Re: MSI Command Center Not Working

Its a no go.I installed 1.0.0.95 and it does the same thing.On my other windows 7 partition where I have 10097 everything works fine.It used to work before on the one I am having proablems with,thing is it just stopped working all of a sudden and just ...

Tried to answer your post on Polish MSI forum but seems like while I was typing my internet went off
Try to put BIOS file (to be downloaded from product site on msi.com, make sure to download exactly same BIOS you had before it failed with upda...

Similar Messages

MSI Command center, was working, now crashes

Hi, I've been running Command Center version 1.0.0.50, and it's been working just fine, suddenly since yesterday it's been crashing shortly after loading, also the CPU always reads as max speed(3.7ghz) and doesn't move from there, whereas before, it was reading the correct frequency, I've tried uninstalling, and reinstalling from my driver cd, and it doesn't fix the issue, I've also tried version 1.0.0.68 from the website, and it's doing the same thing.
Also, just to note, other CPU frequency monitoring programs (CPU-Z for instance) are reading the frequency correctly, so I don't think it's a hardware issue.
Additionally, my Avast A/V has suddenly decided that the "msiwmiservice.exe" file from the 1.0.0.50 version is a rootkit(I've verified that it's a false positive), but I can no longer run the 1.0.0.50 version at all without disabling Avast, because every time I install it from the disk, it immediately throws the offending file into the anti-virus chest. This doesn't happen with 1.0.0.68, as it doesn't contain the offending file, but it still crashes the same.
Also, note that Avast and Command Center had been living together just fine for a couple weeks, right up until yesterday..... weird huh?
I'd like to be able to run command center for its hardware monitoring...... can anyone help me sort this out?
My system specs are
MSI H81M-E33 motherboard - BIOS version V6.4B3
Intel I5-4590 CPU

Try this one 0.69 Beta 2:
https://dl.dropboxusercontent.com/u/40094917/Command%20Center%201.0.0.69beta2.zip
before install it, deinstall the old one, then manually delete Command Center folder.
Then install the new one 0.69 Beta 2
after install and run it, when the loading error issue hapends,
go to local disk C in MSI folder, ie: C:\MSI
then locate a file named “MSILoading” and send it back. [upload it somewhere and give a link to it]
How to use forum features: https://forum-en.msi.com/index.php?topic=90789.0
Quote
Also, note that Avast and Command Center had been living together just fine for a couple weeks, right up until yesterday..... weird huh?
let us know if the "msiwmiservice.exe" service is still detected by Avast!
in latest Command Center version, if yes provide a screenshot with the issue

Z87 GD65 Command Center not works

I have Z87 GD65 motherboard (with i7 4770K and 2x8gb g.skill ddr3 2400). I have installed Command Center 1.0.0.8 and 1.0.0.15 but not works (appears loading.... forever!!! the application not loading) on Windows 8 x64 Pro.
Please solve this bug because I cannot use Ramdisk features and others features.

If not going to have any patience or try the suggestions, then why bother the users here for assistance?

Also got an issue with MSI command center, maybe windows is to blame?

MSI Command Center crashes every time after it's been running a little while, googling it I've noticed there have been a lot of topics about it crashing. I think someone here on this forum suggested reinstalling windows might help :/ Not too keen on that but better now than when I've installed a ton of stuff on the PC.
Actually both MSI command center and Intel extreme tuning utility crash for me. MSI command center crashes after a while it's been running and Intel extreme tuning utility crashes every time I click on the settings menu.
I wonder if something is still wrong with my OS, first time I installed windows 8.1 games crashed if they ran in fullscreen but ran fine in windowed mode. Later after reinstalling widows games started working fine, in fact I haven't had any crashes since (other than from these 2 programs).
Just yesterday I decided to make a bootable USB drive for windows 8.1 and I noticed that my PCcouldn't actually create an ISO from the windows CD cause the DVD drive couldn't read it properly no matter how many times I tried. My other PC managed to read the Windows DVD just fine, so managed to make a bootable USB drive after all. Donno how it managed to install windows at all, it did struggle a bit.
I wonder if doing a repair install or a completely fresh install of Windows now when my PC can actually read the windows installation media properly would fix these last issues.
Is there a difference between a clean install of windows and an install where it keeps all settings and programs? Think reinstalling windows a 3rd time would help (3rd time is the charm right?) Think reinstalling windows again would help?
Application: CommandCenter.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.ArgumentOutOfRangeException
Stack:
at System.ThrowHelper.ThrowArgumentOutOfRa ngeException()
at CommandCenter.Toolkit.CPUFrequency.<Timer_AnimationShowHW>b__0()
at System.Windows.Threading.ExceptionWrapp er.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHe lper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.DispatcherOper ation.InvokeImpl()
at System.Windows.Threading.DispatcherOper ation.InvokeInSecurityContext(System.Object)
at System.Threading.ExecutionContext.RunIn ternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Windows.Threading.DispatcherOper ation.Invoke()
at System.Windows.Threading.Dispatcher.Pro cessQueue()
at System.Windows.Threading.Dispatcher.Wnd ProcHook(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndSubclass.DispatcherCallbac kOperation(System.Object)
at System.Windows.Threading.ExceptionWrapp er.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHe lper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.Leg acyInvokeImpl(System.Windows.Threading.DispatcherPrio rity, System.TimeSpan, System.Delegate, System.Object, Int32)
at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
at MS.Win32.UnsafeNativeMethods.DispatchMe ssage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.Pus hFrameImpl(System.Windows.Threading.DispatcherFram e)
at System.Windows.Threading.Dispatcher.Pus hFrame(System.Windows.Threading.DispatcherFram e)
at System.Windows.Threading.Dispatcher.Run()
at System.Windows.Application.RunDispatche r(System.Object)
at System.Windows.Application.RunInternal(System.Windows.Window)
at System.Windows.Application.Run(System.Windows.Window)
at CommandCenter.App.Main()
Faulting application name: CommandCenter.exe, version: 1.0.0.82, time stamp: 0x542c7911
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17055, time stamp: 0x532943a3
Exception code: 0xe0434352
Fault offset: 0x00011d4d
Faulting process ID: 0x1764
Faulting application start time: 0x01cfe0e065a99cf3
Faulting application path: C:\Program Files (x86)\MSI\Command Center\CommandCenter.exe
Faulting module path: C:\Windows\SYSTEM32\KERNELBASE.dll
Report ID: 6fe5aaa5-4cd6-11e4-8264-448a5b9f9b8d
Faulting package full name:
Faulting package-relative application ID:

This issue isn't super important but I don't like programs crashing. None of the games I've played so far crash. (after I reinstalled windows once) Windows never crashes, and the PC has never crashed either so far.
Both MSI command center (version 1.0.0.82) and intel extreme tuning utility (version 5.1.0.23) crash. Both are kinda same type of programs it seems. MSI CC crashes sometimes immediately sometimes 15 minutes after I start it. The intel program crashes every time I click on the settings menu. MSI CC gives those errors when it crashes, the Intel program has no errors recorded in the event viewer when it crashes.
Board: MSI Z97 Gaming 5
Bios: Version 1.0 (Well that's what CPU-Z says it is)
VGA: MSI GTX 970 Gaming 4g
PSU: Asus 850W CP-850
Intel Core i5-4670K Haswell 3.4GHz (3.8GHz Turbo Boost)
MEM: Kingston HyperX Fury 1866Mhz DDR3
SSD: Crucial MX100 256Gb
HDD: Seagate Barracuda 2Tb
COOLER: Noctua nh-d15
OC: Everything stock (for now)
OS: Windows 8.1 64bit
I tried reinstalling windows by keeping all applications and settings, that didn't help at all. I could still do a fresh windows 8.1 install and remove everything, still I'd rather avoid doing that if I can. Maybe I'll just ignore the errors. Perhaps it's something related to the motherboard since both are these sort of OCing software.

Using msi command center vs bios to get 4.5

i7 4770k / 8 gig 1866 ram / msi z87 gd45 / 650 W psu / gtx 760 ...
going through bios setting for 4500 MHz I need to boost the cpu voltage to 1.25 + ( exact number I forget ) but... This is needed to even boot and run ...
However ,
if I boot to 4400 MHz I have the voltage to 1.050 and the machine boots and runs like a champ. (tech yes city video I saw and used those settings )
THEN if I go through the msi command center I can bump the cpu to 45 and keep the cpu voltage at 1.050 and it remains running strong and plays the games I play
without any issues.
just an observation but am happy I noticed this . now I can say I can run at 4.5

Quote from: not2intel on 26-April-14, 06:37:32
well , may have spoken too soon . tonight it didn't like the cpu boost without the voltage increase...
definately 4.4 on 1.050 works with everything thrown at it.
the 4.5 on 1.05 looks like it needs the voltage jump. ( for the .1 it's not worth it in my eyes to push more voltage to get that lil gain )
Yup! Wise decision!

Should MSI Command Center control MSI GTX 760?

I'm running the MSI Z87-GD65 MB with BIOS 1.8 and the MSI N760 TF 2GD5/OC with MSI driver 9.18.13.3165 along with MSI Command Center version 1.0.0.40.
The Command Center does not appear to be interacting with the GPU at all, the OC sliders are greyed out and the gadget reports GPU Freq of 0.
The card responds properly to Afterburner and works properly in all gaming and other PC apps.
So I think my problem is strictly with Command Center. Should I be expecting it to contol the 760?
Thanks in advance.

Quote from: tp6vul3rmp on 19-March-15, 16:07:31
Did MSI also have "APP" to control the command center??
I like MSI GAMING APP, that's very convenient!
yeah ~ hear it is:
android https://play.google.com/store/apps/details?id=com.msi.commandcenter
iOS https://itunes.apple.com/app/msi-command-center/id544222160

MSI command center freez

i have an x99 msi gaming ac 9 motherboard.
whenever i open msi command center it freezs on me all the time. the app open but won't let me click on anything or do anything. i have installed netframe 4.5 n all the driver on the m/b. also have uninstall n reinstall the app many time but still nothing would work.
this is what the loading log recorded.
[OS]
Bit=64
CultureInfo=English (Australia)
OSVersion=Microsoft Windows NT 6.2.9200.0
[Loding]
step=3
StartAP=ok
create=ok
service=ok
startTime=ok
createType=ok
createMB=ok
Frequency=ok
Ratio=ok
VCore=ok
DRAMFreq=ok
GPUMFreq=ok
createItem=ok
InitMB=ok
InitOCGnie=ok
Backgourd=ok
Temp=ok
GetWMIRequest_OSver1=Microsoft Windows 8.1 Pro
GetWMIRequest_OSver2=Microsoft Windows 8.1
InfoText_FromArgb=ok
InfoText_OS=ok
InfoText_BIOS=ok
InfoText_CPU=ok
InfoText_Model=ok
InfoText=ok
PageBar=ok
VSME=ok
LR_Arrow=ok
ThumbRight=ok
Tag=ok
DASL=ok
ASI=ok
CPUFreq=ok
CPUFan=ok
CPUVol=ok
Other=ok
MainPage=ok
SaveFan=ok
InitPage=ok
GPU=ok
RAMDisk=ok
OCGenie=ok

still not working. it freezes after loading
[OS]
Bit=64
CultureInfo=English (Australia)
OSVersion=Microsoft Windows NT 6.2.9200.0
[Loding]
step=3
StartAP=ok
create=ok
service=ok
startTime=ok
createType=ok
createMB=ok
Frequency=ok
Ratio=ok
VCore=ok
DRAMFreq=ok
GPUMFreq=ok
createItem=ok
InitMB=ok
InitOCGnie=ok
Backgourd=ok
Temp=ok
GetWMIRequest_OSver1=Microsoft Windows 8.1 Pro
GetWMIRequest_OSver2=Microsoft Windows 8.1
InfoText_FromArgb=ok
InfoText_OS=ok
InfoText_BIOS=ok
InfoText_CPU=ok
InfoText_Model=ok
InfoText=ok
PageBar=ok
VSME=ok
LR_Arrow=ok
ThumbRight=ok
Tag=ok
DASL=ok
ASI=ok
CPUFreq=ok
CPUFan=ok
CPUVol=ok
Other=ok
MainPage=ok
SaveFan=ok
InitPage=ok
GPU=ok
RAMDisk=ok
OCGenie=ok

MSI Command Center and OC Genie

I have an issue with the MSI command center. I know very little about overclocking and that's why i use the command center with OC Genie. Oc Genie raised my CPU to 4.10GHz and ram to 1600(was 1333). Everything went fine until about 30 minutes of game play where i kept on getting a blue screen. Did some searching and found out that it was because of the CPU Core Voltage. My CPU Core Voltage was 1.1 and changed it to 1.2 using MSI Command Center. It was fine the whole day/week. The issue is that the voltage never saves after each restart of the computer. I have to manually change the voltage each time i power on my computer. I tried to save/apply the voltage but it doesn't seem to save. Any idea how to fix this?
i7-4770K @ 3.50 (4.10GHz)
Z87-G43 Gaming MB
2x2GB 1333 (1600)
Geforce 650 ti boost 2gb
CX500 Power Supply

Dont use Command Center for OC. Use BIOS settings.
If you're not pro (or proper user) OC just a bit the multiplier in the BIOS. Software FAILS

Vcore Warning in MSI Command Center.

I tried using the OC genie on my MSI z87-g55 to try and run Dragon Age: Inquisition a little better, but didn't like the results and the strain (I think) it put on my comp. The reason I say strain is because in MSI command center I got a warning message that said "Vcore 1.776V" got a bit scared so I turn OC genie off... But yet I am still getting the warning in MSI CC.
here's a screen shot of it:
Here's my comp Info too:
OS Name   Microsoft Windows 8.1
Version   6.3.9600 Build 9600
Other OS Description    Not Available
OS Manufacturer   Microsoft Corporation
System Name   VINNIESRIG
System Manufacturer   MSI
System Model   MS-7821
System Type   x64-based PC
System SKU   To be filled by O.E.M.
Processor   Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz, 3201 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date   American Megatrends Inc. V10.7, 7/19/2014
SMBIOS Version   2.8
Embedded Controller Version   255.255
BIOS Mode   Legacy
BaseBoard Manufacturer   MSI
BaseBoard Model   Not Available
BaseBoard Name   Base Board
Platform Role   Desktop
Secure Boot State   Unsupported
PCR7 Configuration   Binding Not Possible
Windows Directory   C:\Windows
System Directory   C:\Windows\system32
Boot Device   \Device\HarddiskVolume1
Locale   United States
Hardware Abstraction Layer   Version = "6.3.9600.17196"
User Name   VinniesRig\VINNIESRIG\Vincent
Time Zone   Eastern Standard Time
Installed Physical Memory (RAM)   32.0 GB
Total Physical Memory   31.9 GB
Available Physical Memory   29.3 GB
Total Virtual Memory   36.7 GB
Available Virtual Memory   33.7 GB
Page File Space   4.75 GB
Page File   C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions   Yes
Hyper-V - Second Level Address Translation Extensions   Yes
Hyper-V - Virtualization Enabled in Firmware   Yes
Hyper-V - Data Execution Protection   Yes
I am also use a NVIDIA GeForce GTX 650 Ti graphics card.

under bios, does your Vcore still shows 1.7v? how about the vcore shown in Command center?
If problem persist, try to install the latest command center ?

Host command is not working on linux

Hi
I m using linux for application server n windows for client. I need to create folder from client machine by cliking a button of forms10g runtime.HOST command is not working which was working fine in windows.
Any help is appriciateable.
kazi mokarem

Hi
I had the same issue on linux a few weeks back. What tuned out was, when you install the Oracle app svr it does not include the system paths by default.
The path where mkdir is located may not be visible to the app.
Try to hardcode the path for mkdir as /bin/mkdir .... and seee if that works.
If the above statement works then add that path in the paths variable in default.env file located in $ORACLE_HOME/forms/server directory
HTH
Arvind

External command is not working in File Receiver Adapter

Hi,
   I have tried to copy the file which is mentioned in my File Adapter (Receiver) to 3 different folders thru OS command. The purpose is to save time. I have created one CC for Source(File) and one CC for target(File). After the target file is created, I want to copy this file in 3 folders. For this I have written one batch file in my system.
File Name: copy1.bat
@ECHO OFF
COPY %1 C:\TEST1\arch_t1
COPY %1 C:\TEST2\arch_t2
COPY %1 C:\TEST3\arch_t3
DEL %1
The command which I entered in the Receiver CC (File Adatper is)
Run Operating System Command After Message Processing
Command Line: C:\FILES\copy1.bat %F %f
Timeout(secs): 60
Terminate Program After Timeout - Check box is selected.
But, this external command is not working. (because the target files are not created in those directories C:\TEST1, C:\TEST2, C:\TEST3)
   I did this scenario by refering the Michael'w weblog:
/people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
   In this blog, he has also given how to troubleshoot external command. I tried this also. It is not working.
    I use Windows XP OS. XI 3.0 SP 18.
   Friends, Could you kindly tell why this external command is not working? What could be the problem?
Thanks in advance.
Kind Regards,
Jeg P.

Hi, Jeg.
As the note says, please check the java Runtime.exec behavior
with the proper user.
If in doubt, check if the command can be successfully run through
the Java Runtime.exec(...) API. Also note that the command is run
as user "<sid>adm" (Unix) / "SAPService<SID>" (Windows).
So, Could you check the following(very dirty one!) Java in your
XI server and check if it works? For simulating %F, create a test
file C:\FILES\test.txt whatever the content is.
import java.util.*;
import java.io.*;
public class ExecJava {
public static void main(String args[]) {
    try {
      Runtime rt = Runtime.getRuntime();
      Process proc = rt.exec("C:/FILES/copy1.bat C:
FILES
test.txt");
    } catch (Exception e) {
      e.printStackTrace();
Good Luck.
Sejoon

Why export audio to movie command not visible and detect cuts command is not working in 64bit mode?

Does anyone know why export to audio disappear from menu in 64bit mode?
Why detect cuts command is not working well in 64 bit mode?
I tested on several machines (brand-new iMac, brand-new MacPro with 10.8 OS, MacPro with 10.6.8),and everythig wotks in 32 bit mode. As I switch to 64 bit mode detect cuts only put one marker at the begening of film.
I also noticed that Firewire output option in 64bit mode is not avaible.
Is there a certain film format that I have to use to make it work? I tried DV PAL, but I had ther same result.
Thanks a lot.

Hi
Those functions are not available when Logic is running in 64bit mode
http://support.apple.com/kb/TS3171
CCT

6120 classic:My voice commands do not work

Please help.
Don’t know if I'm just being stupid or there is something not right with my 6120c.
My voice commands do not work.
If I press the button for a voice command, it says that there are no voice tags saved.
If I go into the voice command application (Which should create the voice tags on opening), I cant playback the voice tags, its give a 'voice system error' error message.
Is there something that is not set up properly? In the voice command settings, the synthesizer is 'on'?
Also, I don’t have voice tags on my contacts??
I read somewhere that this is a firmware problem and the phone should be taken back to nokia. Is this the case?
Somebody please help.

I formated my nokia n6120 using the code *#7370#. It deletes !everything! (settings, aplications...), but I have no voice sytem error now.

Java command still not working - please help

i have installed jdk1.6.0_05. The javac command works fine but the java command does not work at all. even when i try java HelloWorld i receive this exception message
Exception in thread "main" java.lang.NoClassDefFoundError: HelloWorld
Caused by: java.lang.ClassNotFoundException: HelloWorld
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
please help (you to SUN)!!

bart@kerberos:~$ javac -help
Usage: javac <options> <source files>
where possible options include:
-g                         Generate all debugging info
-g:none                    Generate no debugging info
-g:{lines,vars,source}     Generate only some debugging info
-nowarn                    Generate no warnings
-verbose                   Output messages about what the compiler is doing
-deprecation               Output source locations where deprecated APIs are used
-classpath <path>          Specify where to find user class files and annotation processors
-cp <path>                 Specify where to find user class files and annotation processors
-sourcepath <path>         Specify where to find input source files
-bootclasspath <path>      Override location of bootstrap class files
-extdirs <dirs>            Override location of installed extensions
-endorseddirs <dirs>       Override location of endorsed standards path
-proc:{none,only}          Control whether annotation processing and/or compilation is done.
-processor <class1>[,<class2>,<class3>...]Names of the annotation processors to run; bypasses default discovery process
-processorpath <path>      Specify where to find annotation processors
-d <directory>             Specify where to place generated class files
-s <directory>             Specify where to place generated source files
-implicit:{none,class}     Specify whether or not to generate class files for implicitly referenced files
-encoding <encoding>       Specify character encoding used by source files
-source <release>          Provide source compatibility with specified release
-target <release>          Generate class files for specific VM version
-version                   Version information
-help                      Print a synopsis of standard options
-Akey[=value]              Options to pass to annotation processors
-X                         Print a synopsis of nonstandard options
-J<flag>                   Pass <flag> directly to the runtime systemSee the bold part.
More information: [http://java.sun.com/docs/books/tutorial/java/package/managingfiles.html]

Command S not working in Dreamweaver CS6

Command S not working in Dreamweaver CS6

Every time I've run into an issue like this, clearing the cache file has repaired it...
http://forums.adobe.com/thread/494811
As long as it's not a system wide issue that is.

Re: MSI Command Center Not Working

Similar Messages

Maybe you are looking for