Re: MTS to MTO+MTS

Dear Expert,
we are currenlty using MTS scenario & now plannig for MTO + MTS scenario. For fert level we will do MTO & Semifinish, raw material level will do MTS scenario.
can any one tell how to map this scenario/any configuration changes ?
which plannig strategies are need to be used in material master?
i have tested with Planning stratgies 20 but it is not generating accounting document, so please help me.
Regards,
Ishwar J

Dear Ishwar,
1.First check whether planning strategy 50 will be suitable your business requirement,here PIR's will be entered at FERT
material level and all the planned orders for the dependent requirements can be converted and produced and kept in stock ,but
for the final product alone only after recieving a sales order its planned order can be converted into production order.
The system generates a planned order which is convertable.
2.In this case if this not suitable check with planning strategy 40.
3.If this is not suitable means create a strategy group by combining one make to stock and one make to order planning strategy
and check the output.
Regards
Mangalraj.S

Similar Messages

Reg. Accounting Revenues for MTO & MTS in SAP PP

Hi all,
I am having few doubts in Costing aspects of SAP PP.
What is Accounting revenues for MTO & MTS scenario how its to be defined.Please explain?
What are the Costing impacts of SAP PP.How the Costing of a Product in the production aspects to be addressed.What are the prerequistes for that.Please provide me help materials with detailed examples.
Thanks in advance,
M.Badrinarain.

Dear Badri,
Plz refer the below link, this is current thread of CO Forum, Reply by Mr. Mangalraj
[Product Costing;
Regards
kumar
Edited by: kumar kumar on Nov 9, 2009 11:07 AM

Is there any constrain in using the same order type for MTS and MTO

Hi,
i have the constrain to use single production order type .
Can i use single order type for MTO and MTS.
is there any constrain in using the same order type for MTS and MTO.
pls help me.

Hi,
There is no constraint or limitation in using the same production order type for MTS and MTO . Settings in requirement class and material master will mainly control whether the flow is MTS or MTO.
Regards,
Mrinal

Material Issue for both MTO & MTS

Dear Guru's
I have to do REM Backflush for a MTO scenario.
The corresponding raw material are available in stock which was not purchased over a period of time.
When I try to do post with correction the system is not allowing me to do the posting, the system is giving error as sales order item is not available.
Can anyone help me consumming the raw material available in the stock .
Is there any settings to be done to consume the material which is available in the stock for bothe MTO & MTS.
Kindly do the needful.
Helping hands will be appreciated with good points.
Thanks & Regards,
Arul.

Hi Arul
Please check the below in your DEV server.
If you put the Individual/coll indicator to 2 in MRP 4 view in material master the raw materials can be taken from unrestricted use stock while back flushing.
Or
IN MB1B you can use mvmt type 412E to convert unrestricted use stock to sales order stock.
SO u can do the backflushing after the conversion.
Cheers
JOJI

FOR MTO & MTS scenario when the Production order shows the Sysy status DLV?

Hi ALL,
In the MTO & MTS scenario when the Production order system status become DLV ?
Regards
Satish

Hi Satish,
For both the planning strategies (MTO/MTS)..
The status of the production order becomes DLV ,
when you do GR for the order with 101 movement type.
(OR)
At the time of final confirmation if automatic goods receipt is activated.
Regards,
Anil

MTO & MTS

Hello Gurus,
What are the MTO & MTS. Explain me clearly with example.
Bye

Hi,
MTO - Acronym for Make -To- Order. Material which are made against a specific sales order / project / network order. The requirement created for MTO materials will be individulal. Stock of the materil will be maintained in separate stock segment of the order / project. Stocks can be valuated on non-valuated. In valuated stock, every material movement creates a corresponding accounting document, whereas in non-valuated stock materal movements do not create aaccounting document. production orders / puchase orders for MTO materilas will be account assigned to sales orders / networks / WBS element etc.
MTS - Acronym for Make-To-Stock. Stock is maintained at plant level. There is no separate stock segment. Production order / Purchase order etc. are not account assigned. Every material movement creates an accounting document.Requirements / inventory are mainatained and tracked at plant level.
Hope it provides basic information sought by you.
Regards
Muraleedharan.R

MTO/MTS--------------------Yesterday

Hi all
Very one Explined MTO/MTS Yesterday very nice
Can any one send materail for configration
pls

hi,
Business procedures material based on MRP irrespective of the sales order ie Make to order
If the standard product is going to be change slightly according to the customer requirement then businss manufacturing that particular material for particular customer called as Make to order.
Inventory is going to be maintained in special stock indicator E order inhabd
Configuration
Create material master by maintaining general item category group- 0001(make to order)
Availability check - 02
Transportation Group - 0001
go to va01 and raise sales order
item category:TAk
Schedule line category : cp
Requirement type KE
Requirement class 040
Check TOR and avalability check
special stock : E
VOV7
of TAK
billing relivence : A
Pricing :X
go to mb1c
maintain stock with a special stock indicator E
mavement type 61
Special stock E
specify sales order number line item number and saveit
go to VL01N main data
Go to VF01
save it
note for make to order you cannot maintain availability check
sreekanth.vaka

MTS to MTO

Hi all
we have MTS system and unfortunatley, we need to pass to MTO (we need to track purchase request for stock materials, and in MTS MRP put together al kinds of requirements for stock materials). Is it possible?
thanks
Gabriele

Dear ,
If you have MTS , then your FG stock will be in unrestricted stock and can be solled out as TAN ietm through Sales Order .
But if you change over to MTO , then those stock will be Special stock (E) and will refernce to a Sales Order .
Now , you can very well change over to MTO process by choosing Planning Stagey 20 , Indiviaudl Collective Indicator -1 but you need to think what you are going to do with existing Orders whiuch have been under process in MTS based on the Production Order status .
Change over to MTS to MTO needs botH SD and PP intregeration like Requirement Type (OVZG) , Requirement Class , Item Categoery(OVZI) and Planning Starggey Group( SPRO-MRP-PIR-Define Planning Stattegy group) .Make sure that you have all the set up .
Hope this helps
Regards
JH

Mix Planning (MTO + MTS)

Hi...
I have Stock of One raw material (Trading Material) of Quantity 10.
Now i created Sales order for Quantity of 50 qty...Now my requirement is that after MRP run, system should consider the the available stock (10 nos.) also after generating requirement PR of qnty 40 should have reference of Sales Order,Customer Specific PR.
How to map this , which strategy i have to use for this material, as it mix of Make to Order & Make To Stock kind of Scenario.
Expecting Positive reply Soon

I'm afraid you are waiting for positive reply for vain.
As per my best knowledge there's no mix MTS / MTO scenario in SAP. Whether you use MTO or MTS but you cannot mix them.
You can maintain two planning strategies for your planning strategy group (that is assigned to your material in MRP3 view of material master) and use one of them in the SOs according to your wish...
SPRO > Production > Production Planning > Demand Management > PIR > Plannng Strategy > Define Strategy Group (V_T461P) - you can give a main startegy and some alternatives for the same strategy group...
...but even though you define one MTO and one MTS strategy for your strategy group MRP will consider MTO SO as MTO SO and MTS PIRs as MTS PIRs. I mean you cannot consider normal (not-assigned stock) for MTO SOs (for which MRP plans in the SO special stock segment). And you cannot create PR with SO reference by MRP for MTS requirements.
Strategy 40 is mix of MTS and MTO (you can consider SOs) but it also can't fulfill your requirements.
Just my opinion...
Regards,
Csaba

HI All --MTO-MTS-ETO

Hi All
can any one explain
What is the procedure of MTO , MTS & ETO
Explain

Hi Prakash,
make to order:
it is a buisness scenario where the company produces goods according to the
needsand specifications of the customer,the product sold is not stored on the shelves.the product could be very similar but merely change a portion for differen t of its forms for different sales orders.the production cycle is trigered according to how the customer likes to see the product but not the company.
Make to order Scenario
1. Make-to-order production is a process in which a product is individually manufactured for a particular customer. In contrast to mass production for an unspecified market where a material is manufactured many times, in make-to-order production a material is created only once though the same or a similar production process might be repeated at a later time.
2. You can use make-to-order production: (a) For branches of industry or products where a small quantity of products with a large number of different characteristics are manufactured (b) When a product has to be assembled particularly for a sales order.
3. Stock keeping is not usually carried out for products that are made to order. In companies using make-to-order production, the demand program only determines the production area, in which various variant types are produced. Depending on how you track the costs associated with make-to-order production, there are two ways to process make-to-order items during sales order processing.
(a) Make to order using sales order
(b) Make to order using project system (not relevant for SD application)
4. for make to order production using the sales order, all costs and revenues involved for an order item are held collectively at that item. A particular rule is used that can be changed manually to transfer costs to profitability analysis.
5. make to order production is largely a production planning configuration. It is also controlled by the requirements type, which is determined by three things
the strategy group (MRP 3) in MMR
the MRP group (MRP1) in MMR
the item category and MRP type (MRP 1)
6. Make-to-order production is controlled by the requirements type. The requirements type is determined on the basis of the MRP group (MRP1) and the strategy group (MRP3) in the material master record. In addition, a plant must be assigned for make-to-order items in the sales order.
make to stock:
here the production is done irrespective of the customer orders, it is usually done on the basis of the sales forecasts not on the customer specifications, it is usually a push strategy,company produces the products and they are sold.
there is no customising of the product.
STO
Whenever you need to transfer the materials from one plant to another plant belonging to one company or belonging to two company code stock transfer order is raised by the delivering company.
STO:
Transfer of goods from one location to another location,it may be between plants within the same company code or in different company code's plants.
within the company code,bet plants, receiving plant will raise the STO in Supplying/issuing plant-ME21n,
Supplying plant will deliver the goods to receiving plants , then we need to pick n post the Goods Issue-VL02n, nw when we can observe that the STO qtty will be added into receiving plant and reduced in Delievering plant.
Configure Intercompany Stock Transport Order
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assaigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assaign the supply source ( Delivering Plant).
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here nt. and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery docume
Billing (Intercompany pricing conditions should be set).
Assign points if useful

Difference between MTO/MTS vs Consumption Based Planning?

Hi,
What is the Difference between MTO/MTS vs Consumption Based Planning?.
In what scenario we used these types?? could you please explain me with examples...
Regards,
Raj

Hi,
MTS = Make to stock, you are simply wanting to build up stock and so this will generate requirements even if there are no Sales orders or demand of any kind. This is the most common option
MTO = make to order, you only want these items when there is a specific
But consumption based planning is not completely different, you are still using MTS / i.e. you are creating requirements based on the settings in MRP instead of any demand (but the same applies to MTS)
So MTS and consumption based planning are more or less the same thing.
You would use MTO if you produce items only when you have an order.
So if you have warehouse space and sell a lot of an item, you can use MTS or consumption based planning because you know that you will always be likely to be able to sell the stock.
If you make things for specific orders (such as special sizes or specifications to match the customer's requirements. Or if you don't sell many of an item and the lead times for production are very short (or you don't have much warehouse space) then you would wait for an order before making the item (MTO
Steve B

Re: MTO & MTS for same product

Hi Experts,
How to configure both MTO & MTS for a same product.
Regards,
Vivek

Hi Experts,
I am having a requirment for MTO Subcontracting order.The customer issues raw material for the production for the FG product. Now I want that the system should do the Planning for the FG by MRP & also to calculate the the raw material required. The system should also be able to created purchase requisition for the deficit raw material. The raw material should not have any financial implication i.e. they are are only relevent for stock posting & not for any valuation purpose.
Here my client is the subcontractor. So he does production for Other clients as well.
Please advise.
Regards,
Vivek

DIFFERENCE BETWEEN ----MTO & MTS PROCESS

HI,
CAN ANYBODY EXPLAIN THE DIFFERENCE BETWEEN MTS AND MTO.I WANT TO CONFIGURE MRP RELATED CUSTOMIZATION.BASICALLY I AM AN MM CONSULTANT.SO KINDLY GIVE YOUR SUGGESTIONS.
FLEMMINGS

Hi,
In make to order process, u plan ur production on the basis of the orders u get. So, its like if u get some 10 orders, u'll plan ur production in a way that u can fulfill those 10 orders.
While in make to stock, u produce to stock ur materials, its like u plan ur production on the basis of ur production capacity and after production u stock that material. Now when the orders come u service them from the materials which u have already produced and is stocked....
Reward, if helpful
Noopur

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip nmed 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved th

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip named 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved the project, the actual video content of 0002.MTS to 0005.MTS was missing(source clips are still there but they were playing and working as part of that 0001.MTS timeline clip before). Those parts of the 0001.MTS clip in the timeline were Danger Striped and can be relinked but now have no edits anymore. The edits are apparently only linked with the original 0001.MTS source clip but extend beyond the actual range of the actual source clip. At the time I thought it was weird that premiere displayed the whole string of clips as one (with one name and no breaks) but it all works in the original project file but cannot be transferred to another location without multiple clips showing Danger Stripes.I need to move it and preserve the dozens of motion and opacity edits linked to the apparently oversized timeline clip. HELP!! any ideas?
I did not nest any clips or sequences, premiere just seemed to combine the clips under one name when I moved them to timeline.
I am using CS5.

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip named 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved the project, the actual video content of 0002.MTS to 0005.MTS was missing(source clips are still there but they were playing and working as part of that 0001.MTS timeline clip before). Those parts of the 0001.MTS clip in the timeline were Danger Striped and can be relinked but now have no edits anymore. The edits are apparently only linked with the original 0001.MTS source clip but extend beyond the actual range of the actual source clip. At the time I thought it was weird that premiere displayed the whole string of clips as one (with one name and no breaks) but it all works in the original project file but cannot be transferred to another location without multiple clips showing Danger Stripes.I need to move it and preserve the dozens of motion and opacity edits linked to the apparently oversized timeline clip. HELP!! any ideas?
I did not nest any clips or sequences, premiere just seemed to combine the clips under one name when I moved them to timeline.
I am using CS5.

MTO & MTS scenario

Hi,
I am having a requirement where my final product ius MTO and input products are MTS..
PPM is defined at all levels, when a Sales Order is created for the final product and I take a CTM run Order segment is created for that order and corressponding Planned Orders are created at subsequent levels which are assigned to the same order segment eventhough the input material is MTS.
I just wanted to know in this scenario can we generate Planned Order for MTS material which will not be assigned to any order segment and which can be pegged to any MTO Sales Order for the final finished component.
I am using CTM for planning.
Thanks & Regards,
Sanjog Mishrikotkar

Hi Sanjog,
Please refer to SAP thread [Sales Order on 1 product and Need to consume Forecast on another product|Re: Sales Order on 1 product and Need to consume Forecast on another product] .
here forecast product is MTS and Sales order product is MTO.
You can map a planning material scenario to achieve this.
Regards,
Digambar

Re: MTS to MTO+MTS

Similar Messages

Maybe you are looking for