Re: MSI Z97 Gaming 7 No POST

This is probably before they started allowing the ability to do USB rescue disks. This is why you cannot find the folders they talk about....
I would probably suggest getting a USB DVD drive and using that instead.
I'm willing to bet there is a way to...

This topic has been moved to GAMING Graphics Cards.
https://forum-en.msi.com/index.php?topic=258166.0

Similar Messages

  • MSI Z97 Gaming 7 No POST

    Hello, After working successfully for about 7 months with the same setup, something happened today and the computer no longer boots.
    During the initial boot, I only see the 2 small blue led & MSI logo brighten up. None of the 2 POST LEDs show any code....

    So I managed to update from 1.19 to the 4.3 bios. My new GTX 980TI still doesn't post. Is the gfx card just not compatible?
    Win 7 64bit
    P67A-GD65 (B3)
    i7 2600K at 3400 ghz
    16GB Ram 1600
    Sandisk Ultra 256GB
    Corsair HX850
    I already tried the GTX 980TI on...

  • MSI Z97 Gaming 7 PWM Fan setting question

    Hello, right now I'm using Z87 motherboard from others vendor (as***k), and now I want to change my motherboard to MSI Z97 Gaming 7. But there's something that I want to ask first. When I'm using still using Z77 motherboard which is MSI Z77A-G45, I can set the PWM fan to change it speed automatically by change the CPU fan to auto in the UEFI. But in the Z87 I currently use I have to customize it in the UEFI, so that my PWM CPU fan change its speed as the CPU temperature changes, it can't be set to auto and I don't like it at all. Now that I want to change my motherboard to MSI Z97 Gaming 7, I'm searching the review first. And I'm seeing that it have similar fan setting with the Z87 motherboard that I currently use 
    I want to ask, is it possible that I can set the CPU fan setting to auto just like the Z77A-G45 I used to have?

    Quote from: Abula on 19-May-14, 08:22:10
    What you are seeing is mulitple breakpoints of temperature, as you do on your AsRock.
    I own a Z87GD65, and in mine i only have 1 true breakpoints, which is the temperature in which you want the fans to speed up, according to the temperature of the cpu.  I als did a build for a friend on a Z77GD43 and it was similar just didnt had the graph, as it has on the Z87GD65 nor the new one that you posted on the Z97 Gaming7, but what i see is more customization on the new motherboard, with 4 different breaking points, i see the same restrictions on the PWM %, increments of 12.5% as it is on my GD65, weather its worth it, personally i dont care, one is good enough for me, i usually just spin down my fans to the lowest i can, and set the breakpoints for the temperature i want my fans to spin up, if the temperature is reach they will increase gradually, defined by the max PWM % and max temperature, this two variables (that you can change) will make the graph with more or less inclination.  In the new Z97 Gaming 7, seems the same just multiple breakpoints, meaning you can have different inclinations into how the fans react depending on the temperature, weather its worth it or not.... depends on the level of customization you want to the fan control, personally im fine with a single, but i can see people that could like having depending on their needs, personally what i would have loved though, is to give me 10% increments instead of 12.5%, or 5% would been better, but 12.5% just seems odd number imo.
    Remember, MSI only has 2 true PWM fan headers, CPU_FAN1 and CPU_FAN2, even though all are 4pin physically the SYS_FAN are not true pwm fan headers, they are voltage controlled and have much higher restrictions than the real PWM fan headers.  And remember that if you plug 3pin fans on PWM fan headers they will spin at 12V that its the voltage that its handled by PWM fans, so be careful what fan you plug into where to have control on them.
    Hmn, so since Z87 MSI use that breakpoint system to control PWM fan, just like my asrock Z87. So there's no auto setting on your Z87GD65?

  • Microphone issue with MSI Z97 GAMING 5

    Hi there!.
    I have just set up my new computer and i have problems with my microphone. My mainboard is a "MSI Z97 GAMING 5" and my box: NOX Coolbay SX.
    I have installed the drivers from disk and tryed also searching drivers on the web of MSI. I can hear with my speakers with no problems, same with my headset. But there is no way to use my microphone. I put it in the front panel, then i checked the control panel - sound and Windows tell me that the microphone is connected, but dont work. if i put it in the back panel, the realtek HD administrator tell me that something is connected in the microphone slot but WIndows dont detect it.
    in the BIOS, the HD Audio is ENABLED. I dont have any idea about what to do now. I have search on this forum but i havent seen this same issue. Can you help me?
    Thanks and sorry about my english. 

    ill post my specifications
    Board: MSI Z97 GAMING 5
    Bios: Version 1.0
    VGA:   MSI GeForce GTX 760 Twin Frozr OC 2GB GDDR5
    PSU:   Nox Urano VX 750W PFC
    Intel Core i5-4670K 3.4Ghz Box 1150
    MEM: G.Skill Ripjaws X DDR3 1600 PC3-12800 8GB 2x4GB CL9
    HDD: Seagate Barracuda 7200.14 1TB SATA3
    COOLER: Katana 4
    OS: Windows 7 64bit Professional

  • MOVED: MSI Z97 Gaming 5 and Intel Core i7 4790K

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=181378.0

    Quote from: AranelSurion on 03-July-14, 22:02:56
    Speancer, what was the BIOS version yours shipped with?
    I got a GAMING 5, according to MSI Support it's V1.0, since I don't have a spare LGA1150 chip I'm really curious if 4790K is going to work as it is. My build is from entirely new parts, so if somehow it fails to POST, I can't know for sure if it's because of the outdated BIOS or something else, It would be great to know if it's actually going to work or not on 1.0 .
    Anybody tried 4790K with 1.0 BIOS? Does it work?
    It was 1.0  Like I said, it works perfectly ouf of the box on MSI Z97 Gaming 5 with i7 4790K CPU. After installing system and most of my softwares like it was before format, I noticed that I could not enter BIOS, but system was working normally. Then I flashed BIOS from 1.0 to 1.3 in Windows and it worked again and has been working ever since.
    Good luck with your new rig 

  • MSI Z97 Gaming 9 ACK problem with wifi (lag spike)

    hi all,
    the problem is that all is well connected to the ethernet (killer 2205).
    while on wifi I have many lag spike when i play online game.
    I got a laptop with similar wifi card (killer 1202) and all went good!!
    so why with killer 1525 on desktop i got this lag spike? its very bad.
    the network driver is the newset
    my system:
    windows 7 64bit
    msi z97 gaming 9 ack
    i7 4790k
    16gb ddr3 2133mhz
    msi gtx 970oc
    seasonic 860 platinum

    Quote from: darkhawk on 17-June-15, 18:01:01
    I'd be more for RMA'ing the board.
    But personally, I'm staying away from Killer Network products from now on. They are buggy and do not work very well when they don't work. Sometimes they don't work at all. Check back through these forums, and one of the biggest issues with any of the boards and/or laptops is always the Killer Networks NIC's. And there is no simple and easy fix for many of the issues.
    If it was me, I'd buy a nice wireless card and use that instead. Or do the Intel mod you posted about.
    I won't say that the Killer Networks device SHOULD work, but time and time again they prove to not work. In that case, I'd replace it with something that will and move on. A $40 wireless card to not spend days or weeks trying to fix the problem is money well spent in my opinion.
    now im going with powerlink and all went good, but as all know, powerlink after 2 years will broke and need to replace..... but online game with eth is always better.
    So im tihink to resend to AMAZON and ask for refund and ill rebuy a gaming 7 without wifi this change refund me a good 100 euro......

  • MSI Z97 Gaming 7 not booting up

    Hi guys,
    I have just purchased new motherboard & new intel core i7 4790K. I've installed everything & when I tried to boot up the system it stuck to 72 error code during post checks in manual which states as "Late South Bridge Initalization" Please help guys as I m not able to boot up the system.. My configuration is as follows:
    Intel core i7 4790k
    MSI Z97 Gaming 7 MoBo
    Corsair XMS 3 4Gb RAM
    Corsair H100i CPU cooler
    Corsair CS750M PSU
    NZXT Source 530 cabinet
    Please help guys ....

    Hi
    What you can do is either:
    -Return the board (RMA)
    -Try to straighten it yourself using needle, magnifying glass and bright light
    -Ask local jeweler if they can straighten it up for you.

  • MSI Z97 Gaming 7 (A2 ERROR CODE)

    Hi everyone, because I have a problem with my Motherboard MSI Z97 Gaming 7 is that when I turn on my PC after display the code 99 and 9C, remains suspended in A2. From what I've read, this code is for a hard drive failure. The system remains in A2 indefinitely code until the reset button is pressed PC. In the second restart smoothly enters the operating system.
    My System Hardware is:
    *MSI Z97 Gaming 7 (1.90 BIOS)
    *Intel Core I7 4770K (NO Overclock)
    *16GB Corsair Vengeance (2x8GB) Memory
    *MSI R7970 Lightning X2 CrossfireX
    *Crucial M4 128GB SSD
    *Seagate Barracuda 1TB Hard Disk
    *EK Custom Liquid Cooling System
    *Generic All in One Card Reader
    *LG DVD/RW Drive
    *Corsair AX1200i Power Supply
    Then I tell them what I have tried without success this problem.
    * Update BIOS to 1.9 Versión (Latest)
    * Update SSD Firmware to 070H (Latest)
    * Change SATA Cables
    * Change SATA Ports
    * Reinstall Windows 8.1 in UEFI and Legacy Mode
    * Test each Ram Memory Sticks
    * Disconect internal USB Card Reader, Front Ports and Corsair Digital Link
    * Test try another SSD (Kingston V300 128GB)
    After trying all these things, the system is still hanging in A2 Error
    Thanks for any help you can give me.

    Quote from: pandaz on 24-April-15, 13:03:29
    You could try your device 1 by 1 and see which one of it is causing the A2 issue
    about this i already suggested the same:
    Quote from: Svet on 23-April-15, 21:42:28
    connected them one by one, and see which is causing this hang eventually
    he said any one of them alone is caused this A2 when its connected:
    Quote from: sebastianmancipe on 23-April-15, 21:49:10
    Already perform this test with any 3 devices, SSD, HDD or DVD's the same.
    Curiously hangs on A2 code when first turned not when restarted.
    Quote from: sebastianmancipe on 24-April-15, 04:12:03
    ¿this version of BIOS where it came from? It is official? because they have not posted on the official website of the Z97 Gaming 7? as had understood the latest BIOS for this motherboard is the 1.90
    its official, but beta bios and newer than your current.
    try all other things 1st that people suggested you, leave bios flashing as last option

  • New MSI Z97 Gaming 3 - very strange audio issues

    (sorry for the long post)
    Hi, I recently bought some computer parts from Newegg and built my first gaming pc yesterday, but when everything was finished setting up I noticed a major issue with the audio. Both the headphone jack on the motherboard and the headphone jack from the front panel connector aren't working correctly.
    If I plug in my headphones into the motherboard jack, the audio level is REALLY low. Like, even if I turn up the volume to 100% it sounds like it's only at 10%. I looked through the volume settings for the headphones and didn't notice anything wrong. Then I tried updating my drivers with the cd and ran the live update utility, but nothing changed. Also, the audio will sometimes make distorted/static sounds when the music itself is loud, yet I can still barely hear the music.
    The front panel jack is even worse! The sound is much more distorted/static-y when I plug in my headphones there.
    I know it's not my headphones fault because they work fine on my laptop. Even if I plug in a different pair, I still get the same low volume and static.
    I know the front panel issue is not because of the case. If I put the motherboard in an old HP case and plug in my headphones into the front panel on this case, same issue. (I know the old case normally works fine).
    I even tried running a linux live usb in case it was something wrong with Windows. It still had the same issues.
    My specs:
    MSI Z97 Gaming 3 ATX LGA1150
    Intel Core i5-4590
    MSI GeForce GTX 970
    Corsair Vengeance Pro 8GB
    WD Blue 1TB
    XFX XTR Series 550W
    Windows 8.1 Pro
    I would really appreciate some help. It seems like I've tried everything. 

    Hi
    What is the BIOS version your board currently has?
    Try without graphics card and with single RAM stick.
    You could also try out of the case on non conductive surface like wooden table or motherboard box, and see if it works then. Might be something in either cases shortening the board.

  • MSI Z97 MPOWER MAX AC vs MSI Z97 GAMING 9 AC

    I can't decide which motherboard to purchase.
    MSI Z97 MPOWER MAX AC = 20 Phase, 1x Intel I218-V Gigabit LAN controller
    MSI Z97 GAMING 9 AC = 16 Phase, 1x Killer E2205 Gigabit LAN controller
    I'll be gaming, and having a play with overclocking, which is the best do you reckon, they seem practically the same otherwise?
    Which one would you choose?

    Cheers for the replies guys, I appreciate everyones opinions. 
    Been digging for some more info...
    Quote from: Techpowerup | Posted:  6th May 2014
    MSI Also Launches its Z97 Gaming Series / Z97 OC Series Motherboards
    The Z97 MPower MAX AC is a notch below the Z97 XPower AC. It offers a milder 12-phase VRM to power the CPU, but one that draws power from a combination of 8-pin EPS and 4-pin CPU power connectors, and featuring a coolant channel through the VRM heatsinks. There's no PCIe bridge chip, but the board still offers three PCIe 3.0 x16 slots (x8/x4/x4 when all three are populated). Storage connectivity on this board includes eight SATA 6 Gb/s, and one M.2 slot. The rest of its connectivity includes ten USB 3.0 ports, 802.11 ac WLAN, Bluetooth 4.0, gigabit Ethernet, and AudioBoost audio with headphones amp and ground-layer isolation. The Z97 MPower MAX is the most "affordable" of the lot, at under $200. Its feature-set is more or less identical to that of the Z97 MPower MAX AC, except it lacks 802.11 ac WLAN, Bluetooth 4.0, liquid-cooled VRM heatsinks, and onboard OC fine-tuning buttons.
    The Z97 Gaming 9 draws power from a combination of 24-pin ATX, 8-pin EPS connectors, and uses a 16-phase VRM to condition power for the CPU, which is wired to four DDR3 DIMM slots, and three PCI-Express 3.0 x16 slots (x8/x4/x4 when all three are populated, x8/x8/x0 when two are, and x16/x0/x0 when one is. 3-way SLI and CrossFire are supported.  An EMI shield covers the rear-panel I/O, while another shields the entire onboard audio circuitry, and the NICs. Audio is care of a 100+ dBA SNR DAC, which an external headphone amp circuit, ground-layer isolation, audio-grade capacitors, and EMI shielding. Wired connectivity is handled by Broadcom's newer Killer E2205 gigabit NIC. Wireless connectivity is handled by an Intel-made chipset that offers 802.11 ac WLAN, and Bluetooth 4.0 connectivity. Storage connectivity is devoid of SATA-Express, but features eight SATA 6 Gb/s, and an M.2 slot. Overclocking features include voltage measurement points, and POST LED display. Expect this one to go for over US $200.
    The Z97 Gaming 7 and Z97 Gaming GD65 are two different beasts, although they're in the same price bracket (around $180). The Gaming 7 features an all-PCIe expansion area with modern M.2 slot, while the GD65 features dated mSATA 6 Gb/s. The rest of their feature-sets are identical, even if their PCBs are not. You get a 12-phase CPU VRM, three PCI-Express 3.0 x16 slots (x8/x4/x4 when all are populated), eight SATA 6 Gb/s ports, AudioBoost audio, and Killer E2200 NIC. The story repeats itself with the Z97 Gaming 5 and Z97-G45 Gaming.
    Barring the milder 8-phase CPU VRM, both are similar in features to the more expensive Gaming 7 and GD65, with the exception of two fewer SATA 6 Gb/s ports. At the entry level are the Z97 Gaming 3 and Z97-G43 Gaming. The two are designed for gaming builds with no more than two graphics cards, and offer some legacy PCI slots. The two offer AudioBoost and Killer E2200, but skimp out on the CPU VRM, featuring just a 6-phase one. Storage connectivity is consistent with those of the Gaming 5 and G45.
    Source / Source
    £199.99 - MSI Z97 Gaming 9 AC (Amazon UK)
    £168.20 - MSI Z97 MPOWER MAX AC  (Amazon UK)
    £129.53 - MSI Z97 Gaming 7 (Amazon UK)
    £124.99 - MSI Z97 MPOWER - (Amazon UK)
    £123.86 - MSI Z97-GD65 (Amazon UK)

  • MSI z97 gaming 7 , the computer hangs tightly

    Hello ! MSI z97 gaming 7 , the computer hangs tightly. all USB are switched off, and on the motherboard the mistake 25 is highlighted. The image on the monitor too hangs. In what reason? What the mistake 25 means ? When scanning on errors of RAM by means of memtest86+ the computer also hangs, only reset helps

    Quote from: 964758 on 10-April-15, 17:28:43
    Evo Labs 750W Quiet Silent PC Power Supply PSU Black with Red Fan (China cheap PSU). All ports were tested by RAM, the problem remains. (I bought a used RAM). M/B a brand new
    I doubt this PSU even supports Haswell? Try something from quality range (Corsair, Seasonic, Antec etc.) and see if it works then.
    Also... for Xth time, I will also mention this:
    >>Posting Guide<<

  • Msi z97 gaming 5 bios update help

    Hello I recently purchased the msi z97 gaming 5 motherboard. It was working fine it came with bios version 1.0 and I wanted to update it. I downloaded the latest 1.5 bios from msi website copied to usb flash drive and flashed it using mflash. Computer powers on but black screen wont do nothing. I cleared cmos and battery and still nothing so I am pretty sure its bricked. I am going to store to exchange it for another one but I want to be able to safely update the bios without bricking again. I usually dont update bios unless needed but i need at least 1.2 bios to fully support the devils canyon cpu. Can someone please point me in the right direction? I read about the usb flashing tool in forum but also read that bios+me need to be flashed and I don't know if that program is up to date and will flash both files? I really appreciate it if someone helped thanks in advance.

    Also does anyone know if it is dangerous to update the bios with a 4690k devils canyon cpu since it is not officially supported until 1.2? Is that why my first bios flash was bricked? I would hate to go and borrow another cpu just to update the bios but if I have to I will. Sorry for all the questions but I need to get my bios updated and I will not update it until I am sure of all these things. Thanks to anyone who answers these questions.

  • MSI GTX980 Gaming sometimes not recognized by MSI Z97 Gaming 9 AC

    I have been experiencing a very odd problem with my new hardware.
    Hardware
    Motherboard: MSI Z97 Gaming 9 AC
    CPU: Intel Core i7-4790
    CPU-cooler: Scythe Mugen 4
    RAM: G.Skill RipjawsZ F3-17000CL9Q-16GBZH
    Videocard: MSI GeForce GTX 980 4GB GAMING 4G
    PSU: Seasonic X-660 80+ Gold
    SSD: Crucial M550 2,5" 1TB
    Monitor#1: LG 34UM95-P
    Monitor #2: Eizo Foris FG2421
    OS: Windows 7 Professional
    Issue description
    The thing is that with 2 monitors connected the videocard is not recognized on a cold boot, but boots perfectly most of the time after a restart. In some cases a restart doesn't do the trick. I have even seen a couple of times that the monitor shows that windows starts and then the monitor loses the signal from the videocard before I can see the desktop (rare). With just 1 monitor attached the videocard is recognized. Als the IGP works fine, it's just the videocard that doesn't seem to be recognized when 2 monitors are connected (all combinations of DP, HDMI and DVI). When the computer has booted after one or more restarts and the videocard is recognized the computer works flawlessly, no problems whatever I do with it (desktop work, stressing hardware, playing games, etc.). Not a single sign of instability.
    It's just the cold boot and sometimes the soft boot or restart that causes the videocard to not being recognized with 2 monitors connected.
    What makes it really weird to me is that when the computer goes into sleep mode I can wake it up normally within say 10 minutes. But if I wait for let's say an hour the videocard is not transmitting a signal through the videocard.
    When IGP is enabled the computer boots and windows loads normally (I hear the sound of the Windows login), although the monitors stay black when connected to the videocard. Then switching the connectors from the videocard to the motherboard shows me a normal Windows login screen, but the videocard is not visible in the device list. When the IGP is disabled to bootup sequence just hangs until a restart works and the computer boots normally with the videocard getting recognized and working properly.
    Click sounds
    I noticed the motherboard makes 4 click sounds when booting, like relays flipping. I think it has to to with distributing power to al the components, since it looks like components respond to the click by turning led lights on. But I have to say I've never come across a motherboard before that makes click sounds. Is this normal?
    Tried fixes
    - Replaced the RAM with 100% working RAM from my other computer (Corsair Vengeance LP CML8GX3M2A1600C9) -> problem persists
    - Disabed XMP -> problem persists
    - Replaced the PSU with another one (Cooler Master V550 Semi-Modular) -> problem persists
    - Reinstalled the videocard physically -> problem persists
    - Tried several combinations of connecting the 2 monitors to the videocard (all DP ports, HDMI and DVI) -> problem persists
    - Replaced the videocard with a MSI GTX970 Gaming (connected with 1xDP and 1xHDMI) -> problem persists
    Conclusions so far
    The cause can be found in the videocard or motherboard (probably BIOS issue).
    Who can shed some light on this issue?

    Quote from: JLio01 on 14-November-14, 17:02:39
    Try all PCIE slots no luck? Does the black screen always happen on one certain monitor or both?
    I tried both the first and the second PCIe slot. No difference except for the fact that in the second slot the card only works at x8 bandwidth.
    Quote from: jotan.va on 24-November-14, 18:05:51
    BTW - Did anybody try to remove the wifi module from the board and then test?
    I didn't install the wifi module in the first place.
    UPDATE
    I returned the motherboard to the webshop I bought it from and sent my cpu, ram, psu and videocard (GTX980) with it so they could test it. They found out that the videocard is the problem. So now I have to send the videocard to the webshop it bought that from. However, I am suspecting that it's just a VBIOS problem and not some fault in the hardware itself. On the other hand, it would be very strange that MSI would release a videocard that cannot work with one of their own top motherboards, wouldn't it?

  • Crash by gaming with MSI z97 Gaming 9 AC/ MSI 980GTX

    Dear MSI Form
    The last couple of weeks I have a very bad crash,
    This is my system:
    Windows 8.1 64
    Mother board: MSI Z97 Gaming 9 AC
    GPU: MSI GTX 980
    CPU: Intel core i7 4790K 4 GHz
    CPU Cooler: Cooler Master Nepton 240M
    Memory: 16GB 4x4 Corsair vengeance pro
    Hard disk: 2 X 1TB 1 X 1TB SSD
    Power supply: Be quiet! Power Zone 650W
    Case: Cooler Master CM Storm Trooper Window
    Fans: 9X Be quiet! Shadow wings + Fan controller
    I use my pc mostly for gaming,
    I bought en build my pc on September 2015 but now and then I get a very bad crash, the crash shuts down my pc (no blue screen / no Error) just a black screen with a pc that won’t respond on anything. The lights are on at my motherboard cpu cooler and GPU, but no respond. To turn my pc on again I have to shut down the main power switch. After 10 seconds I can start up my pc again.
    I get the following windows event: id 41 kernel power
    Scenario:
    This began when I played Dragon age 3 in December, I got the crash twice in like 100 hours. (not a big deal) than I got the same crash once when I played GTA V with 60 hours more or less. But now when I playing the Witcher 3 wild hunt I get it every 5 minutes.
    What did I try to fix it but won’t work:
    - Memtest run x10 no error
    - Drivers up to date
    - The temps under full load are great CPU they won’t go over 51 degrease / GPU 68 degrees / the rest won’t go over 45 degrees.
    - I got no virus.
    - Everything is connected just fine.
    I hope you guys can help me out.
    Kind regards,
    Tijs Dragtsma from the Netherlands

    May be your PSU being too weak or going bad (I doubt though). Although you have 9 fans.. maybe try disconnecting case fans and leave only CPU cooler ones to work?

  • MSI Z97 Gaming 9 AC - Intel Wireless AC 7260 module don't work

    Hi,
    Please help me, i started my new rig and the wi-fi module (that hard to fit in the mobo) don't even appear in device manager.
    I already tried to dismount and remount the module on the motherboard with extreme care, no success.
    Here is my rig:
    Main Board: MSI Z97 Gaming 9 AC
    Bios Version: 1.4
    Video Card: R9 290X
    Memory: 16 Gb Corsair Vengeance 2400Mhz
    Processor Intel 4790K
    OC: Not yet
    Operating System: Windows 8.1 Pro 64
    Please help me 

    Recheck your WiFi Bluetooth expansion module connection on the board.
    Recheck your MB mounting in the case, i.e. errant standoffs. Perhaps test the board outside the case on a non conductive surface to ensure no potential short exists. Then retest with the WiFi plugged in.

Maybe you are looking for