Re: Lynx K3011 Win8.1 Graphic driver crashes often

EDIT NOTE: This Message was moved to the top of this thread in order to assist us with an escalation. Please continue posting in this thread for all future post.
Nine,
PM has been sent to you with the required information. This is really a bothersome (and apparently prevalent) problem and I would think it would get the attention of your support staff
EDIT NOTE: This Message was moved to the top of this thread in order to assist us with an escalation. Please continue posting in this thread for all future post.
Solved!
Go to Solution.

I have the latest Intel Graphic Driver but sometimes, and quite randomly the driver crashes when I unsleep the tablet.
I happens about 50% of the times my tablet goes to sleep.
Detailed explanation:
The tablet goes to sleep. When I wake it either with the power button or with the front button it takes 5 seconds for the screen to go on and a ballon appears saying "Driver stopped responding and has recovered" for my "Intel Graphics Accelerator Driver for Windows 8" . And 1 out of 10 times it cannot recover: blue screen of death telling to look up igdkmd64.sys!
Does anybody know how to repair this? 
Driver version: 9.14.3.1160
Driver date: 16.06.2013
 Link to image 1
Link to image 2
Moderator note: images totalling more than 50k converted to links per forum rules:  Lenovo Community Participation Rules

Similar Messages

  • CS5.0.2 causing graphics driver crash

    Updated to Premiere 5.0.2 and Media Encoder 5.0.1 - when I export (inside Premiere as well as sending to Media Encoder, Premiere/Media Encoder freezes up and I get a Windows message to say that the Graphics driver has crashed and it has successfully recovered.  Reverted back to Premiere 5.0.1 and can successfully export without issues. Anyone experiencing similar problems?  I have latest WHQL release Nvidia driver which has not given any hassles.

    Does your error message look like this?
    http://dl.dropbox.com/u/1426292/share/PPRO_5.02_GPU_Crash_01.JPG
    I have the same graphics card (GTS 250) and I have had some problem as well.
    Here is a thread that I started when I found issue related to the GPU and large image files: http://forums.adobe.com/thread/673072?tstart=0
    Here is another thread that I have been contributing to...the person that started the thread has the same graphic card as well: http://forums.adobe.com/message/3102758
    I had mixed results from the update to 5.02, but the cons out weigh the pros when the hack is considered.  So, I have since decided to wait until I can afford a supported card...hoping that will help.  Below is what I posted on the last forum that I provided the link to.  It illustrates my results with the update and different drivers.  I would love to figure out how to make the GTS 250 reliable, please post any new findings that might be helpful.  Thank you.
    Quote:
    I have found problems with the Nvidia driver 258.? on my machine.  While I did gain some marginal ability to work with larger images using the GPU, I started to get frequent OpenGL error messages and crashing in After Effects with the updated driver, so I have reverted back to version 197.? and all seems to be well again.
    It makes me worry using the "hack" on video jobs.  The hack is fun to play with to see how well the playback can be using the GPU, but I don't want to work on time sensitive material always wondering if something I add to the timeline will cause it to crash, or worse, corrupt a project file.  For me, I don't think the benefits out weigh the downside of the "hack".
    I have considered using the "hack" on video only projects, but I don't know if the problems will eventually turn up on long projects or not.  Most of my most recent projects have been fairly short.  I do realize that my large images  that have causing the crashes are huge (approx. 4300 x 2800), but in software only mode they are not a problem at all...really smooth.  If I had more time, I would fine the maximum image size that I could work with without causing my system to crash, but I don't have that much time to play with it.  It seems that the smaller the image, the longer it takes to make it crash, but eventually, I can always make it crash.  So, I wonder if any image size could be a problem, but it just takes longer for the crash to occur?
    I really wish that someone with a supported card would try some large images and run it through some testing.  Once I get a supported card, my large images will be my first test.  If it crashes with a supported card, I'm not going to be real happy.  Some have suggested the problem may be the amount of RAM on my GTS 250, but my card has 1GB, which is about how much many of the supported cards have.
    I am wondering if the GTS 250 just doesn't have enough muscle to work with the images?  Anyone with a supported card want to give it a go?  The time would be greatly appreciated.

  • T61p Graphics Driver crash on Resume from sleep, intermittent BSOD

    I have a T61p type 6458-BS9 with S/N L3-xxxxx, built August 2008.BIOS version is 2.21 
    Every time the PC wakes up from sleep, I get a message that the graphics driver has "succesfully recovered" (i.e. it crashed). One out of every three times, the PC wakes up, but the screen stays black and I have to forcefully reboot the PC. At regular intervals, I also have a BSOD referring to the same NVidia driver.
    The driver installed is the latest version on the website, 175.97 which dates back to June.
    I don't play games, so the other "resolved" issue on this thread does not seem to apply.
    Does anybody know how resolve this issue?
    Message Edited by erwinm on 12-15-2008 01:58 PM
    Moderator Note; s/n edited for members own protection 
    Message Edited by andyP on 12-15-2008 11:03 PM

    Hi,
    I too have exactly the same problem with display corruption after waking from sleep (X200 7454-CTO - windows 7 X64). I have disabled the intel VT extensions in the BIOS but the problem still occurs.
    I have now installed the latest display driver from intel's site (8.15.10.1986) to avoid using the Lenovo 1968 packaged driver. This means I have lost the on-screen brightness display functionality but I can live without that. I will let you know if I have more problems using this driver.
    I assume this problem will get fixed at some point as presumabley those customers who ordered X200's with windows 7 preinstalled will be having the same problems?
    Regards,
    Martin

  • Graphics driver crashing on new MBPr 15" w/ discrete graphics.

    I bought the 15" MBPr w/ discrete graphics card a few days ago and installed Windows 7 via boot camp. Everything was working initially but my graphics drivers began crashing repeatedly. I restarted my computer which stopped it for a while. In this time I did things from school work to play video games without any problems. The next day after starting it up again the drivers began crashing over and over again. Has anyone else had this issue? I tried updating the graphics driver but received an error saying the card i

    I think we're all using Windows 7 x64. As you are an empolyee of HP, will you give us an overview of how HP is handling this problem (if they even are)?

  • GX740 065NE, MS 1727. Screen freezing, graphic driver crashing.

    Hello, i got problems with the screen freezing, graphicdriver crashing, screen even getting spiky and flimmering when trying to start games.
    I used to have problem with high fan speed/noise, graphicdriver crashing, screen freeezing, BSOD and so on. Well ive been having it like this since i bought this laptop.
    Anyway, so few days ago i decided to try updating the Vbios.
    I updated the Vbios and i did fix the high fan speed, much lower noise.
    The problems with screen freezing was increased after the Vbios update.
    Alltho it seems like im not getting anymore BSOD's at least.
    I have tryed both the latest graphic drivers from AMD ATI and from MSI's website, non of them solved the problem.
    MSI GX740 065NE, MS 1727
    Product SFU: BR54304G50S7P
    ERP PIN: 957-17273e-065
    Serial number: GX740-065NEK10050001333
    39.5 cm x 27.8 cm x 4 cm 3.2 kg
    17" Glare TFT 1680 x 1050 ( WSXGA+ )
    Intel Core i5 430M / 2.26 GHz Dual Core
    4 GB (2x2) DDR3 SDRAM
    500 GB - 7200 rpm
    DVD±RW / DVD-RAM
    ATI Radeon HD 5870
    1 GB GDDR5 SDRAM
    Nätverksadapter - Ethernet, Fast Ethernet, Gigabit Ethernet, Bluetooth, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n
    9-cells battery
    Microsoft Windows 7 Home Premium 64-bit
    BIOS Build: E17271MS.106        12/15/2010
    EC Build: 1727EMS1.404           12/156/2009
    Drivrutinens förpackningsversion   8.831.2-110308a-115930C-ATI   
    Catalyst-version   11.3   
    Leverantör   ATI Technologies Inc.   
    2D-drivrutinsversion   8.01.01.1134   
    Sökväg för 2D-drivrutin   /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/CLASS/{4D36E968-E325-11CE-BFC1-08002BE10318}/0000   
    Direct3D-version   7.14.10.0817   
    OpenGL-version   6.14.10.10600   
    Catalyst Control Center-version   2011.0308.2325.42017   
    Huvudadapter      
    Grafikkortstillverkare   Powered by AMD   
    Grafikkrets   ATI Mobility Radeon HD 5800 Series   
    Enhetens ID   68A0   
    Leverantör   1002   
    Undersystemets ID   1054   
    ID för undersystemets leverantör   1462   
    Grafikbussens kapacitet   PCI Express 2.0   
    Maxinställning för buss   PCI Express 2.0 x16   
    BIOS-version   012.020.000.042   
    BIOS artikelnummer   BR35757.027   
    BIOS-datum   2010/09/14   
    Minnesstorlek   1024 MB   
    Minnestyp   GDDR5   
    Huvudklocka i MHz   700 MHz   
    Minnesklocka i MHz   1000 MHz   
    Total minnesbandbredd i GB/sek.   64,0 GB/sek.   
    Idle graphic:
    Temp 47%
    Activity: 0%
    Fan speed 30%
    Amd Overdrive activated:
    700mhz GPU
    1000mhz memory
    CPU idle usage:
    0.5%
    RAM idle usage:
    38%

    If you've had the problem from day one, then yes, I think an RMA sounds like a good course of action. It sounds like you've done everything you can by changing the drivers, updating the VBIOS, and so on. Only thing I can suggest is to uninstall the current graphics drivers, run >>Driver Sweeper<<, and then install the latest drivers again. I'd suggest installing the latest patches for the games you play, but if they all freeze then it's obviously not a game issue.

  • HELP! Graphics driver crash

    Hi there, i just build myself a new PC. This is my first 64 bit so i didn't expect it to go smoothly, that's why i am here :(.
    The problem i seem to have is whenever i try to install my graphics drivers, after it reboots the graphics card displays up to the "windows XP" loading boot screen, then just goes completely blank.
    I tried using a different monitor, and using the secondary graphics port on the gfx card, to no avail. Anyone know what's going on?  :(
    GFX card = leadtek nvidia 6800 std 128Mb (OEM)
    Motherboard = msi ms-7025 nforce 3 mainboard
    Thanks in advance,
    Ed

    Quote
    i get a lot of "add new hardware stuff coming up that i install
    Can you expand on this whats added
    Quote
    you have NVIDIA nForce3 AGP Host to PCI Bridge shown in device manager under System Devices
    did you find this

  • Firefox 5 is causing my Intel graphics driver (it is up to date) to crash - never had a problem with Firefox 2, 3, or 4.

    Having repeated intel graphics accelerator driver crashes - screen goes black and it recovers - get little error message screen as what happened. Happens frequently. I have done driver scans and everything is up to date. Did not have this problem with firefox 4

    This is my problem too. I saw a post about a computer crash above. I found if I wait (various periods of time) the computer restores and firefox stays broken. Although being impatient, I would reboot the computer anyway.
    I HAVE SWITCHED TO CHROME until this problem is resolved. You can import all your bookmarks and passwords and live happily ever after. When and If this problem is resolved, I may switch back (been loyal for years and years).. if it takes too long, I'll probably just stay with chrome as my new browser.
    I have also seen a similar screen to the "BLUE SCREEN OF DEATH" that scared me, but it was a graphic driver crash warning (windows 7) nothing more. However I did pee myself a little.
    For a while I thought my graphics card was overheating or something, but found the crashes coincided with firefox boot. That's when I discovered this thread. Thanks folks for posting.

  • Lynx K3011 won't wake up from sleep

    I have a Moko Slim Cover Case for my Lynx.  I noticed that often, after I close the case and the device goes to sleep and wait a while to use it, the tablet will not wake up from sleep.  I have to hold down the power button to shut it off and then release it and press the power button to turn it on again.
    If I close the case and open it shortly after that, it wakes up just fine, but after being closed for some length of time, it will not wake up.  I think it has to do with the auto sleep function with closing of the case because if I don't close it and let it sit and it goes to sleep, it will wake up.
    Does anyone else who uses this case have difficulty waking up the device after leaving it closed for a period of time?

    I have the moko case and I have not experienced any problem directly related to the case.
    Have you tested this with the case off to see if it behaves the same?
    Also, see this thread regarding video driver problems:
    http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Re-Lynx-K3011-Win8-1-Graphic-driver-crash...

  • Qosmio X505-Q870 Graphics Constantly Crashing

    Hey guys,
    I purchased by laptop mid-March and since late-April, this odd behavior has been occuring.
    So, while I'm doing work on the laptop (regardless of game, autocad, or just document work) sometimes, the screen will go black, it'll come back on without any card running, go black, and then come back up with a little notice at the right bottom corner of Windows saying that the NVIDIA graphic driver crashed and has been restored.
    Anyone know what's up?
    I paid 1.5 grand for this and am worried that there may be a problem with the graphic card.
    Thanks.
    OS: Windows 7 Professional 64-bit

    I still have this same problem.  If you get any resolution to this, please let me know.
    Thanks,
    Andy

  • Power Map causes Intel HD Graphics Driver to crash or Blue Screen (BAD_POOL_HEADER)

    Hello,
    I have a user who is attempting to use Excel 2013's Power Map Add-in, however, he had this to say:
    "I can regionally map counties without an issue, but the Zip Code mapping is
    always giving me problems. It may be because there are so many zips in the
    state."
    He is using a Lenovo 440p laptop with Windows 7 Professional x64 and I have already updated his Intel HD graphics driver using the official driver tool from Intel, has well
    as Lenovo's driver update software. Also, here are some screenshots below. Are there plans for a hotfix or can someone advise on a solution? Thank you. 

    same problem here, easily shows column, bubble or heat map but crashes every time when I choose region map. Trying to draw 64 countries and one single value column on a world map. any solutions?

  • X1 Carbon 3rd.gen Chrome crashes on Youtube videos after Intel HD Graphics Driver 10.18.14.42 update

    Hi!
    Chrome crashes at Youtube videos after Intel HD Graphics Driver 10.18.14.4206 update on Lenovo X1 Carbon 3rd.gen. Since the driver update yesterday, laptop starts suddenly to overheat enormously and become super-noisy as soon as I try to open a Youtube video , no matter on Youtube page, or a external provider with embded youtube video. Chrome becomes unresponsible and has to be terminated. Laptop continues to use fan at extreme level for abot 20 more seconds and then cools down. IE plays youtube videos without problem and all the other videos from Facebook i.e. are playing. Tried original and also Beta version of Chrome, which doesn't help.
    Kind regards,Daniil

    Hey guys, T450s user here. I think I found an even better workaround for this issue without having to disable hardware acceleration and lower the performance of Chrome as a whole. After long trial and error I found the that driver-related issue is generally narrowed-down to HTML5 acceleration for video playback. By installing the following Chrome Extension I was able to revert YouTube back to the old Flash-based YouTube player and now even 4K playback is absolutely stellar on my T450s running the latest .4222 driver directly from Intel's site! https://downloadcenter.intel.com/download/24964/Intel-Iris-Iris-Pro-and-HD-Graphics-Driver-for-Windows-7-8-8-1-64-bit This is of course by no means a fix of any kind but I think it is the best workaround that we have to this date without having to sacrifice performance in Chrome as a whole. Try it out guys! https://chrome.google.com/webstore/detail/disable-youtube-html5-pla/enmofgaijnbjpblfljopnpdogpldapoc?utm_source=chrome-app-launcher-info-dialog

  • Why does firefox 7 crashes the system if Quadro NVS 135M graphics driver is installed?

    Why does firefox 7 crashes the system with a Quadro NVS 135M graphics cards installed?
    It happens immediately after opening Firefox on a two screen system. You get a message saying the Graphics Driver stopped responding, but that it managed to recover, but after a while the system freezes completely. You can't even CTRL+ALT+DEL.

    I get this too on with my nVidia GTX460 card. In my case the screen goes black. It happens once every few days, and for a while I could not figure out why. I was forcing a shutdown to get the screen back.
    But I put the computer to sleep and woke it up, since that restarts the video, and this let me see what was wrong. The only error message is it reports that Firefox hung. There is nothing else in the Event logs.
    I'm running Windows 7 with all the updates from Windows Update, and my video driver is 285.62, but his also happened with the 260.26 driver.
    I imagine this is happening a lot, but people aren't able to isolate the cause.
    I'm looking for a fix, not a bypass.

  • Graphics driver incorrect/causing crash?

    I recently installed a Radeon HD 5870 graphics card and every once in a while, as I'm working on the computer, the screen goes grey.
    Sometimes it's static, sometimes it's just a plain grey field, and sometimes it's grey with a bunch of vertical lines.
    I'm not really up on graphics hardware, but I'm wondering if I don't have the right graphics driver for the 5870.
    I checked on the available drivers for this card and apparently they only go up to Tiger and I'm using 10.6.8.
    Any ideas?

    Run iStatPro or Temperature Monitor and see if there is a correlation.
    2007 MacPro2,1 ? FBDIMMs and heat w/ 8-core (very few 3GHz 2008s out there)
    The 5870 would be overkill in price/performance etc for pre-2008s.
    Radeon 5870 5770 2006 Mac Pro
    And there are issues sometimes not just with flashed versions. Really helps if you know enough to know what hardware. Like even Mac model etc.
    ATI Radeon 5770 2008 Mac Pro Support QE, FCP

  • T410 graphic card driver crash under win7 64x OS

    my T410 crashes everytime when WIN7 AERO function is triggered. e.g the preview windows u get when u place ur mouse over the IE icon on the taskbar.
    I've updated my gpu driver, but the problem remains, does anyone have the same problem and konw how to solve it? or I just have to wait for lenovo to release a new patch to fix it?
    my laptop's spec:           T410 2522-RT5   ram:4g   gpu:nvs3100m 256mb  OS:win7 64x professional edition  cpu:i7 m620

    sorry, there is a typo in the text above ---- its not my pc crashes, its the grahpic card driver crashes when AERO is triggered

  • Boot Camp - "No AMD graphics driver is installed" error during win8.1 post-install

    I have Macbkook pro early 2011 (i7 2.2ghz, 16 GB RAM, radeon 6750M 1GB)
    I used boot camp utility to install win 8.1 - it completed without any problems.
    When the installation was completed the bootcamp wizard opened automaticaly and this was shoved to my face:
    The process continued until the "Installing Intel Graphics" process. Then the screen just went blank. I waited some time
    assuming it was just a gpu driver issue and the installation is progressing. I guess I was right since the mac rebooted after about 5 minutes.I re
    When I wanted to boot to windows I was constantly welcomed by black screen after the "windows splash-screen-spinning-animation thingy".
    I went to safe mode to see what's going on. It turned out that if I TURN OFF my INTEL HD 3000 driver then I can boot to normal mode but
    the 6750M drivers have yellow exclamation mark (error 43 in details) in device manager. I need that gpu enabled since I do some game developent which requires gpu power. I tried reinstalling ati drivers and looking for new ones on the internet - each of them failed. What could be the problem?
    Can anyone help me out?

    Hello HPENVYm6-1201TX,
    I have read your post on how your notebook computer is producing an error message in regards to your AMD driver, and I would be happy to assist you in this matter!
    To ensure that the software is installed and functioning properly, I recommend performing a clean boot on your notebook. To do this, please follow this document on How to perform a clean boot in Windows. This should help eliminate software conflicts that occur when you install a program or an update or when you run a program in Windows.
    The next step I suggest is to remove the AMD driver installed on your computer, and install the driver provided on HP's website. If you need to, you can use this document on how to remove software from Windows 8.1. You can find the necessary driver by click on the AMD High-Definition (HD) Graphics Driver.     
    Instead of updating the driver from AMD's website, please follow this document on Using HP Support Assistant (Windows 8) to update the necessary drivers.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Maybe you are looking for

  • WebHelp search generated by RoboHelp 8 not working in Safari 5.0

    Hello, I'm new to the forum, but have been lurking for a  while, and have benefitted greatly  from answers found here.  Thanks! I use RoboHelp 8 HTML - recently upgraded from X5  - to generate WebHelp for a  cross-browser compatible web app.   I gene

  • Problem  with importing par file in portal server 6.2

    Hi everyone, I got the following error when trying to import IFRAME provider into portal server 6.2. Operation failed. ERROR: provider element has no version attribute Below is the command I used. I run it as a file - I supply the password at the com

  • Sync 8530 with Windows 7 Dell device

    My computer crashed (I had a Dell with Win 7) and was able to sync with my 8530 curve. I installed the Blackberry Desktop Software on my new computer, and the computer will not connect with the 8530. I can't get anyone at Blackberry, and I just tried

  • How to set SSL from an Webservice EJB client

    I want to invoke a web service from a stateless session EJB. How do I configure Weblogic 9.0/8.1 so that the transport uses SSL? I have a set of SSL related properties that I want to set e.g. Client Authentication Enabled, Private Key file, Client Ce

  • Exploratory testing - is there a way to link test runs to existing bugs

    Hi, We have a number of bugs which we are testing prior to business users performing their testing and signing off the bugs.  We dont have the time to write detailed scripts and are just performing a sense check that the fixes have been applied.  We