Re: Mysterious paths in pen tool appearing!

Thanks Mylenium, What about on the bottom right. If you look closely there should be only an arc but its trying to close off the path I think.
I've watched countless pen tutorials and they all say that you can jump back to you project later and contiue adding and removing paths. I must be doing something wrong!
For some reason the paths of my pen are not showing when I select everything with direct selection, nor do they show with General selection.

PF,
I am unsure whether you are thinking of a closed path or an open path (the image in post #4 seems to show just two open paths.
Either way, if I understand it in the right way, you may use Object>Path>Offset Path with the desired distance (setting the number).
For closed paths you will get one closed path outside; to get an inside path at the same distance just use the same negative number.
For an open path you will get a kind of surrounding path with straight end segments through the end Anchor Points. You can Direct Select each of them and delete, and after that you will have one path on either side at the desired distance.

Similar Messages

How do you change the color of the path the pen tool makes?

There must be some way to change the color of the path the pen tool makes from that grey color to something that will contrast with the image underneath. I found one thread about this from 2010 or so and the answer led to a dead link. This seems like it would be a very helpful feature that would be easy to implement. Someone please tell me in 2014, after a zillion version of photoshop have come out in the past 30 or so years, how do we do this? Thank in advance.

Why? When you zoom in too close sometimes it become too pixelated to see what's going on and the point on the pen become to close to each other. Why can't you change the path to a color so that it doesn't blend into the image you're trying to trace? Why is the unchangeable color one of the most likely colors to become invisible on most images? So frustrating!

How to add a 'stoke path' using 'pen tool' on CS6 (mac)?

I'm a beginner at photoshop and I'm only 14 years old. I need to know this for my GCSE project.
I'm trying to create something similar to this:
Using pen tool and stroke path, but when i use the pen tool I'm not sure how to add the stroke path like that.
I've used CS4 previously at school and when you right clicked on the path it came up with this:
I haven't a clue how to get that up on CS6 (on mac) and when you right click it, it just seems to continue adding the path. Any help?

In addition to conroys advice here is a video tutorial that might help you as well:
enjoy,
janelle

Touch pen tool appearance

How can I get the touch pen tool to appear on a file if I'm opening an image. It only appears now when I open a blank work space.

Yanina,
What happens if you File>Place (the PDF contents, if any, of) the troublesome file in a new document, then try the Pen Tool?
If that works, you most likely have a corrupt file.
One thing often tried first is to create a new document and File>Place the (PDF contents, if any of the) corrupted one, as already suggested above, to see how much may be rescued that way.
Here are some websites where you can see whether it can rescue the actual file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
http://www.illustrator.fixtoolbox.com/
As far as I remember, the first one is for Win and the second one is for Mac, while the third one should be for both.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html

Multiple open paths using pen tool

I use the pen tool to ink my artwork in Photoshop. When I upgraded to CC, I found that I can't use ESC to create a new path. It just continues with the original path. I either have to add the stroke then, delete that path, and then start a new one or select the direct path tool, click somewhere on the screen and then go back to the pen tool. This is slowing down my workflow. Is there any way to shut off this auto-anchor?

A work around for the current behavior would be to press command/control key (to access path select tool) and click instead of hitting escape to deselect the last point on the current sub path and start a new one.

The feature that i need most...do not activate paths with pen tool

If you have to add one thing in illustrator...
Make optional NOT to add new paths to an unselected anchor point with the pen tool.
I never want to activate paths with the pen tool
Arrow tool=select
Pen tool= add new points
If i want to add new segments to a path, i'd select it first a selection tool.
To my knowledge, Illustrator is the only vector application that doesn't follow this convention
In theory,activating the paths with the pen tool should speed the drawing: However when working with illustrations that combine open and closed paths, or if we want to start a new line from an anchor point, we have to lock, unlock or put in layers in order to avoid to activate unselected paths:
That's very slow and frustrating, specially when in other apps, you can create complex illustrations in just one layer and with no lock/unlock due a more precise control over the paths.
I have mentioned this feature before, but every time i face a project with a mix of open and closed paths, is a major problem
Please change this behaviour or at least, make it optional.

Yes, it has to be removed in two places and someone who has the authority might take action upon my mentioning it again.
Here is a link on syncing - http://support.apple.com/kb/HT1386nHave a read. Someone who uses the Books tab often might give you a step by step guide. Meanwhile, you can email yourself a PDF to keep you going. If it is a one page PDF it will be shown as opened in the email on your iPad. Press on the centre of it to save it to ibooks.If it is more than one page it will be shown as an icon; press on it for the prompt where to open it and choose iBooks, or whatever. I use Goodreader as it has a superior file management system. It costs very little.
Here is the link fo the iPad User Guide should you not already have it. You can download it to iBooks - http://support.apple.com/manuals/#ipad
Finaly, get more help by clicking on iPad Support at the top of the index page on this forum.

Lost bezier handle on closing path with pen tool

Can any of you please instruct me how to avoid losing the first point’s backwards bezier handle when closing a path with the Pen Tool?
This is a longtime annoyance for me, but I cannot rule out that I simply have failed to find the proper way of turning off this behaviour.

I just did!
See my last post with the picture. I rotated not just the anchor point but the straight line that it was coupled to.
Steve.
Steve, you can rotate anchorPoints and adjacent straight segments all day long, and you will still not be replicating the behavior and intent of FreeHand's Connector Points.
We're not talking about rotating straight segments here. (I would hope that everyone knows you can do that.)
Forget rotating things. Draw a path with a curved segment and an adjacent diagonal straight segment. The straight segment has no extended handles; only the curved segment does. Now adjust the length of the handle of the anchorPoint that joins to the straight segment in such a way that you cannot break tangency of the curve with the straight segment. In other words, the handle is always constrained to the angle of the adjacent straight segment.
Don't bother coming back with the workaround of scaling the handle. That still does not ensure tangency.
Example: This is Fontographer (FreeHand's progenitor). The highlighted point at the bottom of the motorycycle's skid plate is a Corner Point. The segment to the left of it needs to be curved, while maintaining perfect tangency with the straight segment to the right of it. In the inset, the Corner Point has been converted to a Tangent Point, and its handle is being dragged out (all with one selection tool, I might add.) The handle cannot be dragged out at any angle other than that which is tangent to the right segment.
That's just an example of converting a pre-existing Corner Point to a Connector Point. But now consider ensuring tangency fluidly as you draw with the Pen. In Illustrator, click to place a CornerPoint. Click or clickDrag to place a second anchorPoint oriented at any angle from the first point such that you are guaranteed that the first segment is straight, and that the next segment will be curved and tangent to the first segment. Can you do that in Illustrator?
While we're at it, note that in FOG, as in FH, you always know what kind of point you are dealing with. Corner Points are displayed as squares, Curve Points as circles, and Connector Points (Tangent Points in FOG) as triangles (regardless of whether their handles are extended or retracted).
JET

One point circle path with pen tool

I have heard or people drawing a circle path with one point and dragging or something like this. I would really like to be able to do this! Is this possible?

Absolutely just hold down the shift key while dragging one of the ellipse tools. Add the Alt|CMD key then circle center will be where you start dragging from. Marque ellipse tool or ellipse tool. Selection can be turned into path. But the Ellipse tool is better for its a vector tool. Can create shapes layers, Paths and fill pixels... Pen Tool circle is hard but you can use the pen tool to edit the circle path created with the ellipse tool.

Path with Pen tool- Color

Is there a way to enhance (change color) of the path generated with the Pen tool. I don't mean "stroking" the path after the path is completed. I mean the original outline of the path with the Pen tool. I have a rather completed photo which I am having trouble seeing the path as I am generating the path.
Thanks.

Hi
I think I see what you mean... it is a fine line and unlike in other applications, I'm pretty certain I'm correct that you cannot specify a colour for it.
I can only suggest, and I don't know if this will help, but you could make the layer your complicated photo is on temporarily less opaque so: lighter in effect. Not actually lighter and not a permanent change you understand. I don't know how well you know PhotoShop so if you need me to explain exactly what to do, just say, no probs. I'll explain, it's easy.
I'm not sure it will help, but it's all I can think to suggest I'm afraid. I'm sure if anyone has a better idea, they'll be along soon to tell you about it :-)
Edit... ah... just beaten to it by Marlo with a better idea, lol.

Linking two different paths with pen tool or other: HOW?

The question is simple yet important: I have drawn path 1 and
path 2. I want to joint them, the way you join in every graphic
application like Illustrator (cmd+j) or FreeHand. If I try to clik
on the ending point of one of them nothing happens and I can't find
a command to join them in some other way.
So, does someone have any suggestion or shuld I think taht
this is impossibile to obtain?
Thanks

Flash's drawing engine is different than other vector drawing
programs. Easiest way in flash is to
use the Selection tool (black arrow) and turn on "snap"
(little magnet icon). Then drag one point
close to the other and they will snap together ;)
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
iTinette wrote:
> The question is simple yet important: I have drawn path
1 and path 2. I want to
> joint them, the way you join in every graphic
application like Illustrator
> (cmd+j) or FreeHand. If I try to clik on the ending
point of one of them
> nothing happens and I can't find a command to join them
in some other way.
> So, does someone have any suggestion or shuld I think
taht this is impossibile
> to obtain?
>
> Thanks
>

Pen tool - feather

Hi,
If I draw a closed path with pen tool that has sharp angles and then make a selection out of it I always end up with a feathered selection.
How do I make the selection follow the path exactly?
Thanks,
Martti

after you made a path, go to the Paths panel and with a path selected Alt+click on the Load Path as a Selection button or select Make Selection from the fly-out menu and set the feather to 0

How to Extrude a path created with Pen Tool

Hi All
I have created a path with the pen tool (the brown part), and now I want to extrude it, but it extrudes the whole containing block (See image below)
Now I have tried everything, from grouping to compound paths etc, but nothing works.
How do I extrude my path?
Thank you

...and Texturized it AFTER the extrusion....
Applied a Grain Texture after the extrusion.
For clarity:
Always pay attention to the Appearance palette. The order of the items in the Appearance stack reflects the order in which they are applied.
A so-called "live effect" (of which both 3D Effect and Grain Texturizer are examples) is an operation which is automatically re-applied after you make an edit to the object to which it is applied. The effects are applied in the order in which they appear in the Appearance stack, from top to bottom.
1. Ellipse Tool: Draw an ellipse. Leave it selected.
2. Apply 3D Effect.
3. Apply Texturize Effect.
Look at the Appearance palette. 3D Effect is listed above Texturizer, and the whole 3D rendering is texturized.
4. Appearance palette: Drag 3D Effect to below Texurizer. The unwanted extrusion of the entire texture image appears.
JET

How do i select everything under my pen tool path.

I have made a path with my pen tool around an image that i desperately want. But if i delete the pentool path everything underneith stays alive. They are both in the same layer so i do not know how to do it. Any help?
Yours sincerely,
Joep

Joep,
My guess is that you will obtain the desired appearance if you select both the Pen Tool path and the image and Object>Clipping Mask>Make (Ctrl/Cmd+7).
That will show what is beneath the path and hide what is outside it.

Pen tool/path and content aware spot healing brush to remove cables (CS5)

Tried to remove some cables from an image using Russel Brown's video making use of the pen tool/path and the spot healing brush with content aware. I'm pretty sure I followed his tutorial exactly but it did not work satisfactorily. Are there any other tweaks I should be using to remove these cables and replace them with the background details?

Yes to all.
Silkrooster - Looks great! However, I believe spot healing brush was the first I tried and got smudgy results, especially in area of the locks where there is a lot of detail behind the cables. Found the patch tool works best, but not where there is a lot of detail behind the cables.
Fosse - Well, the bow of the ship going through the Panama Canal at 6 AM in the morning is a popular place, very crowded, and not one of them a photographer. I was lucky enough to get the last spot which was dead center, but in front of the cables. I tried to prevail on some people next to me to trade spots, but none were willing ($##$!!!&& b---ds) and they didn't even have cameras. However, will keep your suggestion in mind about taking two shots for the next time...and will have to get up earlier.
I think if I want to really make this work, I will have to do a lot of work, probably using a combination of all these methods.
Thanks to you all.
By the way, Re my question on screens without a reply button...when I click on a response, it appears without any reply button. How do I get a screen showing the reply button without entering a new question, cancelling out of it, and then clicking on a response, which is the only way I found to get a screen showing the reply button.

Smooth path tool (for pen tool).

Hello, all.
I believe I remember using this tool or function in the past but can't seem to find it now.
In the past I have traced the outline of an image using the pen tool by placing as many points along the countour or outline as possible. Once I closed the path the appearance was not perfectly smooth. I remember using a tool after that to smooth the path that would eliminate any uneven or jagged edges and make the curves really smooth.
Does anyone know how to do this in CS6?
Thank you in advance.

Hi, DrStrik9.
Perhaps I didn't explain it well enough.
I have tried using bezier curvers and the method you describe but found the process a little tedious and time-consuming.
The method I used before required the placement of as many points along the outline as practically possible with a path smoothing tool to smooth the closed path (it may work with open paths too). My memory tells me I used this technique with the pen tool but it may have been a different drawing too.
Are you aware of a path smoothing method like the one I described?
Thanks in advance.

Re: Mysterious paths in pen tool appearing!

Similar Messages

Maybe you are looking for