Re:Middleware settings

Hi All,
can you please suggest me what are all the documents i need to have a look to do the middleware settings in SAP CRM.to replicate BP,Products,and Transactional Data between SAP ECC and CRM 2007 system.
I never done the middleware settings before but i got the opportunity to do,so please suggest me the right documents to do the middleware settings and to replicate the data between these two systems.
I am bit confused with the documents like CR500 and other.i am not sure where to start.
your help would be appreciated........
I look forward to your reply.
Thanks,
Ramesh

Hello Ramesh,
If the systems are already integrated then go ahead with downloading the master data like ORG model,
BP,Products ,Pricing details from R/3.Once this is done go ahed with downloading the transaction data.
In order to download products and BP please refer to my previous reply.
Let me know if you face any issue.
I do not think there is a direct link where you can find all such details at one such.
You can refer to below link for products and search for other details.
http://help.sap.com/saphelp_crm50/helpdata/en/91/d8fc377cb5be5ae10000009b38f842/frameset.htm
Let me know if you face any issues while downloading BP or Products.
Hope this helps!
Regards,
Shanthala Kudva.

Similar Messages

Middleware Settings - Duplicate entries in the Table TCURC

Hi Experts,
I am doing middleware settings for integrating SAP CRM 5.0 with SAP R/3 4.7.
Before replicating the customizing objects, i found duplicate entries for ISO Codes in the table TCURC (Field name-ISOCD).
Following are those entries
MANDT     WAERS     ISOCD     ALTWR     GDATU     XPRIMARY     LTEXT     KTEXT
949     CFP       XPF       953       00.00.0000          French Franc (Pacific Islands)     Fr. Frank (Pac)
949     CNY       CNY       156       00.00.0000     X     Chinese Renminbi     Renminbi
949     DEM       DEM       280       00.00.0000     X     German Mark     German Mark
949     DEM3      DEM       280       00.00.0000          (Internal) German Mark (3 dec.places)     (Int.) DEM 3 DP
949     RMB       CNY       156       00.00.0000          Chinese Yuan Renminbi     Yuan Renminbi
949     USD       USD       840       00.00.0000     X     United States Dollar     US Dollar
949     USDN      USD       840       00.00.0000          (Internal) United States Dollar (5 Dec.)     US Dollar
949     XPF       XPF       953       00.00.0000     X     CFP Franc     Franc
Duplicate entries are in the third column.
Please kindly let me know what is the impact and what should i do now.
Points will be rewarded for the helpful answers.
Thanks in advance
Nadh.R

Hi Murali,
Thanks for your reply.
But i didnt find anything related to the issue in that note.
Do you have any other solution.
Thanks
Nadh.

Contact person Number range in ERP and CRM - Middleware settings

Dear SDN team,
We have currently integrated SAP CRM 5.2 and SAP R/3 4.6 c using Middleware .
The contact persons are maintained in SAP R/3 system and also downloaded into CRM system . Currently the Number range is different in both the systems
Going forward, we can create and maintain Contact Person data in CRM only. But we have an issue with the Number ranges allocation in ERP system.
Our Questions are :
1) Can we maintain a external number range for Contact Persons in ERP system ? If yes , how is this possible ? because Contact person is not a standard Account group in ERP and we cannot maintain PIDE settings for Contact persons .
2) What is the best solution to maintain Contact persons between ERP and CRM with active Middleware settings.
A Good answer will get maximum points.
Regards
Ritvij

Dear Ritvij,
Am no sure how best I can answer but attempting:
Basically the contact persons in the R/3 system when are transfered to a CRM, the system generates the number from the number range with internal number assignment of the standard grouping. Hence, no PIDE settings involved.
Now, maintaining the contact person in CRM and to determine the number range for contact persons differently, you got to go for enhancement. You can look at the note 564538 which might give you some clues as to what enhancements are required.
thanks
Ravi

Middleware settings to map CRM Z table fields with ECC material master flds

Hi,
We want to create a Z table in CRM,this table willl have 2 fields External Material Group and Old Material Number.These 2 fields in CRM table are corresponding to same material master (MM03) fields in ECC.The changes to these fields done in ECC material master should be updated in CRM Z table.
I want to understand the middleware settings I need to do in order to map the ECC and CRM fields.
Thanks in advance for your help
Swapnil

Hi Swapnil,
I am new to Middleware, I am also having same requirement , can you please tell me the process how you resolved this thread.
Thanks in advance,
Regards,
Santosh.

Hi, middleware settings

Hi,
What are the configuration & settings I need to do during the initial download in R/3 as well as in CRM system. Please give me the step by step procedure.
Thank you.
Sekhar..

Hi,
For connectivity settings:
1. SCC4: Define client administration (SAP ERP)
2. BD54: Define logical system (SAP ERP)
3. SCC4: Assign logical system to client(SAP ERP)
4. SU01: Create RFC user(SAP ERP)
5. BD54: Define logical system(SAP CRM)
6. SCC4: Assign logical system to client(SAP CRM)
7. SU01: Create RFC user(SAP CRM)
CRM Connectivity
1. Create logical System for SAP CRM(SAP ERP)
2. SM59: Connect SAP CRM(SAP ERP)
Check table CRMCONSUM (SAP ERP) : Look for entry CRM - it should be checked
#Maintain table CRMRFCPAR (SAP ERP): entries you can check from config guide
#Maintain Table CRMPAROLTP (SAP ERP): Use Transaction SM30
Choose Maintain and Choose New Entries
Field name                    User action and values
Parameter Name               CRM_RELEASE
Param.Value                    700
#Activate event control (SAP ERP): Use Transaction SM30
Enter Table name TBE11
Choose Maintain
Set the applications NDI (New Dimension Integration) to status Active by checking the check box in the column A.
#Define logical System for SAP ERP(SAP CRM): BD54
#Connect SAP ERP (SAP CRM) : SM59
#Create site for OLTP(SAP CRM): SMOEAC
Register Queues (SAP CRM): SMQR >>> CSA* and R3A*
Set up error handler(SAP CRM) (optional): IMG>>CRM Middleware>>Message Flow Setup>>Assign error actions to messages
Middleware Genearation:
1. Activate status reporting: SMWP
2. Specify the Industry: IMG>>CRM Middleware>>Genearting Ind Sp Object>>Select Industry
3. Specify the Application: IMG>>CRM Middleware>>Genearting Ind Sp Object>>Select Application
4. SMOGTOTAL: Generating required objects
5. GENSTATUS: Check status of generation job
6.Check generation status of objects: SMWP
7. Generate industry specific objects: SMOGIND
8.Check status of generation job: GENSTATUS
9.Check generation status of industry specific objects: SMWP
10. Generating Filter Modules in client copies: GNRWB
11. Reorganizing Middleware Data: SMWP

Middleware settings after the Upgrade

Hi Gurus
After the system upgrade is completed, do we need to set the Middleware parameters all over again. What I mean is that do I again need to check the SMOEAC settings, generate the Middleware Objects using SMOGGEN or execute SMOGTOTAL. Or do we need to check the Middleware tables yet again and make any changes to them.
I understand that we need to execute the report COM_PRODUCT_UPGRADE.
Regards
Raj

Hi Raj,
As mentioned in note 826092:
=========
After upgrade, call transaction SE38 and execute the report. A transport
request is created which you need to transport in all subsequent
systems. After the import of the transport request, you must run report
COM_PRODUCT_UPGRADE in the respective subsequent systems.
=========
Hope this helps.
Regards,
Ivy

Middleware settings after upgrade

Hi All,
We have upgraded our CRM system from EHP1 to EHP3.
What are the settings/configurations we need to do after upgrade. I read CR500 and other middleware documents online already.
Please provide me the checklist.
Regards,
Nagaraju

Any updates.. Please provide the details

R/3 IS-U to CRM : confusion in middleware settings

Hi guys
We are Transferring Business Partner (BUPA_MAIN) data fro R/3 is-u system to CRM System(NO CDB), I did the settings as per the B09 - CRM customizing Replication, apart from this I did the settings as per the CRM Setup and Load guide but I came to know that (Through SDN only, Thanks for SDN) these settings are relevant to Customer_main only, In this regard I am very ambiguous what customizations to use in order to download BUPA_MAIN from R/3 is-u System .
is it required to create R&Rqueues and other queues too.
is it required to customize PIDE Transaction?
Pls clear my ambiguity, and what customizations to be do in sequence
Thanks in advance
Warm regards
Rajasekhar

Hi all
Thanks for reply, when I am checking through monitoring cockpit
in the Runtime Information->Data Exchange using qrfc queues->qin shcedulerwas showing Unregistered inbound queues local client as 2 entries with allow signal
I maintained the below entires in that CSA* and R3A* but the destination with logon data is initial is it required to maintain any value in that
in Adapter Status Information ->parameters for R/3 back end short text showing that node value not found
I maintained the r/3 sites and subscriptions in crm as per the document
Looking for valueable help
Warm regards
Rajasekhar

Middleware Settings for Product Categories

Hi,
We are using the CRM middleware to replicate the Product Categories.
In our case the R/3 backend Mat Groups are defined using the two fields.
1. Matl grp descr.
2. mat.grp desc. 2
The first one is a general one and the second field is more imporatant for the users in the search.
But from middleware initial downloads we are only getting the first Description field.
could some one walk me thru the steps to bring in the Second Mat grp desc. also.
Regards
Manoj A.

Hi Manoj,
This customizing option only lets you which description (short or long) to use in SRM.
The concatenation of both is not possible via the standard.
What you could try is to change the mapping module assigned to object DNL_CUST_PROD1 (COM_PRODUCT_PRDCT_PROD1_SAVE) by a specific one, where you can merge both descriptions.
It is a rather simple function module that you could modify (see FORM t023t).
Rgds
Christophe

Middleware- Taking long time for generation of Runtime objects- SMOGTOTAL

Hi Experts,
I am doing middleware settings for connecting CRM 2007 with R/3 4.7.
When i am generating all the required objects ( Replication objects, publications....) using the transaction code SMOGTOTAL, system is taking very long time for generating the objects. Generally it takes 4 to 6 hours but in our case it has already took more than 36 hours and still its running.
Can anybody tell me what i need to do to make the generation process faster.
Regards
Nadh

What I read in the best practice:
It is not required for a new installation.
Typically this activity has already been executed during the system installation or upgrade.
Use transaction SMOGLASTLOG to check if an initial generation has already been executed. In this case you can skip this activity.
I checked transaction SMOGLASTLOG, and in our case the initial generation was not yet executed. I also couldn't continue with the next steps.
That's why I started up the job, it is finally finished after 104 hours..
Thanks for your fast reply.
Jasper.

SRM 7.0 - CRM middleware settigns for material replication

Hello SRM Guru's
Can you please provide me detail step by step process of CRM middleware settings for material replication from ECC 6.0 SRM 7.0?
Thanks.
Regards,
Magesh.

Hi,
Configuration Guides are available in SAP Solution Manager Server. Downloaded offline version is also available in SAP Service Marketplace. http://service.sap.com/srm-inst
Please check a good blog by Marcin Gajewski. /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
SDN has search functions. You can find solutions for your issue.
Regards,
Masa

Custom middleware

Hi experts,
we are working on custom middleware trying for a z table replication from R/3 to CRM. we have the bdoc populated with data and even updating the database. But we could still see the load object in status "RUNNING" (transaction R3AM1). Also, we are not able to find any queues in R3 as well as in CRM. We are done with all the middleware settings. Is there any thing need to be done still? Please help us on this issue
Points will be awarded liberally,
thanks in advance
RK

Hi RK,
When you do a load at the end of it we send the end of block so that system knows that the load is finished. May be this is missing in your custom development. Please check are you handling this in your development ?
Reward points if it helps!!
Thanks,
Vikash.

Equipment replication with new filter settings

Hi all,
ECC-CRM middleware settings are already in place. I then added status of the equipment as a new filter (Table-JEST, Field-STAT) as two lines (one for system status and one for user status) in R3AC1.
Delta replication is happening fine.
When i try to do initial load, no equipment is replciated for the filter settings maintained.
In R3AM1, i see the block size as zero.
Can someone help me on this?
Regards,
Gowri

Hi Gowri,
Have you found any solution for this? We are also having same requirement, if you found any solution kindly share.
R3AC1 Question : How to add unallowed / non-standard filter settings?
I have implemented this logic but CRM_EQUI_DMBDOC is processing successfully. I need to restrict the equipment object based on status. please share if you got any solution.
Thanks,
Vijay

Middleware setting for sales order documents replication crm to ECC

Hi,
Please help me on the following query:
what kind of middleware settings should done to get transaction documents(sales order(TA) and contracts) tranferred from SAP CRM to SAP ECC. Please provide tcode and navigate for settings.
Thansk and Regards,
Venkat

Hi,
In the below Link you can find building blocks
http://help.sap.com/bp_crmv12007/CRM_DE/BBLibrary/HTML/BBLibrary.htm
First of all you need to do settings in middleware (For all the settings, you refer to the Building Block guide C71)
Then you need to do a series of settings as follows:
Ensure that both the system are synchronized interms of Transaction types, Item categories, Item cat determinations and proper number ranges.
Go to SMOEAC and subscribe publication BUS_TRANS_MSG to R/3 Site
If you want to activate inter-dependent changes, make an entry in R3AC6 Tcode, with key R3A_SALES, param 1 as INT_CHANGE_ORDER, param 2 as Transaction type and scenario as A.
Similary in ECC system, make an entry in CRMPAROLTP table with key CRM_Scenario, INT_CHANGE_ORDER, Transaction Type and A.
I understand that this doesnot explain you in a detailed way. For more info search on help.sap.com
Regards,
Raghu

Settings for delivery in erp from crm

Hi
Can any one explain what basic settings to be done to carry out delivery in erp when sales order is created in crm

Hi
Please check the following:-
1. The transaction type you create in ECC and CRM should be in sync. I mean it should have the same nomenclature is used in both the systems. Say Z001.
2. The item category type you create in ECC and CRM should be in sync. I mean it should have the same nomenclature is used in both the systems. Say ZTAN.
3. Availability check settings in ITEM CATEGORY which will be defined in SAP CRM. Define ATP Profile > Assign this ATP profile in the ITEM CATEGORY in SAP CRM.
4. Please follow the SPRO settings in the following path in SAP CRM system:-
SPRO > Customer Relationship Management > Basic Funstions > Availability Check Using SAP ECC >
Follow the below steps in the corresponding SAP ECC system:-
1.Start transaction FIBF in SAP ECC, then go to menu Settings -> Identification -> SAP Applications.
2.In table BTE Application Indicator, add the application CRMATP and set it to active.
Note:- You must be aware that the DELIVERY is created once the SALES ORDER is replicated to ECC from CRM. Above settings are required and should be done carefully. Please take help of an middleware expert to do the middleware settings.
Hope this will help.
Regards

Re:Middleware settings

Similar Messages

Maybe you are looking for