Re: my notebook doesn't display the red color

I think I have the same or a similar problem. I have a AMD A4-6210APU with radeon r3 graphics 1.8 ghz running 64 bit windows 8.1.
Since updating the graphics driver last week I have noticed the colour red seems more pink or purple. This is particularly notable as a lot of my buttons and icons contain scartlet as the principle colour. I only purchased the laptop in August so I doubt this is due to a deteriation of the hardware and therefore seems to be an issue with either the display driver or the display settings.
I have attempted to rectify the problem by resetting the display settings to default.
This partidular model does not appear to have any contrast settings built into the controls, therefore I have no way to adjust the colours manually.

Hello @pittstop,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook doesn't display the red color on the screen, and I would be happy to assist you in this matter!
To ensure that your system is installed with the correct graphics software, I recommend installing the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 8). Once the software is installed, please update the chipset and graphics drivers Using HP Support Assistant (Windows 8).
I would also encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

Text in Illustrator CS6 displays the red plus sign but there is no overset text. How can I remove?

I have some text blocks in Illustrator CS 6 that display the red plus sign that indicates overset text but there is no overset text. It occurs in files that were created with earlier versions of Illustator and now we are reworking them. It can't be deleted. I have cut the text in the box and pasted it into a new text box to no avail. It is not a screen artifact. I have tried copying everything in the file and pasting it into a new file and the little red plus sign comes along. It doesn't print, of course, but is driving me crazy...

I just tried, but the text is point type, not area type, so expanding the box makes the type bigger and doesn’t show extra space that might be there. Looking at the hidden characters doesn’t show any extra returns. I also have a few of these plus signs that seem to be completely disembodied, just floating in space apart from any visible text. Thanks for your suggestion, though.
Amy
starry-logo-Fifth-Press
Amy O'Donnell
Fifth Press
444 East 200 South
Salt Lake City, UT 84111
801.433.6274
<mailto:[email protected]> [email protected]

WEB.SHOW_DOCUMENT sometimes doesn't display the generated PDF file

Hi all,
I'm using the following code to generated my report from Forms: 
V_REPORT_ID := FIND_REPORT_OBJECT(V_REPORT_NAME);
V_REPORT_SERVER_JOB:= RUN_REPORT_OBJECT(V_REPORT_ID,P_LIST);
 V_JOB_ID := substr(V_REPORT_SERVER_JOB,length(:GLOBAL.REPORTS_SERVER)+2,length(V_REPORT_SERVER_JOB));
 V_REPORT_STATUS := REPORT_OBJECT_STATUS(V_REPORT_SERVER_JOB);
LOOP
 IF V_REPORT_STATUS = 'FINISHED' THEN
 V_TMP_PDF := :GLOBAL.APACHE_HTML_FOLDER ||'rpt'|| V_JOB_ID ||'.pdf' ;
 COPY_REPORT_OBJECT_OUTPUT(V_REPORT_SERVER_JOB, V_TMP_PDF );
 WEB.SHOW_DOCUMENT(:GLOBAL.AS_HOME_URL || 'rpt'|| V_JOB_ID ||'.pdf' ,'_BLANK');
 END IF;
END LOOP; 
Everything works fine except the WEB.SHOW_DOCUMENT part. In some clients, this command does what it required from it and opens a new browser window with the PDF report displayed on it. In some other clients, this command does nothing: now window dispalyed. When I refer to the Application Server, I see the PDF report successfully generated there. When I put the URL of the generated report manually in the browser address, I can see the report.
 
Why the WEB.SHOW_DOCUMENT doesn't display the generated PDF report in some clients?

I agree with the previous 2 posters.
Also firefox and ie handle it differently. Make sure you test on what your clients use.
Sometimes acrotray.exe is completely retarded and doesn't work.

Has Mozilla changed the way Firefox displays @font-face enbeded fonts? The site I'm codeing works in Safari, Chrome, and IE, but Firefox 8.0.1 doesn't display the embeded font.

Has Mozilla changed the way Firefox displays @font-face enbeded fonts? The site I'm codeing works in Safari, Chrome, and IE, but Firefox 8.0.1 doesn't display the embeded font.

No problems here with the H1 headers.
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

My iphone 6 doesn't display the battery duration values

My iphone 6 doesn't display the battery duration and standby in battery settings, and replaces the values with - even if I completely charged my battery last time. Can someone help me?

Try these two:
Restore from backup
Restore as new
http://support.apple.com/en-us/HT201252

After updating iPhoto to 9.2 Photoshop CS2 doesn't display the photo I have opened. The photo shows in the Navigator on the side panel, but not on the screen. MFF

After updating iPhoto to 9.2, Photoshop CS2 doesn't display the photo on the desktop screen, even though the image is shown in the Navigator pallet well to the right.

No, that is the problem. I don't see how it should be, but that is what happened after I did the upgrade, which was for iPhoto 9.2. The upgrade then required that the Library be upgraded. Then CS2 stopped showing the photo when I opened CS2. Maybe there was a system upgrade for the whole system, that went along with 9.2. Before the upgrade CS2 worked. I even tried photos that I had on backup disks, and they wouldn't show in CS2 even though I had draged them to the PS icon in the dock. These photos were not on my computer when the Library was upgraded. I even tried photos fresh from the camera. Elements 9 does work to open the photos.

Bank transfers: the file DME doesn't display the name of the company

Hi all,
In the DME file created by t.code F110, the record 20, doesn't display the name of the company which orders the bank transfer.
Where should I put it?
Thanks

Neeraj,
Its ECC6.0 and I upload the file by going into their website and putting userid and password and then upload the fiel over there and click send.Is there any possibility the file contains any hidden characters which we dont see? where should I send you dummy file whats your email id.
Regards
Shaun

Every time I try to access the ASPX pages, the browser doesn't display the pages. Instead, a popup box asks if I want to open or save

every time I try to access the ASPX pages, the browser doesn't display the pages. Instead, a popup box asks if I want to open or save

What site is doing this? 99% of the time it is a problem with the headers sent from the web server.

Some browser doesn't display the MW page correctly

after installing Maintenance Wizard 2.17, some browser doesn't display the MW page correctly, some menu function is missing. The display problem is not for everyone, some user's browser have no problem. Some user's IE are displaying it correctly. i.e. one user has both IE and firefox working, however, after she clear her java cache, both browser refuses to display the MW page correctly.
The resolution of PCs is set to the same value. however, the size of the text isn't. after changing the size of the text, some of our pc start to work. The display web page for MW doesn't show the right most menu item. After resize the screen, we find it is because of the blue frame for the MW page that stop to dynamical stretch up to 20 inches.
The menu item is been streched out of the blue frame, they are no longer displayable
any ideas?

We have the same problem.
And find it is caused by a combination of your screen resolution, font size and browser window size.
The blue frame that displays the Oracle Mainentance Wizard banner doesnt dynamical strech to the full window size.
After experiment with it, MW can display much better in our case.

Verify_function doesn't display the error messge in oracle forms

We are planning to use the verify_function to validate the password when user password is expires.
The users are using Forms 6i on web.
When I set the profile to user verify_fucntion and then try to change the password with the default password change window , it doesn't display the error message if the crieteria doesn't match. Instead it just clears the screen. So the user doesn't get any idea what's going on.
has anybody seen this. We are trying to utilize the default password change functionality instead of coding our own.....in forms
Thanks,
Dj

It can be that the spry:content does not support the function::<syntax> or that your impelementation is wrong. You can try this:
spry:content="function::FormatDate"
Like you would implement the function statement in the spry:if statements.
If that doesn't do the trick you need to modify the SpryData.js if you need this kind of support.

IMac running 10.8.6 doesn't display entire desktop? Reset display to various options and it doesn't display the entire desktop.

iMac running 10.8.6 doesn't display entire desktop? Reset display to various options and it doesn't display the entire desktop. (asking for a friend, not my iMac)

I think you wanted to say 10.6.8. 10.8.6 does not exist.
The first thing I think is that zoom may be enabled. On Mac OS X 10.6.8, a way to disable it is to hold the Control key and scroll down with the mouse or trackpad until you can see the whole display. Another way would be to disable zoom in System Preferences > Universal Access

My iphone 4 music player doesn't display the arabic songs names ?

My iphone 4 music player doesn't display the ARABIC songs names ?

ok i found the solution here by deleting the corrupted library
http://portablevideo.blogspot.com/2008/12/music-player-database-problems.html
now one of these below is for the music and one for the photos and i didnt have a problem with the photos but did it anyways and now the player can see my music:
these are the files that need deleting in order to get rid of the corrupted library.
Storage Drives: (Mass storage E, Memory Card F)
\private\101ffca9\harvesterdbvx_x.dat
\private\10281e17\[string]mpxvx_x.db
\private\10281e17\[string]pcvx_x.db
TIP: Connect the device in USB mass storage mode (File Transfer), to locate the private folder from the PC.
TIP: STRING and x_x will change depending on your phone. (my files had slightly different names than above on the n97)

How to create a task list view in c# that doesn't display the timeline

How can I create a view for a task list using c# that doesn't display the timeline. I want to do this using server side code but I can't seem to find a view property that will hide the timeline. I know how to do it manually through the UI but
I need to automate it.
Caroline

Hi Garoline,
We can set ViewData of the view to empty to achieve your requirement. The following code snippet for your reference:
using (SPSite site = new SPSite("http://sp2013sps/"))
using (SPWeb web = site.OpenWeb())
SPList list = web.Lists["TaskList"];
SPViewCollection allviews = list.Views;
string viewName = "Test View";
System.Collections.Specialized.StringCollection viewFields = new System.Collections.Specialized.StringCollection();
viewFields.Add("Checkmark");
viewFields.Add("LinkTitle");
viewFields.Add("Due Date");
viewFields.Add("Assigned To");
string myquery = "<where><gt><fieldref name='ID' /><value type='Counter'>0</value></gt></where>";
allviews.Add(viewName, viewFields, myquery, 100, true, false);
SPView view=list.Views[viewName];
view.ViewData = "";
view.Update();
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

App for audio recording on ipad that doesn't have the red status bar.

I need an app that still records audio but doesn't have the red status bar that shows I'm still recording when I exit the app. Does it exist? I have heard apple apps require the red status bar to be there.

You need to have the capability to export the presentation in a format your teacher can use. Ask your teacher what format she wants the presentation in. If she wants PDF then you have to send her a PDF file. If she wants something else send her the presentation in that format.
Be warned that not all apps supporting opening presentations preserve or support all layut and formatting. The best approach to ensure your presentation looks as you intended when she opens it is to write it in the same app she will be viewing it.
It is not unreasonable for the teacher to specify a format/application. Otherwise a teacher with 100 students could find herself having to deal with multiple apps, formats, standards, layouts, being sent to her.

Can someone tell m why my iPad 2 doesn't display the YouTube app? I'm so confused. It is a standard app n the original iPad.

Can someone tell m why my iPad 2 doesn't display the YouTube app? I'm so confused. It is a standard app n the original iPad.

Well you already know the answer, but it was not included in iOS 6. Google released an YouTube App for the iPad so you can download that in the App Store.

Re: my notebook doesn't display the red color

Similar Messages

Maybe you are looking for