Re: [MOD]MSI PRO MOD Interview (XPOWER Loader – Soccer & BaluC)

It was amazing to see the "movie role" showing with case modding project.
maybe one day there will be an museum and display all the master piece

Quote from: mhafiznoor on Today at 03:08:35either FX-6300 or FX-4350, which one is better?
FX-4xxx = 4 cores
FX-6xxx = 6 cores
FX-8xxx = 8 cores
Of course the 6300 is better (more powerful) and does not c...

Similar Messages

MSI PRO MOD Online Competition

The MSI PRO MOD online competition STARTS NOW!
It is your chance to show your professionalism to the world and get the grand prizes.
To enter the competition, please follow steps below –
***Steps & Rules***
▪ Register an account on MSI Forum. (Existing Forum account holder can skip this step).
▪ Submit your worklog(s): User Reviews & Modding by JUN 30. 2015 PM11:59 (GMT +8).
▪ Upload the following in your worklog:
1. Create a new topic and name the subject with 【MSI PRO MOD】in front of your mod entry title.
Ex: 【MSI PRO MOD】Blood Dragon
2. Hardware spec of your mod. (model name of MSI motherboard & graphics card must be highlighted.)
3. Description/concept of your mod entry.
4. Post (1) or more pictures of all the components you will be using in your mod (make sure all components are
recognizable).
5. Provide a full worklog with process images and description.
6. 5 or more pictures of your FINAL mod entry (preferably W600 x H400 pixels in .jpg file format) including 1 highlight
MSI motherboard & graphics card (name specified).
▪ Update and complete your worklog by JUN 30. 2015 PM11:59 (GMT +8).
▪ Before the submission deadline - You MUST finish your mod.
▪ Once you finish the mod, please reply the following message here by June 30. 2015 PM11:59 (GMT +8).
▪ MOD entry title
▪ Linking of your worklog
*Entries that did not satisfy all rules stated on this page will be automatically disqualified.
***Duration***
APR 9 AM10:00 - JUN 30, 2015 PM11:59 (GMT + 8)
***Notice***
1. The motherboard and graphics card assembled in your mod MUST be MSI brand.
2. The photos you upload must be high resolution (larger than 1MB per photo).
***Evaluation/Winning Criteria***
Stage 1:
JUL 1 - 3, 2015
Scored by official judges of MSI & Sponsor Partners
▪35% Creativity
▪35% Overall design
▪30% Technique
The best 10 finalists will enter the stage 2 scoring process.
Stage 2
JUL 10 - 23, 2015
▪70% Score of stage 1
▪30% Vote (by the fans of MSI Global Fan Page)
The 1st / 2nd / 3rd place will get the Grand Prizes.
***Prize***
1st Place (Prize Value $800)
▪Motherboard: MSI X99A SLI KRAIT EDITION
▪Case: Thermaltake V51
▪Power: Thermaltake Toughpower DPS G 1050W
▪Cooling System: Thermaltake AIO LCS Water 3.0 Extreme S
2nd Place (Prize Value $350)
▪Memory: Kingston HyperX FURY Memory Black - 16GB Kit* (4x4GB) - DDR4 2666MHz CL15 DIMM
▪SSD: Kingston HyperX FURY SSD/120GB
3rd Place (Prize Value $250)
▪Keyboard: Tt eSPORTS POSEIDON ZX (Brown Switch Edition)
▪Mouse: Tt eSPORTS VENTUS
▪Headset: Tt eSPORTS VERTO
Special Thanks for: Kingston Taiwan, Kingston APAC, HyperX, Thermaltake Technology Inc, TteSports
*** Competition Terms and Conditions***
▪Contestants must agree to the terms & conditions to enter the competition.
▪Multiple entries by each individual is accepted.
▪Any copyright infringement or piracy is absolutely forbidden. Your designs should be just that – your own case mod and case mod images!
▪Winners will be announced online and contacted via phone and/or email.
▪MSI may use your mod images with or without any pseudo (pen) name credit.
▪MSI has the right to use your mod images and is perpetual. We may use your mod images locally, nationally or globally and such use may be made in any media, information or communication platform currently in use or later developed.
▪Usage or reprint of your mod images will be at sole discretion of MSI and the sponsors of this event without compensation.
▪MSI reserves the right in its sole discretion to alter competition rules at any time.
▪Contestants who do not agree to the above terms and conditions should not enter this competition.
▪By participating, you conclusively agree to be bounded by these competition rules and conditions. This is an irrevocable condition of entry.

Dear all,
So far, we have some great submissions, please take a look via below link:
【MSI PRO MOD】"KRAIT EDITION" By MathMilitaryModding
https://forum-en.msi.com/index.php?topic=254726.0
【MSI PRO MOD】"Like Bruce Wayne" by FrostMod
https://forum-en.msi.com/index.php?topic=254716.0
【MSI PRO MOD】Xpower loader
https://forum-en.msi.com/index.php?topic=254815.0
【MSI PRO MOD】Antec P380 CeBIT 2015 demo system
https://forum-en.msi.com/index.php?topic=254841.0
【MSI PRO MOD】 "Silverstone" by BlackKeys
https://forum-en.msi.com/index.php?topic=254955.0
【MSI PRO MOD】 AT DOOM'S GATE
https://forum-en.msi.com/index.php?topic=255601.0
【MSI PRO MOD】IRON MAIDEN bY Mario Viana (2XHAF XB)
https://forum-en.msi.com/index.php?topic=255280.0
【MSI PRO MOD】Back to the Modh
https://forum-en.msi.com/index.php?topic=255293.0
【MSI PRO MOD】MSI artifact easyfix&warboy
https://forum-en.msi.com/index.php?topic=255312.0
【MSI PRO MOD】 ENT - by BaluC New
https://forum-en.msi.com/index.php?topic=255504.0
【MSI PRO MOD】 Hulk XPower
https://forum-en.msi.com/index.php?topic=255577.0
【MSI PRO MOD】Buyangyang by Arcis Modz
https://forum-en.msi.com/index.php?topic=256176.0
【MSI PRO MOD】Nocturnal Hunter by RandomDesign
https://forum-en.msi.com/index.php?topic=256350.0
【MSI PRO MOD】 Tri-MAX!
https://forum-en.msi.com/index.php?topic=256427.0
【MSI PRO MOD】Prodigy RMK-02 by: WestSideCaseMods
https://forum-en.msi.com/index.php?topic=256546.0
[MSI PRO MOD] 浴血龍魂
https://forum-en.msi.com/index.php?topic=256642.0

[MSI PRO MOD] IRON MAIDEN bY Mario Viana (2XHAF XB)

【MSI PRO MOD】 IRON MAIDEN bY Mario Viana (2XHAF XB)
DESIGN: Iron Maiden: COOLER MASTER HAF XB DUAL "Modder MVIANA"
I apologize for the photos, they are mobile and also do not dominate the English
The hardware is not as current, however still gives a broth, and in the end this is a casemod contest and not enthusiasts.
The basis of waste offices will be two HAF XB.
Hardware:
MSI XPOWER BIG-BANG.
2 Video Cards MSI GeForce GTX 580 Lightning Xtreme Edition 3GB.
Processor Intel Core i7 LGA 2011
memory Kingston
Kingston SSD HiperX? 02 Units in Raid 0
HD 2TB Black Cavia.
Source Cooler Master, 1300Wats.
2 Offices HAF XB.
Custom cooling.
Tube transparent hard acrylic.
Fittings and EK Bitspower.
2 Radiators Black Ice GTX 360.
EK water block for the processor.
2 Water block for boards Bitspower Video.
3 Monitors Benq XL2420T
NVIDIA 3DVision glasses 2
Airbrushing by Master
Initial idea.

Top of the cuts to make the union of the two cases.
Good Guys, as the top of the case will all connections motherboard features, the challenge there
will create something that hides the wiring and change the characteristic of the case so do not be appearance
a square box, lebrando that the design and craftsmanship throughout.
Taking the mold and transferring the markings for the role.

Design mode could not load ... It may be incompatible...:FB4 Beta 2 and Flex SDK 4.1

Hello,
ever since I upgraded to the latest nightly builds about two weeks ago (SDK 4.1) I get the error mentioned above, and the design mode of Flash Builder 4 Beta 2 doesn't work any more:
Design mode could not load he.enwipe.core.swc. It may be incompatible with this SDK, or invalid. (DesignAssetLoader.CompleteTimeout)
Design mode could not load PureMVC_AS3_MultiCore_1_0_5.swc. It may be incompatible with this SDK, or invalid. (DesignAssetLoader.CompleteTimeout)
and also all other "swc" inside my project that do not come directly from the SDK or Flash Builder.
Any ideas what could be the cause?

Hi,
Did you switch your projects build option to merge into code rather than have runtime libraries generated.
David.
[edit'] I really should sleep a bit more- I miss read the question, but you will probably need to break down your project to see what the issue is mxml by mxml, one thing is that any mxml headers need to halo name space renamed to mx.
as below -
xmlns:mx="library://ns.adobe.com/flex/mx"

Design mode could not load playerglobal.swc.

I'm getting this warning
Design mode could not load playerglobal.swc. It may be incompatible with this SDK, or invalid. (DesignAssetLoader.CompleteTimeout)
I installed Flash Builder 4 Beta 2
And added the
Player Global SWC
Create content using the new APIs available in Flash Player 10.1 using Adobe Flash Builder 4 or Adobe Flex Builder 3. Installation instructions are included within the ZIP file.
Download Player Global SWC (ZIP, 294 KB)
How do I eliminate this warning?
Thanks,
Don

Hi,
If you want to use the new fp 10.1 features I would recommend that you download the latest nightly build of the sdk, this includes features required for 10.1 and also has both both globalplayer swc's. You can then target then player 10.0.0 or 10.1.0 in the project settings.
Also make sure that the flashplayer 10.1 beta is correctly installed.
David.

Burrito - Design mode could not load

Also in Burrito i get the Warning in Problems View:
Design mode could not load Mate_08_9.swc. It may be incompatible with this SDK, or invalid.
The message appears also for SQLExtension ans ThonderBolt.
Is there a solution available or it is still a bug?
thanks
Frank

Hi,
There is no issue in Design view related to this. mate_08_9.swc is not compatable with the sdk you are using. So no change planned from FB side for this. Please contact the swc owners to resolve the issue.
Theoritically this should not affect the DV fucntionalities (which dont depend on this swc)
Very soon we will be providing an applicaiton (Not part of FB) which can be used by the swc owners to anlyse the DV reported issues of their swc.
thanks,
Rani

DIRECT MODE에서의 PARALLEL DATA LOADING

제품 : ORACLE SERVER
작성날짜 : 1999-08-10
Direct mode에서의 parallel Data Loading
=======================================
SQL*Loader는 동일 table에 대한 direct mode에서의 parallel data load를
지원하고 있다. 이는 여러 session에서 동시에 데이타를 direct mode로 올림으로써
대용량의 데이타의 로드 속도를 향상시킬 수 있다. 특히, data file을 물리적으로
다른 disk에 위치시킴으로써 더욱 큰 효과를 낼 수 있다.
1. 제약사항
- index가 없는 table에만 로드 가능
- APPEND mode에서만 가능. (replace, truncate, insert mode는 지원 안됨)
- parallel query option이 설치되어 있어야 함.
2. 사용방법
각각의 data file을 load할 control file들을 생성한 후, 차례차례 수행하면 됨.
$sqlldr scott/tiger control=load1.ctl direct=true parallel=true&
$sqlldr scott/tiger control=load2.ctl direct=true parallel=true&
$sqlldr scott/tiger control=load3.ctl direct=true parallel=true
3. constraint
- enable parameter를 사용하면 데이타 로드 작업이 모두 끝난 후, 자동으로
constraint을 enable시켜 준다. 그러나 종종 enable되지 못하는 경우가
있으므로 반드시 status를 확인해야 한다.
- primary key 나 unique key constraint이 걸려 있는 경우, 데이타 로드 후
자동으로 enable할 때, index를 생성하느라 시간이 많이 소모될 수 있다.
따라서 data만 parallel direct 모드로 로드 한 후, index를 따로 parallel로
생성하는 것이 성능 측면에서 바람직하다.
4. storage 할당 방법 및 주의사항
direct로 데이타를 로드하는 경우 다음 절차를 따라 작업한다.
- 대상 table의 storage 절에 기초해 temporary segment를 생성한다.
- 마지막 데이타 로드 작업이 끝난 후, 마지막에 할당되었던 extent의 비어 있는
즉, 사용하지 않은 부분을 trim 한다.
- temporary segment에 해당되어 있는 extent들의 header 정보를
변경하고, HWM 정보를 수정하여, 대상 table에 extent가 소속되도록 한다.
이러한 extent 할당 방법은 다음과 같은 문제를 야기시킨다.
- parallel data load에서는 table 생성 시 할당된 최초 INITIAL extent를
사용하지 않는다.
- 정상적인 extent 할당 rule을 따르지 않고, 각 process는 next extent에
정의된 크기를 할당하여 data load를 시작하고, 새로운 extent가 요구될
때에는 pctincrease 값을 기준으로 할당되게 되는데, 이는 process 간에
독립적으로 계산되어진다.
- fragmentation이 심하게 발생할 수 있다.
fragmentation을 줄이고, storage 할당을 효율적으로 하기 위해서는
- INITIAL을 2-5 block 정도로 작게 하여 table을 생성한다.
- 7.2 이상 버젼에서는 options 절에서 storage parameter를 지정하여
사용한다. 이 때 initial과 next를 동일한 크기로 주는 것이 바람직하다.
OPTIONS (STORAGE=(MINEXTENTS n
MAXEXTENTS n
INITIAL n K
NEXT n K
PCTINCREASE n))
- options 절을 control file에 기술하는 경우 반드시 insert into tables
절 다음에 기술해야 한다.

First, thanks for the hints. In the meanwhile I found some other documentation regarding my issue.
As far as I understand, if I want to load parallel, I have to create multiple InfoPackes and split up the records in the selection criteria, e.g.:
- InfoPackage 1, Students 1 - 10.000
- InfoPackage 2, Students 10.001 - 20.000
...and so on.
Following that I need to create a Process Chain that starts loading all packages at the same point in time.
Now...when the extractor is called, there are two parts that it runs through:
- Initialization of the extractor
- Fetching of records
( via flag i_initflag in the extractor ).
In the initialization I want to run the pre-fetch module. I worked everything regarding that already. Only when the pre-fetch is finished, will the actual data loading start.
What I am not sure about is: Is this flag (the i_initflag mentioned above) passed for each InfoPackage that is started?
Jeroen

"Error code 0xc000035a Attempting to load a 64-bit application, however this cpu is not compatible with 64-bit mode" when I load Windows 7 [64bit] on an older iMac(with Parallels 6)? Any solutions that don't mean buying a new iMac?

"Error code 0xc000035a Attempting to load a 64-bit application, however this cpu is not compatible with 64-bit mode"
when I load Windows 7 [64bit] on an older iMac(with Parallels 6)? Any solutions that don't mean buying a new iMac?

You should probably post your question on the Parallels forums: http://forums.parallels.com

I7 920 on MSI Pro OC

Hey guys, I'm just going to post my OC and see if this is ok. I haven't messed with any of my voltages. I have my i7 920 on my MSI Pro with EIST off (so no turbo mode). Spread spectrum disable (that is what I read....I have no idea what it does) and overspeed proection disabled. My Base Clock is 177mhz with a multiplier of 21. Now Windows is reporting 3.5GHz (a 20 multiplier) while CPU-Z reports a 21 multiplier for 3.72GHz. I trust CPU-Z, but I don't know why Windows reports 3.5GHz. Also, when I run a stress test (Prime95) for all 4 cores (or I guess "8" with hyperthreading) the multiplier drops down to 20 (according to CPUZ) which doesn't make sense to me because I though I disabled all features that slow it down. It's not a big deal, but any ideas why?
Also, another weird problem. Before I had bios version 7.0, I had EIST on (with turbo mode) and set the base clock to 183 to get 3.66GHz. Ran great, stable as a rock, went up to like 3.8GHz or so when running single threaded apps. But now with bios version 7.1, I can't get that exact same settings. It crashes/locks up when I try to load any game or stress test. I don't know why a BIOS update would prevent that. That is why I am now using my new OC settings (described before). I don't get it.....thanks!
Windows XP
MSI pro
Core i7 920
3x2Gigs DDR3 1333 Corsair RAM
Sapphire ATI 4870x2
950 watt PSU

EIST is a power saving feature, when 'Enabled', it steps down the CPU at idle or low requirement. Spread Spectrum 'Enabled' is for systems plagued with EMI problems. Here is a link to a good forum thread that talks a lot about the 21 multiplier. https://forum-en.msi.com/index.php?topic=124684.0
The bios version 7.1 should have given you QPI 'realtime' voltage in Cell Menu. That is a plus. As to why some parameters get changed with a new bios, I'm not sure any of us know that one. If you wanted to, a reflash back to the 7.0 version is always an option. Windows is showing correctly, as well as CPU-Z. The 920 can't stay at 21 multiplier at full load, as it is limited, locked by Intel.

MSI-PRO-E Motherboard and OCZ3G1600LV6GK

I have been doing some research and am deeply confused. I am going to be buying a MSI Pro-E motherboard and am planning on buying OCZ Gold Ram (3 x 2GB). I was looking at the timings and am getting confused. Some people are saying you have to mess with the BIOS to get the timing to 8-8-8-24, and others are saying that you don't have to do anything. So I am wondering if you actually have to do anything in order to obtain the timing of 8-8-8-24? Also Can the motherboard run RAM at 1600Mhz without overclocking or would I have to overclock the RAM in order to get that speed?
Here are the links to the RAM and the Motherboard:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820227365&cm_re=OCZ_RAM-_-20-227-365-_-Product
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130226&cm_re=MSI_PRO_E-_-13-130-226-_-Product

Quote from: Disloyalcarrot on 16-December-09, 07:48:50
Thanks for the reply. Sorry I forgot to mention that I am going to be using a I7 920 processor. Also I found a picture of the bios settings someone had and they were doing the second method you mentioned. I don't think it has more than 1 XMP profile, and if it does I'm probably not going to change it because I will be using the second method. So just to double check to make sure I'm not messing this up, I want to set it to 2N not 1N right? (Just checking cause I read somewhere that you usually leave it on 1N.)
Typically you will want to use 1N but some RAM won't be able to do it properly...
Something else you may want to consider: If you use 1333 mode instead of 1600 you won't have to increase voltage and often can use much better RAM timings. I've some 7-7-7-20 Corsair RAM in here but when I found out that in 1333 mode it runs with 4-6-6-15 without the requirement to increase the voltage, I was very happy to leave it at that. There are also other timings which can nicely be set manually - my tRFC is 49 instead of 88 now!
Something which may speak against using XMS info: My corsair RAM is a triple kit, but somehow one module has one value set differently than the others in there...thus I'm using manual setup now (tRFC was set much too high anyway, it wasn't even using XMS info).
Screet

Are these temps ok? (Core i7) (MSI Pro-E)

Hello folks, before I started doing some light OC, I wanted to make sure that my system was stable at stock settings, without any after market cooling devices.
My h/w specification goes like this:
CPU - Core i7 920 D0 Stepping 2.67 GHz
Motherboard - MSI Pro-E
RAM- Corsair 6 Gb kit 1333 MHz
Video card- Nvidia 9500 GT 1 Gb
Hard drives- WD 500 Gb X 2
Operating system- Ubuntu 9.10 64 bit
PSU- Corsair VX450W
I ran Mprime (the linux port of Prime95) for an hour without any issues. The temperatures were as follows:
Idle: CPU: 25-26
IOH: 64
Load: CPU: 84
IOH: 77
I know that IOH temps are high at idle, but am getting an Antec Spot Cool fan to fix that. (thanks to the informative discussions on the forums)
However what I want to know is that at full load, isn't the CPU temp too high ? My system didn't crash, but since I am new to this subject, please let me know what you think. Also, since it has been mentioned in the forums in threads regarding the high IOH temps that a lot of after market coolers leave little room for cooling of the heatsink...which brand/model/type of an after market CPU cooler according to you folks should I go for ?
Also, is there a possibility of slightly OCing the system, say up to 3 GHz, with the stock cooler, or should I start saving for a good CPU cooler ?

Quote from: Aaron on 11-February-10, 12:28:13
84 at stock? Something wrong there. Shouldn't even be going over the 50s. Make sure you installed the CPU cooler correctly. If you reinstall it and the temperatures are the same, then the chipset heatsink is making little/obscured contact and needs to be reinstalled. A fresh blob of TIM on the chipset wouldn't hurt either. (Doing both the CPU and chipset coolers would not hurt one bit.)
I still don't know why MSI's IOH temperatures are still so high. It's been months now and they still have this inconvenience/issue.
Thanks a lot for the information. I have re-checked and the CPU cooler is installed fine, is fixed tight. I will try your other suggestions as soon as I get the thermal compounds. Sidenote- Arctic Silver Ceramique should be fine, right ?
Quote from: HU16E
IOH is ok, but if you feel adventurous, new TIM & adding a nylon washer between the stock washer & spring should help. The Antec Spot Cool is a great temp reducer. All my rigs run a Zalman 9900. One reason I like it on an X58 rig, is because it gives a little passive air onto the IOH similar to the stock cooler. smile
Added: Once you get that high CPU at load figured out, you should be able to run the stock cooler up to around 3.5-3.6 with no problem.
Thanks HU16E, your posts on the other thread (on high IOH temps) have also been useful. I will look into buying the Zalman 9900, thanks for the info.
I hope I haven't done any damage to the CPU by running that stress test for an hour. (n00b query: why didn't my system shutdown at such high temperature ?)

I have a mac pro g4 when i load a cd or dvd there is no start up noise from drive and icon will not show on desktop or in itunes. How should i troubleshoot? pioneer 105 mirror door

I have a mac pro g4 when i load a cd or dvd there is no start up noise from drive and icon will not show on desktop or in itunes. How should i troubleshoot? pioneer 105 mirror door

PIONEER DVD-RW DVR-105:
Firmware Revision:          A506
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2000 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          Insert media and refresh to show available burn speeds
yes its a power mac thanks its been a long month and Merry Christmas thanks for checking my question im hoping its a driver problem but not liking some other stuff looking like replace drive

How to adjust VCORE in MSI Pro-E X58?

Hey guys; I've built my first rig and I'm interested in overclocking the i7 I've bought. I've already read a lot on OC'ing and the potential hazards that come with it. In any case, I own the MSI Pro-E X58 and was looking to OC. I've steadily increased the BCLK using the default voltages, but when I hit 3.4 GHz (with a BCLK of 170), Windows crashed after about an hour of P95. I opened the cell menu in the BIOS looking to bump the voltage up a notch, but am a bit confused as to how to do this. Under the cell menu, I noticed the "CPU Vcore" at 1.328 V; I find this odd because I thought the default voltage setting for the Core i7 was 1.2? Also, I'm somewhat unsure as to what the "CPU Voltage" setting does; is this linked wit the "CPU Vcore" setting? My best guess so far is I can change the CPU Voltage to +/- from the CPU Vcore but I'm not entirely positive. Any help would be great.

Quote
I noticed the "CPU Vcore" at 1.328 V; I find this odd because I thought the default voltage setting for the Core i7 was 1.2?
QPI is 1.20V default on the Pro-E. Your CPU Vcore of 1.328V's will need to be bumped a bit to remain stable. CPU V./Vcore, basically the same thing. Just bump up the CPU V. a step at a time until the system remains stable. Be sure Spread Spectrum in bios Cell Menu is disabled. Remember to keep an eye on the RAM speed as you increase bclk. That can be another source for instability.

Our Band purchased Logic Pro and it was loaded to one member's Macbook Pro. Unfortunately, he passed away with cancer in May. How can we transfer the ownership and the software (it was downloaded) to a new user's Macbook?

Our Band purchased Logic Pro and it was loaded to one member's Macbook Pro. Unfortunately, he passed away with cancer in May. How can we transfer the ownership and the software (it was downloaded) to a new user's Macbook?

Hi Kurt,
The Mac IIci is not even powering on at all. Tried again with wih a tested power cable and no luck.
I think it's best that take this issue to the Older Hardware Community. Not only did I see a fair number of replacement parts for the IIci avaiable online, but there also vintage external floppy drives as well. I'm not giving up.
Thank you for your time and interest in helping.

MSI PRO e DEAD ?!?

Hi,
Under is my post from tech powerup. So as last thing I post it on your forum.
Quote
Hi,
I need some advice what to do ...
Today, I turned on my pc (see specs watched some news, facebook ,etc.)
I noticed that I have 1 left FAN for my PC from work (got from some new case, quiet with normal connecotr SYSFAN), so I wanted to install it because I needed more airflow .
So installed turned on , saw that POWERLED is not working. Checked and it was plugged. So I turned on AND no BEEP !
Tried agan NO BEEP (ofc normal booting sound of Corsair H50, etc) after 5 sec It rebooted and again no beep. It stays just like that (turned on).
ANY ideas ???
OFC no post , blank screen
today: Tried both GPUs separatedly , still nothing
Tried all RAMs seperately
Removed all driver
changed speaker
Changed GPU to Nvidia 6200LE
Checked CPU
Checked CPU pins
Cleared CMOS
Took out battery for CMOS
AND STILL NOTHING = Rly angly ... = Blank screen
Yea , working all fans , all leds (phase of CPU) , just NO POST NO BEEP - Turn on , reboot after 5 sec and stays that way.
BTW I planned to put this board to server in next 3 days, it was on my schelude , now, I can just watch dead Board with working Leds and Fans ...
PS: It's really possible to destroy board by connecting SYSFAN bad way ?
EDIT: as I can see , under me is same problem with MSI PRO e ... NICE
Thanks for your fast reply

Have you tried disconnecting the power cord, removing the battery and resetting the CMOS via the pins (should show how in your manual), reinsert battery, then check all power connections to mobo, ensure mobo attached firmly at all standoffs (to eliminate shorts), plug in and try to power up.

Re: [MOD]MSI PRO MOD Interview (XPOWER Loader – Soccer & BaluC)

Similar Messages

Maybe you are looking for