Re : Maintain number range interval "" for quants

Hi
While doing the transfer order i am getting the following error.
" Maintain number range interval "" for quants "
How to solve this.
Thanks
Anto

dear sir
go to Tcode : OMLW click for quants tab, give your warehouse number and maintain the number ranges, for your warehouse.
Regards
jrp

Similar Messages

Maintain number range interval "" for inventory document --help!

Dear all,
I running the FM - L_INV_DOC_CREATE for creating the physical inventory doc for WM ( warehose management ) level. But i get this error -> Maintain number range interval "" for inventory document. If i try to create it using the t-code LI01N,everything goes smoothly. Anybody haf any idea how to solve this? thank you.

1.Did u go into Number ranges for WM?
Yes
2.Did u click on assignment & number ranges not on Number range intervals
Yes
3.Di du cahnge it to 02 for all?.
Yes on first warehouse 111 all changed to 02 and on warehouse G02 just on TR and TO changed to 02
4.Did u select NR intervals? and give the number range?
Yes
5.Did u transport the intervals?
No, as I am working on DEV practice client. Dont need to transport.
6.Did assign the number rabges to ur Warehouse?
I assigned No. 2 to warehouse, not number range, can u ellaborate more on number range assignment.
I created migo for same material with different storage location and material and accounting documents are created. Even the number ranges are working on another warehouse created by colleague, but its not working on my warehouse and as mentioned earlier this is Dev practice client. No need to transport.

Maintain number range interval for master data upload for existing employee

Hi Experts,
1)I have the scenario to upload additional data for existing employees in PA. Employees are already existed in SAP HR , But additional Infotypes are required to maintain for those emploees
2) I have the senario where i have to upload master data for new employees.
Pls give the detailed description of how to maintain number range interval i.e. External or Internal for upload in both the above scenario. Do we have to maintain number range manually in master data record & then upload it Through BDC or LSMW?
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
Edited by: Rob Burbank on Jan 12, 2011 3:49 PM

>
s c patil wrote:
> 2) For new employees i have to maintain desired ( my or client?) number range in SAP system as External number range & then default that number range in NUMKAR & then maintain those number range in master data record & then get the data template filled by client & then upload the data & after that create new number range which is next to existing External number range as an Internal number range. & then default that Internal number range.
>
> Pls reply ASAP
Yes Mr. Patil...
For existing employees
you need to execute HIRING ACTION Through BDC with External number range. While recording you have to use atleast three infotype i.e. IT0000,IT0001,IT0002. In addition you can upload other infotype through PA30.
For new employees
While configuration you can create another number range as internal for new hiring. and use NUMKR feature as well.
Here I don't understand that why r u looking for upload process for new hiring, if it is not mass hiring. It should be day to day activities which would be done by user through PA40.
Best Regards,
Anand Singh

Re : Maintain number range interval "1" for quants

Hi
While creating transfer order the following error is coming.
" Maintain number range interval "1" for quants "
How to solve this.
Thanks
Mani

Dear,
Enter t-code OMLW.
Click on tab of For Quant.
Then maintain number range.
Regards,
Mahesh Wagh

Maintain number range interval 01 for posting change notices

Hi,
I am doing transfer posting using movement type 321 (quality to unrestricted) for one material.While posting i am getting error"Maintain number range interval 01 for posting change notices" Message no. L0015
WM is active for this material and doing this movement for one plant which is newly created in system.Wil you please advice for which document type i had to maintain number range.Please inform SPRO path / Transaction to be used to make required changes.
Thanks & Regards
Atharva

Maintain number range for posting change in tcode OMLW

Maintain number range interval "01" for inventory documents

hi,
when i am creating a physical inventory creating document t.code LI01 i got this eror:
Maintain number range interval "01" for inventory documents.where i have to maintain please reply me.
naveen

hi,
spro->log.execution>warehouse mgmt->activities->physical inventory---->maintain number ranges.
Regards,
velu

Maintain number range object for object J_1IINTNUM, year 2009, excise group

Hi SAP Guru !
Plz tell me the solutions quickly, Even after mantaining the required Objects in "J1I9" , when I am going to post GR , once again it is saying that ........
1 - >   Maintain number range object for object J_1IINTNUM, year 2009, excise group
       Message no. "4F159" .
2 - > Maintain number range object for object J_1IRG23A1, year 2009, excise group 21
       Message no. 4F159
3 - > Maintain number range object for object J_1IRG23A2, year 2009, excise group 21
        Message no. 4F159
Regards,
San

dear sir
while maintain number range , in the number column, it should be 01. other than 01, you will get same error.
so please check it should be 01 in the number column and year and number range interval .
regards
jrp

Maintain number range object for excise grp

Hi Gurus,
During stock transfer, while doing Goods receipt I am getting the below error
"Maintain number range object for object J_1IRG23D, year 2010, excise group"
Could anyone please tell me the trans code for maintaining no range for excise group...
Thanks,
Raja

Go to J1I9 T Code for a particular object object J_1IRG23D, execute and then give the excise group and maintain the number series.
Regards,
Nagesh
Edited by: Nagesh MS on Dec 20, 2010 3:59 PM
Edited by: Nagesh MS on Dec 20, 2010 3:59 PM

Maintain number range object for object J_1IRG23C1, year 2008, excise

Dear All,
I am doing the purchase cycle for Assets, while doing GR i am getting the below error, pls guide me
Maintain number range object for object J_1IRG23C1, year 2008, excise
Maintain number range object for object J_1IRG23C2, year 2008, excise
B/regds,
CB

Dear CB,
Use Transaction "SNUM", and give the object name as "J_1IRG23C1" and maintain number range for the financial year.
Do the same procedure for Object "J_1IRG23C2" and maintain the number range.
Hope this helps.
Njoy SAP
-Saravanaganesh

Maintain number range object for object J_1IINTNUM

Dear,
While doing GRN i am getting this error:
Maintain number range object for object J_1IINTNUM, year 2009, excise group
Maintain number range object for object J_1IRG23A1, year 2009, excise group E1
Maintain number range object for object J_1IRG23A2, year 2009, excise group E1
What i did is:
1) I maintained NR for Objects J_1IINTNUM, J_1IRG23A1,J_1IRG23A2 in J1I9 Tcode.
Still i am getting the same error in MIGO.
Regards
Utsav
Edited by: Utsav.agra on Nov 18, 2009 12:24 PM

Dear Pankaj,
thanks actually i wans maintaining number as 1 instead of 01.
Thanks
Utsav

Maintain number range object for object J_1IRG23A1, year 2007, excise

Hi All,
I have configured CIN in ECC 5.0. When i am doing MIGO getting errror that "Maintain number range object for object J_1IRG23A1, year 2007, " and
Maintain number range object for object J_1IRG23A2, year 2007, excise group 10
but i have already maintained number range for such object.
please guide me.
Regards,
Ravindra

Hi,
Which Number u given,
No year From number to number
01 2007 1 10000
I think u allready given,this is for checking.
Raghu

Getting number range interval for document type

Hi All,
My requirement is to display number range interval for any docnument type in SD.
I will elaborate my req. clearly.
We can see document type of SD in TVAK table. If we give document type for ex. ZOR the we will see number range internal assignment (NUMKI). The complete number range we can search through transaction VN01 through NUMKI value. But I didnt get any table to relate NUMKI or Sales document type and internal number range.
Please help me in searching database table to relate Document type or NUMKI and internal number range.
Regards,
Suresh.

Relation is as below:
TVAK --> AUART = "Sales Document Type"
NRIV --> OBJECT = "RV_BELEG" and
NRRANGENR = TVAK-NUMKI
Alternatively you can use FM: NUMBER_GET_INFO with the Number Range Number and Object to extract Intervals.
Regards
Eswar

Number range interval for characteristic 0CSTELMNTYP is missing

All,
I'm moving the infoobject 0COSTELMNT, which has as a nav attribute 0CSTELMNTYP. The transport moved fine to my Q environment, but not to prod, The error was as above and
Number range interval for characteristic 0CSTELMNTYP is missing
Message no. BRAIN049
Diagnosis
The interval for number range object BIM0001194 of characteristic 0CSTELMNTYP is missing. The interval is created automatically, when you run the system in the BW clients.
Procedure
Execute the corresponding action again in the BW clients, so that the interval is created automatically. Then you can drag numbers for the characteristic 0CSTELMNTYP to other clients.
I don't understand this - what do I need to do?
Thanks.
Dave

Hi Kedar,
I got the same issue which you mentioned and i ran the program to activate the master data object and it went fine in Quality system. But the problem here is iam unable to see the attribute data in the master data info object.
For example i added ZCNTYCODE nav. attribute to 0VENDOR and moved to quality and i got the activation problem issue for 0VENDOR and i ran the program which you mentioned in Quality and the activation went fine.
When i loaded the data for 0VENDOR iam not able to see the ZCNTYCODE data in Vendor master data P table. And iam able to see the master data in the table which we get from source LFA1 and in RSA3 and also in the PSA. Can you or anyone faced this type of issue.
Thanks for you help in Advance.
Sudhakar

Maintain Number range group for Internal order

Hello,
I have created Internal order type, now, i would like to create/maintain the number range group for this already created order type.
When i goto Maint Number ranges for orders->click on Group->Maint and again click on group insert... when i mention here the group name and number range for that group and say save the system in accepting but when view all the groups, i do not find this new group created by me.
How do i view the newly created group, is there any other steps to be followed? please advice.
regards,
radhakrishna

Hi:
It's a little late for this post but it is still important to record.
When you try to create a group in KONK transaction, the system doesn't show the new group.
This is because there are a inconsistences in the old groups.
You must execute RSSNR0T1 program to solve the problem.
Greetings
Marco

Maintain number range object for notification (IW20)

Dear All,
Need help. Is there any configuration to "Define Number Range" for Notification Types.
I'm using SAP R/3 4.7
While using SPRO, the path is:
Plant Maintenance and Customer Service -> Maintenance and Service Processing -> Maintenance and Service Notification -> Notification Types -> Define Number Ranges
Then execute, click Group, select "PM Notofication", then click change. In my system the status of menu Edit -> Insert Interval is disabled. Is there any configuration to turn on this "Insert Interval" option?
Many thanks in advance

dear ian
whatever procedure you followed is almost right,after selecting the PM notification don't press the change button , instead of that select PM notification and select <b>Interval</b> in the menu bar and <b>maintain</b> .then you can maintain the number ranges
regards
thyagarajan

Re : Maintain number range interval "" for quants

Similar Messages

Maybe you are looking for