Re: Low data cap for highest tier internet makes no sense
AWESOME NEWS EVERYONE! Comcast has decided to Give me an unlimited service. YAY! I can know Call China, Hong Kong, India, Mexico, Singapore, South Korea via my comcast landline. Plus any calls to these countries no longer count against my carefree minutes. Brilliant!. Awesome work William F. Sweeney. Why do land lines even still exsist? Havnt used a land line in Years! Even though I have no reason to call out side of the united States and my data cap is still there and I still pay 250.00+ monthly bill and my service is still horrible and I still get disconnected and I still dont always get the speeds Im promised. But what a way to try and make me feel like I get somethign valuable. Wait. I never used my land line. Its just there for the heart monitor device in case someone has a heart attack. Although if that was to happen. Comcast service soo horrible the Hostibital may never get that call. Unless maybe its calling Hong Kong. Maybe there doctors will help. Oh. and awesome news on Comcast EVEN faster service, another way to trick you into signing your soul away. Well. Its time to go pay my 250.00 bill or comcast will disconnect me with EVEN more fees.
Only Telstra is able to block Internet the way you decribe.
Anyway, let us check everthing is configured correctly in your Nokia Asha 300, a Nokia Series 40 phone:
Menu » Settings » Configuration » Default » Options » Delete
Do that for all configuration you see there.
When all are deleted, hit the red key.
Menu » Settings » Configuration » Personal » Add or Options » Add new » Multimedia messages »
Server address: mmsc.telstra.com:8002
Use preferred access point: No
Access point settings » Proxy » Enabled
Proxy Address: 10.1.1.180
Proxy Port: 80
Bearer settings » Packet data access point: telstra.mms
When you are done, hit the red key.
Menu » Settings » Configuration » Default » Personal configuration » Select
Now, try to send an MMS. Do you get a frame around the G? Yes, than Internet is enabled for your account. A frame says: The APN context to telstra.mms was activated successfully. If not, ask Telstra if GPMMSB3 is enabled for you. The next step is to use the correct APN of your pack. Because I am not a Teltra user, I cannt help any further. I would go for an Australian crowd based support channel, like the official one …
Similar Messages
-
When I take a look in the deployment guides I could see that I should not use data rates in the 802.11a network below 12mbit. We do not expect more than 6 calls and 8 phones on one access point but would like to raise the coverage by using 6mbit data rate. We could not place more access points. Is there someone with experience using lower data rates?
Using:1252 Access Points and WISM ControllerAllowing speeds from 6 Mbps can technically work, but the recommendation is also to avoid retries... the larger your cell, the more chances you have to have multipath issues making packets fail. With a voice deployment, if you have more than 1 % error rate, your MOS degrades below 4.1 (the quality of the call is affected and users start complaining that voice conversation is unstable, choppy etc).
So allowing 6 Mbps is fine, but the result will depend on the quality of your RF environment...
hope it helps
Jerome -
Where can i directly contact them or send them a copy of the billing process?
Manage your membership and payments | Creative Cloud
https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting -creative-cloud.html
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN ) -
HomeFusion 4G/LTE data caps way too low!!! Please raise them!!
I've had HomeFusion 4G/LTE since January 5th and I absolutely love the speed and low latency over satellite. There's just one big problem that I'm really disturbed about and that's the extremely low data cap it has. I'm paying $135 a month for the 30GB package and I've already hit 25GB in just over 2 weeks. I've watched no movies other than what videos I watch on YouTube. I've downloaded no movies or software in ISO format. I have played WOW a few hours over the past couple of weeks but that uses very little data.
This HomeFusion is being used by a family household and I can tell you that unless I just tell everyone to just not use the internet, there's no way 30GB is going to be enough data. Supposedly for the first 2 months I'm on some kind of promotional period that actually gives me 45GB, but then it's suppose to drop down to the 30GB thereafter.
If VZW doesn't raise the caps to real world usage expectations, then I'm going to be spending $300 a month on this connection just to get the extra 15GB that's being offered during the promotional period. That's $10 per 1GB over your limit, which 15GB is $150, then added to the $135 already which will be $285 plus taxes.. That's outrageous for a fixed 4G/LTE connection to my house.
I'm out in the sticks and probably 1 of only a few that are using the tower for the 4G/LTE it offers. I seriously doubt I'm causing any congestion with how I use my connection.
Hopefully there are other HomeFusion customers that see the need for VZW to amp up the data caps to something more realistic at around 100GB.
Recently an article came out showing that the ISPs were using data caps to solely monetize data usage and it had nothing to do with congestion.
http://www.techspot.com/news/51392-former-fcc-chair-isp-data-caps-are-about-monetization-not-network-congestion.html
Isn't $135 for a 4G/LTE connection at home already too much?? Come on VZW, please raise the data caps or better yet, eliminate them and just charge for the connection.TexasRebel wrote:
Man..spare me the `there's only so much bandwidth to go around' speech. I live out in a podunk town that is serviced by AT&T, Verizon and Sprint, along with all the other smaller carriers. There's maybe like a dozen people in my area that might even have HomeFusion and that's because they are crazy enough to shell out $60-$120 a month for a better internet experience than satellite.
Just because YOUR area has few people doesn't mean that what Verizon should base pricing on. Verizon has standardize pricing. So they have to price for ALL areas.
I just want more data than the 30GB,, because number 1, HomeFusion is marketed as a home residential service. It's not like there are thousands of smart phones like in a mid-sized city accessing it. It's a broadband product that is marketed for family use. 30GB is a joke to give a family, when whoever it is that runs the HomeFusion department knows that a family can easily eat up 100GB if everyone were to stream movies and play games. 100GB would be more than enough for the HomeFusion subscriber that has to pay $150 just for internet. LTE is delivering 40+Mbps where I'm located.. I would settle for 10Mbps for my needs.
LTE is not a replacement for REAL internet. That's just factual. So if yo want REAL internet you'll have to move where it is. Maybe that's not fair but that's the reality. Maybe in a couple of years you can get more than 30 GB.
If Verizon is so concerned about bandwidth consumption, then use QoS metrics to balance out the bandwidth to everyone connected to a specific tower if congestion is detected.. You act like if someone uses 100GB of data over a wireless connection it's eating up all the available bandwidth a tower might have.. Not really. Suppose that 100GB is being scheduled to download at late night when the network is generally idle??
Ok then everyone will get 500 kbps. How does that sound?
I've had both Exede and Hughesnet Gen4. Fast they are, but they pull the same crap that the wireless carriers are pulling.. Claiming that people who use too much data are congesting their networks.. That's a load of crap. What's congesting the network is having low bandwidth and having too many people eating up that bandwidth to download content.. If you have 50Mbps wireless that download takes a fraction of the time it would take someone with 3-5Mbps. They get what they want fast and the available bandwidth becomes free again for whoever else may need it.
Just like mobile they are bandwidth constrained. You can belive what you want. Not believing the truth doesn't make it not true. 2+2=4 no matter how much you want it to equal 5.
It's basically called control. The carriers want control of what you can do on their networks. It used to be subscribers just paid for the connection fee and they did what they wanted. But ever since carriers thought they could monetize data usage and there's no law for them to not do it, they do whatever they want, squeezing the customer for more and more money...
Even if what you said was 100% true there is nothing you can do about it. Coming here to complain certainly won't do anything. Your choice is to either pay or not to pay.
VZW has 115 million subscribers.. do the math. They make billions each month. They make more than enough money to put back into their network to increase capacity. So does AT&T. If either carrier doesn't want their wireless networks to become too congested, then start upgrading their wireline services to fiber/cable instead of claiming they are dumping wireline services and pushing people to wireless..
Actually they do invest in their networks. They spend billions each year. Verizon has 20 MHz total for LTE right now. 10 for uplink 10 for downlink. That has to be share with Homefusion and mobile data customers both residential and business. Spectrum is a finite resource. It will take time to acquire and deploy it. Try doing some research on how mobile technology works before question the validity of what I'm saying. I did the research you should too. My posts are based on FACTS not wishes or conspiracy theories.. -
I have had Verizon Homefusion for about 2 weeks now. It seems to work well most of the time. I had one outage overnight and called customer service. They created some sort of repair report and it was working again by the time I got up the next morning.
My question is, What does Verizon have planned for the raising or elimination of the data caps? For a primary home service, these data caps are terrible. $60 for 10gig? Really? If anyone does have this service, don't plan on streaming netflix, or having many long Skype conversations. It's funny that the further into the future we go, the more internet we use. Now lots of electronic devices in your house can be connected to the internet, yet data caps are no where near keeping up with actual demand.
I'm not totally against data caps. It's just that the current data caps for this service at the price points they are at are terrible. $60 for 20 gigs seems reasonable to me for the time being. That would at least satisfy the average household. $90 for 30 gigs, and $120 for 60 gigs would be the common sense caps. But Verizon is more interested in profit than customer satisfaction.
Over the next year or so Data Caps should be raised even more for the price points mentioned. Internet access is no longer just a luxury, its a necessary part of today's world. Compare it to telephone service before it was available to everyone. If you can't afford a phone, the government will now give you one.stuartbp wrote:
"There ARE alternatives to HOW you receive it, though. There are lower cost alternatives. If you can't or choose not to pay the prices for Home Fusion with its current data caps, get your internet service in other ways. Libraries, for instance."
Let me know which librairies are open 24/7 and they let me hangout in my underwear while I work on work projects for 6 hours at a time.
Like I have previously said, there is a cost for doing something your way. Nothing has changed.
"About the ONLY thing I don't do with my internet service which you list is to stream content, and I come nowhere close to ANY type of cap. I have no sympathy for someone complaining about data caps when the majority of their usage is for an ENTERTAINMENT choice they make. If I choose to watch my preferred form of entertainment, I will do so. When I feel the price is too high, I will curtail my enjoyment of it. Simple as that. I would love to go to more concerts, plays, movies, etc... but when I feel the price is too steep, I DON'T GO. Therefore I do not have to pay it."
Try video conferencing....enough said. I'm sorry you live in the age of the dinosaur.
You video conference from home? Maybe you should speak to your employer about covering the data cost for the video conferencing if it is important to THEM! I video/teleconference with China and India on an almost weekly basis. More often than not a phone feed is more than enough with just access to the slides in advance. The age of the dinosaur is to not find a more cost effective way to have the meetings if the cost is what is bothering you. I assume you don't attend these video conferences in your underwear!
"Some people complain because they do not live where any other source of broadband is available, that is also a choice. I live where my availability of open space is limited. A choice I have made. Trade offs are made in life all the time. People make a choice, for example, to live in the country/suburbs and then complain they do not have the same conveniences people who live in a more urban area have. Go figure!? You can't have it both ways."
I live where no other source is currently available. I moved 3 miles. No I don't live out in a rural area. I live on a street where the cable companies decided not to run 1/2 mile of cable because it wasn't cost effective for that section. One house to the east of me has cable internet, and about 4 to the west also does. I can see cable lines on the utility poles from my driveway. To have cable hooked to my house it will cost me between $4000-$6000 dollars per the cable company...and you know what? I will be paying to have it done because I have to, to live and work in a modern society. HomeFusion is just bridging the gap until it's done. I will never recommend it to anyone, or Verizon service as a whole.
The point being THAT YOU MOVED! YOUR DECISION. Did you not notice that there was no cable to the house? Did you not research how much it would cost for said service. There is a cost to home ownership. I assume YOU chose to move 3 miles to your current location because you liked the place. It seems you don't like EVERYTHING about it. Good for you to putting the cable in. I was in the same situation when I built a house, since it was 300ft from the road, I would have to pay for the utilities to be brought to the house. This is not unusual. To expect them to do so seems to smell of a sense of entitlement.
So you're saying that people who do live out in rural areas don't deserve broadband internet because they have more open space? People can't have both? Modern technology allows internet to be anywhere and everywhere. It's on the space station, and the nearest starbucks for them is about 20,000 miles away. I'm sorry that you live in a box just so you can have broadband internet that you don't really even need. You've gotten way off topic. I have a problem with the data caps. You ramble about things that don't compare. Did I say that, I don't think I said that. I said if you choose to live in a more rural/suburban area because you like the open space, it is hard to feel sympathy when you complain about having the same conveniences as those who live in a more densely populated area. There are choices you need to make which better suit your needs. It seems you have made yours, YOU MOVED to a spot where you would need to pay $4000-$6000 to have cable/broadband in your house. That is ONE of the choices YOU made. You are correct, there is broadband on the space station. It also costs a lot more than the HOME FUSION rates to have it there. You would rather pay THOSE rates? -
When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD. You must replace this file with one of a lower data rate". We need help to correct this so we can complete burning to DVD.
What did you export from Premiere?
Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help -
Data used for a 25 minute skype call
Hello,
I am using skype 7.0 for windows PC to make 25 minute skype calls for work. I am just on an 800mb limit per day. According to my ISP's Web site, 800 mb is enough to make 4.5 hours of skype calls. But I saw that for just one skype call, my statistics tab showed I consumed about 350+mb already after just one 25 minute skype call. So if this is the case for every skype call I make, I can only make 2-3 25 minute skype calls before my ISP limits my internet usage for the day.
How much data is used for 1 25 minute skype call using PC ?
I think my ISP's Web site is misleading about skype calls.
Solved!
Go to Solution.You can still have your video on and your student can have their video off. If they "call" you instead of "video call" you, their video will never be engaged and you can just turn your video on from that point. The big problem with ISP bandwidth restrictions is that their limitation tends to count upload and download which greatly reduces your overall real bandwidth. You can use this as a guide as well to guesstimate.
http://community.skype.com/t5/Windows-archive/Bandwidth-Consumption-Question-Again/m-p/2887243/highl...
Be aware that this only accounts for one-way communication. If you were to both have your video on at the same quality the figure would double. If your student only has audio engaged then you would only add 25 minutes of "äudio" to gauge an approximation. Since Skype is "automatic" call quality can go up or down. Netlimeter or it's equivalent is the only real way to lower the video quality other than using a much lower resolution camera.
In regards to your ISP's "video conferencing" calculation, it's not pulled out of a hat. It appears to be calculated off a total video conferencing rate of 384k which is generally at a CIF/SIF resolution (~352x288 or lower). Skype's video quality operates at a higher rate that even supersedes their 90-minute movie estimate they provided as well. If you were to compare either a 90-minute DVD quality video or a 90-minute Blu-ray quality video the bandwidth would of course be surpassed as well as downloaded/watched movies vary in quality as well.
I believe the average amount of bandwidth consumption for typical households can be upwards of 150-300+ Gigabytes a month. Low metered accounts are generally for mobile devices or people who don't plan to use the Internet beyond basic web searching and e-mail. I personally would use a plan like that to get Internet in remote places but I wouldn't plan to do anything beyond the basics.
In regards to overage of bandwidth consumption ISPs either:
1. Terminate the data service for the month when exceeded
2. Charge you overage charges at a set cost per MB or GB.
3. Allow you to continue to use the service but cap your Internet speed to twice that of dial-up (115kbp/s) or possibly even lower. -
The DATA CAP MEGA THREAD....post data cap questions or comments here.
In the interest of keeping things orderly....This is the DATA CAP MEGA THREAD....post data cap questions or comments here.
Please keep it civil.
Comcast is testing usage plans (AKA "data caps") in certain markets.
The markets that are currently testing usage plans are:
Nashville, Tennessee market: 300 GB per month and additional gigabytes in increments/blocks ( e.g., $10.00 per 50 GB ).
Tucson, Arizona market: Economy Plus through Performance tiers receive 300 GB. Those customers subscribed to the Blast! Internet tier receive 350 GB; Extreme 50 customers receive 450 GB; Extreme 105 customers receive 600 GB. Additional gigabytes in increments/blocks of 50 GB for $10.00 each in the event the customer exceeds their included data amount.
Huntsville and Mobile, Alabama; Atlanta, Augusta and Savannah, Georgia; Central Kentucky; Maine; Jackson, Mississippi; Knoxville and Memphis, Tennessee and Charleston, South Carolina: 300 GB per month and additional gigabytes in increments/blocks ( e.g., $10.00 per 50 GB ) Economy Plus customers have the option of enrolling in the Flexible-Data plan.
Fresno, California, Economy Plus customers also have the option of enrolling in the Flexible-Data plan.
- If you live outside of these markets you ARE NOT currently subject to a data plan.
- Comcast DOES NOT THROTTLE your speed if you exceed your usage limits.
- You can check out the Data Usage Plan FAQ for more information.
I just got a call today that I reached my 300GB limit for the month. I called and got a pretty rude response from the security and data usage department. The guy told me in so many words that if I do not like or agree with the policy that I should feel free to find another service provider.!!! I tried to explain that we watch Netflix and XFinity on-demand alot and I was told that that can not be anywhere close to the data usage. I checked my router and watching a "super HD, dolby 5.1" TV show on Netflix will average about 5-6 GB per hour (1.6MB/s) ... sp this means that I can only watch no more than 1-2 Super HD TV shows a day via Netflix before I run out of my data usage. This seems a bit redicilous doesn't it? Maybe the TV ads about the higher speed than the competition should be accompanied with "as long as you don't use it too often" Not a good experience ...
-
I have data caps and need to do a clean mavericks install
Hello.
I recently bought a used Mac mini and not realizing the new Mac OS installation options are over the internet, I erased the hard drive and tried to do the system recovery.
Unfortunately I'm on rural broadband, I have a small data cap and my connection is unreliable. Even if I try to just do it anyway and eat the overage charges I only get corrupt downloads that won't work. Tried downloading the installer from the local library's free wifi and made a USB stick but it still insists on re-downloading when I try to install.
Is there any way to do it offline using a copy of the OS downloaded somewhere else? My research says no, Apple if you're listening please please provide that option. This really ***** :(
If I go to an apple store will they charge me a lot to do it? Would they let me plug in a monitor and keyboard/mouse and let me do it myself for free?The_Cowman wrote:
Hello.
I recently bought a used Mac mini and not realizing the new Mac OS installation options are over the internet, I erased the hard drive and tried to do the system recovery.
Unfortunately I'm on rural broadband, I have a small data cap and my connection is unreliable. Even if I try to just do it anyway and eat the overage charges I only get corrupt downloads that won't work. Tried downloading the installer from the local library's free wifi and made a USB stick but it still insists on re-downloading when I try to install.
Is there any way to do it offline using a copy of the OS downloaded somewhere else? My research says no, Apple if you're listening please please provide that option. This really ***** :(
If I go to an apple store will they charge me a lot to do it? Would they let me plug in a monitor and keyboard/mouse and let me do it myself for free?
Most Apple Stores are pretty good. Or a friend with a large download limit. Just make sure that where ever you go to download it that you use your OWN Apple ID. Then copy it to the USB Stick, copy it to your Application folder and reinstall. (Note that the installer removes itself after installation, so keep that copy either on the USB stick or copy to an external drive, etc.)
Pete -
Date problem for a report (urgent)
hi all ,
i am developing a report for asset aquisition of fi module.
in this my client has requirement like this-
1. if i enter date in selection screen ie 31.03 2006 or less than that
then i should get all the records from 01.04.2005 to the date which i have
entered in selction screen ie might be 31.03.2006 or less than that.
2. but if i enter date in selection screen any date more than 31.03.2006
then i should get all the records from 01.04.2006 to the date which i have
entered in selction screen .
ex- if i have entered 22.12.2006 then i should get record from
01.04.2006 to 22.12.2006.
bcoz indian fiscal year starts from 1st april and ends at 31st march.
so plz give the solution.
Thanks & Regards
Sanjeevhi mr reddy,
thanks for the reply.
here i am sending my code just make the modification in it wherever
it is required, bcoz i m also using some date logic for it.
so i request u to modify my code and check it that wethere its working
correctly after applying ur logic.
bcoz right now if i am entering any date suppose 22.12.2006
then i am getting all the record from 01.04.2005 to 22.12.2006.
but it should display only from 01.04.2006 to 22.12.2006.
but ya one more thing i want to make it in ur notice that
if i have entered 31.03.2006 then it should show
records from 01.04.2005 to 31.03.2006.
so both of my above requirement should fulfill out of which one i am alraedy getting.
check my code and do the modification as per ur logic.
REPORT Z_FA_ACQ NO STANDARD PAGE HEADING
LINE-SIZE 400
LINE-COUNT 65(3).
TYPE-POOLS : SLIS.
TABLES : ANLA, "ASSET MASTER RECORD-SEGMENT
ANLZ, "time dependent asset allocations
ANLC,
ANEK.
DATA : BEGIN OF T_ANLA OCCURS 0,
BUKRS LIKE ANLA-BUKRS,
ANLN1 LIKE ANLA-ANLN1,
ANLN2 LIKE ANLA-ANLN2,
AKTIV LIKE ANLA-AKTIV,
TXT50 LIKE ANLA-TXT50,
ZUGDT LIKE ANLA-ZUGDT,
MENGE LIKE ANLA-MENGE,
MEINS LIKE ANLA-MEINS,
ANLKL LIKE ANLA-ANLKL,
END OF T_ANLA.
DATA : BEGIN OF T_ANLZ OCCURS 0,
BUKRS LIKE ANLZ-BUKRS,
ANLN1 LIKE ANLZ-ANLN1,
ANLN2 LIKE ANLZ-ANLN2,
GSBER LIKE ANLZ-GSBER,
KOSTL LIKE ANLZ-KOSTL,
STORT LIKE ANLZ-STORT,
RAUMN LIKE ANLZ-RAUMN,
KFZKZ LIKE ANLZ-KFZKZ,
WERKS LIKE ANLZ-WERKS,
END OF T_ANLZ.
DATA : BEGIN OF T_ANEK OCCURS 0,
BUKRS LIKE ANEK-BUKRS,
ANLN1 LIKE ANEK-ANLN1,
ANLN2 LIKE ANEK-ANLN2,
BELNR LIKE ANEK-BELNR,
BUDAT LIKE ANEK-BUDAT,
XBLNR LIKE ANEK-XBLNR,
SGTXT LIKE ANEK-SGTXT,
GJAHR LIKE ANEK-GJAHR,
END OF T_ANEK.
DATA : BEGIN OF T_ANLC OCCURS 0,
BUKRS LIKE ANLC-BUKRS,
ANLN1 LIKE ANLC-ANLN1,
ANLN2 LIKE ANLC-ANLN2,
ANSWL LIKE ANLC-ANSWL,
NAFAP LIKE ANLC-NAFAP,
AAFAP LIKE ANLC-AAFAP,
AFABE LIKE ANLC-AFABE,
GJAHR LIKE ANLC-GJAHR,
END OF T_ANLC.
DATA : BEGIN OF IT_FINAL OCCURS 0,
ANLN1 LIKE ANLA-ANLN1,
ANLN2 LIKE ANLA-ANLN2,
AKTIV LIKE ANLA-AKTIV,
TXT50 LIKE ANLA-TXT50,
ZUGDT LIKE ANLA-ZUGDT,
MENGE LIKE ANLA-MENGE,
MEINS LIKE ANLA-MEINS,
GSBER LIKE ANLZ-GSBER,
KOSTL LIKE ANLZ-KOSTL,
STORT LIKE ANLZ-STORT,
RAUMN LIKE ANLZ-RAUMN,
KFZKZ LIKE ANLZ-KFZKZ,
BELNR LIKE ANEK-BELNR,
BUDAT LIKE ANEK-BUDAT,
XBLNR LIKE ANEK-XBLNR,
SGTXT LIKE ANEK-SGTXT,
ANSWL LIKE ANLC-ANSWL,
NAFAP LIKE ANLC-NAFAP,
AAFAP LIKE ANLC-AAFAP,
ANLKL LIKE ANLA-ANLKL,
GJAHR LIKE ANEK-GJAHR,
END OF IT_FINAL.
*added for date logic by sanjeev
DATA:V_LOW LIKE SY-DATUM,
V_HIGH LIKE SY-DATUM,
V_YEAR(04) TYPE N.
*end of date logic
DATA : LINE_COLOR(4) TYPE C.
DATA : FIELDCATALOG TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
GD_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: EVENT TYPE SLIS_ALV_EVENT OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN : BEGIN OF BLOCK B_FA WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_BUKRS FOR ANLA-BUKRS DEFAULT 'ML',
S_ANLN1 FOR ANLA-ANLN1,
S_ANLN2 FOR ANLA-ANLN2,
S_ANLKL FOR ANLA-ANLKL,
S_AKTIV FOR ANLA-AKTIV,
S_GSBER FOR ANLZ-GSBER,
S_KOSTL FOR ANLZ-KOSTL,
S_WERKS FOR ANLZ-WERKS,
S_STORT FOR ANLZ-STORT,
S_BUDAT FOR ANEK-BUDAT.
SELECTION-SCREEN : END OF BLOCK B_FA.
SET PF-STATUS '100'.
added for date logic by Sanjeev
IF S_BUDAT-HIGH IS INITIAL.
V_YEAR = S_BUDAT-LOW+0(4).
V_YEAR = V_YEAR - 1.
CONCATENATE V_YEAR '0401' INTO V_LOW.
V_HIGH = S_BUDAT-LOW.
ELSE.
V_LOW = S_BUDAT-LOW.
V_HIGH = S_BUDAT-HIGH.
ENDIF.
end of logic
SELECT BUKRS ANLN1 ANLN2 AKTIV TXT50 ZUGDT MENGE MEINS ANLKL
FROM ANLA
INTO CORRESPONDING FIELDS OF TABLE T_ANLA
WHERE ANLN1 IN S_ANLN1
AND ANLN2 IN S_ANLN2
AND BUKRS IN S_BUKRS
AND ANLKL IN S_ANLKL
AND AKTIV IN S_AKTIV
AND ZUGDT >= V_LOW " added to get the date logic work
AND ZUGDT <= V_HIGH. " added to get the date logic work
CHECK : NOT T_ANLA[] IS INITIAL.
SELECT BUKRS ANLN1 ANLN2 GSBER KOSTL STORT RAUMN KFZKZ
FROM ANLZ
INTO CORRESPONDING FIELDS OF TABLE T_ANLZ
FOR ALL ENTRIES IN T_ANLA
WHERE ANLN1 = T_ANLA-ANLN1
AND ANLN2 = T_ANLA-ANLN2
AND BUKRS = T_ANLA-BUKRS
AND GSBER NOT IN S_GSBER
AND KOSTL IN S_KOSTL
AND WERKS IN S_WERKS.
SELECT BUKRS ANLN1 ANLN2 BELNR BUDAT XBLNR SGTXT GJAHR
FROM ANEK
INTO CORRESPONDING FIELDS OF TABLE T_ANEK
FOR ALL ENTRIES IN T_ANLA
WHERE ANLN1 = T_ANLA-ANLN1
AND ANLN2 = T_ANLA-ANLN2
AND BUKRS = T_ANLA-BUKRS
AND BUDAT >= V_LOW " added to get the date logic work
AND BUDAT <= V_HIGH. " added to get the date logic work
SELECT BUKRS ANLN1 ANLN2 ANSWL NAFAP AAFAP AFABE GJAHR
FROM ANLC
INTO CORRESPONDING FIELDS OF TABLE T_ANLC
FOR ALL ENTRIES IN T_ANLA
WHERE ANLN1 = T_ANLA-ANLN1
AND ANLN2 = T_ANLA-ANLN2
AND BUKRS = T_ANLA-BUKRS
AND AFABE = '01'.
SORT T_ANLC BY BUKRS ANLN1 ANLN2.
SORT T_ANLZ BY BUKRS ANLN1 ANLN2.
LOOP AT T_ANLA.
MOVE : T_ANLA-ANLN1 TO IT_FINAL-ANLN1,
T_ANLA-ANLN2 TO IT_FINAL-ANLN2,
T_ANLA-AKTIV TO IT_FINAL-AKTIV,
T_ANLA-TXT50 TO IT_FINAL-TXT50,
T_ANLA-ZUGDT TO IT_FINAL-ZUGDT,
T_ANLA-MENGE TO IT_FINAL-MENGE,
T_ANLA-MEINS TO IT_FINAL-MEINS.
READ TABLE T_ANLZ WITH KEY BUKRS = T_ANLA-BUKRS
ANLN1 = T_ANLA-ANLN1
ANLN2 = T_ANLA-ANLN2 BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE : T_ANLZ-GSBER TO IT_FINAL-GSBER,
T_ANLZ-KOSTL TO IT_FINAL-KOSTL,
T_ANLZ-STORT TO IT_FINAL-STORT,
T_ANLZ-RAUMN TO IT_FINAL-RAUMN,
T_ANLZ-KFZKZ TO IT_FINAL-KFZKZ.
ENDIF.
READ TABLE T_ANLC WITH KEY BUKRS = T_ANLA-BUKRS
ANLN1 = T_ANLA-ANLN1
ANLN2 = T_ANLA-ANLN2 BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE : T_ANLC-ANSWL TO IT_FINAL-ANSWL,
T_ANLC-NAFAP TO IT_FINAL-NAFAP,
T_ANLC-AAFAP TO IT_FINAL-AAFAP.
ENDIF.
added to get the date logic work
LOOP AT T_ANEK WHERE BUKRS = T_ANLA-BUKRS AND ANLN1 = T_ANLA-ANLN1 AND
ANLN2 = T_ANLA-ANLN2 AND BUDAT >= V_LOW AND BUDAT <= V_HIGH.
MOVE : T_ANEK-BELNR TO IT_FINAL-BELNR,
T_ANEK-BUDAT TO IT_FINAL-BUDAT,
T_ANEK-GJAHR TO IT_FINAL-GJAHR,
T_ANEK-XBLNR TO IT_FINAL-XBLNR,
T_ANEK-SGTXT TO IT_FINAL-SGTXT.
APPEND IT_FINAL.
ENDLOOP.
ENDLOOP.
PERFORM BUILD_FIELDCATALOG.
PERFORM DISPLAY_ALV_REPORT.
PERFORM BUILD_LAYOUT.
FORM BUILD_FIELDCATALOG *
FORM BUILD_FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'ANLN1'.
FIELDCATALOG-SELTEXT_M = 'ASSET MAIN NO'.
FIELDCATALOG-COL_POS = 0.
FIELDCATALOG-OUTPUTLEN = 14.
FIELDCATALOG-EMPHASIZE = 'X'.
FIELDCATALOG-KEY = 'X'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'ANLN2'.
FIELDCATALOG-SELTEXT_M = 'SUB NO'.
FIELDCATALOG-COL_POS = 1.
FIELDCATALOG-OUTPUTLEN = 7.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'AKTIV'.
FIELDCATALOG-SELTEXT_M = 'CAP.DATE'.
FIELDCATALOG-COL_POS = 2.
FIELDCATALOG-OUTPUTLEN = 10.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'TXT50'.
FIELDCATALOG-SELTEXT_M = 'NAME'.
FIELDCATALOG-COL_POS = 3.
FIELDCATALOG-OUTPUTLEN = 50.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'ZUGDT'.
FIELDCATALOG-SELTEXT_M = 'POSTING DATE'.
FIELDCATALOG-COL_POS = 4.
FIELDCATALOG-OUTPUTLEN = 10.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MENGE'.
FIELDCATALOG-SELTEXT_M = 'QTY'.
FIELDCATALOG-COL_POS = 5.
FIELDCATALOG-OUTPUTLEN = 13.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MEINS'.
FIELDCATALOG-SELTEXT_M = 'UNITS'.
FIELDCATALOG-COL_POS = 6.
FIELDCATALOG-OUTPUTLEN = 3.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'GSBER'.
FIELDCATALOG-SELTEXT_M = 'BA'.
FIELDCATALOG-COL_POS = 7.
FIELDCATALOG-OUTPUTLEN = 4.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'KOSTL'.
FIELDCATALOG-SELTEXT_M = 'COST CENTER'.
FIELDCATALOG-COL_POS = 8.
FIELDCATALOG-OUTPUTLEN = 13.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'STORT'.
FIELDCATALOG-SELTEXT_M = 'LOCATION'.
FIELDCATALOG-COL_POS = 9.
FIELDCATALOG-OUTPUTLEN = 10.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'RAUMN'.
FIELDCATALOG-SELTEXT_M = 'ROOM'.
FIELDCATALOG-COL_POS = 10.
FIELDCATALOG-OUTPUTLEN = 10.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'KFZKZ'.
FIELDCATALOG-SELTEXT_M = 'LICENSE PLATE NO'.
FIELDCATALOG-COL_POS = 11.
FIELDCATALOG-OUTPUTLEN = 20.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'BELNR'.
FIELDCATALOG-SELTEXT_M = 'DOC NO'.
FIELDCATALOG-COL_POS = 12.
FIELDCATALOG-OUTPUTLEN = 13.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'BUDAT'.
FIELDCATALOG-SELTEXT_M = 'POSTING DATE'.
FIELDCATALOG-COL_POS = 13.
FIELDCATALOG-OUTPUTLEN = 15.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'XBLNR'.
FIELDCATALOG-SELTEXT_M = 'REF NO'.
FIELDCATALOG-COL_POS = 14.
FIELDCATALOG-OUTPUTLEN = 25.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'SGTXT'.
FIELDCATALOG-SELTEXT_M = 'TEXT'.
FIELDCATALOG-COL_POS = 15.
FIELDCATALOG-OUTPUTLEN = 50.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'ANSWL'.
FIELDCATALOG-SELTEXT_M = 'ACQ VAL'.
FIELDCATALOG-COL_POS = 16.
FIELDCATALOG-OUTPUTLEN = 13.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'NAFAP'.
FIELDCATALOG-SELTEXT_M = 'ORD.DEP'.
FIELDCATALOG-COL_POS = 17.
FIELDCATALOG-OUTPUTLEN = 13.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'AAFAP'.
FIELDCATALOG-SELTEXT_M = 'UNPLAN DEP'.
FIELDCATALOG-COL_POS = 18.
FIELDCATALOG-OUTPUTLEN = 13.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
ENDFORM.
PERFORM ALVDISPLAY.
FORM ALVDISPLAY.
EVENT-FORM = 'USERCOMMAND'(002).
EVENT-NAME = 'USER_COMMAND'(001).
APPEND EVENT.
ENDFORM.
FORM DOWNLOADEXCEL.
DATA : B_FILE1 LIKE RLGRAP-FILENAME.
ENDFORM.
FORM BUILD_LAYOUT *
FORM BUILD_LAYOUT.
GD_LAYOUT-ZEBRA = 'X'.
GD_LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
ENDFORM.
FORM DISPLAY_ALV_REPORT *
FORM DISPLAY_ALV_REPORT.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_CALLBACK_PROGRAM = SY-REPID
i_callback_pf_status_set = 100
i_callback_user_command = sy-ucomm
I_STRUCTURE_NAME =
IS_LAYOUT = GD_LAYOUT
IT_FIELDCAT = FIELDCATALOG[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = ' '
IT_EVENTS =
IT_EVENT_EXIT = EVENT[]
IS_PRINT =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM. -
Looking to get a data plan for the sole purpose of playing online video games
Hi everyone,
I live in the mountains of Pine Valley, CA and the seclusion is becoming intolerable. I'm looking to get a data plan with Verizon to play online video games, namely Diablo 3 or failing that due to latency, then Civilization 5. Can anyone give me pointers on if this would work and what plan I could get? Currently, I have a plan with Boost Mobile which uses Sprint cell phone towers. I tested my internet connection with speedtest.net and received a ping as low as 140 and as high as 1000, but I'm hoping the 1000 is just due to reception issues that can be fixed with a better antenna. The 140 ping is a little high too but I'm hoping this will be better on the Verizon network since I think their cellphone towers are closer. The closest landmark to me is the Golden Acorn Casino at 1800 Golden Acorn Way Campo, CA 91906. If anyone could tell me the distance from Verizon's cell tower to the casino and Sprint's and could estimate a ping value based on that, I would really appreciate it.
I like Verizon's data plan for 10gb but I'm confused on device connectivity. Is this the data plan plus whatever router device I hook it up to? I would also need some sort of antenna and a router, wireless or wired. Can anyone give me pointers on how to find these? An estimation on Ping and bandwith speed and also on peak hours in my area would be nice too. Thanks to anyone that can help me with this! Oh, and while I don't think my area has coverage for 4g, though I'm pretty sure there is 3g, would I possibly get 4g if I had a strong enough antenna?Homefusion comes with antenna that is mounted OUTSIDE of your dwelling. That why they send someone out to install it. It also comes with the router. You're thinking of Share Everything data only plans. Where you pay $20 for the mi-fi and then pay extra on the data pending how much you want. Share Everything with a mi-fi and 10 GB would be $80 a month when you can get Homefusion for $60 for the same 10 GB. An considering the antenna is more power and outside you're a lot more likely to get reception with Homefusion. In either case it should be noted you'll need to pass a credit check and sign a two year contract.
-
How can I monitor my monthly data usage for all 3 computers in my house? I have an Airport base station and it seems there should be software to monitor it from that point rather than monitoring the usage for each computer and then adding it up.
The following example was one of dozens that showed up on a simple Google search of.....
monitor Internet data use on a Mac
Watch your Internet usage with NetUse Monitor | Macworld
Most service providers have an application for their users as well. -
Hw can I generate XY graphs directly in a vector data format for printing ie pdf
A further question re. Printing of Graphs
There are many similar questions but none where the answers are acceptably adiquite or two or three were the link was broken,
"Developer exchange forums have been moved" and a pointer to the new
site, unfort it was hard to find or guess the rest of the link.
So here is my angle on this problem;
So far I have tried;
Using property node: "App. Printing.Default Printer" to select the printer to use, then
Using Report Functions to print controls;
New Report, to generate a new report reference
Set Report Orientation
Set Report Margins
Set Report Font
Set Report Header Text
Set Report Font
Set Report Footer Text
loop for each page
Set Report Footer Text, With page number
Append Control Image to Report, several times
New Report Page
Until the end of the last page
Print Report
Dispose Report
Initially using existing XY-Graph controls from the front panel. These
are on a page of a Tab control to hide these controls while not in use
and allow them to be hidden while generating the printout.
Unfortunately when this page is hidden any graph scales set to
autoscale don't, (normally don't need to and would otherwise be a waste
of processor time), resulting in graph plots going off scale or
becoming a line along the axis.
An issue is that what is printed appears to be read from the screen, so resolution is much
lower than required for for printing, resulting in rather pixellated
printed versions. These prints will usually be emailed, so tried the
pdf995 "printer driver" but the resulting pdf file size is rather large.
Currently trying Plot-XY on a much larger picture so as to get
adequate resolution for printing, however suspect this will result in
much larger pdf files and probably cause other problems.
The preferred solution in this case will probably be to generate print
output, instead of based on raster images (ie jpg or png), but on a
vector format, maybe via postscript or directly in pdf format.
Similar graphs currently printed from Excel via pdf995
(or OpenOffice) result in files around 20 kb per page. these can be printed at any size
(at least upto 64 times) without becoming pixellated, so assume these
are vector based.
Currently a page with 4 XY Graph controls uses around 40 to 45 kb per
page but resolution is poor and overcoming that may push file size up
to 150 to 200 kb per page, and the whole job can be 50 to 100 pages.
Are there any functions to generate XY graphs directly in a vector data format preferably in pdf or via PostScript format.
Cheers
DarrylHi Darryl,
I was able to reproduce the issue you were seeing, in which a report generation was taking up a large amount of space per page in a PDF utility. I found; however, using my attached VI (notice that it is set to *.png) and the CutePDF utility (free download at http://www.cutepdf.com/) I was able to get a per page size of about 10 KB. Also using the png I found that the image quality seemed to be quite high.
Please try incorporating this solution into your application and see if it reduces your file sizes.
Thanks and have a good evening!
Cheers,
Jonah
Applications Engineer
National Instruments
Jonah Paul
Marketing Manager, Embedded Software
Evaluate the LabVIEW RIO Platform! - ni.com/rioeval
Attachments:
print_XY Graph.vi 23 KB -
Enterprise Role grants in jazn-data fail for AD Provider User Accounts?
Hello All,
I have enterprise roles defined within my jazn-data.xml for my 11.1.1.4 web application. We just recently switched user accounts over to an active directory provider for authentication. So, I have user accounts associated with the active directory provider that are assigned to my enterprise roles. This is working fine because all of my EL expressions of the form #{securityContext.userInRole['EnterpriseRoleName']} are working great.
However, all of the grants in jazn-data.xml for pages that should only be viewable by users with this role are now not working. Users with this role see a "Internal Server 500" error with the message "oracle.adf.controller.security.AuthorizationException: ADFC-0619: Authorization check failed", rather than the related pages. This all used to work when the user accounts were not coming from the active directory provider.
As a work around, I've had to grant test-all view access to all pages, but hide controls and portions of pages that non-authorized users should see using EL like what I printed above.
This can't be right. Why are AD user accounts treated differently by WebLogic Server, when the security context indicates that the user has the proper role?
ThanksHaha... nice one. This is a low-key production app that is internal to this company. I can't have users with AD accounts, who used to have WLS internal accounts when the jazn grants worked, just stop using the application until some solution comes about. It may take days. I don't understand why you would leave such an unhelpful comment and then leave the discussion. Is this a precedence that you want set within your forum? Please help me to understand why this is a bad workaround. I'm just at the beginning of trying to figure out the root cause of this issue. A search didn't reveal any obvious answers, so I thought I'd reach out to my knowledgeable ADF friends on the forum to see if this was something that could easily be fixed.
Back to your comment -- why is this a mistake? I have always used the rendered attribute value to hide navigation points to pages that are supposed to be accessible to users with the enterprise role (e.g. rendered="#{securityContext.userInRole['EnterpriseRoleName']}"). This still works fine in the context of this problem, because the security context is working properly -- it's picking up user membership to enterprise roles. It's the jazn grants that are not working for the AD provider related users.
In this context, if some really smart user guesses the URL of a page I don't want them on because they don't have the role, then why can't I simply set rendered="#{securityContext.userInRole['EnterpriseRoleName']}" on the PGL that presents the body of the page? The content of the page isn't rendered. That's the point of the "rendered" attribute, right? Better yet, I could have a nice message that says that aren't authorized to view the page, rather than put a Java stack trace in their face. Why, then, as a temporary workaround, is this such a bad idea?
Thank you "sameera.sac" for the links. I'd seen the first one before posting and it wasn't pertinent. But I'll certainly research the others you provided.
Thanks -
[DME] Document about data mapping for HSBC ifile format (PP,ACH, COS)
Dear SAP experts,
I'm implementing an automatic payment module through HSBC in an SAP project.
My customer want to streamline their payments to vendors using automated
payments with HSBC.
I have a document about ifile description which show me information about the
structure and data format in HSBC ifile. I know how to create a DME format tree
but the HSBC format seem to be very complicated, it contains a lots of fields and
a lots of them I don't really understand.
I'm sure that many of you have done this before. Do you have any document about
data mapping for HSBC file format? I have a lot of fields leaving undone so any
relevant documents will be very helpful for me.
Hope you can help.
Thank in advance.
Maxielight.Hello Maxielight,
I too am working on this IFILE format for transmitting to HSBC for Indian INR payments & am using DMEE.
I'm struggling with a couple of fields in relation to PP.
1st is the 'Record Count' in FIle header, which is just a count of the total number of lines in the file.
2nd is the 'Total number of instructions in batch' in Batch Header section, because I'm trying to count using aggreation via reference node id, but because the Batch Header is level 1 & I need to wait for '2nd Party Details for PP' which is at a lower level I always get an error when I run the check with error 'aggregation not permitted because of field I'm using is lower level, or they are not in the same segment.
I've also tried creating a new segment with 'Delay output' but still get similiar error about the nodes being in differenet segments.
How did you get past this issue?
We are not using COS, instead we will print our own cheques in the office so sorry I cannot offer advise there.
Any advice you can offer would be appreciated.
Thanks,
Steve
Maybe you are looking for
-
I have a macbook pro and it won't ever complete a backup onto my time capsule
About 4 months ago, I bought a new macbook pro and time capsule. It seems to start backong up normally. Then about 2/3 of the way through its gets stuck backing up and never completes it. I called apple care several times and they keep telling me j
-
File Adapter -- Picking has to wait untill it get fully loaded/write.
Hi All, I need to pick the files from a folder and I need to pick the files only which has been written completely. I should not pick the file in the middle while writing, I need to wait untill it finishes the writing completely. Is there any setting
-
Installation of forms reports and oracle application server 10g
Hi, I have been using client server till now, now planning to move to 10g. Got the developer suite 10g. Tell me how and where to install forms/reports and Oracle application server... I mean forms reports should be on developer PC then what about app
-
How can i make a family account
ok so heres the story my brother has an ipod 5 and i have an ipad mini 2 and we wanna use our seperate apple id because when i go to purchases i see all of his history and i like to keep mine clean and tidy for some reason... i want my ipad mini 2 to
-
What's the relationship of Oracle content search products?
I'm puzzled about so many Content Search Products of Oracle, such as UltraSearch,SES(Security Enterprise Search), etc. What's the different? Thanks.