Re: Modified Standard Program into Not Change mode without SSCR

Hi
We Have Changed Standard Program with help of SSCR key.Now that Program is in Change mode We want to put that program in to SAP standard Program mode(i.e.Display mode ).Is there any Procedure For this
Thanks & Regards

Hi
Generally we do this using program
RS_TRANSTRU_ACTIVATE_ALL
Programe to activate Transfer Rules in BW
use program RSDS_DATASOURCE_ACTIVATE_ALL to activate the data sources
Regards,
Venkatesh

Similar Messages

I to use iphoto library manager to save corrupted iphoto and each time it saves some and the first time it brings up iphoto, iphone goes into "not responding" mode. Using mac book pro, iphoto 9.5.1, and maverick 10.9.2.

I've had issues with my iPhoto "not responding" and as a result I am attempting to save my photos to an external hard drive using iPhoto library Manager but each time I start the program it saves some, and then when it starts iPhoto, iPhoto then goes into not responding mode. Using mac book pro, iphoto 9.5.1, and maverick 10.9.2. I have completed all of the photo library first aid steps several times, but it makes no difference, iphoto eventually goes to "not responding." Initial issues started with Time Machine back ups stopping because of iphoto. Thanks......

Do you have a back up?
If you're just trying to recover the photos you can do that much more simply:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Originals' or 'Masters'. (varies according to the version of iPhoto)
Your photos are inside - these are the originals as imported from your camera.

How to modify standard programs

HI FRIENDS..........
is there any way to modify standard programs.....

Hi Suresh,
in the past it was necessary to modify standard programs. Today SAP offers lots of possibilities to modify programs without doing what SAP calls MODIFICATION.
Have a look at the <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm">Enhancement Framework</a>, especially the different <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/70/63da4023a28631e10000000a1550b0/content.htm">Enhancement Technologies</a>
If you do not understand everything, don't worry: Nobody does but it gives you some hints.
Let us know why and where you think about modification. I'm convinced there are many nice solutions on hand.
Regards,
Clemens

Firefox browser keeps going into not responding mode and the firefox experts continue to "not respond" to the problem. Firefox 11.0 and W7.

Firefox browser keeps going into not responding mode and the firefox experts continue to "not respond" to the problem. Firefox 11.0 and W7. When will you respond??

Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works find in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
A few other basic trouble shooting things you can try is this:
Run all Windows Updates, install all needed service packs, etc.
Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. you can uninstall this program after you clean off any infections.
Now when Firefox hangs, is this randomly, on specific websites, etc.? You can also read [https://support.mozilla.org/en-US/kb/Firefox-hangs https://support.mozilla.org/en-US/kb/Firefox-hangs]

We use Thunderbird all the time and love it, but for about a week it constantly goes into not responding mode. My boss uses the same service at home with no pr

Thunderbird is a great asset to my boss and I. We use Thunderbird all the time and love it, but for about a week it constantly goes into "not responding mode". My boss uses the same service at home with no problem at all.
I did an "safe mode" and restart and for a few minutes I thought it was "healed". However, I did a search and the same thing started happening again. The little blue ring starts spinning and "not responding" pops up above the toolbar. Sometime the screen fades to a sort of greyish and no mouse click are responded to, even to close Thunderbird.
Please help however you can. Our office number is 512.246.3995.
Thank you,
Mary

We wonder if it is a firewall problem that developed here at the office. My boss uses her account at home and all is well, but here, experiences the same issues I described

Can I modify standard program RFASLD20?

Hello experts,
I Get the modification option when I try to change the program RFASLD20. Can I modify the program?
I actually need to change the program at the FM FI_PAYM_FILE_OPEN , to add the Code page (unicode system).
Cheers,
Balaji

Hi Balaji,
I've never had a problem with the modification assistant not working. To modify a standard SAP report, you need a modification key from OSS. You should always use the modification assistant to record your amendments. Think carefully about whether there is another way of acheiving what you want -- perhaps using SUBMIT...EXPORTING LIST TO MEMORY, a couple of standard reports, and then merging them into yours.
You could copy the standard report, and modify the copy, but then you put yourself outside of SAP's maintenance and bug-fix track -- you might end up having to re-copy to incorporate new features. I'd always recommend modification over copying.
Thats all i can suggest........
Let me know if you need some help.
Manas M.

Unable to Modify standard program RAZUGA01

Hello abapers,
I am trying to modify the standard program RAZUGA01.This is using logical database ADA.In this I am adding two new fields .When I am trying to fetch data for the two fields from database tables based on the third radio button on selection screen(group totals), I am not able to get asset number which is getting converted to some other format.Kindly suggest me some solution.

Hi,
How you solved this problem?
I am facing the same problem.
Please reply.................
Regards,
Bala

Scheduled Program Does NOT Change Times with Guide Changes

When a program is scheduled from the Guide and then the Guide changes the start and end times, the scheduled program times do NOT shift AUTOMATICALLY with the Guide changes. Frequently the Guide program start and end times for a show move a minute, two, or three, sometimes more. The DVR scheduled program times do NOT keep up with these shifted Guide times but stick to the start and end times when scheduled. The DVR will often throw a yellow triangle up on the program indicating a conflict but the only conflict is with the Guide times. The DVR should AUTOMATICALLY shift the start and end times the few minutes and ONLY flag a conflict when the new times for the scheduled program conflict with another scheduled program, NOT with the Guide. This occurs most often on USA, FX, FXX, TBS programs which are frequently 61 or 62 minutes long. It is very frustrating to miss pieces of a recorded program, usually the end, because of these few minute time shifts.

Hello Venkata,
The components item category is TAE, that means the item category for the header item will be TAQ. Also the pricing will be carried out at the header item level only.
Now for your query:
The standard item category controls of TAQ will not have any connection between the header & the item level quantities in the delivery. If you change the quantity of the header item in the sales order, the quantity of the compnenets will be automatically adjusted. But this will not happen in the delivery with the normal settings of TAQ.
Solution:
Go to transaction code VOV7 - select TAQ - double click - In the Bill of Material/Configuration section , there is a field "Create Delivery Group" - select "X - Form delivery group with one delivery date".
Save the settings. Now create a new sales order & then create the delivery & try to change the quantity of the header item, the system will automatically change the quantity of the components. (the system may not change the quantity of the components in the delivery of the old sales order - change it manually)
With best regards,
Allabaqsh Patil.
Idhasoft Ltd.

Modified standard programs

How do i get to know which standard programs were changed. is there any utility object that i can use that will give me a list of modified standard programs

hi,
chk out these links ,u will get an idea
<a href="http://www.itcserver.com/blog/2006/07/11/standard-programs-that-every-abap-developer-should-know/">http://www.itcserver.com/blog/2006/07/11/standard-programs-that-every-abap-developer-should-know/</a>
reward useful points.
siva

How to - only display the price of approved PO (not change mode)

Hi,
Following are our PO release strategy
1. Release id : P has
a. Released indicator (tick)
b. Changeablity - 4
The above setup is working fine, means still after the approval users can change all the fields. New strategy is triggered once the values are changed.
Now the issue is business owner does not want the price, qty in change mode after approval. After approval ME22N to show
1. Price & qty to be in display mode
2. All other fields (except the one which affects PRICE) in change mode.
I tried to all the combinations, but after approval I get to see either all the fields in display mode or all in change mode.
Is it possible to display the price related fields only for the approved PO in ME22N.
Please advice
Thanks,
Raj.

Hi Mani,
Thanks for the fast reply.
1. There is no ME22N - Fsel Key available.
2. Only for the approved PO - we want the price fields in display mode.
3. There is no restriction required for the un approved POs.
Is there any way.
Please reply
Thanks
Raj.

Modify standard program

Hi all,
I have copied the standard program of table BSIP to an ZBSIp.
I wanted to add few more fields in the select opitons of this program . How can i do this,.
Regards
Priya

Search globally 'SELECTION' you will find where the selection screen are coded. add your select options there and modify the program logic accordingly to accomodate those selection criteria.

Iphone 5 slips into "VoiceOver" accessibility mode without that option being selected. Pain to de-select it.

My iPhone 5 with iOS 8.02 slips into "VoiceOver" accessibility mode, although I have not selected that option. Such a pain to de-select it.

Hey ptsch,
Thanks for the question. Your accessibility settings may be configured to enable VoiceOver via the accessibility shortcut (triple clicking the home button). You can learn more about the accessibility shortcut here:
Accessibility Shortcut - iPhone
http://help.apple.com/iphone/8/#/iph3e2e31a5
Thanks,
Matt M.

How to overcome the standard program check that changes my input file data?

Hi
when we r uploading PO thru bapi_po_create1, we give tax codes in the input file...but when the code gets into this MM06EFKO_PREISFINDUNG include of SAPLMEPO, there is a logic that changes the tax code (ekpo-mwskz = tkomv-mwsk1) and hence it gets reflected in the PO created...is there any way where i can by pass this one for the POs that i create thru my prog...pl shed some light on this
Sathish R

enter the program name in the SE38 editor
click on copy button
then it will ask you for the new name
when ever you click on the copy transfer buton
then it will raise a pop and saying that what ever you want from the program like
1) INCLUDES
2)SCREENS
3)USER INTERFACES
4)VARIANTS
5) DOCUMANTATION
ETC..
hat ever you clcik on that check box
thats all
rewar dif usefull

How to place a ABAP report program into a Change Request?

I used to create an ABAP4 report program, but maybe when I created it, I created it as local or $TMP that there is no any Change Request related to this program. Now I want to transport this program from Development to Test, how would create a Change Request that includes this program?
Thanks in advance!

Kevin,
Generally objects saved in a local package are not transported. You should always assign those objects to a change request and a developemnt class or package.
Copy your program in to a new program and assign that new program to a CTS and a package. Then you always can rename the new program name to the old programs name once after deleting the old program.
Thanks

Modify an MP3 but not change the "Modified Date"?

*Is it possible to update an MP3's ID3 tags (Artist, album artwork, album title, etc.) without changing its "Modified Date"?*
E.G. I have a song I downloaded in May 2006, I want to change it's ID3 tags, BUT I don't want its "Modified Date" to change from May 2006 to August 2008.
I like keeping the original "Modified Date" per every MP3 because it gives me a timeline of when I downloaded stuff.
E.G. "Hah, I downloaded that song back in May 2006? Crazy it's been that long!"
See what I mean? I know it might sound impossible, but hey, maybe?

spyderf22 wrote:
I understand that, but oh well, I found it myself and the short answer is yes, it can be done.
Depending upon how comfortable you are with Unix commands, this can also be done through the Terminal:
touch -t CCYYMMDDhhmm filename
Make sure to record the file's original modification date somewhere ahead of time to use in the command above.
Steve

Re: Modified Standard Program into Not Change mode without SSCR

Similar Messages

Maybe you are looking for