RE: Logic 9..needing to reboot computer...

to switch midi instruments every time//sorta kills work flow..also manual access from the program has disappeared…i7..3.4 ghz..16 gig ram..2tb drives OSX Lion 10.7.5...any ideas ?

Perhaps you work AOS
Indeed I do but in this case there is a forum bug that sometimes prevents users seeing new posts and in this case, that is what happened.. and so I didn't see your last post until you posted again.
Your problem is probably caused by the Tascam you are using.. There are many reports of the same issue around the net..... even with the latest drivers...
Here are a couple of threads I found googling Tascam 1641 and Lion and there are quite a few more...
http://atomiciguana.com/2011/07/27/Mac_OS_X_Lion_and_the_Tascam_US1641.html
http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=83333
The problem appears to be related to when the Mac goes to sleep.... so you could try and prevent your Mac from sleeping and see if that helps..
The solution of booting up in 32bit mode is not one I would recommend...
The newer ML drivers do not seem to help this..
Other than that.. I cannot help you further unfortunately... as it comes down to the Tascam you have and at the moment there is no real fix for it from Tascam...

Similar Messages

I moved system preferences to trash and probably need to reboot computer help! I also cant open iphoto

I moved system preferences to trash and probably need to reboot computer help! I also cant open iphoto

Move it back. It is essential for the operation of thngs.

Why need to reboot computer 2x before can launch Thunderbird?

when 1st start computer, thunderbird says not responding.
also cannot launch internet explorer too.
reboot again both can launch..
using window vista.
no problem when 1st installed .
can use for a few months.

*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

I downloaded Firefox 4 Beta and everytime I tried to open up the browser, I get a message stating I need to reboot the computer in order to complete the upgrade; I've rebooted the computer at least 4 times.

I downloaded Firefox 4 Beta and everytime I tried to open up the browser, I get a message stating I need to reboot the computer in order to complete the upgrade; I've rebooted the computer at least 4 times. I even tried to download a previous version of Firefox and I am still getting the same message that I need to reboot the computer in order to complete the previous upgrade.

I have a very similar problem myself. Error 42408. And my phone isnt being recognized. I have restored my phone with no luck. I completely uninstalled itunes and reinstalled and it worked then when I ejected unplugged and plugged it back in it had the same problem over again.. I have no idea what to do?

Security filter against AD groups. When you add a computer, does it need to reboot to fall into scope.

This should be an easy one. I have a 2008r2 domain. When I add a computer to an AD security group, so it will get targeted from a GPO that has that same group in its security filter, does the computer need to reboot to start processing any part
of that policy? It has always seemed that computers need a reboot to pick up their group memberships, but I wanted to double-check.
Dave

Hi Dave,
Normally for a computer account to become aware of the group membership change a reboot is required.
Also some group policy can be applied after a comouter reboot. So I'd suggest to reboot your compputer.
Best Regards,
Elaine
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

"you need to reboot your computer"

"you need to reboot your computer" comes up often!
How to fix please?

If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - About
Safe Mode
Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor. Please use copy and paste as screen shots can be hard to read.
Etrecheck – System Information

After installing Mountain Lion. Time on my computer freezes and I need to reboot to correct it. Is there a fix for this

To correct this issue I need to reboot. Has anyone else experienced this issue and is there a fix?

BOTH...when I try to hover over the time, the color wheel of death appears. AND when I go into system prefs, the clock tab selections have been deselected. When I try to select "show date and time in menu bar" again, it stalls for a bit, and then reverts to its deselected state. I've tried rkaufmann87's fix, and it works for just a bit, then back to whacky. Any ideas?

My Macbook pro has the message on a black screen need the reboot disc then press any key to continue. Any Ideas, because I have no discs.

My Macbook pro has the message on a black screen need the reboot disc then press any key to continue. Any Ideas, because I have no discs.I am running Lion OS

Was this a dark gray screen that appeared with the message to restart the computer in five different languages? If so that's a kernel panic. It would help if you can post the panic log: Mac OS X- How to log a kernel panic. Also visit The XLab FAQs and read the FAQ on diagnosing kernel panics.

HP Envy m6, Updated for Windows 8.1, hard drive needs to reboot

Hey,
I've just updated my software to get the new Windows 8.1. On completing my updates, I recieved a message saying my hard drive has changed and that I need to reboot it. How do I do this? Do I risk losing my files? HELP
HpEnvym6beats

Hello hpenvym6beats. Thank you for posting on the HP Forums. I understand the computer provided a message, indicating the hard drive has changed. It shouldn't become a huge issue, as it does occur sometimes, after completing updates. Just turn off the computer and turn it back on. Your files should not be lost, after completing this task.
Please respond if you have any other questions or concerns.
Mario
I worked on behalf of HP.

I need to reboot my HP Elitebook 6930p hard drive but no F11

I need to reboot the hard drive on my HP Elitebook 6930p. I'm using Windows 7. I hit escape upon turning the computer on and then F9 and chose the hard drive reboot option but then after hitting escape again there is no F11 option to take me to System Recovery. The F11 key does nothing and it's not even listed as an option. Does this mean I need to get discs to reboot and if so, does anyone know where I can buy them low price? If not, is there a step here in the reboot process that I'm missing? Any help would be appreciated. Thank you. Paul

Hi:
Yes you can get any version of W7 that the product key on your notebook is good for at the link below.
Use the applicable SP1 Media Refresh ISO file as they are the latest ones.
http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-Multiple-Languag...
After you download the ISO file make sure you got the whole advertised file size.
Then use this tool to transfer the ISO file to a 4 GB USB flash drive or DVD.
The tool will also make the media bootable.
http://www.microsoftstore.com/store/msusa/html/pbPage.Help_Win7_usbdvd_dwnTool

HELP Lightroom 5.6 Spontaneously Reboots Computer

Lightroom 5.6 is installed on a new computer running Windows 8.1 and all drivers and software are up to date. All other software is running fine including InDesign which has been used heavily for 5-6 hours without problems. I imported my existing photos into a new catalog in a freshly installed Lightroom 5.6. After Import, with minimal previews generated on all 11,400 images, I tried generating 1:1 previews on a small group of images and the computer spontaneously (no pause, no blue screen) just rebooted without any warning. After the reboot I tried to start Lightroom again, received a message saying; “error in previews and Lightroom needs to close”. Kept receiving this same message each time when starting Lightroom again and was unable to open Lightroom. Uninstalled Lightroom and ran CCleaner to clear registry entries, cleared all Lightroom preferences and rebooted computer and then re-installed Lightroom. Thinking that there may be some sort of error in the existing catalog I decided to start a new catalog and re-imported all images again.
(I have subsequently concluded that the error is in the Preview files. Apparently when Lightroom closes in a spontaneous reboot the preview files are corrupted hence the message I received. When the reboots happen during 1:1 preview creation I can successfully restart Lightroom if I first delete the Preview folder.)
After importing all images into the re-installed Lightroom tried creating 1:1 previews and experienced the same spontaneous reboot of the computer. Thinking that there might have been some kind of error in the downloaded software, I downloaded a new copy of Lightroom 5.6 and re-installed the software (have done this twice now). Again Lightroom spontaneously rebooted the computer when attempting to create 1:1 previews. Uninstalled and reinstalled Lightroom in the manner previously described above. After re-importing all images I decided NOT to create previews this time. But as I was selecting an image in Library to show large, Lightroom spontaneously rebooted again; however this time I was able to restart Lightroom without receiving an error message. After restarting Lightroom as I tried to select a new image in Library the computer once again spontaneously rebooted.
At this point I have uninstalled and re-installed Lightroom 5.6 eight times. Each time I have carefully searched the computer to make sure that all vestiges of the previous installation have been deleted by using CCleaner, deleting ALL Lightroom folders and searching the registry to make sure that there was nothing left of the prior Lightroom installation. I also deleted the catalog and all presets. So at this point I am at a loss as to what my next step should be.
Any suggestions? Thank you.
Background: I started using Lightroom when Adobe purchased RAWshooter and upgraded all their uses to Lightroom version 1. So I have used every version through Lightroom 5.6. I have Lightroom installed on three other computers and they all run without an issue. This is the first time in all the years I have been using light that I have encountered any problem.

Thanks for the responses.
I have already installed HWMonitor when dj_page suggested it may be due to overheating yesterday.
Tried to insert a print sceeen but file was too big.
The CPU package is running at 62°C
the 4 cores vary from 61,62,64,54
I don't know if this is hot or normal.
Once I get into Lightroom I have no way of telling what the temps are as the second I generate a 1:1 preview the computer reboots.
All three case fans and CPU fan are running.
Don't know what else I can check.
The case is a mid-tower Antec with lots of space and well designed ventilation.
Currently I'm using the Intel graphics display built into the motherboard. Have a new graphics card coming because I suspect that the added load of the video onto the CPU may be causing the issue. What do you all think?

Constant need to reboot powerbook

After applying the updates (battery, bluetooth and 10.4.4) which became available this week, I have needed to reboot the powerbook at least three times every day.
Here is a rundown:
Battery=> no need to run update
Bluetooth=> update did not work. Never finished.
10.4.4=> updated fine.
It would appear that I need to reboot more frequently when I close the lid and open it later. Though I have also seen it work fine for about 10 minutes after the lid was opened and then I get the message that I need to reboot.
Anyone else having this problem? The computer ran GREAT before I did the updates.
Also, anyone know how I can fix it? I don't even know where to begin to trouble shoot it.
Thanks,
jason

yes, it does look like Kernal Panic!
I don't know if this helps anyone, but here is the panic.log file entries: Note. Previous to these entries the last entry was Sept 5th.
=====
Tue Jan 10 12:10:16 2006
panic(cpu 0 caller 0x000A8D00): Uncorrectable machine check: pc =
00000000006CF52C, msr = 0000000000149030, dsisr = 40000000, dar =
00000000365F6040
AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
L2FIR = 0000000000000000, BusFir = 00000000ff000000
Latest stack backtrace for cpu 0:
Backtrace:
0x00095698 0x00095BB0 0x0002683C 0x000A8D00 0x000A7F90 0x000ABC80
Proceeding back via exception chain:
Exception state (sv=0x42743280)
PC=0x006CF52C; MSR=0x00149030; DAR=0x365F6040; DSISR=0x40000000;
LR=0x006E4060; R1=0x2C423D30; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x00032914 0x006E4060 0x002CF960 0x002CE828 0x000A9814
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.AppleAirPort2(404.2)@0x6a5000
dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x60a000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x458000
Exception state (sv=0x45D97C80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000;
LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT 2005;
root:xnu-792.6.22.obj~2/RELEASE_PPC
Wed Jan 11 09:25:47 2006
panic(cpu 0 caller 0x000A8D80): Uncorrectable machine check: pc =
00000000006D152C, msr = 0000000000149030, dsisr = 42000000, dar =
00000000420CF20C
AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
L2FIR = 0000000000000000, BusFir = 0000000000000000
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8D80 0x000A8010 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x506A2A00)
PC=0x006D152C; MSR=0x00149030; DAR=0x420CF20C; DSISR=0x42000000;
LR=0x006E6060; R1=0x2C44BD30; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x039AE630 0x006E6060 0x002D0060 0x002CEF28 0x000A9894
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.AppleAirPort2(404.2)@0x6a7000
dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x60b000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x458000
Exception state (sv=0x422CB780)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000;
LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006;
root:xnu-792.6.56.obj~1/RELEASE_PPC
Wed Jan 11 09:30:06 2006
panic(cpu 0 caller 0x000A8D80): Uncorrectable machine check: pc =
00000000006D152C, msr = 0000000000149030, dsisr = 42000000, dar =
00000000000F5000
AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
L2FIR = 0000000000000000, BusFir = 0000000000000000
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8D80 0x000A8010 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x4F90F280)
PC=0x006D152C; MSR=0x00149030; DAR=0x000F5000; DSISR=0x42000000;
LR=0x006E6060; R1=0x2C4C3D30; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x0027B5E8 0x006E6060 0x002D0060 0x002CEF28 0x000A9894
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.AppleAirPort2(404.2)@0x6a7000
dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x60b000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x458000
Exception state (sv=0x3C5DF280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000;
LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006;
root:xnu-792.6.56.obj~1/RELEASE_PPC
Wed Jan 11 13:30:06 2006
panic(cpu 0 caller 0x000A8D80): Uncorrectable machine check: pc =
00000000006C588C, msr = 0000000000149030, dsisr = 42000000, dar =
00000000E11EE000
AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
L2FIR = 0000000000000000, BusFir = 00000000ff000000
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8D80 0x000A8010 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x42736780)
PC=0x006C588C; MSR=0x00149030; DAR=0xE11EE000; DSISR=0x42000000;
LR=0x006C5C90; R1=0x2C46BD20; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x02B63C7C 0x006C5C90 0x006EACF0 0x0003C744 0x000A9894
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.AppleAirPort2(404.2)@0x6a7000
dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x60b000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x458000
Exception state (sv=0x46B29780)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000;
LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006;
root:xnu-792.6.56.obj~1/RELEASE_PPC
Wed Jan 11 13:37:34 2006
panic(cpu 0 caller 0x000A8D80): Uncorrectable machine check: pc =
00000000006D1548, msr = 0000000000149030, dsisr = 42000000, dar =
00000000F017FF90
AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
L2FIR = 0000000000000000, BusFir = 0000000000000000
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8D80 0x000A8010 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x4249D000)
PC=0x006D1548; MSR=0x00149030; DAR=0xF017FF90; DSISR=0x42000000;
LR=0x006E6060; R1=0x2C553D30; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x02CABC60 0x006E6060 0x002D0060 0x002CEF28 0x000A9894
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.AppleAirPort2(404.2)@0x6a7000
dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x60b000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x458000
Exception state (sv=0x3C5D7A00)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000;
LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006;
root:xnu-792.6.56.obj~1/RELEASE_PPC
Thu Jan 12 08:27:03 2006
panic(cpu 0 caller 0x000A8D80): Uncorrectable machine check: pc =
00000000006D152C, msr = 0000000000149030, dsisr = 42000000, dar =
0000000000FF2000
AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
L2FIR = 0000000000000000, BusFir = 00000000fff00000
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8D80 0x000A8010 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x42452280)
PC=0x006D152C; MSR=0x00149030; DAR=0x00FF2000; DSISR=0x42000000;
LR=0x006E6060; R1=0x2C603D30; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x03E38948 0x006E6060 0x002D0060 0x002CEF28 0x000A9894
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.AppleAirPort2(404.2)@0x6a7000
dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x60b000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x458000
Exception state (sv=0x422C8500)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000;
LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006;
root:xnu-792.6.56.obj~1/RELEASE_PPC

Painfully slow or need to reboot

Ever since I installed Yosemite on my MacBook Pro, my computer is either constantly so slow or needs to be rebooted. I NEVER needed to find out before how to do a Ctrl-Alt-Del for a Mac until I loaded Yosemite. Any suggestions on how to make my computer run the way it use to?

Problem description:
MacBook Pro is extremely slow or freezes to the point of needing to reboot
EtreCheck version: 2.0.6 (91)
Report generated October 21, 2014 at 9:59:11 PM EDT
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 5 days 0:59:29
Disk Information: ℹ️
TOSHIBA MK3265GSXF disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 318.84 GB (119.89 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.philips.iokit.DLconnect (85) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.BezelUI.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.coreservices.uiagent.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.gamed.plist
[failed] com.apple.iconservices.iconservicesagent.plist
[failed] com.apple.pbs.plist
[failed] com.apple.pluginkit.pkd.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.recentsd.plist
[failed] com.apple.sbd.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.secd.plist
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.warmd_agent.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist
[failed] com.apple.awdd.plist
[failed] com.apple.cache_delete.plist
[failed] com.apple.corestorage.corestoragehelperd.plist
[failed] com.apple.coresymbolicationd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.diagnosticd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.iconservices.iconservicesagent.plist
[failed] com.apple.iconservices.iconservicesd.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.Kerberos.digest-service.plist
[failed] com.apple.MobileFileIntegrity.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.periodic-weekly.plist
[failed] com.apple.sandboxd.plist
[failed] com.apple.softwareupdate_download_service.plist
[failed] com.apple.spindump.plist
[failed] com.apple.sysmond.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
Launch Agents: ℹ️
[running] com.newwellnesssolutions.DLconnectMonitor.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
User Launch Agents: ℹ️
[failed] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
Microsoft Messenger Application (/Applications/Microsoft Office 2008/Microsoft Messenger.app)
Dropbox Application (/Applications/Dropbox.app)
TimehopSync Application (/Applications/TimehopSync.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
LogMeIn: Version: 1.0.730 Support
CouponPrinter-FireFox_v2: Version: Version 1.1.7 - SDK 10.5 Support
QuickTime Plugin: Version: 7.7.3
LogMeInSafari32: Version: 1.0.730 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
LogMeInSafari64: Version: 1.0.730 Support
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Safari Extensions: ℹ️
Pin It Button
Keeper - Password and Data Vault
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      7% WindowServer
      6% coreaudiod
      3% com.apple.iCloudHelper
      3% syncdefaultsd
      3% launchd
Top Processes by Memory: ℹ️
60 MB Mail
43 MB com.apple.WebKit.Plugin.64
39 MB WindowServer
39 MB Safari
30 MB mds
Virtual Memory Information: ℹ️
25 MB Free RAM
995 MB Active RAM
983 MB Inactive RAM
1.19 GB Wired RAM
70.76 GB Page-ins
2.47 GB Page-outs

Need to reboot WRT54G2 every morning

Need to reboot WRT54G2 every morning but only for my wireless printer. Everything else works great. Print job sits in spooler until router is reset then it will go through

I think it must be the issue with the printer settings on the computer.
Go to Printer properties. Click on Advanced tab. You will find the option print directly to the printer. Select that option and see if that works.

TaskSequence Do I really need 16 reboots ?

Hi all,
We want to install 40 applications with a Task Sequence using SCCM2012 R2. We migrated 40 Packages to the “Application Model”. When we run the TS on Win7 and the application exitcode was 3010 we got a nice restart and the TS moved on to install the next
application. With 40 apps we get approximately 16 reboots based on a 3010 exitcode.
16 reboots is too much!
So we build a wrapper and all the exitcode now are 0 within a TS so no restarts.
But after the installation of APP-V 4.6 / .Net 4.5 / Powershell 3.0 / we want a reboot.
When I select “Restart Computer – The currently installed default operating system” we get an error after the reboot:
“Task sequence failed due to an external shutdown request received during the TS running” …
Environment:
SCCM2012 R2 Server:
Server 2008 R2 +
SCCM 2012 R2 version 5.00.7958.1000 Build 7958
Clients
Windows 7 SP1 Enterprise + SCCM
Client version 5.00.7958.1000
LOGS
Smsts.log
Error getting system isolation info. Code 8027000C
Remediation failed. Code 8027000C
Task sequence failed due to an external shutdown request received during the TS running
Task Sequence Manager could not initialize Task Sequence Engine. code 80004005
Task sequence failed due to an external shutdown request received during the TS running
Task sequence execution failed with error code 80004005
Execmgr.log
System task 'SMSSHA_Startup' returned error code 0x87d0027f
TSAgent.log
nothing unusual
RebootCoordinator.log
Retry resuming bit-locker TPM PIN protector. Retry count 1
RebootCoordinator 18-12-2013 6:36:46
4032 (0x0FC0)
Didn't suspended bit-locker. Do nothing and return.
RebootCoordinator 18-12-2013 6:36:46
4032 (0x0FC0)
User S-1-5-21-3723389022-3858856549-556620252-238740 is getting pending reboot
  information...
RebootCoordinator 18-12-2013 6:37:12
3316 (0x0CF4)
Back to Basic > starting TS with 2 simple actions:
“Restart Computer – The currently installed default operating system”
RunCommandLine “CMD.exe /c
MD C:\BackFromR”
This is working fine!
Smsts.log Still some errors
Failed to submit event to the Status Agent. Attempting to create pending event.
Error getting system isolation info. Code 8027000C
Remediation failed. Code 8027000C
Remediation failed with error code 8027000C
How is it that a reboot initiated from the TS fails the TS?
Could it be that there are to many “PendingFileRenameOperations”?
Are there any actions that I need to do before or after the reboot action in the TS?
Do I really need 16 reboots….

Removing that reboot step doesn't prove that it is not application doing instant reboot.
When you remove TS initiated reboot you prevent application doing it's post installation processing which could be causing that additional reboot you see in TS log.
The only way to tell would be analyzing event logs from operating system or trying to do each step of the task sequence manually (right after you install SCCM client) and watch what happens. I personally caught this in system logs first and then I was able
to confirm this behavior manually.
Similar behavior is observed when you install roles in task sequence using MDT step. When role that is selected for installation requires another role as pre-requisite, it installs it automatically and if that extra role requires reboot, it will do it and
break your task sequence. Workaround for this is to find exactly what is needed, install it first as pre-requisite, reboot, then install the actual role you need. This is just an example of similar behavior which is logged the same way in TS log.

RE: Logic 9..needing to reboot computer...

Similar Messages

Maybe you are looking for