Re: MSI GTX 970 4G making unhealthy noises

Have you tried any other games?

Quote from: Nichrome on Today at 21:26:53PSU sounds good enough (Corsair). Though, are you able to test different PSU?
Try to enable V-Sync in games (or even in nvidia driver) and see if it whines then. It's commo...

Similar Messages

MSI GTX 970 4G making unhealthy noises

I've recently upgraded my computer a bit, and recently my graphics card has been making some rather unhealthy-sounding high-pitched whining noises whenever I play games. It's definitely not the fans, because I checked with my case part-open to listen, ...

Quote from: TZBC on 06-January-15, 10:05:14I think this guide is for older AMD motherboards.
For newer one, don't forget to set “Board SATA RAID ROM” from Legacy ROM to “UEFI DRIVER” after STEP 2.
[img]http://i.imgur.co...

MOVED: MSI GTX 970 Gaming 4G + MSI Z87-G45 incompatible? Noise on speakers

This topic has been moved to MSI Intel boards.
https://forum-en.msi.com/index.php?topic=184068.0

Used hardware
MSI GTX 970 Gaming 4G (+ RMA'ed new one)
Gigabyte 670 GTX Windforce
MSI Z87-G45 Gaming motherboard (with Intel i7-4770K, Corsair Vengeance Pro 16GB, and Crucial M500 - 480GB SSD)
Asus P5N32-E with Q6600 and 8GB DDR2 (Going to test this)
SoundBlaster-Z Audio card
Roccat Kave 5.1 Gaming Headphones (4x 3.5 mm jacks: Front, Rear, Center&bass, Microphone + USB amp/volume control)
Corsair B600 (600W) PSU (secondary)
Corsair RM750 (750W) PSU (Primary)
To summarize
Corsair RM750 + MSI Z87-G45 + Gigabyte GTX 670 + Roccat Kave = really faint noise only when scrolling in browser, in game not heard
Corsair RM750 + MSI Z87-G45 + MSI GTX 970 + Roccat Kave = in game loud and heavy noise + screech when scrolling in browser
Corsair RM750 + MSI Z87-G45 + MSI GTX 970 + Soundblaster-Z + Roccat Kave = In game moderate to heavy noise
Corsair B600 + MSI Z87-G45 + MSI GTX 970 + Soundblaster-Z + Roccat Kave = In game weak to moderate noise
Corsair B600 + MSI Z87-G45 + MSI GTX 970 + Soundblaster-Z + Roccat Kave with Mic disconnected = Almost no noise, ifg you listen for it, really faint background noise in game. But well within my acceptable limits.
Tomorrow I'll try:
Corsair B600 + MSI Z87-G45 (onboard sound) + MSI GTX 970 + Roccat Kave without mic
Corsair RM750 + Asus P5N32-E (onboard sound) + MSI GTX 970 + Roccat Kave with mic
I failed to mention, that the first thing I did was to remove my HD Audio Front panel connector off its header.
So I did some more searches. The noise has something to do with the capacitors on (presumably) the video card. The higher the pitch usually coincides with higher FPS. So the interference must be coming from the video card, as this is the last thing added and probably the main cause.
Both the motherboard & the SoundBlaster-Z pick up the EMI/RF interference. (I am disappointed by the SoundBlaster about this).
I'll test with the older motherboard and see how I proceed from there.

REQUEST: MSI GTX 970 Gaming 4G original bios

My S/N is 602-V316-03SB1409075224 I would like to request the original vBIOS that my card came with.
My card had problems with the fans randomly spinning and so I updated to the appropriate bios which was NV316MH.182 and that fixed the problem. However I have noticed since updating that the noise from the card has increased when playing games and today whenever starting any game I get an instant crash and my whole system resets, this happens now even when I'm not playing a game and my computer has been randomly restarting and I know it's a problem with the GPU.
I am worried that it is most likely that the GPU is failing but I would like to try flashing the card to its original stock vBIOS and seeing if that fixes anything. Even if you don't believe the vBIOS is the problem, I would still very much like to have the stock vBIOS for my card. Thanks!
I'm on windows 8.1 64 bit.

Quote from: Svet on 04-December-14, 14:56:25
list full detailed system specification, see >>Posting Guide<<
which version was this?
Board: Asus Z87I-Pro
Bios: Version 1003
VGA: MSI GTX 970 Gaming 4G
PSU: Silverstone SST-ST65F-G Strider 650W Full Modular Power Supply single +12V rail with 54A
Intel Core i5-4670K Haswell Quad-Core 3.4GHz LGA 1150 84W Desktop Processor
MEM: 8GB (2x4GB) 1600mhz Corsair DDR3 Vengeance Jet Black Low Profile, PC3-12800, Non-ECC, CAS 9-9-9-24, XMP, 1.5V
HDD: Samsung 840 Series 250GB 2.5 inch SATA Solid State Drive
COOLER: cooler master hyper 212 evo
OC: none
OS: Windows 8.1 64 bit
S/N for the GPU is 602-V316-03SB1409075224 current bios version is 84.04.2F.00.F1 which was downloaded from https://forum-en.msi.com/index.php?topic=184740.0 and I used NV316MH.182
I don't know what the name of the vBIOS I updated from was, but it was the stock version that came with the card so most likely the vBIOS before the one I'm currently using which was downloaded to fix the fans randomly spinning.

Msi gtx 970 Fans Randomly Turning On When Idling???

So basically I have had my msi gtx 970 for a couple weeks and the fans seem to behave as normal? Now once when I was idling I noticed the fans spin up and immediately spin down straight away. So basically now every 30 seconds the fans will spin up and spin straight back down which is weird. The temps are fine and I have checked this using MSi Afterburner. The fans I'm pretty sure are meant to stay off under 65 which it is so why are the fans spinning up. I don't seem to notice it noise wise but I don't know what it is happening. When I check the Fan % in Msi After Burner it doesn't log the fan ramping up but the 'fan tachometer, RPM' section shows it going up and back down, I will link a picture of this. I will link you the youtube video which I highly reccomend watching for a better idea of what's happening. I show you it spin up once and back down then a waiting period and then it doing it again.
YouTube Video:
Msi afterburner, Fan tachometer section: http://i.imgur.com/gchIHhF.png

Quote from: rwcordell on 05-November-14, 04:05:25
I may have found a problem with MSI's fan settings on these cards.
Is this the problem? I don't know. But it does not seem to be set correctly IMO.
As you can see below the fans with the OEM bios are never actually set to 0 rpm. When they are off they are actually being told to spin at 1% power at 23 rpm.
I have changed mine.
The fans no longer randomly spin with the new drivers. And I have not had any more problems with one fan not spinning up ( although its too early to declare victory on that problem ).
My fans now start up at 50c and even when overclocked to 1503MHZ I have not gone over 65c at 68% fan speed.
Went ahead and copied your settings and everything seems to be working as it should now. Thanks
**EDIT**
Just tested it by getting gpu up to 50c and it seems to work. After it drops below 50 it takes a bit for the red fan to spin back down (stayed around 44% for a good 3-5 mins). After the red fan dropped to 0% the black fan slowly dropped down to 29% and that's where it is sitting right now. I think this is per design though since I remember my gpu doing this even on .16. The cooldown process or something I guess.
And at the end of this post black fan is back down to 0%. Good call on the problem looks like it's fixed .

B2 Error with new MSI GTX 970 :(

Hi there team!
Just registered to try and get help. I spent around 6 hours researching + trying all the suggestions throughout many different forums, but the B2 error still persists. I am currently running the following spec:
Mobo - MSI Z68A-G43 (G3), with version 4.30 ( I flashed bios last night and still no help)
CPU - Intel® Core™ i5-2500K Processor, 3.5GHz etc.etc.
RAM - Corsair Vengeance 2x4gb at 1333MHz
GPU - MSI GTX 970 GAMING Twin Frozr V 4GB GDDR5
PSU - Cooler Master Silent Pro 700W
I have tried:
-Taking out the card and using the on-board graphics to flash the bios to later version, No help. (during this process, the B2 error does NOT show up)
-Upgraded the card to latest nVidia drivers, even uninstalled and re-installed them. No help.
-Upgraded all the drivers from MSI, i.e. chipset etc. through Live Update 6. No help.
When the card is in, I cannot even access bios, it just gets stuck at B2 screen for like a minute, and then carries on with the boot process. I am able to play games etc. after the booting, but this error for sure should not be there when the PC boots up. I didn't have any issues with my old GTX 560 TI. I've read different forums saying that it might have something to do with the mobo thinking that something has to be connected to the on-board graphics; or that flashing BIOS helped a lot of users, but not me :(.
I don't have a second PC to test the card on.
Literally, I would try anything, please someone just help :(( This card is a beast and I wanna be able to properly use it and not having to worry about this error.
Thank you very much guys, hope someone can help!

Quote from: gabe_dimitrov on 08-February-15, 20:40:51
Man thank you so much! It is finally working!!! Thank you!!!! ))) It is showing correct version in BIOS, does not show B2 error whatsoever, all done! )
Thanks for your time! You can close thread, but it's very useful for anyone that has this issue!
Wich version of BIOS do you have installed? Can you OC your processor with new BIOS?

MSI GTX 970 not being detected on first PCI-E 3.0 slot of MSI Gaming 5 motherboa

Hi guys.
So I recently got myself a new build and some of the components include a MSI GTX 970 Gaming 4G GPU and a MSI Gaming 5 mobo. When installing the GPU to the motherboard I found that for some reason nothing was being displayed on the screen. The screen wouldn't display a no signal message but it would stay black when I booted the PC up. However, when I plugged the GPU into the 2nd PCI-E 3.0 slot it would work and display on the screen. I read on a Tom's Hardware thread of someone with a similar problem and it was recommended to him to check his CPU for bent pins and he later confirmed that was the problem. I have tried the same, but as far as I can tell all of the pins were in their natural state and couldn't find any bent ones.
But I also discovered something else which really started to confuse me... When I plug in my old GPU (a Gigabyte GTX 560 Ti) into the first PCI-E 3.0 slot, it would work normally?! Why would it work fine with my GTX 560 but not my GTX 970?? I have tried everything. Even stripping the pc down to the most basic parts on a wooden surface and tested everything but it's still the same problem. I have also made sure that the display setting in the BIOS is set to PEG, but it would still not display anything when the GTX 970 is in the first slot, but if I plug the HDMI cable directly into my motherboard, even with the GTX 970 installed on the first slot, it would display normally. Also, in my BIOS it doesn't even detect anything being in the first PCI-E 3.0 slot in the Board Explorer menu. But when I installed it in the 2nd PCI-E 3.0 slot the Board Explorer menu would recognize it, but would say it's running at x8 and not x16. Should I be worried about this?
My full setup:
MSI Gaming 5 Motherboard
Intel i7 4790K
MSI GTX 970 Gaming 4G
Kingston HyperX 1333Mhz 8Gb (2x4Gb)
Corsair RM 750 PSU
Corsair H80i CPU cooler
Any advice from you guys on what to do or what the problem could be would be greatly appreciated!

remove power cord from the PSU and do >>Clear CMOS Guide<<
also reseat the card into PCI-E slot 1 and make sure its fill very well into the slot
Quote
MSI Gaming 5 Motherboard
full model is..?

REQUEST: Latest BIOS update for MSI GTX 970 Gaming 4G card

Hi, I'd like the latest BIOS version for my MSI GTX 970 Gaming 4G card. I don't know what the serial number is, I don't have the box anymore. I've attached my BIOS file I saved through GPU-z. Thanks in advance!

Quote from: Nichrome on 07-May-15, 04:01:10
Hi
Check graphics card itself, should have a sticker with S/N. Else it might be hard (or impossible) to provide correct vBIOS.
Thanks! S/N: 602-V316-09SB1410116XXX

MOVED: REQUEST: MSI GTX 970 Gaming 4G original bios

This topic has been moved to GAMING Graphics Cards.
https://forum-en.msi.com/index.php?topic=251103.0

Quote from: Svet on 04-December-14, 14:56:25
list full detailed system specification, see >>Posting Guide<<
which version was this?
Board: Asus Z87I-Pro
Bios: Version 1003
VGA: MSI GTX 970 Gaming 4G
PSU: Silverstone SST-ST65F-G Strider 650W Full Modular Power Supply single +12V rail with 54A
Intel Core i5-4670K Haswell Quad-Core 3.4GHz LGA 1150 84W Desktop Processor
MEM: 8GB (2x4GB) 1600mhz Corsair DDR3 Vengeance Jet Black Low Profile, PC3-12800, Non-ECC, CAS 9-9-9-24, XMP, 1.5V
HDD: Samsung 840 Series 250GB 2.5 inch SATA Solid State Drive
COOLER: cooler master hyper 212 evo
OC: none
OS: Windows 8.1 64 bit
S/N for the GPU is 602-V316-03SB1409075224 current bios version is 84.04.2F.00.F1 which was downloaded from https://forum-en.msi.com/index.php?topic=184740.0 and I used NV316MH.182
I don't know what the name of the vBIOS I updated from was, but it was the stock version that came with the card so most likely the vBIOS before the one I'm currently using which was downloaded to fix the fans randomly spinning.

Request - MSI GTX 970 Gaming 4G VGA bios

Hey,
I have MSI GTX 970 Gaming 4G and I've heard about this new bios nv316mh.186 on Nvidia forums. Now, I have and use msi live update [the newest version] and it doesn't show any new updates for my card.
System information section shows me that my current VGA bios version is nv316mh.182
Here is my S/N: 602-V316-03SB140909****
Thanks for any help!

here it is: https://forum-en.msi.com/index.php?topic=252890.msg1453625#msg1453625

MSI GTX 970 Gaming 4G Issues & BIOS Update

bios.zip (136.34 kB - downloaded 37 times.)
Hello,
ever since I bought my GTX 970 I've had about 5 BSOD's while playing CS:GO and GTA:V. I am not sure whether it's a GPU issue or not, but I never had that issue before (at least with CS:GO).
Tech specs:
MB: z87-pro
CPU: i7-4770K
GPU: MSI GTX 970 Gaming 4G
OS: Win7 x64 SP1
latest OS updates
latest nVidia drivers
I've been wondering if there's a BIOS update for my GPU? I also tried just today to download MSI Live Update 6 but after executing the installer it displays "This application does not support this platform."
I've attached my GPU Bios.
Thanks in advance!

Quote from: Nichrome on 26-April-15, 03:21:48
Hi
With LiveUpdate, don't worry. Many users got issue with it, I believe MSI is aware of this already.
Is your motherboard running latest BIOS?
Is it known to work fine with other graphics card??
Do you have any OC on your CPU/RAM? (RAM OC=more than 1600MHz). Remove and try again.
What did the BSOD say? Error code?
Heya, thanks for the reply.
That's good to know for Live Update, just wanted to let you know. Before my GTX970 I was using an Asus GTS 450 (I know, lame) and used integrated graphics a couple of times but never had BSOD's during games with either of those. I didn't take a note of the BSOD error code, can I find a log somewhere on my system to upload it?
OC-wise everything is running on stock clock, BIOS is also latest version (2103, according to Asus).

MSI gtx 970 gaming 4G

Hi....I've just bought this msi graphic card...is it possible to order a backplate for this card? maybe something like the backplate of the new msi 970 gaming 4G golden edition...
thanks

This is a prototype....I've co-operated with ColdZero, that makes these backplates and other stuffs.
And this is the final work for my MSI GTX 970 gaming 4G

MSI GTX 970 GAMING 4G + RAIJINTEK Morpheus

Greetings everyone.
So as I'm aware off, there are no "default" PCB for the 970. Manufacturers were told to create their own PCB or base it off some older PCBs.
With that said, how would you know if an aftermarket GPU cooler would fit on lets say MSI GTX 970 GAMING 4G, since there should be no such things as "reference mounting holes"?
I have the RAIJINTEK Morpheus GPU cooler laying around alright. But is there no way at all, to know if it'll fit the mention videocard?

Okay..
This is my suggestion:
https://www.overclockers.co.uk/webnote.php
Presales Enquiry:
Tell them that you want to buy SPECIFIC graphics card (e.g. MSI GeForce GTX 970 Gaming Edition 4096MB ) and you also want to buy Rajintek Morpheus for it. And ask if it will fit. You don't have to buy it from them though (don't worry if you live outside the UK, they just provide damn good support on presales questions)

Msi GTX 970 Gaming 4G - GOP ?

Dear MSI Team,
i have a msi GTX 970 Gaming 4G in combination with a ASROCK Fatal1ty Z97 killer mainboard.
The VBIOS version of my my GTX 970 is: MSINV316MH.184
When I try to enable the Ultra Fast Boot option im my UEFI Bios of the mainboard, my PC does not Boot and shows a black screen.
Only when I remove the GTX 970 from the mainboard and use the built in graphics card I’m able to boot again.
Therefore I guess the MSINV316MH.184 VBIOS is not a GOP BIOS.
Question: Is there a other VBIOS available for my GTX 970 Gaming 4G whith GOP ?
The label on my graphics card shows the serial number: 602-V316-050B1412019295
Thank you in advance
Best regards

Quote
Therefore I guess the MSINV316MH.184 VBIOS is not a GOP BIOS.
nope, that guess is wrong
this is GOP/UEFI vbios
9xx series also have only GOP/UEFI vbioses, they don't have legacy vbios
Quote
The VBIOS version of my my GTX 970 is: MSINV316MH.184
Question: Is there a other VBIOS available for my GTX 970 Gaming 4G whith GOP ?
The label on my graphics card shows the serial number: 602-V316-050B1412019295
latest version .186 can be found here:
https://forum-en.msi.com/index.php?topic=252727.msg1452642#msg1452642

Some body (mod or tester) can show me picture board of MSI GTX 970 Tiger

I need a high res picture board of MSI GTX 970 tiger to know voltage controller they used is what, some body help me please ?

Quote from: hpipiw on 28-October-14, 13:30:42
Does this have what you need?
pic from http://www.ncixus.com/products/?sku=102246
thank you so much

Re: MSI GTX 970 4G making unhealthy noises

Similar Messages

Maybe you are looking for