RE: Multiple asset posting with different dates

Hello can we post and transfer multiple asset codes with different posting dates to different asset in one single transaction i have use ABUMN with multiple selection but it is not provide to use different posting date for different asset codes.
Regards
Abhisekh Mandal

ABUMN is supporting multiple assets but not multiple dates. Post twice with two different dates.
Srinivas

Similar Messages

Multiple series chart with differing dates

Is there a way to display multiple series on a chart when the
data for the horizontal axis doesn't match up? For example:
if data1 (val, date) is (10, 01/05/2008) (15, 02/08/2008)
(20, 03/01/2008)
and data2 (val, date) is (8, 01/12/2008) (25, 02/10/2008)
(30, 03/14/2008)
how would I get the data to display on a multiple series
chart. Right now, I am using a CategoryAxis for the horizontal
axis. If I do something like this:
hAxis.dataProvider = data1;
hAxis.categoryField = "date";
it will show only the series for data1, but not data2.

Thanks for the reply.
That link tells you how to add multiple axis to a chart which
is what I'm doing, but unless you want to have two horizontal axis
on the bottom (which looks terrible) or put one on the top and one
on the bottom (which looks awkward), this solution is not very
good.
The problem is that the data ranges for the horizontal are
the same, but the individual timestamps are slightly different,
sometimes off by only a few hundredths of a second.
To attempt to work around this, I merged the two arrays, but
that seemed to mess up the display of the data.
Is there not a way to just draw the second series on top of
the first without having to lock it to the axis? It seems like the
answer is no when using the standard packages. But is there a way
to override this and get it to draw properly?

I have multiple devices backed up to the same computer each with different data. how do i keep them from syncing all data when i back up or transfer stuff from the computer to a device?

i have multiple devices backed up to the same computer each with different data. how do i keep them from syncing all data when i back up or transfer stuff from the computer to a device? one is an iphone 6 and the others are ipad mini first gens, each ipad has 64gb and the iphone has 128, need to keep the data seperate as they are not all mine

Itunes content and pics are NOT part of the backup that itunes performs.
Backing up, updating, and restoring iPad, iPod touch, and iPhone software
You should transfer any purchases from iphone regularly: File>Transfer Purchases , if they fail to be transferred when you sync.
You buy one and only one download. It is your responsibility to move/copy/backup your purchases.
You can try contacting itunes support and asking for an exception, but they are under no obligation to allow.
http://www.apple.com/support/itunes

I have multiple itunes libraries in my itunes folder with different dates. how did this happen?

im trying to figure out why songs randomly disappear from my actual itunes. when i check the itunes folder on the drive, there are several versions with different dates. I didnt intentionally create these multiple libraries and i dont know how to open them to look for missing music

Settings/Store worked...thanks Lawrence

How to go about multiple inclination with different data selection in Delta

We have to copy large amount of data ( more than 42lak of recodes) selectivly from on ODS to other ODS. in delata load ( BW 3.5 enverioment)
I thought of loading data in slices through delta loading with selection condition.
step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
step 2> Take the delta load .. it will take all delta record with same selection
step 3> Now I want to do Initialization with selection condition as for calyear =2002
step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
Here what problem I am facing.. while doing 2nd time initialization it prompt me to delete the last initialization request form scheduler menu.
if i delete the last request .. will it take the delta for previous initialization selection and new initialization selection. ?
Please advice how to go about multiple inclination with different data selection in delta loading.
Looking forward your reply.

Hi,
step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
step 2> Take the delta load .. it will take all delta record with same selection
step 3> Now I want to do Initialization with selection condition as for calyear =2002
step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
You are correct with this scenario normally. The message you mentioned normally comes up when you open a infopackage and don't change the selection first or in case you have overlapping selections with an already done init.
regards
Siggi

How to Use Same Asset Number with Different Sub-number

Hi
We want to sell some assets and buy them back on lease. We want to use same Asset number with different sub-number under the same company code. This new asset will be under different Depreciation Area (Statistical).
We use external numbes for assets . And same asset number range is used by all compnay codes.
Please suggest whether this is possible & how.
With Regards,
Nitin

Hi,
Go to field status for asset master data section and change the field status to optional for field Deactivation date, then follow the below steps.
You can create an sub asset number to an asset, which is already deactivated by retirement as like normal sub asset creation with AS11.(While creating sub number, you need to remove cap date and deactivate dcate field manually from asset master)
With this you can get new asset number as same as your old retired asset main number and but sub number will be different.
To post to diff dep area, other than 01, then you first create an acq transaction type, which will post only to specific areas and then use the new asset number in ABSO to post acq with your custom TTY.
I have tested and found working well in my system............Try now in your test client
Thanks,
Srinu

SSIS project - read multiple flat files with different formats

hi all,
i need to import multiple flat files with different formats into different tables of the sql server database and not able to figure out the best way out in ssis to do so...
please advise the possible methods in ssis to do so and if possible the process which can be dynamic as file names or columns might change in future.

Hi AK1987,
To import flat files with dynamic columns, we can use Script Task inside a Foreach Loop Container to parse the first row of the flat file to get the columns names and save them into a .NET variable, then, we can create “Create Table” script based on this
variable, and then store the script into a SSIS package variable. After that, we create a staging table based on the package variable, load the flat file data to the staging table. Eventually, we load data from the staging table to the destination table. For
the detail steps, please walk through the following blog:
http://www.citagus.com/citagus/blog/importing-from-flat-file-with-dynamic-columns/
Regards,
Mike Yin
TechNet Community Support

I have my ipad notes linked to gmail and suddenly disappeared when I put the sim card into a new iphone, the funny thing is that almost all disappeared except 4 and with different dates up to two years. Why did this happen? No way to recover them?

I have my ipad notes linked to gmail and suddenly disappeared when I put the sim card into a new iphone, the funny thing is that almost all disappeared except 4 and with different dates up to two years. Why did this happen? No way to recover them?

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

Multiple report servers - with different uifont.ali

Can we have multiple report servers with different NLS_LANG?
They all should be started as windows service. Also I would like to have them look at different uifont.ali. The reason is that we want to have the same report run with different fonts in different languages. This way I can map the fonts in uifont.ali as I want.
Is it possible?

I don't think this is possible with multiple reports servers with one Oracle 9iAS home. You will have to install multiple 9iAS, in different Oracle homes.
This also means that you have different URL's (port numbers) for the two environments.
I have used this configuration before to install a test and production environment on one web server. Changing the conf files, variables etc. in the test environment doesn't influence the production environment that way.

Can a single HID report descriptor support multiple touch screens with different sizes?

Hi Experts:
I have a question for specifying touch monitor sizes in the HID report descriptor:
Can ONE HID report descriptor support multiple touch monitors with different sizes ?
Thanks in advance
leo

My screen shot is from AA9, and I have seen that the UI for AAX is vastly different, but...
Choose Paper Source from Page Size should be the "one-touch" solution your looking for.
In my test, my Konica-Minolta Bizhub failed to detect the proper paper trays, but Acrobat correctly spooled the pages.

MIRO post with different KDM account based on AP recon. account

Hi Gurus,
    I have one question on MIRO exchange rate difference posting.
    As user request, different AP Recon. account need post with different exchange rate difference account.
    In more detail: AP Recon. account has two kinds: Trading partner, none TP.
    For TP, post ex. rate different to one Inter company exchage rate diff. account,
    for none TP, post to the other exchange rate diff. account.
    But as I found, the exchange rate diff. accout is defined in OBYC, transaction KDM. It cannot config seperate by TP.
   Any one has encounter similar request?
Thanks,
Grace

Unfortunately the MIRO exchange diff setup is not defined in FBKA exchange rate difference.
It is defined in Materials Management postings (MM).
So any more idea?
Thanks,
Grace

How to compare two rows from two table with different data

how to compare two rows from two table with different data
e.g.
Table 1
ID   DESC
1     aaa
2     bbb
3     ccc
Table 2
ID   DESC
1     aaa
2     xxx
3     ccc
Result
2

Create
table tab1(ID
int ,DE char(10))
Create
table tab2(ID
int ,DE char(10))
Insert
into tab1 Values
(1,'aaa')
Insert
into tab1 Values
(2,'bbb')
Insert
into tab1 Values(3,'ccc')
Insert
into tab1 Values(4,'dfe')
Insert
into tab2 Values
(1,'aaa')
Insert
into tab2 Values
(2,'xx')
Insert
into tab2 Values(3,'ccc')
Insert
into tab2 Values(6,'wdr')
SELECT
tab1.ID,tab2.ID
As T2 from tab1
FULL
join tab2 on tab1.ID
= tab2.ID
WHERE
BINARY_CHECKSUM(tab1.ID,tab1.DE)
<> BINARY_CHECKSUM(tab2.ID,tab2.DE)
OR tab1.ID
IS NULL
OR
tab2.ID IS
NULL
ID column considered as a primary Key
Apart from different record,Above query populate missing record in both tables.
Result Set
ID ID
2 2
4 NULL
NULL 6
ganeshk

Same asset posting in different currencies?

Hi,
I have to create asset detail report. I wanna know that can same asset be posted in different currencies? aand can same asset have multiple cost centers???

Hi,
No.
-> otherwise you must divide your asset in different sub-assets with tcode AS11
greetings
and blessed New Year to all SDN members
Andreas

Acquisition tax in Belgium/Germany-Posting with different tax codes

Dear Friends,
Does anyone have experience working with Acquisition tax in Belgium and German where the goods and services purchased within EU have 21% -input and output tax such that it is ZERO. But still Tax authorities need to see both input and output tax amount with different tax code such as under:
Expense a/c Dr 100
Payable a/c Cr 100
Input VAT a/c Dr 21 - Tax code A1
Output VAT a/c Cr 21 - Tax code B1
Any help as to how to post the above entry and how to customize tax code to get the above result and any changes if required in country code tax calculation procedure will be greatly appreciated.
Thanks,
Pinky

Hi Pinky,
When you define your tax codes, the system defaults certain tax types that have been defined in the system for specific countries. Input tax, output tax, and non-deductible input tax are examples of tax types used in Germany.
The system determines which tax types are to be displayed by means of the country key. A calculation procedure is specified for each country key, and this procedure contains the country-specific specifications for calculating and posting the different tax types.
When you define the calculation procedure, you must answer the following questions concerning each tax type:
What is the base amount for calculating the tax? This can be the expense or revenue amount or, as with sales equalization tax in Belgium, a tax amount.
Which calculation type is used to determine the base amount: percentage included or percentage separate? With very few exceptions (such as for travel expense accounting in Germany), the base amount is normally determined percentage included.
The tax amount is 15%.
Percentage included
Tax amount = invoice gross amount * (tax rate/100 + tax rate)
150 = 1150 * ( 15 / 100 + 15)
Percentage separate
Tax amount = invoice net gross * tax rate/100
150 = 1000 * 15 / 100
To which side of the account must the tax amount be posted? The input and output tax is always posted in accordance with the G/L account and asset line items. For the tax to be posted additionally, the side of the account is determined depending on the input or output tax. For the acquisition and investment tax, for example, you post to the opposite side of the account.
Should a possible tax expense be divided between the G/L account and asset line items or posted separately? If, for example, you have a non-deductible input tax amount, you can choose whether to post to a separate expense account or apportion the tax expense between the G/L account and asset line items.
The type of tax calculation and posting depends on the answers to these questions and the combination of those answers.
The following topics introduce individual tax types and explain the necessary specifications for calculating and posting tax. For more information on the calculation procedure, see The Calculation Procedure.
See also:
Tax on Sales/Purchases: Input and Output Tax
Non-Deductible Input Tax
Deferred Tax: Italy
Sales Tax
Use Tax
Tax Calculation With or Without Jurisdiction Code?
Entering Taxes with Jurisdiction Code
Acquisition Tax
Investment Tax
Sales Equalization Tax
I hope this link will help you
http://help.sap.com/erp2005_ehp_03/helpdata/EN/e5/077e394acd11d182b90000e829fbfe/frameset.htm
Regards
Odaiah

SSIS - Import Multiple flat files with different metadata

Hi ,
I have set of flat files with different metadata structure, I would like to load them into staging tables.
1. ) Can we load the flatfiles into the staging tables with out having multiple data flow task.
2.) If possible , can we programmatically select the staging table based on the metadata of the flatfile and load them.
Please advise.
Thanks
Thiya

Nope in SSIS a data flow task needs to have a fixed metadata. So if your file metadata varies then best option would be use OPENROWSET syntax to pull the data and populate into your staging table. You may also use
SELECT .. INTO StagingTable ... FROM OPENROWSET (...)
syntax to create staging table at runtime based on the file metadata
http://sqlmate.wordpress.com/2012/08/09/use-your-text-csv-files-in-your-queries-via-openrowset/
If you want to do this in SSIS you need to create data flow dynamically using script task and build the metadata
see
http://www.selectsifiso.net/?p=288
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

RE: Multiple asset posting with different dates

Similar Messages

Maybe you are looking for