Re: Mac OS 10.5.8 (branched off from Reader topic)
hi I got adobe flash player I think my mac hates the one I got how do I update it or get a better one for 10.5.8 Mac OS X thanks
Flash Player 10.3.183.90
Inside that are a few folders. One is named "10_3_r183_90_intel".
Inside that folder is a flashplayer_10_3r183_90_mac_intel.dmg (Don't worry that it says "Intel" - it's the only installer for 10.3.183.90 there is)
Double click that and it will mount on your desktop, and open a window with the installer.
Right click the installer and choose "Show Package Contents"
Go to: Contents/Resources and double click the Adobe Flash Player.pkg file
The installer will open, ask for your Admin password, and it will install.
Similar Messages
-
My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.
My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.
-
I'm running Adobe 9 pro on snow leopard and when I save or print from word for mac 14 the bottom gets cuts off. Can someone help?
Ah! You're creating a PDF out of Word through Acrobat. The cutoff is most likely being affected by the printer chosen.
When you call up the print dialogue in Word, check to see what printer is being used. If it's a typical inkjet printer, Acrobat is using the print margins of that printer as the cutoff area. Since most such printers can't print to the last inch and half or so of the paper, that's where it would be cut off.
Near the bottom, under the preview of the document, click on the Page Setup button. It doesn't really matter which printer you select here. Under Paper Size, choose Manage Custom Sizes. Under the Non-Printable Area heading, choose the same printer and set the paper size you're using.
Note that the unprintable margins for that printer will be filled in automatically. That's what's being cut off. Click the + button to create a modified version. The default will be "Untitled". Give it a new name if you want. Then set all of the margins to zero. Click OK. Now you'll have that as a choice under Paper Size. Doesn't matter that the actual printer can't use this setting since you're going to a PDF. Click OK to get back to the main Word print dialogue.
Now choose Save as Adobe PDF. It should give you an exact duplicate of what's on screen in Word since as far as Acrobat is concerned, your "printer" has no unprintable margins. -
Is it better to put Mac in sleep or just power off?
Hi there,
I am a new user for Mac, (i just have one Macbook Pro) would very much to know the suggestion: either we should close the lip, put the mac in sleep mode or power off every day when finished the work?
which one is better for computer? someone says better not turning on and off every day, do so unless you will not use Mac for days. but I also found people says keep the computer in sleep mode might have trouble to wake it up later...
any experts suggestion?
thanks,I would not regard myself as expert and you are going to get opinions for both approaches. I have just passed on a 3 year-old MacBook Pro that has never been off, apart from updating when restarts are required. Similarly, my iMac sleeps (protected by UPS) and is not turned off. I am happy this way.
I would take slight exception to your process, however. In my opinion, I put the MacBook Pro to sleep by using OptionCommandDelete (or the Apple menu) and wait until the power light pulses before closing the lid. -
Will Upgrading Mac OS X delete the windows off the hard drive?
Will Upgrading Mac OS X delete the windows off the hard drive?
Will Upgrading Mac OS X delete the windows off the hard drive?
If you're using multiple partitions, no. If you're using an image with Parallels Desktop or VMware Fusion, only if an Erase & Install is done.
(40716) -
My Mac book pre suddenly got power off meanwhile it was fully charged. I tried to turn on but it's not working. I reconnected charger and the green light showing with blinking. How can I fix it?
cooldedar wrote:
I reconnected charger and the green light showing with blinking.
Well the blinking light shows it's charging, however just to make sure.
Reset the SMC, then connect the machine to a power source that doesn't have a lot of other power items on the same lines (in the walls) in the same room and see how it is in the morning.
For instance use a powerline in another spare room that isn't being used as much.
https://support.apple.com/kb/HT3964 -
My mac book pro keeps getting kicked off home wifi
My Mac Book Pro keeps getting kicked off wifi.When I get kicked out I turn Airport on and off ,it then works for a few minutes then I have to turn Airport on and off again.Any Ideas?
Thank you
JohnHello there Joanny,
I have a neat lil gem here about troubleshooting wifi connectivity on the Mac OS platform. Named Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6 it can be found here http://support.apple.com/kb/HT4628?viewlocale=en_US. I recommend this section first:
Use these steps if your computer disconnects from its Wi-Fi network unexpectedly.
Check your range to the Wi-Fi router and reduce the effect of interference.If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.See Potential sources of wireless interference for more information about interference and solutions.
Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router or ISP. In that case, contact the manufacturer of your router or your ISP.
And this section if needed: Symptom: My Mac does not connect to the Internet.
Take care,
Sterling -
Mac Pro crashes and turns itself off
Hello, hope someone can help me!
I have a 2008 Mac Pro and recently it's been crashing and restarting itself. The first two times it crashed it wouldn't restart so I took it to the Genius bar where they had it for a total of 6 days running various tests to try and get the problem to happen again and testing all the hardware, Disks, RAM, Graphics card etc but they couldn't find a problem!
The last time I took it to the Genius bar they reinstalled the system and when it crashed yesterday I was able to get it to restart and it's now running again. I was able to get a crash report (see below) from when it crashed yesterday and hopefully there's someone out there who can decipher this and see what the problem was?
Interval Since Last Panic Report: 577038 sec
Panics Since Last Report: 2
Anonymous UUID: AAF84E9C-DB98-5B66-4879-626CF5B74DB4
Wed Feb 13 11:42:48 2013
panic(cpu 4 caller 0xffffff800b8b7bd5): Kernel trap at 0xffffff7f8da2821e, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x000000010d214770, CR3: 0x00000001aeb3d000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0x05058d48e5894855, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80f4513d20, RBP: 0xffffff80f4513d30, RSI: 0x000000002c977ae8, RDI: 0xffffff802daead88
R8: 0xffffff80f4565078, R9: 0x7ffffffffffffffe, R10: 0x00000000ffffffff, R11: 0x00000000ffffff80
R12: 0xffffff80f4513dc7, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff8021852070
RFL: 0x0000000000010206, RIP: 0xffffff7f8da2821e, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000010d214770, Error code: 0x0000000000000000, Fault CPU: 0x4
Backtrace (CPU 4), Frame : Return Address
0xffffff80f45139c0 : 0xffffff800b81d626
0xffffff80f4513a30 : 0xffffff800b8b7bd5
0xffffff80f4513c00 : 0xffffff800b8ce4ed
0xffffff80f4513c20 : 0xffffff7f8da2821e
0xffffff80f4513d30 : 0xffffff7f8da28452
0xffffff80f4513d50 : 0xffffff7f8da285ee
0xffffff80f4513d80 : 0xffffff7f8da278fa
0xffffff80f4513e00 : 0xffffff800bbb1c24
0xffffff80f4513e40 : 0xffffff800bb977aa
0xffffff80f4513e80 : 0xffffff800bba0090
0xffffff80f4513f50 : 0xffffff800bbe182a
0xffffff80f4513fb0 : 0xffffff800b8ced33
Kernel Extensions in backtrace:
com.intego.kext.VirusBarrier.AppBarrierKPI(10.6.13)[20EED087-D04B-9B24-B745-75F A012BBD2A]@0xffffff7f8da27000->0xffffff7f8da29fff
BSD process name corresponding to current thread: WebProcess
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000000b600000
Kernel text base: 0xffffff800b800000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 9387153888614
last loaded kext at 51772157201: com.intego.iokit.VirusBarrierX6Service 10.6.13 (addr 0xffffff7f8da35000, size 36864)
last unloaded kext at 182103314479: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f8d819000, size 8192)
loaded kexts:
com.intego.iokit.VirusBarrierX6Service 10.6.13
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.13
com.intego.kext.VirusBarrierKPI 10.6.13
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBDisplays 353
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.iokit.CSRBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.GeForce 8.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleIntel8254XEthernet 3.1.1b1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AirPortBrcm43224 600.36.17
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBUHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleUSBHIDKeyboard 165.5
com.apple.driver.AppleHIDKeyboard 165.5
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 8 GB, SMC 1.25f4
Graphics: NVIDIA GeForce 8800 GT, NVIDIA GeForce 8800 GT, PCIe, 512 MB
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x802C, 0x3138484631323837324A4438304544364434
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x802C, 0x3138484631323837324A4438304544364434
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x802C, 0x3138484631323837324A4438304544364434
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x802C, 0x3138484631323837324A4438304544364434
Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0D9B, 0x000000000000000000000000000000000000
Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0D9B, 0x000000000000000000000000000000000000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en2
Network Service: Built-in Ethernet, Ethernet, en0
PCI Card: NVIDIA GeForce 8800 GT, sppci_displaycontroller, Slot-1
Serial ATA Device: ST3320820AS_P, 320.07 GB
Serial ATA Device: WDC WD5000AAKS-41YGA0, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA0, 500.11 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: hub_device, apple_vendor_id, 0x911c, 0xfd500000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd530000 / 4
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd532000 / 5
USB Device: Apple Cinema HD Display, apple_vendor_id, 0x921c, 0xfd520000 / 3
USB Device: PTZ-930, 0x056a (WACOM Co., Ltd.), 0x00b2, 0x3d100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 2
FireWire Device: built-in_hub, 800mbit_speed
FireWire Device: unknown_device, unknown_speed
If anyone can tell me what's causing the problem I'd be most grateful.
Many thanks,
ChrisYour wounds are completely self-inflicted:
The crash was deliberately caused by:
Kernel Extensions in backtrace:
com.intego.kext.VirusBarrier.AppBarrierKPI(10.6.13)
You need to remove these extensions by un-Installing Intego Virus barrier.
com.intego.iokit.VirusBarrierX6Service 10.6.13
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.13
com.intego.kext.VirusBarrierKPI 10.6.13
I recommend Thomas A Reed's Mac Malware Guide:
http://www.reedcorner.net/mmg/ -
IMessages to an iPhone occasionally appears with words cut off from end
When sending texts from iMessages to an iPhone, the text occasionally appears on their iPhone with a couple words cut off from the end. It appears fine in the iMessages display/history. Here's a few things I've noticed:
- It's repeatable. For example, the following message always causes the issue: "man, why are you here? Two are in testing places". On the iPhone it appears as "man, why are you here? Two are in testing".
- It's a problem with iMessages. If I send the exact same text from the iPhone, it goes through just fine. The message has to originate from MacOS iMessages. (I'm using the latest Mountain Lion and all updates as of 12/21/12)
- The full message is actually being successfully transferred to the phone; it just does not display correctly. There are two pieces of evidence for this. If on the iPhone, the user copies the truncated message and pastes it somewhere else, the full message is pasted! Moreover, on the top level the messages app (where you see the last message from all the recent people you texted with), the full message displays.
- It can happen with both short and longer messages. Here's another longer message I noticed got cut off: "That's funny that you though I was joking when I said I was debugging. Why is that so weird?"
- It has something to do with the length of the message or how it is being wrapped. I can create modifications of those texts with the same length, and they will cut off. (That said, some modifications will not cause the problem, so it's more than just length. Maybe it has something to do with how it wraps the words?) Usually adding a few words to the message will allow it to go through.
- It always cuts off at a space. In other words, it will not truncate something in the middle of a word.
- I have only seen it cut off one or two words before.
Apple really needs to make this a high priority fix. Unreliable messaging of this sort is a deal-breaker for iMessages, IMO. My guess is that they haven't had more reports for this because people simply don't notice unless the last word or two totally ruins the meaning of a text and the other person points it out.
Can people try to recreate this on their machines? If so, please do so and file a bug report (http://www.apple.com/feedback/macosx.html). All you have to do is get on your iMessage app and text one of those two messages to your phone. If it appears truncated on your phone, you've confirmed it. You're welcome to use any of my post in any bug report.Hi,
some entries had    (tabs probably)
I had seen these in Quicklook at the point where the Message appeared to show double spaces after a Full Stop or Question Mark.
You are right that it have not dawned on me that I had not seen them between words.
It was TextEdit as well (Not sure why I said QuickLook)
29723AE1-6D8B-4932-8353-875164302786man, why are you here?¬†¬†Two are in testing placesn streamtypedÅË Ñ @ÑÑÑ NSMutableAttributedStringÑÑ NSAttributedStringÑÑ NSObjectÖíÑÑÑ NSMutableString ÑÑ NSString ïÑ +3man, why are you here?¬†¬†Two are in testing placesÜÑ iI 1íÑÑÑ
Part of this means the iMessages sent out.
The "repeat" is the sync back from the the ID the iPhone is using.
I am presuming the leading numbers are the iMessage identifier that iMessages uses to tell whether it has been Synced
Messages on the Mac is trying to enclose this in Coloured Balloon (or other style) and lists a Font and it's colour
NSDictionaryïÑ i íÑòò __kIMBoldAttributeNameÜíÑÑÑ NSNumberÑÑ NSValueïÑ *ÑÑ cü ÜíÑòò __kIMFontSizeAttributeNameÜíÑùûÑÑ q† ÜíÑòò __kIMFontFamilyAttributeNameÜíÑòò Arial BlackÜíÑòò&__kIMBaseWritingDirectionAttributeNameÜíÑùû
The sync from the iOS device lists
¢†ˇÜíÑòò(__kIMMessageForegroundColorAttributeNameÜíÑòò #000000ÜíÑòò(__kIMMessageBackgroundColorAttributeNameÜíÑòò #2ba92dÜíÑòò __kIMMessagePartAttributeNameÜíÑùû¢†ÜÜÜ
( A less complicated "Balloon")
It is unlikely to be the Tab key as this changes Fields in Messages (From Text Entry spot, to Search spot, to the "To" spot.)
8:43 PM Tuesday; December 25, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I deleted notes on my mac but did not want them deleted from iPhone but after synching they are all done. Can I get them back?
Deleting on one device does not affect another device.
You can delete the App's on the iPhone and nothing will happen to the ones on the iPad.
1. You don't need to.
2. Settings->Cellular->"Use Cellular Data For" will show the data usage for each App since the last statistics reset
3. Settings->General->Background App Refresh Will show which Apps are allowed to get data in the background
4. It restricts it to Wifi. If the App requires internet access and Data is turned off, it will have to wait until the device is connected to a wifi network.
5. Nope, You just use up battery since the BT radio will continuously look for nearby BT devices.
6. The Personal Hotspot uses your cellular internet connection from your phone or other cellular device; whether you consider that secure or not I cannot say. It also depends on what you are doing while connected to the Hotel's wifi. I would not do online banking while on vacation though. -
My Mac Pro loses network connection after wake from sleep since Yosemite upgrade.
Mac Pro loses network connection after wake from sleep since Yosemite upgrade. Any one have this issue as well. And is there a work around?
Wi-Fi?
Wi-FI connection drops
Wi-Fi Problems in OS X Yosemite
Wi-Fi Problems in OS X Yosemite (2)
Wireless Diagnostics
Also try turning off Bluetooth.
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4) -
I accidentally moved iPhoto off from my tool bar. Now i get the message that iPhoto can't open because it may be damage or incomplete. Can someone help?
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List. -
I can update data from my Mac to my iPhone and iPad, and from my iPhone to my Mac and iPad, but cannot get data to update from my iPad to either my Mac or my iPhone.
If new calendar events entered on your iPad do not appear on icloud.com, go to Settings>Mail,Contacts,Calendars>Default Calendar on your iPad and be sure you have selected an iCloud calendar as your default and not something else like On My iPhone, a Gmail or Yahoo calendar, etc. If you haven't, make this change, then add a new event and see if it appears on your calendar on icloud.com now.
If your settings are correct and new events still aren't appearing on icloud.com, add any missing calendar events from your iPad to your calendar on icloud.com. Once the calendar on icloud.com is up to date with your iPad, go to Settings>iCloud, turn Calendars to Off, choose Delete from My iPad when prompted (they will still be in iCloud), then after a 15 seconds or so, turn Calendars back to On. Then add a new event on your iPad and see if it appears on your calendar on icloud.com now, and on your other devices. -
My mac osx 10.7.3 constantly disconnects from airport internet.
my mac osx 10.7.3 constantly disconnects from airport internet. I am able to reconnect every time but do this every 10 mins. i went to try and change channel but no airport base stations were found. i am positive it is not the router as all other devices stay connected. cant find any answers to my problem, just tons of others with the same issue!!!!
You can't discount your router just because the other devices work. The first thing I'd recommend doing is restarting the modem and router, then checking the router has the most up-to-date firmware (need to check that owners manual) and then you can check some other things like DNS settings and router channel conflicts with neighbors.
After restarting the router and double checking the firmware is up-to-date then I'd recommend checking the channel your router is on and what your neighbors use. You can download and use iStumbler, this will scan your area. If you are like most users neither you or your neighbors have changed the router channel from the default 5 or 6 channel. Look to see what channels are not being used and reset the router's channel. If that doesn't work then reset the DNS settings from the defaults your ISP uses. If you get to the point where the DNS does need to be reset here are the instructions:
1. System preferences
2. Network
3. Click Advanced
4. Click DNS tab
5. Click + sign
6. Add 208.67.222.222
7. Click + sign
8. Add 208.67.220.220
9. Click OK.
10. Exit System Preferences
If you want more info on the DNS please read CNET's DNS Article and MacWorld's DNS Troubleshooting articles. If all that fails then you can simply toggle the wi-fi on and off on the w-fi menu in the upper right of your screen. -
I accidently put the same keyword in all pictures. How to back off from that and just having the right pictures marked?
Once more after some thinking: I have a Lightroom backup from jan 5th. It seems better to use this, but how do I do to force LR to start from the latest backup?
11 jan 2015 kl. 18:11 skrev NicHamilton <[email protected]>:
I accidently put the same keyword in all pictures. How to back off from that and just having the right pictures marked?
created by NicHamilton <https://forums.adobe.com/people/NicHamilton> in Photoshop Lightroom - View the full discussion <https://forums.adobe.com/message/7085634#7085634>
I'm not a Mac user so can't speak specifically about using Time Machine but if it is possible to get to an earlier version of the Lightroom Catalog then I would try that, yes. Backups are another way of doing this. Just make sure you make a copy of your current Catalog before replacing it with another one.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7085634#7085634 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7085634#7085634
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Lightroom by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 16>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.
Lars Magnusson
Business Evolution
+46 70 245 28 90
Maybe you are looking for
-
How can I change my email account address on my Drop Box account. The present address is wrong.
How can I change my email account address on my Drop Box account? The present address is wrong.
-
Hi, I made the site in iweb, and uploaded it to godaddy. The site crashes in Safari when I click through the pages, making it unusable on any computer for about 5 minutes (but no problems at all using Firefox and IE.) The URL is http://sanafit.net/Ar
-
NO values of excise duty in J1IIN for Export
dear When i am doing J1IIN for export, the excise duty are not reflected on main screen of J1IIN.But it is displayed in Utilization Tab.I have maintain excise rate inJ1ID. Wht is the reason?
-
How to retrieve deleted entries of a database table
Hi, I accedentally deleted database table from se14. how to retreive the table of entries. regards , Rajesh
-
Illustrator CC 17.1.0 won't start on Mavericks 10.9.1
No plugin installed. Tried deleting the preferences several times. Installed latest wacom driver. Reinstalled two times Illustrator. Signed in and out of Creative Cloud. Verdana and Tahoma are installed. Tried this solution without sucess. Here is th