Re-named NEF & jpg files in CS4 Bridge & they turned into "exec" files!?!? SOS

SOS!!! I just re-named NEF & jpg files in CS4 Bridge & they turned into "exec" files (& the WEDDING GIG images disappeared!) HELP PLEASE, anyone who knows the solution. I'm desperate.

God bless you!…I tried it with the 1st 2 files, which were NEFs & it worked. BUT I started with Raw & then shot mostly jpg…cannot "see" anything & am clueless as to which are which / any other ideas?

Similar Messages

File folders turn into exec files

On a school iMac, I created folders which contained html, jpg, pdf files and other folders. I copied these folders to my thumb drive (the one I use all the time). When I got home, I put this thumb drive into my iMac (Yosemite OS) to finish the folder transfers. When I found the folders I was looking for, they had turned into exec files. What happened?

We need some clarification here. Specifically, you say:
When I found the folders I was looking for, they had turned into exec files.
What turned into "exec" files? The folders, or the files inside them? And when you say they are "exec" files, what exactly are you seeing?
One possibility is that the files you created have all changed to look like this:
If that's the case, then most likely you have somehow created those files without an extension, which means that Mac OS X has no idea what they are. You need to add an extension at the end of the filenames: .html, .jpg, .pdf, etc.
One other possibility, which Tim mentions, is that you have connected this flash drive to a Windows PC that is infected with some kind of malware that has replaced all those files with malicious .exe files. These would not affect your Mac, but would certainly affect the data on the flash drive. Do the filenames end in .exe or .lnk?
If none of that matches what you're seeing, we'll need more details. Screenshots would help. Make a screenshot by following the directions here:
http://support.apple.com/kb/HT5775
Be sure no sensitive personal information is displayed. To add that image to a post here, click the camera icon in the post editor toolbar.

When syncing iPhone 4 with new update songs turn into "other" files

Hello,
Yesterday i upgraded the iphone software to ios7, after doing this everything was working well but when it tried to sync my music files from itunes it said it was syncing music file until the iphone had synced completely when they turned into "other" files. I ahve tried restoring it but nothing has worked and it keeps happeneing. Was wondering if anyone was also having this problem and could point me in the right direction.
Thank you inadvance.

So far there is no fix, there are many threads on this topic and many people with this problem. We are all ticked off and Apple needs to fix this ASAP. They don't seem to care.

Good afternoon ladies and gentlemen! My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In t

Good afternoon ladies and gentlemen!
My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.

<moved from Adobe Creative Cloud to Bridge General Discussion>

No Microsoft files listed in the settings "convert into PDF files"

Hi, I wanted to convert different Microsoft Office files, but it doesn't work. There are no Microsoft files listed in the settings "convert into PDF files". I had the trial version of Adobe Acrobat Pro XI installed on a MAC in Windows that runs trough Parallels. Hope somebody can help. Thx

Hi Rahul,
many thanks for your suggestion.
Yes, Parallels is a virtual machine on the top of MAC and I can see all files in the Windows Explorer. Also the ones I created on the MAC top with the Microsoft Office Software Word or Excel for MAC as well the ones I created earlier on a Windows PC.
Unfortunately there is no possibility to convert files into PDF format with a click on the right mouse. And Adobe also doesn't open Word documents because it doesn't support this format.
But nonetheless it wouldn't be a solution that I prefer to convert in adavance every single file in a PDF format. I need to create a PDF package from different formats.
I assume this issue has to do something with MAC or Parallels, because this function of the Adobe Versions Acrobat 8 Pro and XI Pro work well on a Windows PC. I just don't understand why there are no Microsoft Office file formats listed in the Adobe settings. This settings also can't be changed. I tried to find out but couldn't find any hint for this problem thus I'm a bit at a loss... Maybe you have another idea?
Regards
Ly

Files in my pen drive somehow turned into .Ink files.

Files in my pen drive somehow turned into .Ink files. They were working fine before that, and i only used my macbook. Did not copied any windows files and i didn't use a pc. How can i get my files back?

No, i don't have windows in my MB.
I did use this pen drive in a pc, but only to get some files that had nothing to do with the files that were already there. Do you think this may have turned my other files into .Ink files?

After deleting some unnecessary Apps in my Macbook Pro, I plugged my thumb drive to discover that I can't open my files, which I normally can, because they've turned into ".lnk" files. Please help.

I have files in my thumb drive that I cant open. Inside my thumb drive, I've organized files in folders but I have files I havent put in folders yet. Those files turned into .lnk files.
My theory is, my thumb drive caught a virus from another laptop because I copied files from my colleagues laptop.

There are no viruses for a Mac, new theory required. .lnk files are aliases to a file, what did you delete?

All files on USB turn into .ink files

Whenever I put a flashdirve on my macbook all the files and folders on the usb turn into .ink files and I cant open them on a mac. I need to solve this problem ASAP because Im afraid to put my hard disk and loose all the files on it. This happened to 4 of my USBs and i have no backup of some of the stuff on them.

I spoke with the techs at apple support, they likewise were stumped. His suggestion was that I reformat the drives as Mac OSX journaled. He thought the FAT32 may have been the issue as it is not natively supported by the Airport Extreme, but also was not positive since it is one specific folder out of 500 or so on my drive that is having the problem... he thought it may be the content. Unfortunately, the content in that folder is not different from any other folder on the drive. It is set to use accounts and not a single password. All the settings for permissions, etc are correct to allow anyone to access/read/write to the drive and folder... really baffled.
Going to try formatting the drive and then giving it another go.
thank you

Why the RAW files appear as exec files in CS4 Bridge?

I'm wondering how I can make my RAW files visible in CS4. I'm using the new iMac 10.8.3. Everything worked well in Tiger.

Canon 7D and 5D III
I believe you mean that only some files appear as 'exec', just a rounded rectangle icon with grey gradient and top left corn in green 'EXEC', the file extension shows '.CTG'. This is the file that sorts stuff on the CF card and you can safely delete this or simply ignore once the files have been imported on your computer.
If you check the file size of this icon you will see it has only a couple of 100 bytes, depending on the amount of files you have shot on one day or session so not even 1 kb while your Raw files will probably are around 15 or 20 MB in file size

How to get CS4 Bridge Photo Gallery into Dreamweaver?

I am a photographer who is new to Dreamweaver. I followed instructions and created a web gallery in Photoshop CS4 bridge. How do I get that into Dreamweaver???????????

Open DW.
Define your site.
Close DW
Put all the stuff that Bridge spews out into site folder - without changing the file structure.
Open DW
The tickiest part to this if you're new to it all, is defining your site. After that, if you don't have a basice grasp of HTML and CSS Dreamweaver might just turn out to be a bit trickier yet.
If you are not so sure about defining your site, Google it. There are tutorials for it everywhere!
Martin

How can I access data on an external drive in my mac after all folders have been turned into .lnk files? I am desperate!

I don't know what happened, I connected my external hd today and all files had been turned into that!

I know I am going to sound really stupid when I ask this, but how do I do that? There was this folder called Recycle Bin, which I have deleted already but the files are still in the same format. I know they are in the HD 'cause of the space taken up in it, but I would like to know exactly what to do to clear the malware altogether and have access to the stuff I have again.
Thank you very much in advance and sorry for being such a dummy

Processing files in the order they were placed using file adptr in 10.1.3.4

Dear experts,
Do we have an option for File adapter, whether it can process the files in the order they were placed on the mount directory.
Scenarios is: we have a third party system which generates a file for every 1 min. In case when BPEL service is down for sometime then files are getting accumulated and the moment we turn the service on, it is not processing files in the order they were created.
But the system to which we are sending file data, it needs data in order.
We are using soa suite 10.1.3.4.
Regards
PavanKumar.M

HI Pavan,
I doubt if any such function is there.
-Yatan

CS4: cursor has turned into three different "figures" in line. How to fix? [was:janeriklindqvist]

The cursor in my CS4 has turned into three different "figures" in line. This makes the program almost impossible to use and I cannot fin a way to come back to the normal "cross" again.

What’s your OS?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by pressing command-alt-shift/ctrl-alt-shift while starting Photoshop until the appropriate dialog appears after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)

My files have turned into Unix files!

I recently began transfering my sound libraries from a drive on my old G4 Dual 1.42Ghz to the drive on my "pre-owned" Dual 2.0Ghz G5.
I had a folder on my G4 with Rex files in them.
When I transfered them over to the G5, I noticed they had become Unix exec files? What are those? I think the files got swithced from Rex1 to Rex2 files, but I'm not 100% sure. How do I get my Rex files back for use in Logic and Reason etc....
Thanks
Noah

I realize what it is. The Unix info is there until I install the application that created it. It shows the extention .rx2 but the file icon displays it an 'exec' file.
I've been switching everything over to my G5 and had not installed Recycle yet. Those Rex files were all created with Recycle. Once I installed Recycle and opened that folder again, they all had the blue Rex/Recycle icon. They were fine.
It would be great if Logic could read the exec/Unix/.Rx2 files, in case I didn't need or want to install Recycle? Which I didn't, cause I don't use it much anymore. I tried to drag the Unix/exec/.Rx2 file into Logic but it wasn't recognized. After all, Logic does play Rex files...
Hey, I answered my own question!
Noah

MPEG-4 video's turned into audio files

I installed a phrasebook from coolgorilla, and after that all but 4 of my video's weren't in the video section anymore, but they were all on my ipod and they were shown in iTunes as MPEG-4 files,however the video options in the settings weren't there, is there any way to get them to go back to video's?

I am using the latest version of itunes as well.
Let me make my problem a little clearer. The files are no longer on my ipod under the menu heading "Video" they have moved to "Music".When I try to play one of the moved files on my ipod it plays it as an audio track. I always keep my video settings as ask but the ipod isn't even recognizing these files as video files anymore.
When I try and play the file in itunes it plays properly . I should mention that the little TV icon that used to be next to the file to show that it is a video file has disappeared.
In my tinkering around I am thinking this is an itunes bug that for some reason my itunes stopped tagging these files as video files ...Gonna try reinstalling itunes.I will update if I find a fix.
Windows XP

Re-named NEF & jpg files in CS4 Bridge & they turned into "exec" files!?!? SOS

Similar Messages

Maybe you are looking for