Re: MSI GS 60 Ghost Pro 606 Battery Below 91%, but says Plugged in Not Charging

I waited to 81%, plugged it in, and it started charging immediately o_o.  Well, it looks like it's working exactly as intended.

Quote from: flobelix on 01-August-15, 21:05:09Have you tried the card in another system already?
No I have done that yet.
But I'm now also getting artifacts. See the picture[attachthumb=1]

Similar Messages

  • Using hp pavilion 15 and it says plugged in not charging for battery

    hii am using hp pavilion 15 e053se with win 8 genuine. i m having problem with charging the battery. it says plugged in not charging. but in between it starts charging too..what should i do..?? 

    Hi Waleedahmed, Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion 15-e053se Notebook and having an issue with the battery. Here is a link to test and calibrate the battery. Here is a link to test the ac adapter. Hope this helps. Thanks.

  • Dv6928us: Laptop not running in Battery, '0% available, Plugged in, not charging' but fine in power

    Product No. dv6928us: Laptop is not running in Battery. Battery icon indicates, '0% available, Plugged in, not charging' even when the battery is inserted. But the laptop works fine in power mode.
    Battery check indicates: "The primary battery was not detected. Check to assure the battery is properly inserted then restart the computer'.
    Execution of this did not help.
    Can anybody tell me whether battery life is over or loose connection in battery placement?

    whoswho wrote:
    Product No. dv6928us: Laptop is not running in Battery. Battery icon indicates, '0% available, Plugged in, not charging' even when the battery is inserted. But the laptop works fine in power mode.
    Battery check indicates: "The primary battery was not detected. Check to assure the battery is properly inserted then restart the computer'.
    Execution of this did not help.
    Can anybody tell me whether battery life is over or loose connection in battery placement?
    Try updating The BIOS and then try it again. BIOS (latest): http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-62510-1&cc=us&dlc=en&lc=en&... If that fails to fix it, the battery will need replaced (if you want to) or ignored.

  • Lenovo P580 battery "plugged in, not charging" problem?

    Hi, I have a Lenovo P580 that is almost 3 years old, and I recently bought a new battery from Amazon to replace the original battery that came with the laptop. However, after installing the new battery, I can't get it to charge with the AC adapter plugged in. The new battery had a 60% charge initially. I currently have the battery setting in "battery fully-charged mode." The battery indicator light is red and flashes quickly, regardless of whether the AC adapter is plugged in or not (and despite having 60% charge). In the bottom right-hand corner of the desktop taskbar, the battery is recognized as being "plugged in, not charging." Is there a way to get the battery to charge? Or should I return the battery and get a different one? I really don't think the battery is the problem, but who knows. Thanks.

    hi MlodyDziura,
    Welcome to Lenovo Community Forums!
    Can you Verify that when the Computer is Plugged in and Turned on the battery icon on the lower right states that it is Plugged in not Charging.
          And how many Percent it says on the status.
    Thanks
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Aspire V3-771-6470, Windows 10: Installed new battery: 0% available (plugged in, not charging)

    I have: Aspire V3-771-6470 with 500GB SSD, 16GB RAM, WINDOWS 10.  Have had this laptop for about 3-4 years with no issues.  But, the battery had seen better days.  It lasting only 20-30 minutes.  So, yesterday, installed brand new battery and charged fully.  When I turned on laptop, battery meter shows "0% available (plugged in, not charging).  I researched on internet and have tried several of the "quick fix" approaches with no luck. What happened? Please help. Thanks.

    Has anyone tried a new power cord?
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • MSI GS60 2PE Ghost Pro 3K Edition

    Does the MSI GS60 2PE Ghost Pro 3K Edition have a backlit keyboard like the MSI GS60 2PE Ghost Pro?

    Taken from:
    http://www.msi.com/product/nb/GS60_2PE_Ghost_Pro_3K_Edition.html#overview
    "Keyboard by SteelSeries with LED back light and solid feedback design"
    I would assume that means it does.

  • DirectX 11 games don't work on MSI GS60-2PE Ghost Pro

    I have MSI GS60-2PE Ghost Pro
    Every game, that uses dx11 doesn't load. It just gives a black screen. If I try to launch the game on the intel hd graphics card, a game launches (with obvious lack of perfomance). I tried installing the latest drivers, switching to some old drivers, but it didn't help.

    ah your having same problem as me Alienizer my gs70 came back from repair with a broke GTX 870M that couldnt play anything on DX11 so to confirm this install futurmark 3DMARK 11 then tell me if you get this error DXGI_DEVICE_HUNG if it does then your GTX 870M is broken and you would have to send it to MSI Service where they can repair under warranty hopefully if your laptop is still new
    Update: this type of issue cannot be fixed by drivers switching or upgrading since issue will presist so this is mostlikely a failure in GTX 870M chip itself so yeah if futuremark 3DMARK 11 throws above error then i can confirm GPU of yours is dead it isnt doing preformace because it's broken.
    Update 2: Sorry i meant to say install Futurmark 3DMARK 11 then run a full DX11 test durring load if you see loadbar behaving weird like it becomes out of place and you see white dots above thats sign of GPU is failing so then aprox half way the bar will load but then freeze and shortly after it will exit and program will throw a window log with DXGI_ERROR_DEVICE_HUNG near bottom of log.

  • NO power on my MacbookPro: it all started with Battery of my MacBook Pro saying it was not charging (even if the pro was plugged) and it then switched off and now wont turn back on. There is no light on the magsafe and no startup noises at all.

    NO power on my MacbookPro: it all started with Battery of my MacBook Pro saying it was not charging (even if the pro was plugged) and it then switched off and now wont turn back on. There is no light on the magsafe and no startup noises at all.

    If you have Apple Care or your computer is still under warranty, give them a call and get a case number.  Otherwise, take the computer to an Apple store or an AASP.  Whichever is more convenient for you.

  • Plugged in, Not Charging MSI GX720

    I just bought my MSI GX720 less then a month ago, and just yesterday I was typing up some notes for school and I looked at my battery life and it said 96% plugged in but not charging. and I looked around online, some people said the battery is faulty or its old. But I have had this laptop not even 30 days yet. I read online that if I turned off my laptop took out my battery and then plugged in my laptop then put the battery back in it would solve it, I did that and it worked and i was able to charge to 100%. It worked fine all yesterday, but today again its stuck at 99% plugged in not charging.
    Can I fix this easily or will I need to act on my 1 year warranty and totally replace it?

    Quote from: Svet on 21-January-10, 01:32:50
    It's normal, it should start charging when it drops below 95%
    Ahh thank you, I was getting worried my battery was faulty already =) I am very relieved this is normal.

  • TS1365 macbook pro plugged in not charging

    my macbook pro complains plugged in not charging, i have changed different chargers and battery and still no solution to the problem

    Blair,
    Read through this knowledge base article on troubleshooting MagSafe and see that all is well with that part of the system.  Do you get the MagSafe LED when attached, and what color?  Does it show amber or does it stay solid green, or nothing at all?
    What does the battery condition show: apple menu, upper left corner of the menu bar, About This Mac, More Info, System Report, Hardware, Power - battery Condition, Capacity, Cycles and Voltage?

  • A135-S4527 Battery plugged in, not charging

    There are 1000s of posts on the net but no solution is working. I'm summarizing the problem for those who are already frustrated by seeing solutions in the following order and did not work, so please do not provide any solution mentioned below 1. charger/cord/plug/outlet not working 2. battery dated non working 3. battery contacts unclean 4. restart / push power switch for 30 secs etc There are many where any of the above doesn't work as permanent solution. Sometimes it seems as working but it doesnt last for longer. Now stating the problem of mine specifically My battery was gone. I knew that when this started. The issue was, even if the AC Adapter is connected and the battery is ON and detected, it would always say x% remaining (Plugged in, not charging) - where x is < 100% . This message is so frustrating (even now I'm seeing this and I need to post before the battery gets discharged) Why would a AC Adapter not charge when it is connected and battery is charged less than 100%? Even if lets say a battery pack is not holding enough charge, it should attempt to continuously charge if the charge is less than 100% This has started when I upgraded the laptop Toshiba Satellite A135-S4527 to Win 7. I've replaced the battery with a new one and only thing I can charge the battery is shut down and keep the laptop with battery connected with AC Adapter. Since last few days even the red charging LED has stopped showing up. I've found that the problem is related to "Microsoft ACPI Compliant Control Method battery" Have perfomed all sorts of instructions as given but none works Funniest part is when this message is on and battery is not charging while AC Adapter is connected, it is still drawing power off the battery as the % goes down and it simply knocks off when battery is fully discharged, completely ignoring that the AC Adapter is connected (Yes, it is connected as you can see the icon with the pin) I'd stop here for some advise before this goes off again. Thank you so much for your attention
    Solved!
    Go to Solution.

    This method did not work for me.  I found a Youtube video that shows 12 steps to follow.  It worked.  https://www.youtube.com/watch?v=Lx62t6qZ34U

  • Plugged in not charging battery wont power laptop

    hi
    my laptop is showing plugged in not charging the battery is at 46% constantly but if you unplug the power source the laptop instantly powers off and will not start up on battery power normaly if the battery is dead the power button will flash when you try to turn it on
     done a battery test and come back ok
    reinstalled the driver
    laptop only a few months old  

    Hi greg0202, welcome to the HP Forums. What is the model number of your notebook? What version of Windows is installed?
    Guide to finding your product number
    Which Windows operating system am I running?
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • My ipod will only charge on the docking station. says it has a full charge but when I take it off the docking station it says battery is low so I've plugged it into the usb and plugged it into my wall outlet but it is still not charging. Help?

    my ipod will only charge on the docking station. says it has a full charge but when I take it off the docking station it says battery is low so I've plugged it into the usb and plugged it into my wall outlet but it is still not charging. I'm not sure what generation it is, its an 80GB. Help?

    The battery is possibly unable to take as much power as a normal battery. It may need a replacement battery.

  • I was updating google translate on my phone then the screen just black out. I thought battery went flat but after I put on charge, it's still not working. Please help!

    I was updating google translate on my phone then the screen just black out. I thought battery went flat but after I put on charge, it's still not working. Please help!

    Hello 74birdy
    The article below will assist with troubleshooting your iPhone not responding.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I have a MacBook Pro and it starts up but the screen will not come on - any suggestions?

    I have a MacBook Pro and it starts up but the screen will not come on - any suggestions?

    The simplest operation your Mac can do is start up with the Option key held down. The code is all in ROM. It uses a One size fits all resolution to light up the display and draw an icon for each potentially bootable Volume.
    The most effective thing your Mac can do when confused is to start up using the Shift key. It does one pass of Disk Utility "Repair Disk" then boots up with minimal extensions loaded and ask you to login. But if your Mac is really sick, it may never get there.

Maybe you are looking for

  • Error on uploading app for App Store submission

    Hi all, We're trying to upload a new version of our app - an update - but we keep getting errors which are very odd. The Application Loader app informs us that we're trying to access the UDID through the app and using non-public APIs. Both of which w

  • Can we open Delivery Tab in Purchase requisition as like in Purchase order

    Hi, Generally we have Delivery tab  in Purchase order under item level data, where one can schedule the total quantity to more than 1 time lines with different quantity. E.g in P.O line item quantity is 500, and i can maintain it in 3 lines under del

  • Can I get  Vendor Account Group & Cost center from PAYEXT Message Type?

    Hi Everybody, I am getting all the IDOC's of message type "PAYEXT" fro EDIDC & EDID4 tables. But will these IDOC's will contain Vendor Account Group & Cost Center ? If so could you please let me know the Segment & corresponding fields. Thanks & Regar

  • DNS + do I need a diradmin account?

    I have a 10.5.8 server currently being used as a file server for 8 Macs. It is behind a NAT router so is not accessible from the Internet, and doesn't need to be. E-mail and website is handled by a hosting company. All computers have manually-set IP

  • Tips required for SAP XI online training from SAP eductaion partner?

    Hi, Recently I have registered for SAP XI course through online from SAP education partner. I would like to have some advice/share some experience to me for taking the online course effectively am a working person and will be able to spend only 2.5 h