Re: Mobilink Network Connection manager crashes on opening

After replacing the machine (Portege R500-121) and restored the image of the previous machine, the Mobilink software crashes on opening with a Error ID 1000 (translation): exception code 0xc0000005, offset 0x00001bde, process id 0x13a8.
Uninstalled and reinstalled several times.
Any idea on how to solve it?
Thanks,

Hi!
Can you explain what do you man with replacing the machine, please?
The Mobilink software is not known to me but check the manufactures website for an update. Maybe this could solve the problem.
Make also sure that you have all Service Packs and Hotfixes for Windows installed.

Similar Messages

Mouse moves by itself down to dock (even when physically unplugged and no network connection) and starts clicking open the applications in a row! Always does the same thing every few hours. What is happening?

Craziest thing ever.
I cannot find this happening to anyone anywhere online, but this is seriously the weirdest thing I've seen in 20 years. I've done everything I can think of to try and prevent this, EXCEPT for two things... one of which is being tested right now: login as different user and reinstall the OS. For the past 30 minutes, I've left it logged in as another user to see if it happens again.
Things I've tried:
- New mouse
- New keyboard
- No mouse or keyboard
- Repair permissions
- Reset PRAM
- Turn off any extraneous applications that launch at login
- Firewall blocks / Stealth mode
- Remote management OFF
- No network connection at all
No matter what we tried above, it still happens. Again, I am currently logged in as a completely different user to see if it happens here.
If you were to see it in action, it would freak you out. The mouse literally just starts jumping around on the dock opening applications. We have not found a pattern for when it actually happens. It just happens.
Any ideas, friends of the forums? Thank you in advance.

Thank you so much BDAQUA and RRFS.
I can't confirm it, but I think I just figured out what is causing the issue. This is a school computer, and there is a SMART Board hooked up to the Mac via USB. Thanks to BDAqua's post, I realized the "ghost" vanished and never came back when the SMART Tools application was closed. Through all of this troubleshooting, I failed to realize a GIANT mouse was still attached to the computer.
I have not returned to the classroom to confirm any of this, but I would bet that either something is on the SMART Board causing the "touch" to occur or the software just needs to be reinstalled. Again, I've confirmed nothing, but it sounds like it MUST be related to the touch screen SMART Board.
Thank you all who gave this any thought. I apologize for not physically removing all peripherals... I hope this works. I'll be back there tomorrow. If you don't hear from me again, that was definitely the issue.
Thanks again!

Remote Desktop Connection Manager can only open 6 sessions at a time on Server 2012

I am only able to open, and view thumbnails, for a maximum of 6 RDP sessions on my Server 2012 box at a time in Remote Desktop Connection Manager (RDCM). If I add more sessions I just get a variety of connection errors for the additional sessions. If I activate
a 7th session one of the existing 6 sessions goes off-line with a connection error message. Sometimes the error says 3334, sometimes the error says 0x8345000E, and sometimes it just says there is a connection error.
I have checked Group Policy on the server to ensure I don't have any settings restricting the number of RDP sessions.
In fact, I will often have 30 or 40 RDP simultaneous sessions opened, I am just not able to view them all in RDCM. I have seen reviews of RDCM with screenshots showing dozens of thumbnails so it seems to be something that's possible to do.
Are there any settings I should make on the server to allow RDCM to connect to more than 6 simultaneous RDP sessions?
Just to be clear, all these RDP sessions are running on the same server. Also, I am just using the trial license for Server 2012 and Remote Desktop Services right now. I don't think that should have an impact, but I wanted to be thorough.

Thanks Jakub for "corflags" info.
Unfortunatelly it doesn't work because running mRemoteNG.exe process in 64bit can't load MSTSC ActiveX component (referenced assemblies) because original files were assembled from 32bit dll [mstscax.dll]?
Error message when making RDP connection:
Could not load file or assembly 'Interop.MSTSCLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. An attempt was made to load a program with an incorrect format.
I was able to create new AxInterop.MSTSCLib.dll and Interop.MSTSCLib.dll assemblies from 64bit dll version and now it works with "AnyCPU":-)
http://www.filedropper.com/axinteropmstsclib-mremoteng
Using AxImp.exe and TlbImp.exe didn't worked for me because it creates assemblies in wrong namespace "MSTSCLib" instead of "Interop.MSTSCLib" (AxImp.exe) and TlbImp.exe for changing namespace generated many "marshaled errors"
so final .dll wasn't working.
Adding MSTSCAX.dll reference in Visual Studio directly created correct and functional assemblies. Who don't know how to create 64bit compatible assemblies or don't have Visual Studio, feel free to check linked file.
Hope it helps
P.S. Sorry for possible technical misinterpretation, I am not programmer so creating new assemblies was trial-error process...

Desktop Manager crashes when opening backup file with critical information

I was on a trip and a family member triggered my Bold's secure wipe (wrong password 10 times). I had made a back-up just before the trip and it contains very critical information. When I try to do a restore with Desktop Manager (4.7.0.32, same version as used to make the backup), it crashes as soon as I select the backup file. I tried opening the .ipd backup file from Advanced instead, with the handset disconnected, with the same crash result: "An unhandled win32 exception has occured in DesktopMgr.exe [4340]." where the number in the brackets is different every time.
Please help me, I will likely lose my job if I cannot restore the information from this backup!
Edit: I tried reinstalling the Desktop Manager, and same thing. I even tried 4.6 instead of 4.7 and again, same thing.
Message Edited by Prune on 12-31-2008 05:03 AM

Connected to the USB, can you do a Restore > Advanced and select the critical databases?
Are you connected to the PC via USB to a rear PC USB port--not a USB hub, or front monitor port?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Running Firefox 4.0 on Windows 7 crashes when opening - no solutions to date work and I cannot uninstall it.

I've tried going through all the solutions I can find including trying unlock my profile (parent.lock), or create a new profile (profile manager crashes too), opening it in safe mode (it won't - still crashes), running it as administrator (also crashes) and I cannot uninstall it (that crashes too). The Crash Reporter/Manager also crashes and locks up so I cannot submit this issue. I'm at a loss.

Hit CTRL+SHIFT+ESC to bring up Windows Task Manager, go to the Processes tab and look for '''firefox.exe''' If you find it, right click it and choose Kill Process.
What I suggest next is to perform a clean installation as follows:
* Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0] and download a fresh installation file to the desktop. In this particular case, I'd recommend downloading the file with either IE8 or 9. Choose to save the file to your desktop when you see the prompt.
* Then go to Add/Remove Programs, scroll down to Mozilla Firefox and remove it, choosing to keep your bookmarks, customizations etc., (don't checkmark the box).
* Then reboot and delete the folder called Mozilla Firefox at this location: C:\Program Files\Mozilla Firefox
* Finally run the installation file you downloaded to the desktop earlier.
Your bookmarks, customizations etc., will be retained in a separate folder and will become available again once the reinstallation completes.
If you prefer to go back to the previous secure version which is 3.6.16, use this link instead: [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.16] Otherwise the procedure is the same.

Connection Manager - Expression ConnectionString

Hi
I have been unable to find the answer to this question and would appreciate any advice.
I have taken over a number of SSIS packages and wonder if the existing practise is fairly normal as I have not seen it done quite like this before.
I need to create/modify the packages for changes to the existing import files or for new import files.
Each package imports a number of different text files with different columns, each input file has it’s own Connection Manager however all the Connection Managers share the same Expression ConnectionString and DelayValidation is
False.
When looking at the Connection Manager I can set the Filename to one of the corresponding input files and preview the data etc., however once I open the Flat File Source Component I can no longer preview the data as the default value for the variable in
the Expression Connection String is used which points to a file that is not there.
Should I
Just set DelayValidation to True
use separate variables for each Connection Manager (1 per input file format)
change the default value for the file in the variable to match the components I am looking at
something else
Thanks in advance
Shaun

I have just tried 1.
I thought this would be an option. However even with DelayValidation set to true in the Connection Manager when I open the Flat File Source component the default value for the variable in the Expression Connection String is used, whcih points to a file that
is not there.
Having read up on DealyValidation I thought that would help...
Trying 3 as I know that will work, however I still need to know how I should be doing this
Thanks again
Shaun

Creative Cloud losing network connection/deleting files

My team has been using Creative Cloud since June 2014. We work off of macs running OS Mavericks and use an internal server. For months now we have experienced errors mostly in InDesign where we lose our network connection, InDesign crashes, and our files either delete or revert back to the original version despite multiple saves. We have had network and server specialists in and have ruled out any internal connection issues. Could this be a Creative Cloud issue and are there any recommended fixes?

Quote from: NovJoe on 02-March-09, 23:10:05
Force your NIC to run at 100Mbps full duplex and see how it goes.
Check your router / switch ports as well as cables.
I will try 100 Mbps if it happens again. So far, it hasn't occurred after installing the driver supplied by MSI's Web site and not RealTek's Web site. The room temperatures even got warmer like 83F degrees.
As for router and switch, what am I checking for? Other computers didn't have any problems. As for cat5 cables, I already tried another one like I said in my original post.

NET8 CONNECTION MANAGER 설치와 설정방법

제품 : SQL*NET
작성날짜 : 2003-01-15
NET8 CONNECTION MANAGER 설치와 설정방법
=======================================
Purpose
Oracle Connection Manager(v3.0.x)의 설치와 설정 방법을
알아 보고 시작시켜 봅니다.
V3.0.x은 Oracle8 Enterprise Edition에 같이 들어 있으며
Oracle8의 일부는 아닙니다.
1. 설치 방법
2. 설정 방법
3. 시작 하기 (Windows NT)
Explanation
1. 설치 방법
다음 세가지의 실행 파일이 설치 됩니다.
CMGW, CMADMIN, CMCTL (Unix 와 VMS)
CMGW80, CMADM80, CMCTL80(desktop Oracle8에서)
CMGW, CMADMIN, CMCTL(desktop Oracle8i에서)
CMGW/CMGW80
이 것은 Connection Manager의 hub와 같은 역할을 하는
gateway process입니다.
CMGW의 기능은 다음과 같습니다.
- CMADMIN를 등록합니다.
- SQL*Net 2.x와 NET 8.x에서 오는 접속 요청에 대해 대기합니다.
기본적으로 1610 port를 사용합니다.
- NET 8.x listeners에 접속 요청을 발생 시킵니다.
- client와 server사이의 data를 전달합니다.
- CMCTL/CMCTL80에 의해 발생되는 요청에 응답합니다.
CMADMIN/CMADM80
Connection Manager의 모든 관리적인 문제들을 처리하는 multi-threaded
process입니다.
SQL*Net 2.x 와 NET 8.x clients들을 위해
Oracle Names Server에 있는 주소정보를 유지하는 기능을 합니다.
- CMGW/CMGW80 등록 작업을 합니다.
- local Oracle Names Server를 찾습니다.
- 하나이상의 db instance를 서비스하는 모든 listener들을 관리합니다.
- CMGW/CMGW80 와 listener에 대한 주소 정보를 등록합니다.
- 네트워크와 Names Server의 수정된 정보를 감시합니다.
- CMCTL/CMCTL80의 요청에 응답합니다.
CMGW, CMADMIN/CMGW80, 와 CMADM80 의 서로간의 정보전달은 IPC를 통해
이루어 집니다.
CMAN은 주기적으로 Names Server의 바뀐 정보를 cache에 반영합니다.
CMCTL/CMCTL80
CMADM/CMADM80 와 CMGW/CMGW80 를 관리하는 일을 합니다.
현재 제공되는 명령은 start, stop, status, 그리고 version 입니다.
CMCTL START [CMAN | CM | ADM]
이 명령은 Connection Manager 또는 그 구성요소를 시작 시킵니다.
- 인자가 없는 경우 또는 CMAN을 준 경우는 gateway 와
administration process를 시작시킵니다.
- CM 을 주면 gateway process 만 시작됩니다.
- ADM 을 주면 administration process 만 시작됩니다.
CMCTL STOP [CM]
Connection Manager process들을 중지 시킵니다.
- 인자가 없는 경우 또는 CM 을 준 경우 gateway 와
administration process 모두를 중지시킵니다.
gateway process가 중단될 경우 administration process는 자동으로
중단됩니다.
현재 진행중인 접속이 있는 경우 CMAN 는 중지될 수 없습니다.
CMCTL STATUS [CMAN | CM | ADM]
이 명령은 Connection Manager의 요소들의 상태를 보여줍니다.
- 인자가 없거나 CMAN이나 CM일 경우 gateway process의 상태를 보여 줍니다.
- ADM은 administration process의 상태를 보여 줍니다.
CMCTL VERSION
이 명령은 control utility의 버젼을 보여 줍니다.
CMGW/CMGW80 와 CMADM/CMADM80의 버젼은 status명령으로 볼 수 있습니다.
2. 설정 방법
client들은 tnsnames.ora 이나 Oracle Names Server 가 필요합니다.
Connection Manager는 cman.ora 가 필요하며 server는 init.ora에 MTS설정이
필요합니다.
client설정
tnsnames.ora파일의 예 입니다.
EXAMPLE=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=SERVER.US.ORACLE.COM)
(PORT=1521)
(CONNECT_DATA=
(SID=ORCL)
하나의 protocol로 Connection Manager를 사용하는 tnsnames.ora파일 예입니다.
EXAMPLE_CMAN=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=CMAN.US.ORACLE.COM)
(PORT=1610)
(ADDRESS=
(PROTOCOL=TCP)
(HOST=SERVER.US.ORACLE.COM)
(PORT=1521)
(CONNECT_DATA=
(SID=ORCL)
(SOURCE_ROUTE=YES)
ADDRESS_LIST가 path입니다.
첫번째 주소가 CMAN에 접속하는 정보이고, 두번째 주소가 서버에
접속할때 CMAN에 의해 사용되는 주소입니다.
필요하다면 ADDRESS_LIST 안에 여러개의 CMAN 의 주소를 설정할
수 있습니다. CMAN은 기본적으로 라우터처럼 동작합니다.
접속 요청을 다음 hop으로 지정합니다.
여러개의 protocol로 Connection Manager를 사용하는
tnsnames.ora파일 예입니다.
EXAMPLE_CMAN=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=
(PROTOCOL=SPX)
(SERVICE=CMAN)
(ADDRESS=
(PROTOCOL=TCP)
(HOST=SERVER.US.ORACLE.COM)
(PORT=1521)
(CONNECT_DATA=
(SID=ORCL)
(SOURCE_ROUTE=YES)
위의 예에서 CMAN에 접속하기 위해서 client는 SPX를 사용하고
server에 접속하기 위해서 CMAN은 TCP/IP를 사용하게 됩니다.
Oracle7에서 소개된 Oracle Multi-Protocol Interchange (MPI)과
같은 기능을 합니다.
만일 서버까지 가는데 한개 이상의 router가 있는 경우
SQL*Net 2.3에서 소개된 DESCRIPTION_LIST를 사용할 수 있습니다.
다음은 DESCRIPTION_LIST를 사용한 tnsnames.ora 파일의 예 입니다.
EXAMPLE_ROUTES=
(DESCRIPTION_LIST=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=CMAN1.US.ORACLE.COM)
(PORT=1610)
(ADDRESS=
(PROTOCOL=TCP)
(HOST=SERVER.US.ORACLE.COM)
(PORT=1521)
(CONNECT_DATA=
(SID=ORCL)
(SOURCE_ROUTE=YES)
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=CMAN2.US.ORACLE.COM)
(PORT=1610)
(ADDRESS=
(PROTOCOL=TCP)
(HOST=SERVER.US.ORACLE.COM)
(PORT=1521)
(CONNECT_DATA=
(SID=ORCL)
(SOURCE_ROUTE=YES)
만일 Oracle Names Server를 사용하면 Connection Manager는 자동으로
CMAN을 위한 주소를 Names Server에 있는 기존의 주소에 추가하게 됩니다.
SQLNET.ORA파일에 다음과 같은 parater를 설정할 수 있습니다.
USE_CMAN = [TRUE | FALSE]
- TRUE 라고 설정하면 CMAN이 무작위로 뽑은 간접적인 경로를 이용해
client를 접속시킵니다. ( 적어도 하나의 CMAN address가 있는
address list)
- TRUE 그리고 description에 간접 경로가 없는 경우에는 무작위로 뽑은
경로가 사용됩니다.
- FALSE 이거나 설정이 안된 경우 무작위로 뽑힌 경로가 사용됩니다.
Connection Manager 설정
CMAN 은 한개의 파일(CMAN.ORA)로 설정된다.
CMAN.ORA 파일은 다음 세개의 부분으로 구성된다.
1) CMAN - Connection Manager를 위한 listening주소를 포함한다.
2) CMAN_PROFILE - CMAN 설정 parameter들을 포함한다.
3) CMAN_RULES - 접속 요청에 대한 필터링에 관련된 규칙을 포함한다.
CMAN=
(ADDRESS_LIST=
(ADDRESS=
(PROTOCOL=SPX)
(SERVICE=CMAN)
(ADDRESS=
(PROTOCOL=TCP)
(HOST=CMAN.US.ORACLE.COM)
(PORT=1610)
이 CMAN의 예에서는 SPX 와 TCP/IP 두개의 주소에서 listening하고 있습니다.
CMAN 은 CMAN이 실행되는 장비에서 oracle이 지원하는 모든 protocol에 대해
listen할 수 있습니다.
CMAN_PROFILE=
(PARAMETER_LIST=
(MAXIMUM_RELAYS=64)
(LOG_LEVEL=0)
(TRACING=YES)
(RELAY_STATISTICS=YES)
(SHOW_TNS_INFO=NO)
(USE_ASYNC_CALL=YES)
(AUTHENTICATION_LEVEL=0)
각 parameter들에 대한 정의 :
MAXIMUM_RELAYS = n
- 허용되는 최대 동시 접속수
- 기본값 8
- 최대값 1024
LOG_LEVEL = n
- CMAN에 의해 수행되는 logging의 level설정
- 기본값 0 ( logging이 안됨 )
- 0에서부터 4까지의 값을 설정할 수 있음
TRACING = [YES | NO]
- YES로 설정하면 CMAN은 파일에 tracing을 한다.
- 기본값 NO
주의: trace파일을 읽기위새허는 Oracle Trace를 사용하면 됩니다.
RELAY_STATISTICS = [YES | NO]
- YES는 I/O활동에 대한 통계정보를 저장하게 합니다.
예를 들어 :
     - IN bytes 수
     - OUT bytes 수
     - IN packets 수
     - OUT packets 수
- 기본값 NO
SHOW_TNS_INFO = [YES | NO]
- Yes로 설정하면 log 파일에 TNS events를 포함하게 합니다.
- 기본값 NO
USE_ASYNC_CALL = [YES | NO]
- YES로 설정하면 CMAN 접속을 실행하고 받아들이고 대답하는 과정에서
모든 비동기적인 기능을 사용할 수 있게 합니다.
- 기본값 NO
주의: CMAN은 out-of-band breaks를 지원합니다.
CMAN은 그것을 서버로 전달합니다.
AUTHENTICATION_LEVEL = [0 | 1]
- 1로 설정하게 되면 CMAN은 Secure Network Services를 사용하지 않은
접속 요청은 거절하게 됩니다
Secure Network Services은 Advanced Networking Option의 일부입니다.
- 기본값은 0 입니다.
즉 Secure Network Services가 필요없다는 뜻입니다.
CMAN_RULES=
(RULE_LIST=
(RULE=
(SRC = shost)
(DST = dhost)
(SRV = services)
(ACT = accept | reject)
CMAN_RULES에 정의된 parameter들:
- shost 는 client에서 session을 요청한 source hostname 이거나
IP address입니다.
- dhost 는 서버쪽의 hostname 이거나 IP address 입니다.
- services 는 SID 이름입니다.
- ACT: 위 세개의 parameter들의 값을 근거로한 들어오는 접속요청에
대한 승인이나 거절입니다.
주의: wild-card는 'x'입니다. IP address (d.d.d.d)인 경우에
각 'd'는 wild-card character인 'x'로 교체될 수 있습니다.
RULE_LIST내에 여러 RULE들이 정의될 수 있습니다.
여러 rule들 중에 처음에 맞는 rule이 그 요청에 적용됩니다.
CMAN_RULES이 존재하는 경우 Connection Manager는 규칙에 허용되지 않은
것들은 모두 허락되지 않게 합니다.
만일 CMAN_RULES이 정의되지 않았다면 모든것이 허용됩니다.
Connection Manager의 제한
만일 connection path에 사용된 Connection Manager가 한개 이상이라면 (1개
이상의 hop이라면), tnsnames.ora를 직접 설정해야 하며 Oracle Names Server
를 사용할 수 없습니다.
TCP/IP network에서만 Connection Manager는 접근 통제(CMAN_RULES)를 할 수
있습니다.
Oracle Multi-Protocol Interchange (MPI) 과의 호환성
client와 server사이에 단 하나의 MPI만 있다면, MPI를
Connection Manager로 교체하십시요.
client와 server사이에 여러개의 MPI가 있다면,
tnsnames.ora를 수정해서 MPI들을 Connection Manager들로
교체하십시요.
SQL*Net V2.x client와의 호환성
Connection Manager를 SQL*Net 2.x clients과 Oracle 8사이의
중심이나 접속 필터로 사용하기 위해서는 다음과 같은 일을
해야 합니다.
1) Connection Manager를 설치하고 설정합니다..
2) SQL*Net v2.x client들을 Connection Manager를 MPI처럼 사용
하도록 설정 합니다.
Server 설정
===========
NET8의 새로운 기능을 이용하기 위해서는 Connection Manager를 설정
해야 하며 서버를 Multi-Threaded Server (MTS)로 설정해야 합니다.
MTS parameter들은 각 instance의 INIT.ORA파일에 설정합니다.
NET8 MTS를 위한 parameter들은 SQL*Net 2과 다르지 않습니다.
다음 Connection Pooling 과 Multiplexing 기능을 사용할때
MTS_DISPATCHERS parameter의 경우만 제외하면 말입니다.
MTS_DISPATCHERS parameter:
     MTS_DISPATCHERS ="(PROTOCOL=TCP)(POOL=NO)(MULT=ON)"
이 예에서 TCP/IP를 위해 dispatcher들을 설정하고 Connection Pooling
기능을 사용하지 못하게 하고, Multiplexing를 가능하게 합니다.
만일 Connection Pooling 과 Multiplexing 를 사용하지 않을 거라면
SQL*Net 2.x용으로 정의된 MTS parameter들을 사용하실 수 있습니다.
좀더 자세한 내용은 MTS관련 문서를 참조 하시기 바랍니다.
Connection Manager를 사용하는 경우, INIT.ORA에 새로운 parameter를
설정해야 합니다. Connection Manager는 한개 이상의 physical connection
을 만들기 때문에 instance의 dispatcher가 허용할 client sessions의 최대값을
알아야 합니다. SESSIONS라는 parameter가 이 값을 설정합니다.
이 값은 'LSNRCTL SERVICES' 명령으로 볼 수 있습니다.
3. 시작 하기 (Windows NT)
Oracle Names server 환경에서 :
- command line utility 사용하기
1. 작업 표시줄에서 시작->실행
열기: x:\CMCTL80.exe (8i에서는 CMCTL.exe)
OK<click>
2. CMCTL> start CMAN <enter>
- Windows NT 제어판 사용하기
1. 제어판>SERVICES <double click>
2. 다음을 찾아 시작 시킵니다.
(주의: 순서대로 시작시켜야 합니다.)
OracleCMAdminService80 <click start>
OracleCMANService80 <click start>
NON-Oracle Names server 환경에서 :
- command line utility 사용하기
1. 작업 표시줄에서 시작->실행
열기: x:\CMCTL80.exe (8i에서는 CMCTL.exe)
OK<click>
2. CMCTL> start CM <enter>
- Windows NT 제어판 사용하기
1. 제어판>SERVICES <double click>
2. 다음을 찾아 시작 시킵니다.
(주의: 순서대로 시작시켜야 합니다.)
OracleCMANService80 <click start>
Reference Ducumment
---------------------

Hi
You must install the Connection Manager, available on the Oracle8 distribution media, onto the Web server host. You can find the installation instructions in the Net8 Administrator's Guide.
On the Web server host, create a CMAN.ORA file in the [ORACLE_HOME]/NET8/ADMIN directory. The options you can declare in a CMAN.ORA file include firewall and connection pooling support
Here is an example of a very simple CMAN.ORA file. Replace <web-server-host> with the name of your Web server host. The fourth line in the file indicates that the connection manager is listening on port 1610. You must use this port number in your connect string for JDBC.
cman = (ADDRESS_LIST =
(ADDRESS = (PROTOCOL=TCP)
(HOST=<web-server-host>)
(PORT=1610)))
cman_profile = (parameter_list =
(MAXIMUM_RELAYS=512)
(LOG_LEVEL=1)
(TRACING=YES)
(RELAY_STATISTICS=YES)
(SHOW_TNS_INFO=YES)
(USE_ASYNC_CALL=YES)
(AUTHENTICATION_LEVEL=0)
Ariel G.

Incoming network connections message

I keep getting this message every time I open iTune, "Do you want the application "iTunes.app" to accept incoming network connections? I have set accept in security preferences, what is it all about? Thanks Alex

I have an even better solution for you. No uninstalling or re-downloading.
In security (located in system preferences) Click the firewall tab followed by the advanced button down the bottom. Check all the applications you want are set to allow incoming connections. Close security preferences. Then open a finder window Navigate to -> Macintosh HD -> Library -> there will be a file called, com.apple.alf.plist delete it, reboot and your done. Deleting this small file re-builds the Firewall preferences and you will no longer be asked to accept incoming network connection every time you open an app. As long as the app your opening is on the list in the firewall tab your good to go Email me at [email protected] if this worked for you

Updated iTunes to newest version, and once iTunes opened, it crashes immediately. Have tried uninstalling and reinstalling the program numerous times. Also had a hard time getting a network connection over the weekend (I knew my connection was fine)

Updated iTunes to the newest version but have been unable to use it since. Once it opens and tries to connect to the iTunes store it crashes and asks me to close the program and report the problem. In the Windows information center, it tells me to update iTunes to the newest version to fix the problem; when I do and I tell it to repair the problem it goes through the motions, but the program doesn't change, it still doesn't work. I have tried uninstalling and resinstalling the program numerous times from the weekend until now to no avail. After the update was completed, it had a difficult time making a network connection; I knew that the connection was fine, as I was on the internet and receiving e-mail at the same time.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Office Word 2008 crashes when trying to open a local stored document ONLY if network connection is down

Sorry to bother you all but I have a situation I can't find a solution for:
on a MBP 2009, running Mac OS X 10.6.8 and MS Office 2008 (up to date), if I open a local stored document AND the unit is connected to the network everything works fine.
As soon as I switch off the network connection and I open a local stored document Word freezes and within "Force quit..." I can see that Word is no longer responding. A few minutes later OS X quits Word and that's it.
I already checked Safe boot, removing the Microsoft plist's and reinstalling MS Office 2008 including all available updates but the situation is still the same.
Any ideas?
Thanks in advance
Robert

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account

InDesign Crashing on file open - Missing Font / Network Connection Lost

For starters I am using InDesign 5.5 When I open the file, either by clicking on the file through finder or or opening it through indesign I get the following error message:
The document "file name.indd" uses one or more fonts which are not currently available on your system.
I can't press either Find Font or OK - wheel spins then after 30 seconds or so and then I get the message:
The network connection was lost for the file "file name.indd", or the file was modified by another process.
Press OK. Nothing happens. Activity monitor says Indesign is using 100% of the cpu and not responding. The file is on my local machine and nothing has changed on it since the last time I opened it without issues 3 days ago. I'm not running anything that could be using the file or any of the images the file uses. I have downloaded and installed the font that was missing and the error message hasn't changed. Any ideas?

Try the option: save a copy for duplicate a file
Hope,it works

InDesign CC 7 crashes when network connection is lost.

Hi all,
I'm trying to troubleshoot an issue with InDesign CC7. I tend to work on documents from our server at work, and each time the network connection is interrupted (I undock my laptop to walk around, switchover from wireless to wired, brief hiccup in the lan, etc) and I have an InDesign document open, I recieve an error message from InDesign that I've lost the network connection to the document (fair enough).
When I acknowledge that message, InDesign becomes unresponsive and crashes. You'd think that as soon as the network connection is reestablished (usually a fraction of a second), the connection to the document would be reestablished, or at worst, I'd have to do it manually. When I restart InDesign, I usually am able to enter recovery mode and get my work back, but on occasion, I lose quite a substantial portion of my work. This has lead to inaccuracies and duplication, becasue I think I've taken information out of one portion of the manual and put it somewhere else, but in reality, the information I removed has been replaced during the recovery process.
I don't understand why the program crashes each time a network connection is lost. The obvious answer is to work locally and save on the network, but I shouldn't have to do that to keep the program from crashing. If anyone has any insight, please let me know. Thanks.

You may also want to edit the advanced power settings on your computer to not turn off the hard drives, not put the computer to sleep, etc.
You can get to these settings in windows by right clicking on your desktop, select personalize, then screen saver in the lower right. Now click on the "Change power settings" link towards the bottom, then change the plan settings for the plan that is currently in use. You will then see the "change advanced power settings" link. I'm sure there is an easier way to get to it, that is just how I always do it and I tend to be a creature of habit
**edit** the other way is Control Panel -> Power Options
And also be sure to configure your network adapter so that windows can't turn it off.
Here is a microsoft link with a handy fix-it tool to automatically turn off the network adapter power management settings:
http://support.microsoft.com/kb/2740020

Indesign Lost network connection of open database

good day
The Indesign is stopping with this error.
Lost network connection of open database
How to solve this problem?
Message was edited by: jcnet

Hi, I discovered in (Win 7 & 8 I assume) that if you go into your network adapter settings and click 'Configure' then go to the 'Power Management' menu there is an option to 'Allow the computer to turn off this device to save power'. I unchecked this and now no more crashing with the network connection lost error. Not sure it will work for everyone but might be the solution for some.

Slow network connection possibly causing a slave to crash.

We are using Berkeley DB XML 2.4.16 (Patch level 1) in combination with Berkeley DB 4.7.25 (Patch level 3). These are Java processes.
We have a 4 node replication group with a master and a slave in the US, a slave in the UK and a slave in HK. We are using the built in replication manager. The acknowledgement policy is set to none. The HK slave OS is Red Hat Enterprise Linux ES release 3 (Taroon Update 8).
The slave in HK is on a fairly slow network connection to the master in the US.
The amount of traffic generated by the master can become fairly busy at times and this seemingly causes the HK slave to become fairly unstable. It would routinely crash (SIGSEGV) with the following back trace caught with gdb and a debug build of Berkeley DB XML/Berkeley DB. The location of the crash is very consistent. The UK slave also suffers this problem, but to a lesser degree (I suspect the faster network link to the UK to be a factor here).
#5 <signal handler called>
#6 0xb74fb2f8 in intfree () from /lib/tls/libc.so.6
#7 0xb74fa278 in free () from /lib/tls/libc.so.6
#8 0x6b7eee53 in __os_free (env=0x0, ptr=0x6ba335c0) at ../os/os_alloc.c:405
#9 0x6b751375 in message_loop (env=0x6ba1acc0) at ../repmgr/repmgr_msg.c:49
#10 0x6b7512a4 in __repmgr_msg_thread (args=0x6ba1acc0) at ../repmgr/repmgr_msg.c:29
#11 0xb75c9dd8 in start_thread () from /lib/tls/libpthread.so.0
#12 0xb7565d1a in clone () from /lib/tls/libc.so.6
We had been adjusting the rep_set_limit environment parameter to see if it would help. First to 5MB, then to 1MB with little or no improvement.
In an attempt to gather more information I had activated verbose replication logging on the HK slave which has had the side effect of fixing the problem.
Does this sound like something that could be addressed with the rep_set_request parameter?
I am no master on tuning these replication settings so some guidance would be appreciated.
Thanks,
Neil

OK,
I was able to reproduce the crash once again with verbose replication logging at the master, I know the verbose logging at the slave would be better but as we discussed that in fact fixes the problem, probably due the additional logging is throttling the replication mechanics a little.
Here is the back-trace…
#5 <signal handler called>
#6 0xb74fb2f8 in intfree () from /lib/tls/libc.so.6
#7 0xb74fa278 in free () from /lib/tls/libc.so.6
#8 0x6b7d3e53 in __os_free (env=0x0, ptr=0x6b9de2b0) at ../os/os_alloc.c:405
#9 0x6b736375 in message_loop (env=0x6b941da0) at ../repmgr/repmgr_msg.c:49
#10 0x6b7362a4 in __repmgr_msg_thread (args=0x6b941da0) at ../repmgr/repmgr_msg.c:29
#11 0xb75c9dd8 in start_thread () from /lib/tls/libpthread.so.0
#12 0xb7565d1a in clone () from /lib/tls/libc.so.6
Here is control info…
print msg->control
$1 = {data = 0x6b9de2f0, size = 36, ulen = 0, dlen = 0, doff = 0, app_data = 0x0, flags = 0}
x/36xb msg->control.data
0x6b9de2f0: 0x00 0x00 0x00 0x05 0x00 0x00 0x00 0x0e
0x6b9de2f8: 0x00 0x00 0x00 0xf6 0x00 0x37 0x1a 0xd7
0x6b9de300: 0x00 0x00 0x00 0x0b 0x00 0x00 0x00 0x01
0x6b9de308: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x6b9de310: 0x00 0x00 0x00 0x64
The HK site was a bit behind when I started the tests, I didn't have the slave instance up over the weekend, I don't now if this really effects the results as I believe the HK has a hard time keeping up when there is a large volume of replication traffic in the normal case, hence the resulting crash is the same…
Before the crash, the slave was synchronizing with the master and it was sending out what I would guess normal "nobuf" messages. This is quickly followed by a large amount of "nobuf resend" messages. This continues for a bit intermixed with " MASTER: wrote only 53 bytes to site XXX.XX.XX.XX:58010" (The number of bytes are random). In the end it starts logging the following several times along with the "nobuf resend" messages..
MASTER: msg to site XXX.XX.XX.XX:58010 to be queued
MASTER: block msg thread, await queue space
MASTER: will await drain
MASTER: drain returned 0 (0,0)
If you would like to take a look at the actual log, I will need a way to filter any sensitive information (which could prove to be difficult) or attempt to reproduce it with another pair rigged to be something generic and hope it exhibits the same behavior.

Re: Mobilink Network Connection manager crashes on opening

Similar Messages

Maybe you are looking for