RE: My DV6-6b27nr said my hard drive not exist HELP!

I just purchased a laptop hp dv6 and tried to boot up and it said that I don't have a hard drive and I need an operating system. I check the drive and it has no error on my desktop and everything seems to be in order. Can my connection sata wire goes bad? That's why it can't find my main hard drive? And how do I go about fixing this problem?

If you have reseated the hdd to insure good connection with no luck, try resetting BIOS to Default settings.Enter BIOS by tapping the F10 key immediately after powering on. Once into BIOS setup, tap the F5 key to reset to Default settings (may be F9,check bottom of screen for correct key) then Save & Exit.
If no joy-Contact HP for warranty service:
http://h10025.www1.hp.com/ewfrf/wc/contacthp?cc=us&dlc=en&lc=en&os=4063&product=5193747&sw_lang=
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

HP Pavilion dv6 1328sl, bios says : hard disk not exist !

Good morning,
the bios says that the hard disk not exist. Still, if I boot the PC from CD with Linux, the files on the disk c can be seen .. I deleted the partition but the problem remains!
does anyone know how to access the advanced menu of the bios? It's an "Insyde" f36. I want to see if there is something wrong option ...
Thanx

Try a hard reset, works sometimes.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Hard Disk Not Exist help please

Hi, not sure if this should be in Recovery or Hardware or Operating Systems as it involves all three!
I have an HP G61-110SA running Win 7 64 bit; product no. VR523EA. Also have serial no if needed. One problem is, as the laptop is 6 years old, it's hard to remember what came with it.
Whilst using on Thursday it suddenly froze and ctrl/alt/del didn't respond so i held down the power key to turn off. When I rebooted, I got "PXE-E61 Media Test failure; check cable. PXE-M0F: Exiting PXE ROM. No bootable device -- insert boot disc and press any key".
I don't have a boot disc as the OS came preinstalled. So here's what I've tried so far by reading other similar problems in here.
- Ive taken out the HDD and reseated it. Reboot then said Hard Disk Not Exist. Tried reseating again. Same message.
- Created a bootable Ubuntu CD and ran that - no response.
- Created a Ubuntu bootable USB and that has worked except Ubuntu isn't showing the HDD so I can't retrieve anything.
I can however connect my wireless network and at least use Ubuntu in the meantime.
I've ordered a new (same) replacement HDD (a Hitachi 320GB 2.5"). So next problem is how to reinstall Windows 7 without a recovery CD? Did the old HDD contain the recovery partition drive or would that be located elsewhere thefore still be accessible when the new HDD is installed?
If not, I'm assuming I can still purchase recovery discs from HP? I know I should be able to create my own recovery discs however, the MS sticker on the bottom of my laptop beside the laptop details, has become too faded to read the important bits! All I can see is "Proof of License, Certificate of Authenticity, Microsoft Corporation 2005" and "Label not to be sold seperately". Any letters/numbers are long gone. So would I be able to find these any other way? My friend (an IT Manager) said something about DBAN being able to read all that from the HDD but not if it's fried?!
Next problem - I was also using Office 2007 (think it was Home Premium). Either this came preinstalled (unlikely?) OR it came with a 30 day trial which I could purchase the full version & download the full version from online using a link within the trial? I think this is what I did because I have no other way of obtaining Office for Windows 7 and yet whatever version I had, had about 3 user licenses because I also installed it on my son's netbook. I do have Office XP discs for my previous desktop PC (but couldn't have used those surely on Win7)?
And just to add a gripe .... although I certainly got my money's worth out of my old laptop, I'll now have to buy a new one - which I consider a treat - BUT I'm choking at the expense of replacing all the software I need! Anything I buy new will be Windows 8 which none of my old software was compatable with - same as when I have to previously rebuy it because none of my XP software was compatable with Win7! But on the plus side, I'm assuming if I install my new HDD on my old lappy, I can also install Ubuntu to the new HDD so at least my 11yr old son can browse and surf on it via Ubuntu.
Can anyone answer/help with any of the above problems? Many thanks in advance.
This question was solved.
View Solution.

You do not need the license key when using HP Recovery Discs.If you didn't create a Recovery Disk set using the software installed on the laptop refer to the article here>> Looking for Recovery Discs?
If you have difficulty, contact HP in your country / region through the HP Worldwide Support Portal to check on the availability of Recovery Discs for your computer.> Worldwide Support Portal
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Compaq presario cq61-411wm no booting device error/"hard disk not exist" help!!

screen is cracked so hooked up a external monitor. no bootable device error in white on black screen. did tests all passes except hard disk. this one gives " hard disk not exist" error..trying to save all my pix of my sons on computer.someone please help!! thanks in advance!! =D

Did you drop the laptop? If the computer is not "seeing" the hard drive your only hope is that the hard drive got knocked loose and is still good, just not connected. Otherwise a drop that can crack a screen may well have also killed the hard drive.

Hard drive not exist

Took me ages to get this far on the site, too many loops holes to back where you started! Just strange why it gives you an option to email HP but you can't :/
Anyway... I clumsilly dropped a book on the trackpad of my HP Pavilion dv6-3123sa the hard drive test reveals that my drive does not exist and I just cannot get into the drive at all to try and recover it. So can HP help me with my drive? My notebook is out of warranty and I'd like to know how much it will cost to fix the drive or have a replacement equivelent that has all the HP stuff on it.

Hi:
You can try to remove and reseat the drive. It may have jarred loose in the fall.
More than likely it is broken though and you need to buy a replacement.
A good replacement drive would be this one at the link below:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136856
You cannot buy a hard drive from HP or anywhere that already has the operating system and software installed.
If you want that, you need to order a set of recovery disks for your notebook.
See the link below for info on how to do that.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en
You can also make your own windows 7 installation DVD, but you will have to live with whatever software is available for download on your notebook's support and driver page.
Here's how to do that...
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Paul

Hard Drives Not Mounting - Help!

Hello,
This is my first post, so please forgive me if I leave anything out....
I recently had to replace my hard drive. Got it all going, then I noticed when I went to put a music CD in, that it would not show up. I tried others with no luck....then I put in a cd with data, and it showed up on the desktop....
While trying to mess around, I made my 2 LaCie external hard drives go away! I have tried checking cables, and they come on when the computer does, they don't show up in system profiler....
Please let me know what information you might need to help me diagnose these problems....my computer has been so good to me, I want it back up and running...
Powerbook G4 Ti 667 MHz Mac OS X (10.3.9) 512 Ram

Hi, mcholley, and welcome to Apple Discussions.
I can't suggest any remedy for your optical drive not reading audio CDs but having no trouble with data CDs, except to say it's apparently a software problem, not hardware-based.
After replacing your hard drive, did you reinstall your operating system from scratch on it, or did you restore your OS from a backup you had made?
The disappearance of your external drives (are they USB or FireWire?) may be power-related. Are they externally powered, or are you powering them from the USB or FireWire bus? If they're bus-powered, are you connecting both of them at once? That won't work: together they demand more power from the bus than it can supply, and while they may spin, they won't mount. Connect only one of them at a time. Is either of them detected by Apple System Profiler when just one is connected to the Powerbook? Does it mount on the desktop then?
If you've been able to connect both drives to the Powerbook at the same time in the past, and both have mounted OK, then there's been some hardware change recently, other than your hard drive replacement, that has caused the loss of external drive detection. Is it possible that during your recent operations you've turned off one or both of the external drives, or disconnected it/them from the Powerbook, without dismounting it from the desktop first? Depending on what, if anything, the drive was doing at the time, that can make a FireWire drive unmountable and all the data on it inaccessible. In that case it may be necessary to erase and reformat the drive. I don't know whether the same is true of USB drives.
Do you have another Mac to which you can connect the drives, to see whether they show up on it? If they do, you might have to consider the possibility that the port(s) to which you've been connecting them on your Powerbook is bad.

"hard drive not exist" depending on installed HD (works in one, not in the other)

This is a problem I've never had before... This is not my laptop, so I don't know the previous state.
I had to replace the system board on a g60-600 because it would not power on. Ordered a new one, swapped it out, and now it turns on. Yay!
However, no hard drive is found. This is where it gets fun...
I am going to refer to the laptop I worked on as Laptop A with hard drive A. I have another laptop/drive that I will call B.
Hard drive A is NOT detected when installed in laptop A.
Hard drive A is detected when installed in laptop B.
Hard drive B is detected when installed in laptop A.
Hard drive B is detected when installed in laptop B.
CMOS was all reset when the system was dismantled.
-- When I first turned it on I got a Checksum error; I entered in the current date and time with no luck.
-- I unplugged the system, removed the battery, and held the power button for 1 minute. No joy.
-- I disconnected the battery for 10 minutes to reset everything again. Still nothing.
-- I have reseated the drive multiple times with no improvement.
-- I assume that the new motherboard does not have an updated BIOS; I'm trying to figure out a way to update it if a new one exists (haven't checked yet).
Any ideas?
Thanks,
Kyle
(edit for typo)

And now it works. I reset CMOS again and reseated the hard drive again. That's officially the 6th time I did that. Ah well, I just wish I knew what changed.
Now Windows is giving me "Your computer was unable to start" but that's another issue all together.
Cheers!
-Kyle

My BIOS declares " HARD DRIVE NOT EXIST"

Dear collegues!!
please tell me what should i do, in such a situation....

Yes indeed, seems to me like your HDD went Poo Poo on you!
Hopefully you ave made recovery disks, and the better option would be a Mirror Image.
I had 3 Seagate momentus 7200.4 FAIL the SMART TEST in the 1st 7 months of owning my laptop.
HP finally replaced it with a Hitachi the last time it came back from warranty repair.
I replaced the HDD with a SSD,
The 2nd SG drive was replaced with the Hitachi,
GOOD BY SEAGATE!
> Was your question answered? Mark it as an Accepted Solution!
> See a great post? Click on the white star and give it a Kudos!

Advanced Format Hard Drive not recognized by HP DV6000 Controller

Hello,
I have an HP DV 6000 laptop (6276 I think, I'm at work can't check) that came preinstalled with a Western Digital 160gb 1.5gb/s 5400 RPM drive (Vista) that failed a couple of weeks ago. So i bought a Western Digital 750 GB WD Black SATA III 7200 RPM 16 MB drive to replace it. I read about people having some problems with Advanced Drive Format hard drives not being recognized by their controller, but also read that depending on the controller and specific Dv6000 model laptop they had-one wouldn't run into problems.
Well sure enough, when attempting to install Windows 7 I received the error that the hard drive was not detected. After researching online I came across an article on WD's site that noted
"Our SATA II hard drives use autospeed negotiation. This enables our SATA II drives to automatically detect the motherboard data transfer rate, making it backward compatible with SATA I data transfer rates. However, some older SATA I controllers are unable to support autospeed negotiation and cannot recognize the drive. This “drive not detected” condition occurs when a chipset is incapable of correctly negotiating the data transfer speed with a SATA II hard drive."
my drive is a SATA ||| but I'm pretty sure it's the same problem. The site goes on to say a fix would be to "purchase and install a third party PCI or PCI-Express Second Generation Serial ATA controller card for your Serial ATA hard drive(s)."
My question(s) are.
1)Is the problem that I am trying to install a Sata ||| hard drive on a laptop with a controller that will only recognize SATA | hard drive?
2) Or is the problem that the hard drive is an Advanced Drive Formatted hard drive and I need to buy a hard drive with out that specification?
3) Or Should I buy a SATA controller card as WD suggests on their website and if so will this definitely allow my laptop's controller to recognize the new hard drive and proceed with the installation?
4)Or Should I just return the hard drive and buy a SATA | non Advanced Drive Format hard drive? (question 2 basically)
Thanks for your help!

Hi @jasmine00
Welcome to the HP Support Forums.
I certainly understand your issue with the drive upgrade. Unfortunately it is a bit of the nature of notebooks, the sacrifice of a large amount of upgradeability, in exchange for compactness and portability. Whenever a new technology comes out, older notebooks are never really going to be easy to upgrade, it at all. Normally the unit as a whole is tested with a set list of hardware, and only those items are supported.
That being said there is this document that could be helpful with your problem.
Preparing Advanced Format hard drives for Microsoft Windows installations on HP Business Notebook PC...
And for your reference:
HP Pavilion dv6000 Notebook PC Maintenance and Service Guide
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

External hard drives and application help

i am relatively new to the world of computers and what i can do .i'm getting an external hard drive not only to back up my mac but to allow me to add new virtual synths for my music creations ,as i am running out of space on my internal hard drive i want to download applications to the external hard drive .if i do this will i be able to run the application on my mac through my sequencer or would i have to get a new internal hard drive with more storage.for example i'd like to upload omnisphere to the external drive and use the vst through my mac .will this work ? thank you in advance to anyone that can help

Ditto to what Andy said.
You might be better off getting two external HDDs; one as a dedicated data drive for your Home folder and the other as a backup for your entire system. Do not put your data and the backup on the same drive. Putting the Home folder on its own drive will free a lot of space on the int HDD for apps.
Here is how to move the Home folder with all of your data to an ext HDD and have Mac OS X recognize it;
Here is a more detailed version of moving the home folder that I created in the past for this situation;
1. Go to Macintosh HD/Users/shortname/. Shortname is your Home folder and will have a "house" icon. Copy this folder to the ext HDD by drag & drop. When dragging & dropping from one drive to another the originals are not moved, merely copied to the new location. At this point the folder will not have the "house" icon, because it is not yet recognized by Mac OS X as the active Home folder.
2. Go to System Preferences/Accounts. Click the padlock in the lower left and enter your password to unlock the Accounts pane. Control click on your account's name in the left-side column to reveal an Advanced Options in the contextual menu. Click Advanced Options.
3. You will only be concerned with the Home Directory option. This is the path that Mac OS X uses to locate your home folder when you login. It will show the path as /Users/shortname.
Click the Choose button and browse to the Home folder that you copied to the ext HDD in Step 1. After you select the new home folder the Home Directory path should change to something similar to /Volumes/shortname.
4. Click OK on the Advance Options dropdown sheet to accept the change. Quit System Preferences. Restart the computer and login as normal.
5. To confirm that the copied home folder on the ext HDD is now the active Home folder, using a Finder window browse to the folder on the ext HDD and confirm that it now sports the house icon.
6. You have successfully moved your Home folder to the ext HDD, then the original Home folder in Machintosh HD/Users/shortname/, including all of its contents can be safely deleted.

MacBook Pro 2010: Flashing folder w/? on not responding to startup keys & I'm trying to install a new hard drive, can anyone help?

MacBook Pro 2010: Flashing folder w/? on not responding to startup keys & I'm trying to install a new hard drive, can anyone help?

Thanks. It started up com that disk but when I went to install it had an error message (didn't get to write out what it said). So I attempted to restore from time machine but it said there was no space, even though it's a new (replacement under warranty) HGST 1TB HD, so I did what I think was right and tried to partition the disk but it now says 'Partition faild...POSIX report...cannot allocate memory'. im not sure what to do, and I'm trying to remember how the previous hd was installed and formatted for use but that was over a year ago now. Should have erased the hd first or something?

Usb hard drive not loading after security update

usb hard drive not loading after security update
I can't seem to find any other posts about this problem.
I have three external hard rives connect by a USB hub to my iMac.
Problem is that if I turn on the hard drive(s) AFTER start up I get a message that the drive either was not recognized by the OS or that it was ejected unexpectedly.
I get the same issue but not all the time if I turn them on before I boot the iMac.
I used the disk drive utility to "repair" the drives but they always come back as "probably ok".
If I restart the iMac with the drives connected (on), it seems to work but not all the time.
A bit annoying as I am wondering if the drives are OK or not.
I don't always need the drives as they are for backing up images from my camera using Apreture.
This all began after i did the latest security update.
is the update to blame?
mahalo.

Yes, you can still use those instructions to reset the PRAM.
You said that you booted to your install disk and that your primary drive did not show up at the Select a Destination screen? That usually means that the computer is either not recognizing your partition, or it's not recognizing the hard drive itself.
Start with this article and follow all the steps even if you already tried them. I suspect that you'll get to step 4 and you'll end up having to call Applecare. If you haven't done those steps, they're most likely going to make you do them anyway, so you might as well get them done before the call.

Hard drive not recognized during windows server 2008 setup

hard drive not recognized during windows server 2008 setup

Hi,
Whether the hard disk is recognized in BIOS?
Connect it to another computer to see if it could be recognzied incase the cause is the disk itself. Also please check if it is really a RAID instead of a single hard disk - a single disk should be recognized directly while RAID cannot be recognized until
a suitable driver is installed.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD. When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help!

My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD. When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help! Thank you!
I've also been getting an image with the folder and question mark. I've tried everything on the apple support page but it doesn't seem to work either.

Well, I tried all of your suggestions and they didn't work -- no surprise because I was trying to backup to my external c.d. disk. Duh! The application for the home is in the mail.

2 external hard drives not recognize by system all of a sudden

I have 2 external hard drives, one was used as a backup with Time Machine, the other was all my music storage, including Logic Pro and Ableton files.
This afernoon I was working on my Macbook pro with no problems, system backed up a few times. I was working on a new project in Logic. I saved the file, disconnected hard drive, went to my 2nd computer, an Imac from late 2009, plug the hard drive in, system does not recognize it. I wait a few minutes then unplug the drive, upon doing that I get a message that I've never seen before:
"Because a USB device was drawing too much power from your computer, one or more of your USB devices has been disabled.
To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."
It's been a few hours, I've disconnected all the devices, I think I figured that one of the drives is faulty. My question is, why is the other hard drive not being recognized, it's not recognized on any of my 3 computers, 2 Macbook Pro's and one imac.
Any help would be greatly appreciated as this is extremely frustrating.

Try this:
Intel-based Macs: Resetting the System Management Controller (SMC)
If it doesn't help, make a "Genius" appointment at an Apple Store to have the machine tested.

RE: My DV6-6b27nr said my hard drive not exist HELP!

Similar Messages

Maybe you are looking for