Re: MSI GS30 Laptop - Issues since latest BIOS Update vE13F1IMS.105

Can I get a copy of the 104 BIOS also? I tried the link and it asks for a password now. I too just recently updated to the new BIOS and now my video is not showing properly on my external displays. I am only using one docking station with an R290 vid...

Just... why resurrect old topic? Open new thread if you require help.
>>Please read and comply with the Forum Rules.<<

Similar Messages

TS1398 wi-fi issues since latest iOs update

Since I updated my iPhone 5 to the latest iOS version 6.1.4 (10B350), I have experienced several ongoing issues with Wi-Fi connectivity.
Is anyone else experiencing issues?
For example,
I can no longer get a stable wireless connection from my bedroom or bathroom in my flat, whereas I previously had full strength and access to the internet. I have checked with my ISP and there are no issues with broadband in my (small!) flat and my wireless router is working perfectly.
The wireless connection drops occasionally, both in my flat when I am connected and also when I am out and about.
This change immediately happened once I updated my iOS to the new version 6.1.4 (10B350).
Any thoughts?

Restore iPhone with iTunes on computer, Restore is different than Update. If the problem persists after the Restore, make Genius reservation or set up service and take or send iPhone to Apple for resolution under Warranty.

X240 will not boot after latest bios update

I bought windows 8 .1 machine from factory. Then I had local shop install 8.1 on larger ssd. I just performed latest bios update and now machine will not boot. I am sure this is uefi related but I am not knowledgable in that area. The boot parameter returned to me by the shop was "legacy only" and secure boot was disabled.
Solved!
Go to Solution.

StanFan wrote:
I bought windows 8 .1 machine from factory. Then I had local shop install 8.1 on larger ssd. I just performed latest bios update and now machine will not boot. I am sure this is uefi related but I am not knowledgable in that area. The boot parameter returned to me by the shop was "legacy only" and secure boot was disabled.
Since doing the BIOS update are the settings still as you noted above? You also didn't mention which SSD is now installed in the system.
Just as an aside, installing Windows 8.1 in legacy mode isn't exactly optimal. Were there any particular reasons for this? Just being curious.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Boot Fail after latest BIOS Update on Flex 2-15D

Hi everyone,
I have a severe problem (I guess) after the latest BIOS Update. Windows 7 freezes during startup.
I own a 64-bit Lenovo FLex 2 15D with AMD A6-6310 and R4, 4GB RAM and a SSHD (8GBSSH). I purchased it without OS and installed Windows 7 - which worked fine so far.
I yesterday updated the BIOS with version 9FCN23WW (for Win7 and Win8), the latest BIOS update. A mistake, it seems.
After Reboot, I first had to disable Secure Boot in the BIOS, because it would not let me boot at all. I figured out how to get into the BIOS-Setup to disable this (press Enter 2x, press Tab when in the Boot Menu to access the "Apps Menu", then "SETUP" - just in case this helps someone).
Now Win7 begins to start up, but freezes during the startup process (the splash screen with the win flag freezes and looks a bit strange. I used the "protected mode" Windows Startup and saw that the process always hangs when loading "amdkmpfd.sys".
That is basically it.I guess I have to find a way to re-install the previous version of the BIOS, but I have no idea how!
Any idea?!
Now about what I did to fix this (poor, but I tried):
If I try to start from a Win7 installation CD-ROM (actually it is one for Dell PCs, but I guess that is not the problem) and press a key to boot from CD, Windows loads files, shows "Starting Windows" and at a certain point again just freezes. When I -do not- press a key, WIndows Boot Manager shows up and mentions that "Windows failed to start (etc.)" "File: \EFI\Microsoft\Boot\BCD" "An Error occurred while attempting to read the boot configuration data."
I can't even boot into Linux on a USB stick, because the Windows "Error Recovery" (translated from German, sorry - my guess) won't let me when I try (just offers to boot to Win7 in protected mode - it could be that it fails immediately and jumps back to Win Startup).
Thank you for every bit of help!
Tristam
Solved!
Go to Solution.

I found our the solution to my problem with the help of SebastianLenovo ...
In the BIOS / Boot Mode, I switched back from "UEFI" to "Legacy". That's it. That simple. The BIOS Upgrade routine just did not transfer that setting from the old BIOS to the new.
Given the fact that 1. I did not change that setting, so it is default and 2. it would have been easy to avoid, if the BIOS update routine would be well programmed to transfer the current BIOS settings to the new, upgraded BIOS ...
Anyway a strange situation that a 64-bit system has a 32-bit BIOS. Actually no Linux distribution (except FatDog and rescue systems) are able to deal with it - Linux only running as a Virtual Machine under Windows. I think this is inappropriate and really taking away a part of the fun if you can not run this laptop as a dual boot system.
Thanks to Sebastian and I hope this solution helps someone in the future...
Regards, Tristam.

Problems Receiving Emails and some data on WIFI since latest software update.

Problems Receiving Emails and some data on WIFI since latest software update.
My blackberry torch will not receive emails on wifi since the latest software update, I've tried numerous wifi networks and several handsets, even had them replaced and received a brand new. Still the same problem.
When turning off the wifi network on the torch, the phone will stall for 5-10min while it tries to communicate with the network (vodafone) to receive outstanding emails and data.
Can someone please inform Blackberry and get a quick fix on this

Sounds like you have Do NOt Disturb turned on.
settings - do not disturb - off

Since latest ios update, my iphone 6 loses my ringtones. I download new and that's gone the next day too

Since latest ios update, my iphone 6 loses my ringtones. I download new and that's gone the next day too. How can I get my phone to keep my ringtones?

Most USB port do not supply enough current to charge the iPad.

Since latest Firefox update, other web sites will load but Netflix will not. Netflix will load in Internet Explorer.

Since latest Firefox update, other web sites will load but Netflix will not. Netflix will load in Internet Explorer.

Does it matter whether you use www? Will the sign-in link open: https://signup.netflix.com/#do-login
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
1. Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server. Any difference? If not...
2. Clear Firefox's Cache Completely
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
3. If needed, remove the site's cookies in this dialog
While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?

D20 - latest bios-update (61j938usa.iso)

Just an info,
the latest bios-update caused the back-fan of my system (4158) keep spinning to fast. It didn't throttle down when Windows started. Front-fan was ok. Changing the fan-speed in the bios and even resetting it didn't helped.
Returning to 61KT37A solved it.
Solved!
Go to Solution.

This is a BIOS bug introduced in BIOS 38A, and I've been able to reproduce the problem on my system as well. Should be fixed with 39A when it gets released.
No real harm in running 38A, it's just a little noisy for the time being.

REQUEST: Latest BIOS update for MSI GTX 970 Gaming 4G card

Hi, I'd like the latest BIOS version for my MSI GTX 970 Gaming 4G card. I don't know what the serial number is, I don't have the box anymore. I've attached my BIOS file I saved through GPU-z. Thanks in advance!

Quote from: Nichrome on 07-May-15, 04:01:10
Hi
Check graphics card itself, should have a sticker with S/N. Else it might be hard (or impossible) to provide correct vBIOS.
Thanks! S/N: 602-V316-09SB1410116XXX

Laptop Internet speeds decrease because of latest bios update.

Hi
I just recently updated my bios to version f 33 and now my internet speeds with this laptop are going up and down randomly each and everytime.
The speeds with my other devices connected are just fine so no problems with my wifi.
I tried to downgrade to the previous f12 but it says i cannot due to "BIOS update is not allowed on this device due to security policy set by the BIOS admn"
Please advise.
Thanks,
Chris

Any help?

Performance issues with latest iTunes update

Hello everyone,
I'm having somewhat of an issue with the latest update for iTunes (10.5), ever since the update was installed the 'AppleMobileDeviceService.exe' is using all my processing power.
Now I know my laptop isn't the latest spec, but before this was never an issue. The only way I can still work with it is when I turn off the service via the Task Manager.
When I launch the iTunes programme it gets even worse, another service called 'APSdeamon.exe' is eating up the processor aswell, albeit they both consume 50% now. As a result I cannot access the iTunes Store or do much else.
I do have to mention all my music is stored on an external HDD which is connected via USB to my laptop, but this was never any different.
I've reïnstalled all Apple components twice already, one including a specific deletion of all Apple program folders manually.
Since I can always turn off the services manually it isn't a big issue, but does anyone have any suggestions or ideas how this could be resolved?

Hello Mauricio,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M.

MSI 4G 970 GTX OC Edition - Bios Update Request

Good morning. Since NVidia isnt doing much to rectify their issues I thought I would seek out some help on the MSI Gaming pages to see if I could update the bios to my card and it may relieve some of the GPU card usage issues. So rather then tag on someone elses thread I am asking for assistance to ensure I use the right BIOS updates and instructions so I do not damage my card. Any help is appreciated. Thanks.
My symptoms from my card are pretty standard like the rest of the 970 GTX series owners. Some freezing or screen stutter occasionally, and low usage of the components.
In addition one of my older games is unable to use the 4G of VRAM properly and the screen locks up and the game crashes. That game is about 12 years old now so I am not to concerned if this issue isnt resolved.
My info:
Card Serial #: 602-V316-10SB1411120807
Model: MSI 970 GTX OC Edition
FX 8350 w/H60 Liquid Cooler
ASUS Crosshair V Formula Z Mobo
32 GB G. Skill RipJaw @ 1866
Thermaltake 750W Modular PSU
MSI 970 GTX OC Ed.

What does .193 do for me? Does that address the VRAM issues or the Low GPU usage issues present in the 970 chipset?
I just pulled the 970 from my rig for now. When NVIDIA makes some statements and then MSI on what if anything can be done I might put it back in. At this time though I feel like I need to just wait it out. The card causes me problems with a 12 year old game when i dont cap the memory usage. That shouldnt be happening, when on my 7870 which only has 2 GB of memory has none of the same issues on the exact same game.

MSI DKA790GX Platinum and AM3 CPU - BIOS Update

Hi,
I am going to upgrade my current computer from an older AMD socket 939 setup to an AMD Phenom II based system
I am thinking of the MSI DKA790GX Platinum motherboard and AMD Phenom II X3 720 (Black edition) CPU (AM2+ Motherboard and AM3 CPU), but I need to clear up the BIOS update for AM3 issue before buying the components.
The motherboard advertisement states that the BIOS has to be upgraded to support AM3 CPU
My issue is this: I do not have an AM2/AM2+ CPU, and I am looking to jump right into buying an AM3 CPU - so will the unit power-up/POST with the combination of the newer AM3 CPU and older BIOS to allow me to update the BIOS using either FDD or Bootable USB Pen in a DOS environment?
Does anyone have any knowledge or experience of this? Any help on this would be appreciated
Thanks

Quote from: Scottike on 12-April-09, 00:18:13
The 1.74 Bios is one I got from MSI tech support. We're trying to work through a problem with my new board. nothing major, but we're not quite there yet.
I know that Nvidia was The chipset to have for several years, but I think AMD has upset that applecart a bit with the 780 & now 790 chipsets, and with Intel
getting into the chipset game as well, Nvidia could see some rough times ahead. They may even end up dropping out of the chipset game, since Intel's new CPUs have the memory controller built on die. Hence, Intel has no real need for NVidia any more, Nvidia may end up just focusing on the video card market, unless?
My board defaults to 800mhz as well and I'm running a 720. You have to keep in mind that they have to make the boards default to the lowest common denominator as not everyone runs 1066 capable memory on their board (even though Manufacturers may spec the memory so). I also have to manually bump up the voltage, as well as timings and ratio for 1066. But, my Mushkin ram plugged in and booted with no problems, but I did have to bump up the voltage and tighten up the timings even at 800.
Interesting (Abut BIOS version 1.74). I guess it is not yet available for downloads.
So now Intel CPU's have the memory controller on the die (just like AMD). So does this prove as an advantageous concept? I expect Intel to implement better memory management than AMD. AMD drops speed when all 4 memory banks are occupied... what is the use of utilizing max RAM capability if memory controller cannot sustain the max RAM speed?
I may agree with you on the concept that motherboard should support the lowest (RAM) denominator...
However if someone uses lower than 1066 MHz sticks, system should detect accordingly, and when 1066 sticks are used, auto-detect as 1066... I still do not see the issue here. On former nVidia based boards like my MSI K9A Platinum SLI (with an AMD X2 CPU), 800 MHz modules are detected as 800 on auto, no need to manually tweak anything in BIOS. I still have to see an nVidia EPP profile enabled board which is claimed to auto detect 1066 MHz capable memory sticks by default.
On my system it is also the same... I have to up the RAM voltage to 2.2V (otherwise system is not stable), as well as setting up the timings and of course the RAM/FSB speed ratio to 1:2.66.
I am running currently 4 chips of OCZ platinum 2 GHZ (for a total of 8 GB RAM, for 64 bit Vista and Linux). Also with mine (as we know Phenom II does not support 4 sticks of 1066 MHz) it drops to 800 MHz. As well as, I needed to bump the voltage to 2.2 V... otherwise in the middle of operation, system reboots. We know what this is about, dont we ?

Issues with latest itunes update?

i been having issues with the latest itunes update. i did the update but during the final installation something happened and i keep gettng a message telling me "library runtime error" or something of the sort. i deleted any and all apple from my laptop and tried reinstalling only to hav same problem. then i did a system restore to se if that would help and still had same problem. now i have itunes installed in desktop also and the same update reminder popped up and i am reluctant to do the update there for fear of the same thing happening to that as well. wondering if anyone has encountered this issue in the past and how did they resolve the problem. any and all advise is welcome.

Hi cesanchezfromut,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

Can't shut down since latest Software Update

Software Update failed, see thread on following post:
http://discussions.apple.com/message.jspa?messageID=6866395#6866395
Basic summary - Software Update wouldnt install latest Security & Safari updates. I managed to verify & repair my disk using Disk Utility. Software update still didn't work, so I downloaded latest security update & safari 3 manually. Restarted ok.
However, I now can't shut down my laptop. Apple Menu > Shut Down just doesn't work. Nothing happens. Same with Restart or Force Quit. Sleep is working fine.
To shut my computer down now, I have to press & hold the on/off button.
This has happened a few times over the last couple of years, but since latest update its constant, have to force shut down every time. Disk is verified ok by Disk Utility.
Not keen on doing a full OSX re-install just yet, so any ideas?
Cheers
Brad

HI B Real,
How much free drive space do you have on your PBook? If it's less then 15%, that could be your answer. The easiest way to find this information is to open a Finder window. At the bottom of that window the free drive space will be displayed. If it's 15% or less... that could very well be your culprit. Transfer files to an external drive/iDisk/iPod, or CD/DVD's if your PBook has a SuperDrive.
Also, maybe your Software Update preference file is corrupted. Try this... locate this
file: com.apple.softwareupdate.plist It's here: Home/Library/Preferences. Open the Preferences folder, locate that file, drag it to the Trash, empty the Trash and reboot.
I hope something helps...
Carolyn

Re: MSI GS30 Laptop - Issues since latest BIOS Update vE13F1IMS.105

Similar Messages

Maybe you are looking for