Re:Method for extracting all hyperlinks and hypertext available in html pag

i want to extrct all the hyperlinks and hypertext available in html page which is displayed in a JEditorPane. i have done this using reg.expression and it is working 90% correctly but the problem occurs when a image is a hyperlink or span tag is used . so i want to know if there is any other method available to extract these things ...
i will be higly thankful to u !!!!!
with regards,
neetigya

http://www.exampledepot.com/egs/javax.swing.text.html/pkg.html

Similar Messages

  • Adobe Master Collection 5.5,  method of extracting all the presets, settings, etc. from every progra

    Is there an automatic method of extracting all the presets, settings, etc. from every program in the Adobe Master Collection 5.5? 
    I am about to regenerate my Operating System Partitions  from scratch & do not want to go through setting up each & every program in the master collection by hand.

    Adobe does have some pages documenting where it keeps preference et. al. files.  For example, this one for Photoshop CS5:
    http://helpx.adobe.com/photoshop/kb/preference-file-functions-names-locations.html
    I do know that overlaying the contents of the Adobe Photoshop CS5 Settings folder does restore most of the preferences.  The Color Settings are in a file called Color Settings.csf in another folder (depending on OS).  What I don't know is whether there are paths in those files that will differ depending on how you reinstall your system.
    You'll want to reinstall all your plug-ins again, much the same as when you reinstall Photoshop.  But you can make a copy of your Plug-ins subfolders from your 32 and 64 bit Photoshop installation areas just for good measure, to make sure you don't forget some of them.
    As for other programs in the suite...  You'll have to look for that info separately.
    -Noel

  • No i'm using iPhone 4 16GB. i want to know how long does it take for "Erase All Content and Settings"?does it affects to iPhone's hardware? and if i want to restore my software in iPhone back, how i can do it?

    no i'm using iPhone 4 16GB. i want to know how long does it take for "Erase All Content and Settings"?does it affects to iPhone's hardware? and if i want to restore my software in iPhone back, how i can do it?

    it takes hours
    it does not damage or wear out hardware
    and you can restore any backup afterwards as yo see fit

  • Query for getting all function and procedure inside the packages

    hi All
    Please provide me Query for getting all function and procedure inside the packages
    thanks

    As Todd said, you can use user_arguments data dictionary or you can join user_objects and user_procedures like below to get the name of the packaged function and procedure names.
    If you are looking for the packaged procedures and functions source then use user_source data dictionary
    select a.object_name,a.procedure_name from user_procedures a,
                  user_objects b
    where a.object_name is not null
    and a.procedure_name is not null
    and b.object_type='PACKAGE'        
    and a.object_name=b.object_name

  • When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

    When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

    Hello Gemese,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning audio issues:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

    I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

    Up the top where the three buttons are (red yellow green) are three images. Click on the third image that looks like a notepad (not the first which is a library book), and that should get rid of 'Notes'. To read using two pages make the window bigger.

  • Would like to create a script for list all elements and structure of an indesign document

    Hello everybody,
    I'm a very beginner in indesign scripting.
    I would like to create a script in order to list all elements and the inner structure of a n indesign document.
    The aim for me is to understand how elements are sorted and arranged into indesign, and be able to find an specific element by its item name.
    The output document could be an xml or txt document with a treeview structure.
    I would like have a rough idea of which kind of javascript code I should use for that.
    Thanks for answers.

    Hi Ossydoc,
    You can use Muse to create such a website. All you need to do is, create links in Muse for the sermons and select  " link to File " in the hyperlink option and link to those Mp3 files.
    Please refer to this screenshot :- http://prntscr.com/4xvdup
    Now, when you publish your site,  Muse would automatically upload those files onto the server and the users would then be able to listen as well as download those sermons using the links on your site.
    Hope this helps
    Regards,
    Rohit Nair 

  • Steps and methods to extract general ledger and special ledger

    Hi all:
         could you please tell me the method and steps about  how to extract general ledger and special ledger?
        Thank you very much!!!

    Hi Sony,
              Search in forums....
    Thanks,
    Vijay.

  • UCM API Methods for PDF Water Marking and Time stamping ???

    hi,
    i am working on project, the requirment is we need to migrate from DMS (DIGI SAFE) To UCM.
    here we need to approch through API, it should not through tool based functionality. document should be water marked and time stamped when we retrived the document through CIS.
    is there ant UCM API's for water mark and time stamp ??? please provide the methods for it. is there any API mehtods for Document versioing ??
    i am presently working windows 7 OS ? i am trying to install UCM 10gR3 in Windows 7 OS, will it support for UCM ??
    any help would be apprciated.
    Regards,
    YT

    Hi,
    There are services in Content Server that will allow you to create revisions of existing items. For example, CHECKIN_UNIVERSAL service will check in a new revision of an item if that Content ID already exists. You can also checkout a document if needed using the CHECKOUT service. Please refer to the services reference guide for more details (http://download.oracle.com/docs/cd/E14571_01/doc.1111/e11011/toc.htm).
    Regarding conversion and watermarking...
    You don't have to call a service to convert or watermark a document. These features have to be configured on the server. If you configure the content server to convert Word documents to PDF, then whenever a Word document is checked in, the content server will automatically convert it to PDF. In addition, if you have PDFWatermarking enabled and configured, watermarks will be applied automatically as well. All you have to do is ensure the product is configured correctly for the formats you want, and then check in the document. When you retrieve a document (using the GET_FILE service for example), you can ask for the PDF version by passing additional parameters.
    Please review the Application Administrators Guide (http://download.oracle.com/docs/cd/E14571_01/doc.1111/e10978/toc.htm) for info on enabling and configuring PDF Watermarking.
    The doc links referenced above are for UCM 11g. The same docs are available for 10gR3 at http://download.oracle.com/docs/cd/E10316_01/ouc.htm.
    --Vijay                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Best method for PLAY ALL

    I've used a couple methods for a PLAY ALL and wonder if anyone has comments on which is preferable. This will be for a glass-mastered SD DVD - an extra feature with an audio disc - and with 5.1 Dolby audio on the DVD.
    On this one we're using multiple tracks and scripting to play each track successively as part of a PLAY ALL, or each track separately from a chapter menu.
    Previously we've used one main track, and then played chapters via stories.

    Depends on the project. But stories will usually play a bit quicker (less pause) since they are all on the same track (if they are on different tracks the playback gets kicked to a different part of the DVD which slows things down), and scripts sometimes are a little less reliable than stories. Found that more on older players, but once in awhile DVD SP scripting can behave strangely. I think most of the "gotchas" can be worked around.
    Some others around here prefer scripts more than stories and do not like setting up tracks to have stories. I am not sure there is a perfect answer because each probably have the pluses and minuses, but I usually go with stories when I can, even though I find scripting alot more fun

  • Best Method for transferring projects back and fourth

    Hello. I will soon be purchasing an iMac for home use and would like to get some advice on project transfer. I will be doing a lot of video editing back and fourth between the office and home. What is the best method for doing this? Where can i locate the files to make sure that I have everything and wont be missing anything when I bring it home, etc. Thanks for any advice!
    Brandon

    Use a (Firewire 800 or faster) external HD to keep your media, events and projects on.
    You can then take the drive to work with you and back home. Use FCP X to transfer (or create) the event and projects on this drive and both macs will recognise it.
    The drive must be formatted Mac OS Extended (journaled is not important for video drives).
    Andy

  • FM for  display all capitals and initail letter capital and remain small

    Hi experts
    My requirement is display amounts all  CAPITALS and Initial Letter is capital and remaining letters are small
    Any funtional modules is there is achieve this functionality.
    thanks
    umakanth

    Hi,
    1. TRANSLATE c TO UPPER CASE.
    2. TRANSLATE c TO LOWER CASE.
    3. TRANSLATE c USING c1.
    4. TRANSLATE c ...FROM CODE PAGE g1...     TO CODE PAGE g2.
    5. TRANSLATE f ...FROM NUMBER FORMAT n1... TO NUMBER FORMAT n2.
    In se38  type translate and press f1, you will get with examples.
    Thanks,
    Senthil

  • Select entities in a swf file and pass back to html page

    Hi,
    I am new to flash. I got a dwg file converted into swf file. Now I want this swf file to embed in html page. No issue with that.
    The tricky part for me is to let the user select the entites of the file such as line/circle as one might select in autocad. After entity selection the swf file (by any means) pass the  selected entity information back to the html page ( to the javascript function).
    Is this feasible?
    I have no clue Please give direction.

    Thanks Tim.
    I could solve the problem using javascript.
    I have used the following javascript.
    <script>
    function test(){
    var radioLength = document.wwv_flow.p_v01.length;
    var retVal = '';
    if(radioLength == undefined)
              if(document.wwv_flow.p_v01.checked)
                   retVal = document.wwv_flow.p_v01.value;
              else
                   return "";
         for(var i = 0; i < radioLength; i++) {
              if(document.wwv_flow.p_v01.checked) {
                   retVal = retVal + ';' +document.wwv_flow.p_v01[i].value;
    retVal = retVal.substring(1, retVal.length);
    opener.document.getElementById('P1_TEST').value = retVal;
    window.close();
    </script>
    Now the problem is solved!!
    Thanks,
    Archana

  • Service Manager 2012 R2 Looking for the SDK method for Select All management packs OMCI Connector

    Hi all,
    I'm working through a script that updates the OpsMgr CI connector's MP sync list after a MP import. What I want to do is a Select All to sync the OpsMgr MP's I just imported into Service Manager. Just like checking the Select All
    box after refreshing the connector in the GUI.
    I have been through the cmdlets and looked at the assemblies in VS. I can't find the method that does this.
    I found IsNullPropertySkipped under
    Microsoft.EnterpriseManagement.ServiceManager.Connectors.OpsMgr but that's it
    And nothing in here
    Microsoft.EnterpriseManagement.ServiceManager.Sdk.Connectors.Connector
    Must be missing it, and am not having much luck with TechNet.
    Thanks much–Drew

    I'm afraid you won't find a quick'n'easy solution for this. I'll start out by saying I don't know if Powershell has any cmdlets for this..but I know you can use the .NET SDK via powershell to do whatever you need to do. So my post focuses on the SDK/C#. You
    should be able to adapt it in Powershell.
    The function you want to replicate (check-all) is unique to the Operations Manager CI connector implementation and, as such, my post below may sound a bit overwhelming.
    Let me start by describing where an OM CI connector's selected management packs are stored. They're stored in the connector's workflow rule (specifically, in its WriteAction module).  Take a look at the ServiceManager.LinkingFramework.Configuration
    management pack where all OM CI connector rules are stored. Look for a rule that starts with "OMConnector." (the dot will be followed by some random string of text and "_SyncRule"). Take a look at the <WriteAction> and you'll see an <MPList>
    node that contains a bunch of <MPInfo> nodes. Each <MPInfo> node represents a management pack that was selected in the OM CI Connector wizard.
    So, if I understand what you're trying to do, when you import a new MP into Service Manager, you want to add that MP to the OM CI connector's sync list. First; if that MP doesn't exist in OpsMgr, there isn't much point to adding it to the sync list, so I'll
    assume you want to add MPs to the sync list that also exist in OpsMgr). Second; there may be other constraints on what MPs you can actually choose in that OM CI wizard and it would be wise to respect those constraints in your own solution. In any case, you'll
    have to modify the OM CI connector's rule's write action. There are a couple approaches you can try.
    You can try using Microsoft's helper classes that were built for OM CI Connectors (check out the OpsMgrConnectorHelper class and related classes in the Microsoft.EnterpriseManagement.ServiceManager.OpsMgrConnectorUtils.dll.
    Also check out the OpsMgr connector wizard classes in the Microsoft.EnterpriseManagement.ServiceManager.UI.Administration.dll).
    The other possible approach is to modify the connector's rule directly using the SDK's ManagementPackRule and ManagementPackWriteActionModule classes. You can easily get your OM CI connector's rule using the management pack's "GetRule" method (or the EnterpriseManagementGroup's
    Monitoring.GetRule method). The management pack rule has a "WriteActionCollection" which is a collection of ManagementPackWriteActionModule objects. There should be only one ManagementPackWriteActionModule in an OM CI rule's write action collection.
    This object has a "Configuration" property..it contains a giant block of XML that holds all of the <MPInfo> nodes I mentioned earlier. So, you can modify that block of XML, then write the changes back to the management pack using the management pack's
    AcceptChanges() method. Here's the basic structure: 
    ManagementPack mpLinkingFramework = emg.ManagementPacks.GetManagementPack(new Guid("50DAAF82-06CE-CACB-8CF5-3950AEBAE0B0")); //ServiceManager.LinkingFramework.Configuration
    ManagementPackRule mpr = mpLinkingFramework.GetRule("<my connector's rule's name>");
    ManagementPackWriteActionModule mpwam = mpr.WriteActionCollection[0];
    String myConfig = mpwam.Configuration; //This is the XML block you want to update
    myConfig = "<a modified configuration with my new <MPInfo> node>";
    mpwam.Configuration = myConfig;
    mpLinkingFramework.AcceptChanges();
    Please note I haven't personally tried modifying an OM CI connector's rule using this method and I can't promise it will work..you'll definitely want to try it in a test environment first. But I can say I have modified my own connectors (and other write actions)
    using this technique and it works fine. I just can't say for sure how it might affect an OM CI connector since I haven't tried it myself.
    Though my post here is definitely _not_ a solution, hopefully it will give you some guidance on how you might approach your solution.
    Maybe someone else here has personally used the OM CI connector classes and can give you some better insight.

  • Report for extracting the actual and planned cost from service orders

    HI all
    we are creating a report in BI for Module - Customer service . LIke , the report is all about how many complaints created in the system and how many completed technically and what is the cost involved for each complaint .
    Like we want the comparision between the planned cost and the actual cost .
    Now to give the logic to the BI Team for planned cost and actual cost , please suggest the flow of logic or table flow to arrive the planned and actual cost
    thanks in advance

    Hi Marthand,
    I am not sure which datasource your are using. In this case, you can use the 0VALUETYPE to differencitae between th eplan and actuals. Normally Plan which is budget will have value 050 and for actuals will have 010. For costs, you will have one key figure and at the reporting level, you will have the costs restricted by the value type for plan and actual to make comparisons.
    Hope this helps.
    Regards,
    Srinivas

Maybe you are looking for