLO tools to perform container copy without any data.
Hope this helps.
Regards,
Deepak Kori

VISA Write differs between TS Development System and LV Run-Time Engine

Hi all
I made an application on LabVIEW to test BERs (Bit Error Rates), and I used VISA Write between two COM ports to exchange data.
Everything works fine using just LabVIEW.
Afterwards, I used TestStand to call my application (VI). The LabVIEW adapters from TestStand were set to Development System by default, and everything works OK!!
Finally, I needed to disable the development system, and set the LabVIEW adapters from TestStand to LabVIEW Run-Time Engine and I notice that the speed of the data exchange between the two COM ports decreased dramatically.
The only difference was the speed...because all the data (changed slowly in this case) arrived correctly on the other COM port too.
The symptom was the same as decreasing the baud rate...but the baud rate and all the other configurations remained the same. The only difference was the change between Develpment System to Run-Time Engine to notice this decreased speed between the exchanged data using VISA Write.
Any solutions for this?
Thanks in advance
Joao
Solved!
Go to Solution.

Joao,
you state that using the LV Developement System as execution platform for your LV code modules result in faster datatransfer between the COM ports than using the LV Run-Time Engine.
So i am pondering: Does this refer to TS at all?
Please check the following:
Run you communication using a sole LV application in LV Developement System. This should be fast. Now build an executable of this application and run that one. Do you see the same behavior?
If there is no difference in a sole LV approach, there have to be some settings in the TS approach making this slow. So please let us know:
Are there different modules involved in that data transfer (which in fact points to the reply Christophe made)?
What about loading/unloading options of the modules?
How big is the hierarchy of the modules, e.g. is it necessary for the RTE to load stuff the Dev Env has already in memory due to loading a lvproj.......?
Could you provide a simple example sequence+modules showing this behavior?
What versions of LV and TS are you using?
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Error -17600 when switching from LabVIEW Development System to LabVIEW Run-Time Engine in Adapter Configuration

I receive an error message (code -17600) while loading my test sequence after switching from LabVIEW Development System (2009 f3) to LabVIEW Run-TIme Engine using the Adapter Configuration.
ErrorCode: -17600,
Failed to load a required step's associated module.
LabVIEW Run-Time Engine version 9.0.1f3.
When I switch back to the LV development system, everything is OK, and the sequence loads and runs perfectly.
My TestStand Engine Version is 2012 f1 (5.0.0.262).
I'd appreciate any help on this issue.
Roman

Hi Roman,
There are a couple of things you can try:
1) Determine if the LabVIEW RunTime Engine is corrupted in some way. Create a new simple VI with no sub-VIs, using the same LabVIEW Development system you used for mass-compiling the VIs. Create a TestStand step that calls this VI and ensure it runs correctly. Now switch your LabVIEW adapter to use the RuntimeEngine and choose the "Auto detect using VI version" option.
Check if the simple VI is loadable and runs without errors in TestStand.
If the step generates the same error, you should try a re-install of the LabVIEW development system.
If not, its most likely that there is some VI you are using that is not loadable in the LabVIEW Runtime Engine because:
1) Some sub-VI is still not saved in the right version or bitness. Open the VI heirarchy of the top-level VI that you are calling from TestStand and examine the paths of all the sub-VIs to check if they were in the folder you masscompiled and re-save any that are outside this directory.
Also, when you try to close the top level VI, do you get a prompt to save any unsaved files? If so, they could be the sub-VIs that are not saved in the right version. Save all of them.
Check if you are loading any VIs programatically and if these are compiled and saved in the right version as well.
2) There is some feature you are using in your LabVIEW code that is not supported in the LabVIEW RunTime Engine. To check this, add your top-level VI to a LabVIEW project and create a new build specification and create a new executable from this VI.
    Right-click "Build Specifications" and choose "New->Application(EXE)".
    In the Application Properties window, select Source Files and choose the top level VI as the start-up VI.
    Save the properties.
    Right-click on the newly created build specification and choose Build.
Run this executable (it will be run using the LabVIEW RunTime) and check if the VI has a broken arrow indicating that it cannot be loaded and run in the LabVIEW Runtime Engine.
You might need to examine your code and find the feature which is not supported in the LabVIEW RunTime and find an alternative.
Another thing i forgot to mention the last time around is if you are using 64-bit LabVIEW with 32-bit TestStand, then executing code using LabVIEW RTE from TestStand will not work since the 64-bit LabVIEW RTE dll cannot be loaded by the 32-bit TestStand process.
If none of the above steps resolve the issue, consider sharing your LabVIEW code so i can take a look.
Regards,
TRJ

"Open VI Reference" slowly in development system

Hello,
One of our programs has a plugin structure. We open more than 50 VIs over VI Server. This is fast in runtime system, but slowly in the development system. The problem is the function "Open VI Reference". If you try to open an Ref to a very small vi, it takes nearly 2s per VI. In runtime system this is done in 2-4ms.
So the program takes ages to start in development system.
Is there a way to speed this up?
Thanks
Sletrab
Attachments:
Bild348.png ‏99 KB

Is it always slow or fast the first time? Could it be that you're not closing the ref afterwards?
And/or debugging setting in the vi's,, which ofcourse is turned off in a .exe
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

LV 8.6 will Not Compile in LV 2010 - Labview 10.0 Development System Has Encountered a Problem and Needs to Close

I submitted this support request to NI on 8/12/2010.
When I compile my LV 8.6 app in LV2010 I get this error:
"LabVIEW 10.0 Development System has encountered a problem and needs to close. We are sorry for the inconvenience."
I was told to do a "Mass Compile" of my LV 8.6 app in LV2010...this failed too.
I was then told to go to each and every vi and "Mass Compile" individually...after about the 50th vi this got old quickly...and it still didn't compile. I then sent NI tech support "my code". The good news is my LV 8.6 app didn't compile with LV2010 @ NI.
My LV 8.6 app compiles and runs great in LV 8.6. I don't want to be left behind with the newer upgrades and I want to move to LV2010. I have lots of LV8.6 code to maintain and I really don't have the time to debug all of my apps.
I was told this will be looked @ in LV2010 SP1.
One note...back up your LV8.6 data before you move to LV2010. Once your LV8.6 code is compiled in LV2010 you will not be able to go back to LV8.6.
I restored all of my LV8.6 code and I'm back working with LV8.6.
It's a tough call, do I stay in LV8.6 and get left behind?
Do I bite the bullet and try to debug this mess in LV2010?
I was told the compiler is completely different in LV2010. That's great, but one reason I have NI Maintenance Agreement is to keep updated with the latest software. I can't afford to re-compile LV code every few years. Like most people, maintaining my Apps with customer's revisions, and modifications is enough work. I don't want more work!
I was told LV2010 SP1 would likely appear in May or June of 2011. I'd hate to break out my old Turbo Pascal apps again...but hey...they still work! My NI maintenance agreement is due this month too, I guess I'll pay NI one more year, and see if they come up with a solution. But if NI doesn't fix this LV8.6 compile in LV2010 problem...I don't see any value staying current with LV software.
I found another Bug with LV2010...you are going to love this one!
There is a new "LV Update Service". Perfect! I like updating my LV software when new patches are available. When I click "update" the update spins over and over "Checking for New Version". I have let it run ALL day with no results...just sits and spins over and over.
OK, I know give NI a break! Yes, LV2010 has a new compiler...and Yes, I will renew my NI maintenance agreement. I just want NI to know failing to compile just one LV8.6 app in LV2010 is not a good idea for customer relations.
Thanks,
Doug

For your update service problem
Unable to Update Current Version of NI Update Service
Why am I Unable to Update My Version of NI Update Service in Windows Vista or Windows 7?

Is there a way to activate the whole application in Non Development system?

Hi All,
Is there a way to activate the whole application in Non Development system? Using some BRF Plus Tool.
We copied a sample application and customized the same as per our requirement. The same is then released to Test System for testing. On Test system this application with all component is in non-active state. We re activated the application with all the component and released it to Test System. But still the application is inactive.
Application is a of storage type system and so cannot use changeability exit to activate on test system.
TR log shows imported with error. Below is the extract of the error:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
BRF+: Runtime client: 000 / target client: 400
BRF+: Object activation of new version started for 418 object IDs
BRF+: <<< *** BEGIN: Content from Application Component CA *** >>>
BRF+: <<< BEGIN: Messages for IDs (53465BA36D8651B0E1008000AC11420B/ ) Table 'Dunning Proposal Line Items (Table)' >>>
No active version found for 23.04.2014 08:14:10 with timestamp
No active version found for IT_FKKMAVS with timestamp 23.04.2014 08:14:10
No active version found for IT_FKKMAVS with timestamp 23.04.2014 08:14:11
BRF+: <<< END : Messages for IDs (53465BA36D8651B0E1008000AC11420B/ ) Table 'Dunning Proposal Line Items (Table)' >>>
BRF+: <<< *** END : Content from Application Component CA *** >>>
BRF+: Object activation failed (step: Activate )
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
BRF+: Import queue update with RC 12
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Errors occurred during post-handling FDT_AFTER_IMPORT for FDT0001 T
FDT_AFTER_IMPORT belongs to package SFDT_TRANSPORT
The errors affect the following components:
 BC-SRV-BR (BRFplus - ABAP-Based Business Rules)
Post-import method FDT_AFTER_IMPORT completed for FDT0001 T, date and time: 20140423011412
Post-import methods of change/transport request DE1K901989 completed
 Start of subsequent processing ... 20140423011359
 End of subsequent processing... 20140423011412
Any help would be appreciated.

Is IT_FKKMAVS part of the same transport request or was it sent already earlier?
You may have a look at the request if it was OK. Probably not.
Maybe in the meantime more requests reached the system that now have in combination solved the problem. What is your release and support package level?
Higher versions of BRFplus have a lot of automatic correction mechanisms built into it.
E.g. problematic imports are collected in an import queue. As soon as a request comes in that fixes any problems the after import processing for faulty imports is automatically redone.

How to create a standalone executable in LabVIEW 2009 Professional Development System?

How to create a standalone executable in LabVIEW 2009 Professional Development System?
Solved!
Go to Solution.

This should help you out http://zone.ni.com/devzone/cda/tut/p/id/3303
Also remember that quick search with Google in many cases will be quicker than asking in this forum. I always use Google before I ask for help in any forum. It is much quicker
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Data not loading in Development system( Urgent)

Dear SDNs,
Am loading data in development system... The message in status tab is Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
I tried to reload the data but am getting the same kind of error message...
I checked out whether the source system connection is OK or not... While am checking the source system connection I got an error message like as follows
BW unknown in source system
The BW IDoc type ZSIA035 is not the same as the source system IDoc type
The following errors occurred in the source system:
EDI: Partner profile not available
Entry in inbound table not found
Entry in outbound table not found
Entry in outbound table not found
Wat kind of action does we follow in this situation...
Kindly Advice me...
Answering getz appreciated...
Warm Regards,
Aluri

Hi Aluri,
I do faced the same problem before....
Is RFC connections and Partner Profiles are done properly between BW system and R/3 systems.........
If it has done properly....... Try to Activate the R/3 source system at BW side...
Still if you are getting the same error..
Right click on R/3 Source system at BW -> select Resore....
It will ask you RFCUSER passward for BW adn R/3
After doing it also still if you get the errors ...
Try to configure the all these steps....
Step 1: Create a Logical System at BW and R/3 side using t-code SALE
Step 2: Create the RFC Connection between BW to R/3 and R/3 to BW using the SM59 and Do the Test Connection and Remote login
Step 3: Create the Port Number for IDOC processing at R/3 and BW sides using WE21
Step4 : Create the Partner Profiles at R/3 and BW sides using the WE20
Specify the Inbound and Outbound parameters at R/3 and BW
For to know message types follow the link.....
http://wiki.ittoolbox.com/index.php/HOWTO:Re-Connect_R/3_and_BW
Check this Link also...
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/content.htm
After doing all these things now come to BW
Create R/3 Source System at AWB....
Hope it Helps...
Regards,
Kiran Telkar
* Assign points if it helps your requirement * *

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

What is the difference between developement system and delivery system?

Hello Experts,
I have some questions regarding publishing the content on delivery system.
Could some one help me.
1) Can we use Development System as Delivery System?
2) Can we Publish a Site into Development System?
3) How to check whether the installation done in development mode or in delivery mode? I mean do we have any procedure to check ?
4) What are the Advantages of Delivery System over the Development System?
Note: I installed Webcenter sites11gR1 on Weblogic10.3 server and windows 7.
Thanks in advance
Rajendar.

Rajendar Raj wrote:
I got the answers.
1) Can we use Development System as Delivery System?
Ans:
Yes, a development system contains the same functionality as a delivery system. Conversely a delivery system doesn't have a contributor interface so it cannot be used for managing assets.
Not recommended and it also depends on the sizing of your environment and tuning. Delivery systems usually are architected with performance in mind, depending on the expected load, logs are minimal and usually Remote Satellite Servers are added. Important as well is that no content or any assets is created directly on the delivery system, you might run into unique ID constrains when you publish content from Authoring to Delivery, in your case Development.
2) Can we Publish a Site into Development System?
Ans:
Yes, you can.
Be careful this is not recommended, you can run into unique id constraints issues
3) How to check whether the installation done in development mode or in delivery mode? I mean do we have any procedure to check ?
Ans:
Look in the ominstallinfo directory, in the location where WebCenter Sites was installed. there is a file called omii.ini that contains installation-time choices and parameters. Look for the parameter "Development"
- true, indicates it was a Development type install. Advanced UI will be available, as will the Contributor UI
- false, indicates it was a Delivery type install. Only Advanced UI will be available.
4) What are the Advantages of Delivery System over the Development System?
Ans:
A delivery type install is more secure, as the contributor UI and some other editorial components are not installed. It also prevents editors from changing content on the delivery system by mistake.
In general Delivery systems are architected different, more emphasis on performance, caching and security.
Thanks and Regards
Rajendar.Regards,
Rodney

How to print Barcode in development system as well as in Sandbox?

Hi All,
We want to print barcodes in development system.
However, barcodes EAN13 and EAN 8 are displayed in Sandbox but not development system.
Are there any specific settings to be maintained?
Thanks,
AP

Hello, you didnt provide enough information to catch on. To ease printing of barcodes I can recommend moving to Adobe forms.

Re: LOCOCKPIT DATASOURCES IN DEVELOPEMENT SYSTEM

Similar Messages

Maybe you are looking for