Re: My Satellite laptop wont load up

Hi
My laptop is not even a year old yet, it has been working fine until today.
I switch it on and the Toshiba bit comes up then after that its just a black screen, and then it says
realtek rtl810ie/8102e pci-e ethernet controller v1.07 (080320)
pxe-e61 media test failure , check cable
pxe-mof exiting pxe rom.
no bootable device - insert boot disk and press any key
I dont have a boot disk or anything! Does anyone no what this means?
Thanks for any help
Layla

Every notebook has specific boot order and in this boot order are different hardware components like optical disc drive, hard disc drive or LAN.
The boot up is always defined in BIOS settings and there is, for instance boot order HDD, LAN and ODD. If notebook cannot start from HDD ist starts from second defined device (LAN) and go on.
Boot order in your Satellite notebook is not known to me but somehow it stays on option to boot-up from LAN device and you can see this message on the screen.
Start your notebook again and press F2 several times to enter BIOS settings. Set it to default and try again. if the same happen start notebook one more time but this time with F12 to enter boot options. With up and down arrows chose HDD device and press enter. If HDD is OK operating system should load up. If not there is some problem with preinstalled OS.
Please test it and send some feedback.

Similar Messages

  • My laptop wont load past the spinning wheel when turning on

    Please Help!
    When turning on my laptop it wont load past the start up screen with the loading wheel.. please can someone help me fix it!?

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • HELP! laptop wont load past Welcome and warranty out

    I have an HP Pavilion g6 with Windows 7 Home OS. I have no repair disc/install disk as I bought it brand new with the OS already installed and ready to use.  I bought it in Fall 2011, so my warranty is out and I can't get help from Tech because they want to charge me just to talk to me over the phone without a warranty. 
    My laptop will load until the Welcome screen, and I have seen many posts already about this issue, however they are all able to load in Safe Mode and/or still have their warranty. I cannot load in Safe Mode. System Tune-up will not complete, stops halfway through as Failed, Startup and Run-in tests also fail. I already had problems back in March this year and had to restore to factory settings.  
    What boggles me most, is it was working fine until 2 a.m. this morning, when i stopped playing Fallout NV - was offline, have not connected it to internet for some months now. However, after the game I unplugged my laptop and took it upstairs and plugged it in in my room, and since then it hasn't worked. I can get to the boot options (Esc, F2, F8, F9, F10, F11, F12), but unable to do system repair due to no disc, and even though when I restored it to factory settings in March and made sure to do a Restore point at that time, the OS is not finding that restore point at all. It is not acknowledging any external hard drives I attach so I can do a new restore point. I don't want to just lose my photos - they are the only photos I have of my children (i think this is why most of us don't want to just restore to factory settings all over again).
    Is there any way to do get it up and running again without losing literally EVERYTHING? I don't give a crap about the games or apps, those can all be installed from Steam later on again. But i don't want to lose my photos and baby vids and documents.
    Thanks in advance,
    Ree

    Hi Ree,
    Here are a couple of methods you could try to back-up your existing data.
    1.  One possible way to try and retrieve your files from a non-booting drive is to follow the process detailed in the link below.  The Ubuntu operating system CD you create can run from the CD alone ( ie it doesn't have to install on the Hard Drive ) and I've often found it to be successful in retrieving data even from a failing Hard Drive.  When you've created the CD, follow the instructions and see if you can back up your existing files. 
    http://www.howtogeek.com/howto/windows-vista/use-u​buntu-live-cd-to-backup-files-from-your-dead-windo​...
    2.  Another option would be to remove the HDD, place it in an external caddy - an example is on the link below - connect this to another PC and see if you can access your files.
    External HDD Caddy 2.5".
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • New satellite laptop wont view in full screen while on internet

    I have a satellite L305-S5919 and when im trying to watch a video or something i can watch it but when i try to view it full screen i get a blank page but i can hear audio. Im not quite sure if its an internet thing or its my laptop. I had a desk top first and i could view things on the full screen. But when i switch it to the laptop i have to watch it on the regular window. please help thank you

    Satellite L305-S5919 
    Assuming you're using Adobe's Flash Player, there's a bug in it for Vista.
    While the video is playing, right-click on it and click Settings. Uncheck the box for Enable hardware acceleration.
    -Jerry

  • My Satellite C wont load Windows - error code 0xcoooooe9

    Hi,
    get a status error come up when the laptop is turned on. The error code is 0xcoooooe9, windows does not load up and the diagnostics tool does not work.
    Tried to recover to factory settings but this crashed out saying partition could not be created and only had an option to turn the laptop off.
    Was bought from argos's ebay store less than 12 months ago and should still be under warranty but can not find out if it is on here.
    Any help please ??
    Message was edited by: MasterG

    On this virtual way it is not easy to say what the problem is but maybe HDD make problems.
    I recommend you to contact nearest Toshiba service provider and ask for help. They can check it.
    At first clarify the warranty and I hope they will fix it for free.
    Phone numbers and addresses you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  • Laptop wont load warranty expired a month ago

    i have an HP 2000 notebook pc. product id is D1E81UA#ABA. serial # [edited by Moderator]. as mentioned above my warranty expired about a month ago. when trying to load my laptop i recieve a screen that says preparing automatic repair. a few seconds later it goes blank. im not sure whats happening. i was recieving a blue screen telling me error code 0xc000185 but now its just going to a black screen. help please

    Hi @tommy62278 ,
    Thank you for visiting the HP Support Forums.I needed to edit your post and remove the Serial Number. In Accordance with our Rules of Participation:
    Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
    If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
    Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
    Thank you
    George
    I work for HP

  • My laptop wont load firefox, it keeps saying my proxy server could not connect firefox. Why is this, it was working earlier.

    Every time i try to open firefox my laptop tells me "The proxy server is refusing connection". This has never happened before. I updated my norton antivirus and firefox has not worked since.

    In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".<br />
    You can find the connection settings in Tools > Options > Advanced : Network : Connection<br />
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * [[Firefox cannot load websites but other programs can]]

  • Satellite L300 wont load up

    Hi all,
    Ive got a L300 that wont open up, Ive tried to do self repair but it gets half way through and it just freezes. Ive tried the re-boot discs but Ive had no joy.
    Now Ive taken it to a computer repair shop who said that the hard drive is defective.
    What do you guys think is that correct?

    If you were not able to install OS using original Toshiba recovery DVD it is possible that HDD is defective.
    HDD exchange is not complicated and you can do this alone.
    At the bottom side you will see HDD cover. Remove it and gently move HDD to the side and then you can remove it completely.
    Buy the same one, built in HDD caddy and put back into the laptop.
    Use recovery disc again and install OS.

  • Help, my laptop wont load

    My keyboard on laptop started acting weird, I updated the driver, still weird, I tried to change the language, nothing. I restored,  turned off, then turned it on and without pressing anything, it typed a password and deleted it, I tried to type but nothing, restarted and it helped at me and turned itself off.  I turned it on again, same thing happened.  
    I need help with it as it was expensive present from my brother, I need it to work, please help, 

    Hello jezz1
    Welcome to the HP Forums!
    I understand the computer does not load. I will do my best to assist you! To troubleshoot the issue, please let me know exactly what happens when you try to load the computer. Additionally, please provide the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Have you installed any new hardware on this computer, before the issue appeared?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    Thanks for choosing the HP Forums. Have a great day!
    Mario
    I worked on behalf of HP.

  • NRL LIVE on laptop wont load and yes i joined on the NRL website

    Hi I am trying to wath the live NRL. I joined on the website but all I can do is listen to the abc radio option or watch highlight replays.... The "watch live" text does nothing. Where is the actual link so I can open it up? Screen shots could help? Or Telstra do you want to tell me what to do?? I am watching on my laptop.  Thanks

    Recommend checking out the information here: http://crowdsupport.telstra.com.au/t5/NRL-2015/Please-read-this-before-posting-any-new-questions-about-NRL/td-p/476183 for some initial troubleshooting.
    If you have tried this, please let me know. 

  • Hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!

    hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!

    kaylsk1 wrote:
    udated and its on 10.6.8 yet still no change
    Your signature in 1st post was 10.8.2.
    You went backwards?
    Did you reformat and reinstall when you first purchased it?
    If not I HIGHLY recommend you do that before you do anything else.

  • I downloaded songs to my phone at xmas and when i plugged in to my laptop it wiped the phone of new purchases when i try and download them to my computer in itunes via previous purchesses it wont load the list and i keep getting error 10053 can any1 help

    i downloaded songs to my phone at xmas and when i plugged in to my laptop it wiped the phone of new purchases when i try and download them to my computer in itunes via previous purchesses it wont load the list and i keep getting error 10053 can any1 help

    Syncing shouldn't trouch you photos unless you have photos in a Photo Library album.  These would be photos that were synced to your phone from your computer.  If you do have any, you'll need to use an app like PhotoSync to transfer them to your computer prior to syncing.
    If you prefer to backup your camera roll photos prior to syncing, open iTunes and go to Preferences>Devices and check "Prevent...from syncing automatically".  Then connect your phone to your computer and import them as explained here: http://support.apple.com/kb/HT4083.
    Then, to minimize data loss, follow the steps in this user tip: https://discussions.apple.com/docs/DOC-3141.  To follow the steps, first open iTunes and go to View>Show Sidebar.  Also, Transfer Purchases is now located in File>Devices.

  • Satellite L10-151 wont load XP or recovery disc

    Hi
    I have a Satellite L10-151 model and it wont load windows. Every time I try and start it, it says operating system not found. When I put the Toshiba recovery discs in that came with the notebook and I also bought a windows XP disc that wont load either.
    I have also taken the hard drive out and put another one in and it works fine so it must be the hard drive but dont no what.
    I have also tried installing windows 7 that doesnt work either :s
    Please help? The HDD has everything on it.

    Hi
    In my opinion the CD/DVD drive cannot read the inserted disk and therefore its not possible to boot and to install the new OS.
    It could be an problem with the CD/DVD drive or the ODD is not able to handle this one recovery disk
    Try to copy/burn the recovery disk using another computer.
    Possibly the notebooks CD/DVD drive would be able to handle this second disk and you could be able to install the Win XP
    From my experience this helps in many times especially if the issue is related to the ODD
    Greets

  • Please help with home sharing on 2 laptops, one loads why wont the other one load content?

    Have  got home sharing activated on 2 laptops. my husbands laptop has loaded my library no problems, when I try to load his it goes to do it but the library doesnt appear. what am i doing wrong?

    https://support.mozilla.org/en-US/questions/920518
    thank you

  • Re: Satellite C850D wont start-up

    Hi
    Yesterday my Toshiba Satellite C850D laptop with Windows 8.1 did an update when I turned it on, it took a while and once it got to 100% it said it ran into a problem and needed to restart which it did with no worry. It worked fine all day, didn't miss a beat. Then this morning when I turned it on the normal Toshiba logo popped up but then a greyish coloured screen with a flickering small line in the top left hand corner appeared and it wont load further then that screen.
    Every button on the keyboard I press makes a loud beeping sound. I have pressed f2 and f12 as it tells me too under the Toshiba logo to no help. Could this be from the update? Also can someone please try and help me?
    Many thanks.

    I would recommend you to start the system repair function.
    Power up the unit and press F12.
    Now you will see different bootable devices as well as the HDD recovery.
    Choose this option.
    Details:
    http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
    Then you will get new menu providing different options. Here choose: Troubleshoot and Advanced Options. In Advanced Options choose Automatic repair
    Hope this fix the problem

Maybe you are looking for

  • Bind to report server problem

    hello all please i want your help of my case that iam trying to run areport from aform both are (10g). the problem is when calling the report from a button in aform with this code in the ''when_button_pressed'' trigger web.show_document('http://local

  • Error while loading master data from R/3

    Hi Friends,             I'm just trying to load master data for the infoobject of type "0BUS_AREA", but i have got data into PSA, but not got into char, i have got an error stating that Record 1 :No source system ID exists for source system (logical

  • Adjustments made in LR 2.1 are not Showing up in Bridge CS4

    I thought that I had read somewhere that LR2 and Bridge CS4 were aware of each other and photo settings made using one application would be seen by the other. I can tell you that CS4 is not reading ratings, color labels, and ACR settings made using L

  • Lock On OBJ$ Dictionary Table

    Hi, I am running a create table as select * from table_name using a database link. The statement runs ok when I run it from sqlplus, but when we run it from a java client (oci / thin), there is a lock on a dictionary table OBJ$. The result is that I

  • Some images just wont import into library

    Nothing unusual about them - jpegs, short file names, but IPhoto is saying not in right format and refuses to import. Ruddy annoying.....