Re: My TEAC DV-w28ECT driver used to read both DVD and CD now it only reads DVD

My TEAC DV-w28ECT driver used to read both DVD and CD now, it only reads DVDs. what happened and how can I fix it? I have Windows Vista

Try removing the CD/DVD Filters from the Registry.
When CD/DVD related software is installed (such as iTunes, Nero, virtual CD software), they install filters into the registry, which can cause compatibility problems.
1) Run Regedit (Start -> Run -> Regedit)
2) Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
3) In the right pane, delete the "UpperFilters" key, and delete the "LowerFilters" key.
4) Reboot.
If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).
This utility can remove the filters for you:
http://www.csd.toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

Similar Messages

Apple has determined that certain Seagate 1TB hard drives used in 21.5-inch and 27-inch iMac systems may fail.

Hi
I got an e-mail stating that Apple has determined that certain Seagate 1TB hard drives used in 21.5-inch and 27-inch iMac systems may fail, and that mine was one that may fail and to book an appointment with Genius to click here. So after making an appointment we then took out iMac to the shop affixing thirty minuets before appointment time and had to Waite until 12-45hrs. When we were told that we would have to leave the Mac with them for two to three days to replace the hard drive.
Can anyone advise, is this normal to make an appointment only to find that when you get to the Genius department in the Apple shop they then say because of the amount of iMacs that have come in today it will take days to replace?

Hi mende1
Thanks for replying but when anyone makes an appointment surely the work should be carried out then not to be told to come back days later especially when you have traveled over one hundred and fifty miles to get to the shops. It may have been a free replacement but the cost of petrol for the journey comes to more than one hundred euros.

Problems previewing all my sites using Dreamweaver 8 both CF and html.

I have restored my hard drive (from a previous Ghost image)
and now encounter problems previewing all my sites using
Dreamweaver 8 both CF and html.
If I preview (using localhost:8500) I get the message "Unable
to connect, Firefox can't establish a connection to the server at
localhost:8500." IE has similar message.
If I preview (using 127.0.0.1 instead of localhost:8500) I
get the page but no images or CSS loads.
An address such as:
http://127.0.0.1/CFIDE/gettingstarted/experience/index_content.cfm
loads just fine - seems CF is working okay.
All the sites used for testing locally have been used for
some time (years) and work on my unrestored drive.
My thoughts: after I restored my hard drive image I installed
both Norton Antivirus 2007 and resintalled ZoneAlarm. I uninstalled
both of the programs but the problem remains.
Any help is much appreciated. I have spent the last two days
trying to get this to work and as many of you can identify with...I
am supposed to be working....!

Hi,
JSF 1.1 doesn't coexist nicely with HTML components.
So if your goal is to build layouts in HTML then this
will not produce the result you want
Skins in 10.1.3 are slightly different than in 11
(selectors may have changed their names). If you need
to specify the class property to make skins work then
this indicates that the skin selectors you use are
not the correct ones.
FrankHi Frank,
thank you for your help, I'm replacing every html component with adf one, panelGroup, panelHorizontal, panelBorder, objectImage etc... etc... but I have a problem...
I need to put an object component about Macromedia Flash and I cannot find any adf component to replace it. Any idea please?
Thank you again.
Ciao.
Ricky

I have CS4 and was using a Canon 5D Mark II with raw photos. I just got the Canon 5D Mark III and CS4 now can not read the raw photos. It has raw version 5.7.0.213 and CS4 version 11.0.2. Can anyone help?

I have CS4 and was using a Canon 5D Mark II with raw photos. I just got the Canon 5D Mark III and CS4 now can not read the raw photos. It has raw version 5.7.0.213 and CS4 version 11.0.2. Can anyone help?

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
EOS 5D Mark II
CR2
5.2
2.2
EOS 5D Mark III
CR2
6.7, 7.1
4.1
Photoshop CS6
7.0
8.3
Photoshop CS5
6.0
6.7
Photoshop CS4
5.0
5.7
The 5D Mark II was first supported by Camera Raw 5.2 which is compatible with CS4+.
The 5D Mark III was first supported by Camera Raw 6.7 and 7.1 which is only compatible with CS5 and CS6.
So the CS4 will never be able to open Raw 5D Mark III files.
Why doesn’t my version of Photoshop or Lightroom support my camera?
Choices:
Purchase CS6 full version (CS4 is too old to qualify for an upgrade)
Join the Cloud
Free option: download the free Adobe DNG converter, convert all 5D Mark III Raw files to DNG format then edit the DNGs in CS4
Photoshop Help | Digital Negative (DNG)

I stream video/audio from my iPhone to AppleTV and it works fine. I want to use headphones on the iPhone so I can stream the video and listen on the headphones, but Airplay will not allow me to select both AppleTV and headphones, I can only select one.

I stream video/audio from my iPhone to AppleTV (like YouTube) and it works fine. I want to use headphones on the iPhone so I can stream the video to AppleTV and listen on the headphones, but Airplay will not allow me to select both AppleTV and headphones, I can only select one. How can I watch AppleTV and listen on the headphones?
Thank you.

have the same problem. Im using iPad 3 and Apple TV. id like to use the ipad as wireless earphones while i watch the video on the tv. is that even possible?

I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

Put your phone in DFU mode,
Hold the Power Button (3 secs)
Continue holding the power button and also hold the home button (15 secs)
Release the power button while continuing to hold the home button (10 secs)
Your device should prompt with the "Connect to iTunes Screen"
Restore.

I am use to working in photoshop and i now only have pages. can you tel me how to silohuette an image. i am trying to silo a head and put it on another body. thanks!

i am use to working in photoshop and i now only have pages. can you tel me how to silohuette an image. i am trying to silo a head and put it on another body. thanks!

Pages is for word processing, not image editing.
However, this may work for you > How to Create a Silhouette Image Using FREE Photo Editing Software - Home Stories A to Z

Old I-tunes accepted both my i-pods now it only accepts one and tells me that I CANNOT SYNC MY SECOND I-POD AS A DUPLICATED NAME WAS USED...DON'T KNOW WHAT THIS MEANS CAN ANYONE HELP?

Old I-tunes accepted both my i-pods - now it only accepts one and tells me the second cannot be synched as a duplicate name has been used.
There is no explanation as to what I must do to put this right....can anyone help with this? Thanks.

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

Is it useful to download both CC and CC 2014 soft versions or should I keep only the CC2014 version

Is it useful to download both CC and CC 2014 soft versions or should I keep only the CC2014 version and uninstall the CC version?
Because it is quite heavy to keep both versions of all the softs.
Thanks in advancefor your answer

If there are features you need that were dropped in CC2014, such as the oil paint filter, then by all means install both. Personally, I have uninstalled CC as well as CS 6 and earlier. I can always reinstall if I need them. Having only one installed version makes inter-program operations much simpler, as the OS knows just which program to use for opening a .PSD, for example.

Using old version CS3. Can't "see" both Local and Remote files. Only Local.

Used to see both Local and Remote files. Worked in Local and then "Put" to the Remote when ready. Only see Local now. Work in Local is saved automatically to the server. Need to go back to the work in Local and Put to Remote. What happened? How do we fix it? Thanks!

Could you post a screen shot of what you're seeing when you go to...
Site > Manage Sites > Click the site you're working on > Edit
There should be two tabs in the upper left corner of the dialogue box that comes up, Basic and Advanced. Basic walks you through set-up with a bunch of questions and Advanced allows you to just enter the info into the correct fields. If the Advanced tab is open, it should be under the Remote heading where you set your FTP info.

HT4899 I have NEVER used my icloud email address and am now getting spam mail to services I have NEVER signed up to. Should I conclude from this that Apple have sold my details on?

I have NEVER used my icloud email address and am now getting spam mail to services I have NEVER signed up to. Should I conclude from this that Apple have sold my details on?
To tell me to mark it as spam is just not good enough. I do not want this rubbish cluttering my inbox.

Nobody want to receive spam, but it's a fact of life. Apple is certainly not selling your address on to spammers, and it's possible that the spammer has been guessing at possible addresses and has hit on yours.
A good third-party program for dealing with spam is SpamSieve - after a training period it's very good at identifying spam and shunting it to a Spam folder where you can check it and delete at your leisure. It works with iCloud.

Have a 802.11n time capsule, the range of the wireless network has shrunk down to nothing over last few days. Used to be able to use wireless network anywhere in house, but now can only use in my office. Will not connect to iphones, ipad, itouch, or noteb

Have a 802.11n time capsule, the range of the wireless network has shrunk down to nothing over last few days. Used to be able to use wireless network anywhere in house, but now can only use in my office. Will not connect to iphones, ipad, itouch, or notebook. Worked fine last week, but over weekend just started having issues.

It is very possible that you may have some form of Wi-Fi interference that has appeared recently that is preventing your Time Capsule (TC) from providing a clean RF signal.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible. Look for other Wi-Fis that may be operating nearby. Note those with the strongest signals and which channels they are operating on ... then change the channel used by the TC to be at least 3-5 channels away.

External Hard Drive Partitioned to boot both Intel and PowerPC -and backup

Have been remiss backing up drives, do it sporadically and have had a few close calls and am now trying to upgrade my skills.
I work with 3 computers - 2 intel MBP Core Duo (one Leopard, one Tiger, difference Ghz, screen size, generation) and PowerPC G4-running Tiger. I read recently you can partition a drive and format one as a bootable drive for an intel, the other for a powerPC.
http://www.macosxhints.com/article.php?story=2006061610374449
I'll have to read the instructions a couple more times before I get it. But what do people think - have any of you done it? Problems?
I have a further question or questions: I saw an external drive for the Mac 1000GB at OWC!!! Yikes, there is also one for 1500 GB!!!
I wondered how many partitions I could make - can I create a bootable drive in three separate partitions, and use those as a backup drive for each? Money is an issue, I can't afford a drive for each computer, so this would be the most economical.
Could I create a 4th partition, just to move photos, music libraries without their being computer specific (e.g., check share library?)
Is there any advantage in creating a boot drive that just starts the computer, but keep the backup files separate, or is cloning the drive then doing incremental backups the best so it is both a boot drive and a backup?
This is beyond my skill set and I am still fuzzy about backup software and boot drives and how they all interconnect - so far I have just been saving desktops and font folders to my oh so slow USB EXTERNAL HD (200 MB) periodically, or specific key files. Is there anyone who can walk me through this?
Thanks
Annexit

Partition the drive using Disk Utility, I'd recommend one bootable clone partition per machine, one partition for archiving (data you want to keep but not on a machine), and optionally one partition for a Time Machine backup for the Leopard system. Use the Apple Partition Map (under options in the Partition tab). Note that you'll read that Intel machines require GUID partition scheme, but that's only for installing the OS from a DVD, not relevant for cloning. You'll want APM to boot the PPC machines. Bootable clones can be sized equal to the internal HDDs being backed up, or slightly smaller. Partitions should be formatted as Mac OS Extended (Journaled).
Personally, I have two external drives set up identically, with partitions for bootable clones of a PPC machine with 10.4 and two Intel machines running 10.5, plus an extra partition where I store movie projects. I use SuperDuper to update the bootable clones. I have two drives because I store one offsite (at work). Every few days I bring an updated backup drive to work and the other one home.

Erasing Time Machine hard drive after formatting for both PPC and Intel

Ok, I made a mistake. First I formatted a Western Digital 500 gig hard drive for both my wife's PPC G4 laptop and my own Intel MBP laptop, so we could both use Leopard's Time Machine for backing up to the same drive. That wasn't my mistake though, it's been working fine. I formatted my partition using the GUID option and hers using the Apple Partition Map option (I think that's what they are called, I'm going from memory).
Here's my mistake: I needed some extra space to store some files and read that I could Re-Partition the drive without erasing anything using Disk Utility. Sounded great. I first tried to partition my wife's partition, since she had more extra space, but then I realized that was a bad idea since I had formatted her partition with using the Apple Partition Map, so I stopped and then tried to Re-Partition my side. It worked for about an hour: my Time Machine backup drive appeared, my new partition appeared, but then... her partition disappeared! Usually whenever one of us plugs in the hard drive using the firewire cable, both partitions appear, Time Machine Goes to work, and that's that. When we need to disconnect from the drive we have to eject both drives, but no big deal. Now her drive isn't appearing.
So... I tried to repair it, no good. Tried to erase both her partition and mine (to just start over): no good. I can't do anything to either of these partitions now, from either computer. Tried everything I could think of in Disk Utility, from both computers. Won't erase, won't re-partition. Not a hardware issue: it all started when I did this stupid Re-Partition. Help!!!!
I want to erase the drive and start over. Can anyone advise??

Jasonmo,
First, let's talk about the various partition schemes. A partition scheme applies to the entire drive. Specifically, these are different maps written to the drive, within which volumes are created. As such, this is an either/or thing; your drive is partitioned using either the GUID Scheme, or the Apple Scheme, not both.
"Live" partitioning or re-sizing of existing volumes is supported only under the GUID Partition Scheme. If the drive wasn't using this scheme, you would not be able to re-size as you were attempting to do. Even re-sizing under the GUID scheme requires that the drive's maps and directory structures be in very good shape, if it is to work without hitch.
Are you absolutely certain that there isn't some physical problem with the drive, or with its interface (cables and such)? If it is operating normally, you should be able to re-partition it without problems. In DIsk Utility, select the drive (not a named volume that will appear indented underneath), then click the "Partition" tab. If you wish to be able to re-size volumes later, you must choose the GUID scheme from the "Options..." dialogue sheet. Set appropriate sizes for the volumes, then click "Apply." Doing so will destroy all current volumes and data on the drive.
Scott

Can we use NWBC with both SRM and ECC

HI
Can we use NWBC both SRM and ECC . or do i have to use EP .
Thanks,
Pooja

Hi
Hope this will answer your question
ECC Transactions in NWBC Browser SRM 7.0
Thanks,
Ashish

Re: My TEAC DV-w28ECT driver used to read both DVD and CD now it only reads DVD

Similar Messages

Maybe you are looking for